Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs

Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs Product Description

Octopus offer a full range of powerful, low current consumption hydraulic linear drives designed for long passage making. An independent comparison by the University of British Columbia* showed that Octopus piston pumps are three times more efficient than a gear pump and can be expected to halve the battery consumption when compared to a competitor’s unit, therefore doubling the effective range of the autopilot on one battery charge. A linear drive that does not have variable flow (unless dedicated to a range of yachts) will be operating either too quickly or too slowly in 90 Percent of cases. Autopilot manufacturers get around this problem by adjusting the output to the pump to compensate. However, this either forces the pump to operate for longer periods of time which increases power consumption and wear on the parts, or the pump will operate at high pressure for short periods of time – also putting unnecessary strain and wear on the system.

Octopus AF1012LAR7 Attributes

• Compatibility: Boats Up To 45 Feet Long
• Drive Type: Hydraulic Linear
• Stroke Length: 7 Inch
• Maximum Thrust: 882 Pound
• Input Voltage: 12 Volt
• Motor Current Rating: 19 Amp

Octopus AF1012LAR7 Features & Benefits

• Reliable: Only Three Moving Parts, Increasing Reliability
• Efficient- Three Times More Efficient, Half The Battery Consumption
• Adjustable Flow Rate: Configure Performance To Suit Your Vessel
• Octopus Linear Drives Are Available With A Large Range Of Stroke And Pump Sizes
• Limited 2 Year Warranty

Linear Actuators
OCTAF1012LAR7

An Octopus Hydraulic Linear Actuator is a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. This assembly is mounted on the rudder tiller-arm or quadrant. When the autopilot is not in use the cylinder runs freely along with the rudder. When the automatic pilot is in use a solenoid valve on the actuator closes and locks the cylinder. Steering signals from the pilot are now fed to the D.C. motor, which drives the pump to move the cylinder back and forth. De-energized, the solenoid valve immediately disconnects the automatic pilot from the rudder. The actuator has a small translucent oil reservoir, making it easy to check fluid levels. These actuators have only five moving parts. Mechanical simplicity gives our product reliability and ease of service when compared to complicated gear and screw actuators, making our units a favorite for offshore mariners. These actuators are shipped from our factory completely filled with oil and require no additional plumbing.

Features

Average Current 4-6 amps

Max Current 19amps

12vDC

Cylinder Bore: 38mm

Variable Flow Rate: 500cc - 1 litre/min

Stroke: 178mm/7in

Hardover Time(Suggested): 12-14 sec

Max Rudder Torque: 750Nm/6,630lbin

Peak Thrust: 400Kg/882lbs

Max boat Length: 14m/45'


The Octopus self-driving hydraulic linear actuator weighing 45 or 24,200 pounds is a simple and effective way to drive the rudder on a ship equipped with a mechanical steering system. The linear actuator is a component of the octopus reversing pump and the marine hydraulic cylinder. The component is installed on the tiller or quadrant.

Frequently Asked Questions (FAQ) About Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs

Who is the Octopus Autopilot Drives?
How to describe Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs?
What is the type of the product?
What is the compatibility of this product?

Who is the Octopus Autopilot Drives?

Octopus is a division of Canada Metal (Pacific) Ltd. and has been Designing, Manufacturing and Marketing Autopilot Drives for over 20 years. CMT manufactures and markets the Octopus line of marine autopilot drive systems. The synergies of the product lines as well as the expertise of their Engineering and Machining divisions ensured that this acquisition would further strengthen our company's abilities to service the ever expanding needs of our customers.

How to describe Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs?

The Octopus self-driving hydraulic linear actuator weighing 45 or 24,200 pounds is a simple and effective way to drive the rudder on a ship equipped with a mechanical steering system. The linear actuator is a component of the octopus reversing pump and the marine hydraulic cylinder. The component is installed on the tiller or quadrant.

• Linear Actuators are a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.
• The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder.
• This product is perfect for boats with mechanical steering systems that need to have the rudder moved in a straight line.

• Linear Actuators are used to drive the rudder on a boat equipped with mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. It is also called an Octopus hydraulic linear actuator.
• Linear Actuators are used to drive the rudder on a boat equipped with mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. It is also called an Octopus hydraulic linear actuator.
• The Linear Actuators OCT

What is the type of the product?

Pumps/Drives

• Linear Actuators are a simple, effective way to drive the rudder on a boat equipped with a mechanical steering system.
• The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder.
• This product is perfect for boats with mechanical steering systems that need to have the rudder moved in a straight line.
• Linear Actuators are used to drive the rudder on a boat equipped with mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. It is also called an Octopus hydraulic linear actuator.
• Linear Actuators are used to drive the rudder on a boat equipped with mechanical steering system. The linear actuator is an assembly of an Octopus reversing pump and a marine hydraulic cylinder. It is also called an Octopus hydraulic linear actuator.
• The Linear Actuators OCT
• Powerful and high-quality pump that provides a steady flow of water.
• Durable, long-lasting pump that can withstand the toughest conditions.
• Variable flow rate to suit your needs.
• Variable flow rate, with a max of 1.2 litre/min
• Stroke of 178mm/7in
• Hardover time of 12-14 sec

What is the compatibility of this product?

Boats Up To 45 Feet Long

Save $776 when you buy the Octopus 7" Stroke Remote 38mm Bore Linear Drive - 12V - Up To 45' or 24,200lbs for only $1619 from NVN Marine! Same day free shipping before 3pm.