Raymarine HV-300TH Plastic Transducer Thru-Hull - 6M Cable
Raymarine HV-300TH Plastic Transducer Thru-Hull - 6M Cable — Product description
Imagine peering beneath your boat with unprecedented detail, spotting fish schools, mapping the seabed, and navigating shallow waters like never before. The Raymarine HV-300TH thru-hull transducer transforms your marine electronics setup into a powerful sonar system, blending multiple imaging technologies into one compact plastic housing. Perfect for anglers chasing structure-hugging fish or cruisers scanning for hazards, this transducer delivers lifelike underwater views that standard sonars can't match.
Unlocking Crystal-Clear Sonar with HyperVision Technology
At the heart of the HV-300TH lies HyperVision's innovative multi-frequency design, operating at 200 kHz high CHIRP for traditional fishfinding, 350 kHz CHIRP for enhanced side and down imaging, and a razor-sharp 1.2 MHz for HyperVision modes. This setup pumps out 1000 watts of power, reaching depths up to 600 feet in DownVision mode or 300 feet with stunning RealVision 3D clarity.
- RealVision 3D: A 180-degree beam angle paints photo-like 3D images of wrecks, reefs, and fish in their natural environment—ideal for pinpointing bait balls amid complex bottom structure.
- DownVision: 60-degree beam slices straight down, revealing every contour and critter with hyper-detailed resolution for bottom fishing pros.
- SideVision: Scans port and starboard up to impressive ranges, helping you locate drop-offs or schools lurking off to the sides without repositioning.
- Conical CHIRP: 25-degree beam at 200 kHz excels in target separation, marking individual fish even in heavy cover.
Unlike single-frequency transducers that force trade-offs, the HV-300TH runs all modes simultaneously, giving you a complete picture without menu diving. Its plastic construction suits fiberglass hulls up to moderate speeds, and the included fairing block ensures optimal water flow for distortion-free returns.
Seamless Thru-Hull Installation for Peak Performance
Mounting the HV-300TH requires a clean thru-hull hole—typically 2 inches in diameter—but the payoff is huge in signal quality over transom alternatives. Position it forward of props and strays for minimal interference, deadrise angle-matched via the fairing block (up to 20 degrees). The 19-foot cable reaches most helm stations, and its rugged IPX6/IPX7/IPX8 ratings shrug off splashes, submersion, and pressure.
Pro tip: During install, mix marine sealant around the hull fitting to prevent leaks, and angle the transducer parallel to the waterline at displacement speeds. Pair it with Raymarine Axiom multifunction displays for plug-and-play integration, unlocking software updates that refine imaging over time.
Why Boaters Swear by the HV-300TH for Everyday Adventures
For inshore anglers, HyperVision's high-frequency magic separates grass from gamefish in murky bays, while offshore explorers map ledges with 3D precision to anchor on sweet spots. Sailors appreciate the SideVision for avoiding uncharted rocks in coastal hops. Compared to bronze models, the plastic version resists corrosion in freshwater and cuts weight—key for trailerable rigs.
"Switched to HyperVision and it's like sonar grew eyes—fish that hid before now light up in 3D." – Experienced charter captain feedback echoed across forums.
Maintenance is straightforward: Wipe clean after salty trips, inspect the face for marine growth, and store dry in off-seasons. This transducer's blend of depth, detail, and durability makes it a long-term upgrade, not a disposable add-on.
Frequently Asked Questions
What hull types work best with the Raymarine HV-300TH plastic transducer?
It's optimized for fiberglass and plastic hulls on planing or displacement boats under 40 feet. Avoid metal hulls, as they interfere with sonar signals; opt for in-hull or transom mounts instead.
Can the HV-300TH handle high-speed operation?
Best at planing speeds up to 30 knots with proper fairing. Above that, cavitation may blur images—slow down for HyperVision detail or switch to CHIRP mode.
How does HyperVision differ from standard CHIRP sonar?
Standard CHIRP excels at fish ID with wide cones; HyperVision adds 3D rendering, down/side scan at 1.2 MHz for bottom-hugging detail, all in one unit—no need for extra transducers.
What's the effective range in shallow water?
Shines in 5-100 feet with SideVision reaching 200+ feet laterally and DownVision imaging every inch below. Perfect for flats fishing or docking in shallows.
Does it require special display compatibility?
Designed for Raymarine Axiom series MFDs with built-in sonar modules. Ensure your unit supports HyperVision via firmware—older LightHouse models may need upgrades.
How do I clean and store the transducer?
Rinse with freshwater after use, gently scrub algae with a soft brush and mild soap. Dry thoroughly before winter storage to prevent pinhole corrosion on the face.
Is the fairing block adjustable for different deadrise angles?
Yes, the included block adjusts up to 20 degrees. Select the matching wedge during install for hull parallelism, maximizing beam coverage without dead zones.
The HyperVision 3D transducer provides a multitude of frequencies all within a single housing. Capable of simultaneously supplying RealVision 3D, DownVision, SideVision and Conical High Frequency CHIRP, this is the only shallow-to-medium depth transducer you'll ever need. 1.2 Megahertz HyperVision DownVision and SideVision frequencies offer the utmost in clarity and lifelike sonar imaging.
Raymarine A80604 Attributes
- Mounting Location: Thru-Hull Mount
- Depth: 300 Feet Maximum Depth At RealVision 3D/ 600 Feet Maximum Depth At DownVision
- Power Rating: 1000 Watt
- Frequency Range: 1.2 MHz CHIRP Frequency/ 350 kHz CHIRP Frequency/ 200 kHz High CHIRP Frequency
- Supported Angle: 180 Degree RealVision Beam Width/ 60 Degree DownVision Beam Width/ 25 Degree Conical Beam Width
- Cable Length: 19 Feet
Raymarine A80604 Features & Benefits
- HyperVision 3D Transducer Provides A Multitude Of Frequencies All Within A Single Housing
- Capable Of Simultaneously Supplying RealVision 3D, DownVision, SideVision And Conical High Frequency CHIRP, This Is The Only Shallow-To-Medium Depth Transducer You'll Ever Need
- HyperVision DownVision And SideVision Frequencies Offer The Utmost In Clarity And Lifelike Sonar Imaging
- IPX6, IPX7 And IPX8 Waterproof
- Limited 2 Year Warranty
Raymarine A80604 Warranties
HV-300TH Plastic Transducer Thru-Hull - 6M Cable
HV-300TH Plastic Thru-Hull Single (200kHz/350kHz/1.2MHz)
"RaymarineThis Hyper Vision? Chirp Transducer has options to fit any boat. It comes with 200k Hz\/350k Hz\/1.2MHz operating frequency and a 6 meter cable."
SKU: NVN-75002
MPN: A80604
UPC: 723193827550
Technical specifications
| Brand | Raymarine |
| Model | Raymarine HV-300TH Plastic Transducer Thru-Hull - 6M Cable |
| SKU / MFR# | 75002 |
Set product metafields under specs.* to populate this table.
Frequently asked questions
No questions yet. Got one? Drop us a line.
