Rule 1100GPH Standard Bilge Pump - 12V

Rule 1100GPH Standard Bilge Pump - 12V Product Description

Our new small bilge pump range provides the ultimate pumping performance, now more efficiently than ever, delivering full rated flow at just 12 Volt instead of 13.6 Volt.

Rule 27DA Attributes

• Type: Submersible
• Voltage Rating: 12 Volt DC
• Flow Rate: 1100 Gallon Per Hour
• Port Type: 1-1/8 Inch
• Width: 2-3/8 Inch
• Height: 4-1/4 Inch
• With Thermal Overload Protection: Yes

Rule 27DA Features & Benefits

• Higher Flow – The Optimized Impeller Provides Greater Flow At The Same Amperage
• Built-In Thermal Cut-Off (TCO) Provides Added Protection For Pump And Vessel
• Backflow Prevention – The Non-Return Prevents Water Left In The Discharge From Running Back, Keeping Bilges Dryer And Cleaner
• Air Vents – Built Into The Body, They Help Prevent Air Locking In Challenging Plumbing Installations
• Offer A Straight Or 90 Degree Ports To Suit Your Installation
• Limited 3 Year Warranty

1100GPH Standard Bilge Pump - 12V

Customers talk about flow, they want the water out of the bilge, and
fast. Improved design and performance means that our next generation 1100GPH pump will produce this flow at just 12V rather than 13.6V as previously required...more typical of on board voltage supply.

Our next generation of Rule pumps include check valves and to do this, we've created hidden air vent to prevent airlocking. Under each strainer tab there is a small hole that vents any air trapped in the pump housing preventing airlocks...and that's how we do it.

We have true electromagnetic suppression (EMC). We have a built-in thermal cell that protects the pump and the vessel when things get too hot.

We've re-engineered the inside and outside of our bilge pumps, starting with a blank slate. And we're just getting started

Features:

• Non-automatic - used with a panel switch or Rule float switch
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Customers talk about traffic, they want water to flow out of the bilge, and at a faster rate. Improved design and performance means that our new 1100 GPH pump will only cost 12...

Rule 1100GPH Standard Bilge Pump - 12V Related Products

Rule ECO-Switch Automatic Bilge Pump Switch
Rule-A-Matic® Plus™ Float Switch
Rule-A-Matic® Float Switch
Rule-A-Matic® Float Switch w/Fuse Holder
BoatLIFE Silicone Rubber Sealant Cartridge - Clear
BoatLIFE Silicone Rubber Sealant Cartridge - White
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - Clear
BoatLIFE Silicone Rubber Tube - 2.8 FL. Oz - White




Save $24 when you buy the Rule 1100GPH Standard Bilge Pump - 12V for only $50 from NVN Marine! Same day shipping before 3pm.