Clipper Wireless Wind System Complete w/Display

Clipper Wireless Wind System Complete w/Display Product Description

Wireless Masthead & Data Box

The mast head transmitter is completely wireless and is supplied with a base unit, which is powered by the vessel's 12Vsupply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to any compatible NMEA display unit.

• Wireless wind speed and direction data to any compatible NMEA display The masthead transmitter requires only occasional bright daylight falling on the solar panel to top up its internal battery. It will operate for 2000 hours without further solar charging from its fu lly charged battery.
  
• Easy insta ll ation with mast in place no wires to run down
  
• Simple masthead alignment through base unit
  
• Light weight - 190 grams

Specifications:

• Sleep time > 15,000 Hours *
  
• Operating time > 2,000 Hours *
  
• Charging time < 150 Hours of bright daylight

* Fully charged with no further daylight

NMEA 0183 4800 Baud
0/P Level 0 to 12 volt
from 220 ohm source resistance.
NMEA data sentence MWV
Supply voltage 6 to 16 volts. (Nominal 12 volts)
Supply current 17mA
Fuse 1 Amp.

Display
Wind speed and direction data to any compatible NMEA device
The Clipper Wind Repeater disp lay is presented in the industry standard 11Omm square case. It boasts an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

Display Unit Spcifications

• Supply voltage Nomina l12V DC
  
• NMEA 0183 input sentence MWV
  
• 9 levels of display backlighting
  
• Display case size 110 x 11Omm
  
• Depth behind panel 30mm
  
• Consumption, 1OmA+ (1OmA for display illumination max)

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

The wireless mast and data box mast transmitter is completely wireless and is equipped with a basic unit that is powered by the ship’s 12v power supply. The basic unit receives the wind speed and wind direction data from the mast transmitter and sends it to Any compatible nmea display unit. The masthead transmitter sends wireless wind speed and direction data to any compatible nmea display, and only needs occasional bright sunlight to shine on the solar panel to power up its internal battery. It will run for 2000 hours, and a fully charged battery will not charge the solar energy. Simple header alignment through the base Light weight-190g Specifications: Sleep time 15,000 hours Working time 2,000 hours Charging time 150 hours of bright daylight Fully charged, no need for daylight nmea 0183 4800 baud 0 / P-level 0 to 12 volts from a source resistance of 220 ohms. The Nmea data statement mwv has a supply voltage of 6 to 16 volts. Nominal 12 volt power supply current 17ma fuse 1 ampere. Display the wind speed and wind direction data to any compatible nmea device, and the quick-cut wind indicator is displayed in the industry standard 11omm square housing. It has a large and clear display with 60 segments, which can fully display 360-degree directions. Display unit specification power supply voltage rating l12v dc nmea 0183 input sentence mwv 9-level display backlight display cabinet size 110 x 11omm depth of 30mm consumption behind the panel, 1oma 1oma is used for maximum display lighting.



Save $98 when you buy the Clipper Wireless Wind System Complete w/Display for only $470 from NVN Marine! Same day shipping before 3pm.