OUT OF STOCK

Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs

Free Ground Shipping (2-6 Days Delivery Time)

SKU: 44318 - UPC: 628309134785 - MPN: OCTAF1212LAM12
It will be shipped by UPS Ground.
$2,009.99 $2,698.86 ( / )

We are sorry, this product sold out!

The Octopus 12" Stroke Mounted 38mm Linear Drive 12V is an electric linear drive that provides up to 60' of linear travel. The drive can be mounted in the vertical or horizontal position.
Octopus Autopilot Drives
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs Product Description

Linear Actuators
OCTAF1212LAM12

An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.

Features

  • Average Current 4-6 amps
  • Max Current 19amps
  • 12vDC
  • Cylinder Bore: 38mm
  • Variable Flow Rate: 600cc-1.2 litre/min
  • Stroke: 305mm/12in
  • Hardover Time(Suggested): 14-16 sec
  • Max Rudder Torque: 1,200Nm/10,600lbin
  • Peak Thrust: 400Kg/882lbs
  • Max boat Length: 18m/60'

    Linear actuator OCTAF1212LAM12. The octopus hydraulic linear actuator is a simple and effective method for driving the rudder on a ship equipped with a mechanical steering system. The linear actuator is a component of the octopus reversing pump and the marine hydraulic cylinder. The component is installed on the tiller or quadrant. When the autopilot is not used, the hydraulic cylinder runs freely with the rudder. When using automatic pilot, the solenoid valve on the actuator closes and locks the cylinder. The pilot's steering signal is now fed to the DC motor, which drives the pump to move the cylinder back and forth. After the power is cut off, the solenoid valve immediately disconnects the automatic control device from the rudder. The actuator has a small translucent oil tank, making it easy to check the liquid level. These actuators have only five moving parts. Compared with complex gears and lead screw actuators, the simplicity of machinery makes our products reliable and easy to maintain. These actuators are shipped from our factory and are completely filled with oil and do not require additional piping. With an average current of 4-6 amperes. The maximum current is 19 amperes and 12v. DC bore: 38mm. Variable flow rate: 600cc. 1.2L/min stroke: 305mm / 12". Recommended hardening time: 14-16 seconds. Maximum rudder torque: 1200Nm / 10,600lbin. Maximum thrust: 400Kg / 882lbs. Maximum ship length: 18m / 60'.

    Frequently Asked Questions (FAQ) About Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs

    Who is the Octopus Autopilot Drives?
    How to describe Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs?
    What is the type of the product?

    Who is the Octopus Autopilot Drives?

    Octopus is a division of Canada Metal (Pacific) Ltd. and has been Designing, Manufacturing and Marketing Autopilot Drives for over 20 years. CMT manufactures and markets the Octopus line of marine autopilot drive systems. The synergies of the product lines as well as the expertise of their Engineering and Machining divisions ensured that this acquisition would further strengthen our company's abilities to service the ever expanding needs of our customers.

    How to describe Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs?

    Linear actuator OCTAF1212LAM12. The octopus hydraulic linear actuator is a simple and effective method for driving the rudder on a ship equipped with a mechanical steering system. The linear actuator is a component of the octopus reversing pump and the marine hydraulic cylinder. The component is installed on the tiller or quadrant. When the autopilot is not used, the hydraulic cylinder runs freely with the rudder. When using automatic pilot, the solenoid valve on the actuator closes and locks the cylinder. The pilot's steering signal is now fed to the DC motor, which drives the pump to move the cylinder back and forth. After the power is cut off, the solenoid valve immediately disconnects the automatic control device from the rudder. The actuator has a small translucent oil tank, making it easy to check the liquid level. These actuators have only five moving parts. Compared with complex gears and lead screw actuators, the simplicity of machinery makes our products reliable and easy to maintain. These actuators are shipped from our factory and are completely filled with oil and do not require additional piping. With an average current of 4-6 amperes. The maximum current is 19 amperes and 12v. DC bore: 38mm. Variable flow rate: 600cc. 1.2L/min stroke: 305mm / 12". Recommended hardening time: 14-16 seconds. Maximum rudder torque: 1200Nm / 10,600lbin. Maximum thrust: 400Kg / 882lbs. Maximum ship length: 18m / 60'.
    • The Octopus reversing pump is a high-pressure, high-flow, fully submersible pump that can be installed in any position.
    • The Octopus hydraulic linear actuator is designed to drive the rudder on a boat equipped with mechanical steering system.
    • Simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.
    • The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder.
    • The linear actuator is activated by the reversing pump which pumps hydraulic fluid in sequence to each of the cylinder ports, causing the piston rod to extend or retract.

    What is the type of the product?

    Pumps/Drives
    • The Octopus reversing pump is a high-pressure, high-flow, fully submersible pump that can be installed in any position.
    • The Octopus hydraulic linear actuator is designed to drive the rudder on a boat equipped with mechanical steering system.
    • Simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.
    • The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder.
    • The linear actuator is activated by the reversing pump which pumps hydraulic fluid in sequence to each of the cylinder ports, causing the piston rod to extend or retract.
    • This is a linear drive pump which has been designed to be used with a 12vDC power supply.
    • It has a 12" stroke, an average current of 4-6 amps, and a max current of 19amps.
    • The cylinder bore size is 38mm and it has a variable flow rate of 600cc-1.2 litre/min
    • The hardover time for this pump can be between 14 and 16 seconds depending on the setting chosen
    • The AF1212LAM12 is a 12" bore linear drive pump with a 12vDC motor.
    • This pump has an average current of 4-6 amps and a max current of 19amps.
    • The cylinder bore is 38mm, the variable flow rate is 600cc-1.2 litre/min, and the stroke length is 305mm/12in.
    • The hardover time is 14-16 seconds, which means that it takes 14 to 16 seconds for the pump to return to its starting position after being turned


    Save $688 when you buy the Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs for only $2009 from NVN Marine! Same day free shipping before 3pm.
  • Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs Technical Specifications

    Type: 

    Marine Navigation & Instruments | Autopilots

    Vendor: 

    Octopus Autopilot Drives

    Weight: 

    22.2 lb

    Type: 

    Pumps/Drives

    User Guide: 

    Download PDF

    Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs User Reviews

    Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs Shipping & Return

    Shipping Weight: 

    22.2 lb

    Box Sizes: 

    8.00 (h) x 8.00 (w) x 39.00 (l)

    Cubic Feet: 

    2496.0

    Returnable: 

    Yes

    For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

    Octopus 12" Stroke Mounted 38mm Linear Drive 12V - Up To 60' or 33,000lbs

    $2,009.99 $2,698.86 ( / )