MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100

SKU: 41854 - UPC: 873804003078 - MPN: NBE100-01
It will be shipped by UPS Ground.
$509.12 $595.00 ( / )

Available Stock : 2

  • This bus extender allows you to exceed a cumulative drop length of 78m
  • When using this extender, the NMEA interface provides more convenience
  • 50 nodes allow you to efficiently connect it with multiple networks
Maretron

Same Day

Shipping (3PM)

Free Returns

Within 30 days

MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100 PRODUCT DESCRIPTION

Network Bus Extender
Part #: NBE100-01

Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical issues caused by exceeding any of these limitations and makes design of large networks easier. NMEA 2000 networks have a maximum of 50 nodes allowed on a single network, a maximum network trunk length of 200m and a maximum cumulative drop length of 78m. If you have a network that exceeds any of these specifications, you can simply disconnect the network trunk in the middle and connect the ends to the NBE100, along with additional termination resistors. This will split the network into two electrical segments, each of which can have up to 50 nodes, for a total of 100 nodes on the logical network. The NBE100 will transparently route NMEA 2000 messages between the two network segments, making them work as a single logical NMEA 2000 network. Advanced priority-based message routing ensures that higher-priority messages are always prioritized over lower-priority messages, enabling predictable and reliable network operation.

Features:

  • Segments a single large NMEA 2000 network into two smaller electrical segments
  • Allows you to exceed the 50 node limitation on a NMEA 2000 network
  • Allows you to exceed the 200m trunk length limitation on a NMEA 2000 network
  • Allows you to exceed the 78m cumulative drop length limitation on a NMEA 2000 network
  • Allows all NMEA 2000 devices to operate as if they were still on a single NMEA 2000 network
  • Priority-based message routing ensures higher-priority messages get through the bus extender first
  • Optically isolates network segments, increasing signal integrity and network reliability

    "Warning"WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.



    Maretron's NBE100 (Network Bus Extender) allows you to expand the maximum number of nodes, network trunk length and cumulative tap length of any NMEA 2000 network. NBE¹ solves bus errors and other electrical problems caused by exceeding any of these limits, and makes the design of large networks easier. The NMEA⁰⁰⁰ network allows up to ⁵⁰ nodes on a single network, the maximum network trunk length is ⁰⁰m, and the maximum cumulative discard length is ⁷⁸m. If your network exceeds any of these specifications, you can simply disconnect the network trunk in the middle and connect both ends with additional terminating resistors to NBE¹. This will divide the network into two electrical parts, each of which can contain up to 1/3 nodes, and a total of ¹ nodes on the logical network. NBE⁰⁰ will transparently route NMEA messages between two network segments, making them a single logical NMEA network. Message routing based on high priority ensures that high priority messages are always given priority over low priority messages, thereby achieving predictable and reliable network operation.

    Maretron's NBE100 (Network Bus Extender) allows you to expand the maximum number of nodes, network trunk length and cumulative tap length of any NMEA 2000 network. NBE¹ solves bus errors and other electrical problems caused by exceeding any of these limits, and makes the design of large networks easier. The NMEA⁰⁰⁰ network allows up to ⁵⁰ nodes on a single network, the maximum network trunk length is ⁰⁰m, and the maximum cumulative discard length is ⁷⁸m. If your network exceeds any of these specifications, you only need to disconnect the middle network trunk and connect both ends to NBE¹ through additional termination resistors. This will divide the network into two electrical parts. Each electrical part can contain up to 1/3 nodes, and the logical network can contain a total of ¹ nodes. NBE⁰⁰ will transparently route NMEA messages between the two network segments, making them a logical NMEA network. Message routing based on high priority ensures that high priority messages are always given priority over low priority messages, thereby achieving predictable and reliable network operations.

    Maretron NMEA 2000 Network Bus Extender Related Products

    MARETRON MICRO TEE MALE (LEFT) FEMALE (BOTTOM) FEMALE (RIGHT)
    MARETRON MICRO DOUBLE - ENDED CORDSET 0.5 METER
    MARETRON MICRO DOUBLE - ENDED CORDSET 1 METER
    MARETRON MICRO DOUBLE - ENDED CORDSET 3 METER
    MARETRON MICRO DOUBLE - ENDED CORDSET 6 METER
    MARETRON MICRO DOUBLE ENDED - CORDSET 2 METER
    MARETRON MICRO DOUBLE ENDED CORDSET 4 METER
    MARETRON MICRO DOUBLE ENDED CORDSET 5 METER


    Save $85 when you buy the MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100 for only $509 from NVN Marine! Same day shipping before 3pm.

MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100 TECHNICAL SPECIFICATIONS

Type: 

Marine Navigation & Instruments -> NMEA Cables & Sensors

Vendor: 

Maretron

Weight: 

0.7 lb

Data Interface: 

NMEA 2000

Product Manual: 

Download PDF

MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100 USER REVIEWS

MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100 SHIPPING & RETURN

Shipping Weight: 

0.7 lb

Box Sizes: 

1.00 (h) x 4.00 (w) x 6.00 (l)

Cubic Feet: 

24.0

Returnable: 

Yes

USPS First Class: 

Yes

P65: 

Yes

For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

MARETRON NMEA 2000 NETWORK BUS EXTENDER NBE100

$509.12 $595.00 ( / )