Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse
Shipping (3PM)
Within 30 days
Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse Product Description
Ensuring a reliable power connection is crucial when you're out on the water, where every system needs to perform flawlessly. The Furuno NavNet Power Cable Assembly steps in as a dependable solution, designed specifically for seamless integration with your marine navigation setup. This 5-meter cable, equipped with a 3-pin connector and a built-in 20A fuse, delivers stable power without the guesswork, helping you avoid those frustrating mid-trip blackouts that no skipper wants to deal with.
Key Features That Stand Out
- Generous 5-Meter Length: Provides ample reach for flexible routing around your vessel's helm or electronics panel, reducing clutter and easing installation in tight spaces.
- Robust 3-Pin Design: Matches perfectly with Furuno NavNet interfaces, ensuring a secure, vibration-resistant connection that holds up against the constant motion of boating.
- Integrated 20A Fuse: Offers essential overcurrent protection, safeguarding your valuable NavNet multifunction displays, radars, and sounders from power surges common in marine environments.
- Marine-Grade Durability: Constructed with high-quality, UV-resistant materials that withstand saltwater exposure, humidity, and extreme temperatures for years of reliable service.
Why This Cable Makes a Real Difference
Imagine heading into rough seas with confidence, knowing your chartplotter and fishfinder won't falter due to a shaky power link. This assembly isn't just wire—it's engineered to minimize voltage drops over distance, maintaining peak performance for your Furuno ecosystem. Boaters who've swapped out generic cables report fewer intermittent issues and longer equipment life, turning a simple accessory into a smart investment for safety and efficiency.
Effortless Installation for DIY Enthusiasts
Setting this up is straightforward, even if you're not a pro marine electrician. Start by powering down your system completely. Route the 5-meter cable from your power source—ideally a dedicated circuit breaker—to your NavNet hub, keeping it away from high-heat areas like engines. The 3-pin end clicks securely into place, and the inline 20A fuse slots easily for quick replacement if needed. Test with a multimeter for continuity, then fire up your displays. Pro tip: Use cable ties and conduit for chafe protection, extending its lifespan in pounding waves.
- Disconnect all power sources.
- Measure and cut any excess length if desired (though 5m is versatile).
- Connect the fused end to a 12V DC supply.
- Plug the 3-pin into your NavNet unit.
- Secure routing and test under load.
Perfect Fit for Your Furuno Setup
This power cable shines in NavNet networks, powering everything from compact black box processors to full-sized multifunction displays. It's a direct match for systems like the tzTouch series and beyond, handling the power demands of integrated radars, autopilots, and sonar modules without strain. If you're expanding your setup or replacing a worn-out original, this assembly ensures backward compatibility while supporting modern high-draw components.
Long-Term Care for Peak Performance
To keep things humming season after season, inspect connections annually for corrosion—especially in saltwater use. Wipe terminals with electrical contact cleaner and apply dielectric grease for moisture barriers. The 20A fuse is user-replaceable; always match specs to avoid mismatches. Stored properly during off-seasons, this cable resists cracking, ready for your next adventure.
Frequently Asked Questions
What makes this Furuno NavNet power cable different from standard marine cables?
Unlike generic cables, this one features a precise 3-pin connector tailored for NavNet systems, a 20A fuse for targeted protection, and 5 meters of optimized wiring to prevent voltage loss, ensuring your electronics run smoothly even under heavy load.
Is the 5-meter length suitable for most boats?
Absolutely—5 meters offers flexibility for center consoles, sportfishers, and yachts, reaching from battery banks to helm stations without excess slack that invites damage.
Can I replace the 20A fuse myself?
Yes, it's designed for easy inline replacement. Just power off, pull the old fuse, insert a matching 20A fast-blow type, and you're back online—safer than soldering alternatives.
Will this cable work with older Furuno NavNet models?
It provides reliable compatibility across generations, from legacy NavNet vx2 to current tz3 models, maintaining consistent power delivery for mixed setups.
How do I protect the cable from saltwater damage?
Route it through dripless glands or conduit, seal ends with marine grease, and rinse with fresh water after use. The UV-resistant jacket handles exposure well with minimal upkeep.
Does it support high-power NavNet accessories like radars?
Yes, the 20A rating and low-resistance design comfortably powers radar domes, high-definition sounders, and multiple displays simultaneously.
What if my boat has a 24V system?
This is optimized for standard 12V DC marine systems. For 24V, use a voltage converter to step down and protect your NavNet gear.
- 5 Meters
- 3-Pin
- 20 Amp Fuse
3-pin-20A fuse conditions: The product is brand new, unopened, and sealed in its original factory packaging.
Frequently Asked Questions (FAQ) About Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse
Who is the Furuno?How to describe Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse?
What is the type of the product?
Who is the Furuno?
How to describe Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse?
What is the type of the product?
Save $4 when you buy the Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse for only $205 from NVN Marine! Same day shipping before 3pm.
Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Furuno |
| Weight: |
2.35 lb |
| Type: |
Power Cords |
Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse User Reviews
Furuno NavNet Power Cable Assembly - 5M - 3 Pin - 20A Fuse Shipping & Return
| Shipping Weight: |
2.35 lb |
|---|---|
| Box Sizes: |
2.00 (h) x 10.00 (w) x 12.00 (l) |
| Cubic Feet: |
240.0 |
| Returnable: |
Yes |
| P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.