Furuno 15M Radar Cable Assembly f/DRS2/4/6/12
Shipping (3PM)
Within 30 days
Furuno 15M Radar Cable Assembly f/DRS2/4/6/12 Product Description
Enhance your marine radar setup with the precision-engineered 15-meter radar cable assembly designed exclusively for Furuno's DRS2, DRS4, DRS6, and DRS12 digital radomes. This robust cable ensures reliable signal transmission between your radome and display unit, even in demanding offshore conditions where mounting the radar antenna away from the helm is essential.
Why Choose the 15-Meter Furuno Radar Cable?
In marine navigation, cable length matters. At 15 meters, this assembly strikes the perfect balance for mid-sized vessels, allowing flexible radome placement on arches, poles, or foredecks without signal degradation. Unlike generic extensions that introduce noise or attenuation, Furuno's OEM cable maintains peak performance with low-loss coaxial construction, shielding against electromagnetic interference from nearby radios or engines.
Crafted for longevity in harsh saltwater environments, it features double-shielded conductors, UV-resistant jacketing, and secure RJ45 connectors that resist corrosion. Boaters report fewer intermittent issues compared to makeshift solutions, keeping your radar feed crystal-clear during critical moments like fog navigation or fish-finding runs.
Key Specifications and Build Quality
- Length: 15 meters (49 feet) – ideal for extended installations
- Compatibility: Tailored for DRS2/DRS4/DRS6/DRS12 radomes
- Connectors: Factory-terminated for plug-and-play simplicity
- Durability: Marine-grade materials withstand submersion, abrasion, and temperature extremes from -25°C to 70°C
- Performance: Optimized impedance (50 ohms) for distortion-free radar pulses
Installation Tips for Optimal Performance
Route the cable along existing wire runs or through conduits to minimize bends sharper than 10cm radius, preserving signal integrity. Secure with non-abrasive ties every 50cm, avoiding heat sources like exhausts. Disconnect power before swapping cables to prevent static damage. For TZT or NavNet series displays, align the cable's keyed connectors to avoid cross-threading – a common pitfall that mimics faulty radar.
Pro tip: Test continuity post-install by powering up in transmit mode at short range. If echoes appear fuzzy, inspect for pinched sections from tight helm routing.
When to Replace Your Radar Cable
Spot early signs like sporadic target loss, increased sea clutter, or heading misalignment. Salt buildup at connectors often precedes failure, so rinse annually with fresh water. This assembly restores factory-spec performance, outperforming adapters that compromise refresh rates on high-speed X-band radars.
Real-World Benefits for Anglers and Cruisers
Fishermen mounting DRS radomes high for better horizon scans love the extra reach without amplifiers. Coastal cruisers benefit from its flexibility in retrofits, snaking through bulkheads effortlessly. Paired with Furuno's pulse compression tech, it delivers sharper images at 48nm range, boosting safety and efficiency on the water.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm.
Frequently Asked Questions
Is this cable compatible with all Furuno DRS radomes?
Yes, it's specifically designed for DRS2, DRS4, DRS6, and DRS12 digital radomes, ensuring seamless integration with Furuno TZTouch and NavNet systems.
How long is the Furuno 15M radar cable?
The cable measures 15 meters (approximately 49 feet), providing ample length for most boat installations without excess coiling.
Can I use this cable with other Furuno radar models?
No, it's optimized exclusively for DRS2/4/6/12 series. Other models like DRS4W require different assemblies.
Is the cable waterproof and suitable for marine use?
Absolutely. It features IPX6-rated connectors and saltwater-resistant shielding, ideal for open-water exposure.
What's the easiest way to install this radar cable?
Disconnect power, route through existing paths with gentle bends, and snap into keyed ports. No soldering needed for plug-and-play setup.
Will using a third-party cable work with my DRS radar?
Third-party cables may cause signal loss or incompatibility. Stick to OEM for reliable pulse transmission and warranty compliance.
How do I maintain the radar cable for long life?
Rinse with fresh water after saltwater exposure, inspect connectors for corrosion yearly, and avoid sharp kinks during routing.
15M Radar Cable Assembly for DRS2/4/6/12
This cable assembly is for Furuno's DRS2/4/6/12 Digital Radome.
Features:
- Radar cable
- 15-meter length
- Cable assembly
- Specifically for DRS2/4/6/12
!["Warning"]("https://productimageserver.com/prop65/6pt.png")
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
SKU: NVN-72591
MPN: 001-341-680-00
UPC: 611679364173
Save $10 when you buy the Furuno 15M Radar Cable Assembly f/DRS2/4/6/12 for only $374 from NVN Marine! Same day shipping before 3pm.
Furuno 15M Radar Cable Assembly f/DRS2/4/6/12 Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Furuno |
| Weight: |
8.1 lb |
| Type: |
Cables |
Furuno 15M Radar Cable Assembly f/DRS2/4/6/12 User Reviews
Furuno 15M Radar Cable Assembly f/DRS2/4/6/12 Shipping & Return
| Shipping Weight: |
8.1 lb |
|---|---|
| Box Sizes: |
6.00 (h) x 13.00 (w) x 13.00 (l) |
| Cubic Feet: |
1014.0 |
| Returnable: |
Yes |
| P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.