Jabsco 3" Flangemount Blower - 105 CFM - 24v
SKU: 34525 - UPC: 671880029377 - MPN: 34739-0020
$187.19
$284.99
( / )
- Rugged plastic housing
- Install on any flat surface
- Slide-in intake pipe connection
- Efficient large air volume
- Always use corrosion-resistant materials
Jabsco 3" Flangemount Blower - 105 CFM - 24v Product Description
DC 150 CFM Flangemount 3" BlowersFeatures:
- Tough Reinforced Plastic Housing
- Mount to any surface
- Slip-On Inlet and Outlet Ducting Connection
- Efficient High Volume Air Flow
- Low Current Draw
- Corrosion-Resistant Materials Throughout
- N.M.M.A. Type Accepted
- DC Models comply with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
- DC Models comply with Complies with ISO 9097 MARINE
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
The JABSCO flange-mounted plastic blower adopts a radial design, which can provide high output even in complex installations with a long duct length and/or multiple elbows in the duct. The air duct fan always has corrosion-resistant materials, low current consumption and slide-in inlet pipe connection. The blower should not be installed where the direct heat source exceeds 130F. Designed for non-continuous applications, such as emergency backup ventilation portable equipment, ships, automobiles or recreational vehicles. SP 150, full load current 3.30, RPM 2500, maximum inlet temperature 130 degrees F, inlet diameter. 3 inches, total height 7-5/8 inches, total width 6-3/4 inches, and total depth 7-7/8 inches.
Frequently Asked Questions (FAQ) About Jabsco 3" Flangemount Blower - 105 CFM - 24v
Who is the Jabsco?How to describe Jabsco 3" Flangemount Blower - 105 CFM - 24v?
What is the working voltage of the product?
What is the ducting of the product?
Who is the Jabsco?
Jabsco is a worldwide leading manufacturer of products for the leisure marine market, including water systems, engine cooling pumps, searchlights and marine waste systems. Anywhere a pump is needed aboard a pleasure-boat or small work-boat, for engine cooling, bilge pumping, fresh or waste water handling, Jabsco world wide will supply a top-quality product.
How to describe Jabsco 3" Flangemount Blower - 105 CFM - 24v?
The JABSCO flange-mounted plastic blower adopts a radial design, which can provide high output even in complex installations with a long duct length and/or multiple elbows in the duct. The air duct fan always has corrosion-resistant materials, low current consumption and slide-in inlet pipe connection. The blower should not be installed where the direct heat source exceeds 130F. Designed for non-continuous applications, such as emergency backup ventilation portable equipment, ships, automobiles or recreational vehicles. SP 150, full load current 3.30, RPM 2500, maximum inlet temperature 130 degrees F, inlet diameter. 3 inches, total height 7-5/8 inches, total width 6-3/4 inches, and total depth 7-7/8 inches.
What is the working voltage of the product?
24v
What is the ducting of the product?
3"
Save $97 when you buy the Jabsco 3" Flangemount Blower - 105 CFM - 24v for only $187 from NVN Marine! Same day shipping before 3pm.
Jabsco 3" Flangemount Blower - 105 CFM - 24v Technical Specifications
Type: | |
---|---|
Vendor: |
Jabsco |
Weight: |
4.2 lb |
Ducting: |
3" |
Open Flow (CFM): |
150 CFM |
Volts: |
24v |
Product Manual: |
Jabsco 3" Flangemount Blower - 105 CFM - 24v User Reviews
Jabsco 3" Flangemount Blower - 105 CFM - 24v Shipping & Return
Shipping Weight: |
4.2 lb |
---|---|
Box Sizes: |
6.00 (h) x 8.00 (w) x 9.00 (l) |
Cubic Feet: |
432.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.