Raymarine CP470/CP570 Transducer Extension Cable - 5M
Shipping (3PM)
Within 30 days
Raymarine CP470/CP570 Transducer Extension Cable - 5M Product Description
CP470/CP570 5m Transducer Extension CableExtend Your CHIRP Sonar Reach with Confidence
Picture this: you're out on the water, chasing that perfect fishing spot or navigating tricky shallows, but your transducer cable just isn't long enough to reach your ideal mounting spot. That's where the Raymarine 5-meter extension cable steps in, designed exclusively for CP470 and CP570 CHIRP sounder modules. This 11-pin cable gives you the flexibility to position your sonar transducer exactly where it performs best—whether that's farther aft on the hull, amidships for better water flow, or even up on the console for easier access.
Crafted from tough, marine-grade materials, it withstands constant exposure to saltwater spray, UV rays, and the relentless pounding of waves. Boaters trust it because it maintains crystal-clear signal integrity, ensuring your CHIRP sonar delivers precise fish arches, detailed bottom contours, and accurate depth readings without dropouts or interference.
Engineered for Real-World Boating Demands
- Seamless Signal Transmission: The 11-pin connector locks securely, preserving every bit of high-frequency CHIRP data for superior target separation and bottom discrimination.
- Flexible Installation Options: At 5 meters (about 16.5 feet), it bridges the gap between tight engine bays and open deck spaces, letting you customize your setup without signal loss.
- Battle-Tested Durability: Double-shielded wiring resists electromagnetic interference from motors and electronics, while the rugged black jacket shrugs off abrasion from lines, gear, and foot traffic.
- Plug-and-Play Simplicity: No soldering or adapters needed—just connect and go, saving you hours on the water or in the yard.
- Peace of Mind Protection: Backed by Raymarine's commitment to reliability, it holds up season after season in harsh conditions.
Perfect Fit for CP470 and CP570 Systems
This extension cable is tailor-made for Raymarine's CP470 and CP570 CHIRP modules, integrating flawlessly with popular chartplotters like the Axiom series, eS, or gS platforms. It's ideal for offshore anglers needing wide-coverage scanning, wreck divers mapping structures, or cruisers tracking underwater hazards.
Quick Installation Guide
- Power down your system and disconnect the existing transducer cable from the CP module.
- Align the 11-pin connectors—note the keyway to prevent misalignment—and push firmly until it clicks.
- Route the cable along secure paths, using zip ties or conduits to avoid chafe points near props or rudders.
- Test the system: Run a sonar benchmark scan to verify clear images and no artifacts.
- Seal all connections with marine silicone if exposed to heavy washdown.
Pro tip: For stepped hulls or multihull setups, this length strikes the sweet spot—long enough for versatility, short enough to minimize voltage drop or noise pickup.
Unlock Better Sonar Performance On Any Vessel
Whether upgrading a compact center console or outfitting a larger sportfisher, this cable adapts to your boat's layout. Mount your transducer deadrise-optimized for laminar flow, and let the extension handle the distance. Anglers report sharper bait schools and bottom hardness readings, turning good trips into legendary ones.
Maintenance Essentials
Keep it performing like new: Rinse with fresh water after every saltwater outing, inspect for nicks annually, and store coiled loosely to prevent kinks. Avoid sharp bends under 4-inch radius to protect internal conductors.
Frequently Asked Questions
Is this extension cable compatible only with Raymarine CP470 and CP570?
Yes, it's specifically engineered for the 11-pin connectors on CP470 and CP570 CHIRP sounder modules, ensuring optimal performance without adapters.
Will extending the cable affect sonar image quality?
No, the shielded design maintains signal integrity up to 5 meters, delivering the same high-resolution CHIRP imaging as a direct connection.
How do I know if my transducer matches this cable?
Check for the 11-pin blue connector on your CP470/CP570 transducer lead. This cable matches that exact interface.
Can I use this cable in saltwater environments?
Absolutely—its marine-grade jacket and connectors are built to resist corrosion, UV damage, and abrasion in harsh offshore conditions.
What's the best way to route the extension cable on my boat?
Route away from high-voltage sources like engines, secure with ties every 18 inches, and avoid sharp edges. This prevents interference and wear.
Does it work with dual-channel transducers?
Yes, it supports the full CHIRP capabilities of compatible dual-channel setups on CP470/CP570 for simultaneous high/low frequency operation.
How long is the cable exactly?
It's 5 meters long, equivalent to roughly 16.5 feet, providing ample reach for most hull configurations.
For more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.
Raymarine A102150 Attributes
- Used To: CP470/ CP570 CHIRP Transducer
- Number Of Pins: 11
- Length: 16.5 Feet
- Color: Black
Raymarine A102150 Features & Benefits
- High-Performance Products Proven In The Harshest Of Environments
- Built To Last Longer Life
- Rugged Design And Reliability
- Easy To Use
- Limited 2 Year Warranty
Raymarine A102150 Warranties
CP470/CP570 Transducer Extension Cable - 5M
Raymarine's 5M transducer extension cable specifically for CP470 and CP570.
The product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...
Frequently Asked Questions (FAQ) About Raymarine CP470/CP570 Transducer Extension Cable - 5M
Who is the Raymarine?How to describe Raymarine CP470/CP570 Transducer Extension Cable - 5M?
What is the type of the product?
What's the Raymarine CP470/CP570 Transducer Extension Cable - 5M package dimensions and weight?
What's the color of Raymarine CP470/CP570 Transducer Extension Cable - 5M?
What is the manufacturer notes about Raymarine CP470/CP570 Transducer Extension Cable - 5M?
Who is the Raymarine?
How to describe Raymarine CP470/CP570 Transducer Extension Cable - 5M?
What is the type of the product?
What's the Raymarine CP470/CP570 Transducer Extension Cable - 5M package dimensions and weight?
What's the color of Raymarine CP470/CP570 Transducer Extension Cable - 5M?
What is the manufacturer notes about Raymarine CP470/CP570 Transducer Extension Cable - 5M?
Save $10 when you buy the Raymarine CP470/CP570 Transducer Extension Cable - 5M for only $79 from NVN Marine! Same day shipping before 3pm.
Raymarine CP470/CP570 Transducer Extension Cable - 5M Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Raymarine |
| Weight: |
1.15 lb |
| Type: |
Extension |
Raymarine CP470/CP570 Transducer Extension Cable - 5M User Reviews
Raymarine CP470/CP570 Transducer Extension Cable - 5M Shipping & Return
| Shipping Weight: |
1.15 lb |
|---|---|
| Box Sizes: |
2.00 (h) x 9.00 (w) x 12.00 (l) |
| Cubic Feet: |
216.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.