Furuno 15M Power Cable f/DRS4W

Ensuring your Furuno DRS4W radar stays powered up during long days on the water starts with the right cable. This 15-meter power cable delivers steady, reliable energy to your radar dome, letting you focus on navigation without worrying about connectivity hiccups. Designed exclusively for the DRS4W, it bridges the gap between your boat's power source and the radar unit seamlessly, even in rough seas where vibrations and moisture are constant threats.

Why This Power Cable Matters for Your DRS4W Radar Setup

Marine radars like the DRS4W demand uninterrupted power to paint accurate targets, from distant vessels to hidden obstacles. A subpar cable can lead to signal drops or total blackouts, compromising safety. This genuine Furuno cable stands out with its rugged construction, shrugging off saltwater exposure, UV rays, and extreme temperatures. At 15 meters (roughly 50 feet), it offers ample reach for flexible mounting positions on masts, arches, or rails, without excess slack that invites snags.

Key Specifications at a Glance

• Length: 15 meters (50 feet) – Perfect for most vessel configurations.
• Connector: 3-pin female plug for direct, secure DRS4W connection.
• Color: Durable black sheathing blends with marine hardware.
• Compatibility: Tailored for powering up the DRS4W 4kW radome.

Real-World Benefits Backed by Furuno Engineering

Furuno's legacy in marine tech shines through here. This cable isn't just wire—it's built for the harshest environments, from pounding waves to scorching sun. Expect low voltage drop over distance, ensuring your radar performs at peak without dimming echoes. Installation is straightforward: plug-and-play design means no custom wiring or soldering, saving hours on the water. Plus, it comes with Furuno's commitment to quality, proven across decades of pro and recreational boating alike.

• Rock-solid performance in salt spray and storms.
• Flexible for tight runs through bulkheads or conduits.
• Minimal interference with other electronics like GPS or AIS.
• Easy to route and secure with standard cable ties or clamps.

Step-by-Step Installation Tips for Smooth Setup

Getting this cable online takes minutes if you prep right. Start by powering down your boat's electrical system. Route the cable from your power panel or battery switch to the radar location, avoiding hot exhaust paths and sharp edges. Use chafe protection at pinch points. Connect the 3-pin female end to the DRS4W's power port— it clicks in firmly. On the power source end, match to your 12V or 24V DC setup with inline fuses for safety. Test under load: fire up the radar and scan for clear, vibrant returns. Pro tip: Label both ends for quick swaps during maintenance seasons.

Maintenance for Long-Lasting Reliability

Keep it thriving with simple habits. After every outing, rinse with fresh water to flush salt buildup. Inspect connectors for corrosion—clean with a marine contact cleaner if needed. Coil loosely when stowed to prevent kinks. In off-seasons, store in a dry locker away from rodents. This proactive care extends life far beyond standard expectations, making it a smart spare for any serious boater's kit.

Frequently Asked Questions