Maretron Direct Current DC Monitor

SKU: 33344 - UPC: 873804000183 - MPN: DCM100-01
$406.79 $495.00 ( / )

Available Stock : 26

  • battery voltage
  • Battery current
  • Ripple voltage
  • Battery box temperature
  • charging
Maretron
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Maretron Direct Current DC Monitor Product Description

Maretron's DCM100 DC Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load.

Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit.

When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery Temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don't have to break connections or install connectors as you do with inline shunts used by other solutions.

Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron's N2KView vessel monitoring and control system. Battery Voltage Battery Current Ripple Voltage Battery Case Temperature State of Charge Time Remaining Charge Efficiency Factor.

* DCM100 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure)



Maretron DCM10001 Attributes


Maretron's DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panelts, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, changing current, and terminal voltage to precisely compute battery state of charge, state of health, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire - you don't have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron's N2KView vessel monitoring and control system.
  • Battery Voltage
  • Battery Current
  • Ripple Voltage
  • Battery Case Temperature
  • State of Charge
  • Time Remaining
  • Charge Efficiency Factor

    Dcm100-nmea 2000 DC monitor maretron's dcm100 DC monitor is an advanced electronic monitoring device used to measure the voltage and current of any DC power supply or load. Examples of DC power sources that can be monitored using dcm100 include batteries, alternators, solar panels, and wind turbines. dcm100 can also be used to monitor DC loads, such as inverters, windlasses, DC chillers or any DC branch circuit. When using dcm100 to monitor the battery, complex circuits and software algorithms will monitor the battery temperature, load current, charging current and terminal voltage to accurately calculate the battery's charging status, health status and remaining time. To measure current, dcm100 uses the most advanced Hall-effect current sensor that comes with it. The sensor only needs to slide on the wire without disconnecting or installing connectors such as series shunts used in other solutions. . Most importantly, dcm100 has passed nmea 2000 certification, so you can use a compatible nmea 2000 monitor to view all DC information anywhere on the container. dcm100 is a key component of maretron's n2kview container monitoring system.

    Includes:


    • Two (2) FC01 cables.
    • One (1) LEMHTA200-S 200 amp Current Transducer.
    • One (1) TR3K Ring/Under Bolt Temperature Probe.

    Transmits:


    • Battery Voltage
    • Battery Current
    • Ripple Voltage
    • Battery Case Temperature
    • State of Charge
    • Time Remaining
    • Charge Efficiency Factor


    Electrical:


    • Battery Sense Voltage Range: 0 to 50 VDC 
    • Battery Sense Voltage Accuracy: ±100 mV B
    • Battery Current Range: 0 to 200A (With included Hall-effect current sensor) 
    • Battery Current Accuracy: ±1% (With included Hall-effect current sensor)
    • Operating Voltage: 9 to 16 Volts Battery Interface (NMEA Interface 9 to 32 Volts) 
    • Power Consumption (Battery Interface): 70mA 
    • Power Consumption (NMEA 2000 Connection): 50mA 
    • Load Equivalence Number: (LEN) 1 (NMEA 2000 Spec. [1 LEN = 50mA]) 
    • Reverse Battery Protection: Yes (Indefinitely) 
    • Load Dump Protection Yes (Energy Rated Per SAE J1113)


    Maretron Micro Tee
    Maretron Micro Double-Ended Cordset - 0.5M
    Maretron Micro Double-Ended Cordset - 1 Meter
    Maretron Micro Double-Ended Cordset - 3M
    Maretron Micro Double-Ended Cordset - 6 Meter
    Maretron Battery Harness w/Fuse f/DCM100
    Maretron Current Transducer w/Cable f/DCM100 - 200 Amp
    Maretron Micro Double-Ended Cordset - 2 Meter
    Maretron Micro Double-Ended Cordset - 4 Meter
    Maretron Micro Double-Ended Cordset 5 Meter


    Frequently Asked Questions (FAQ) About Maretron Direct Current DC Monitor

    Who is the Maretron?
    How to describe Maretron Direct Current DC Monitor?
    What is the exterior color of product?
    In which country this product made in?
    What's the Maretron Direct Current DC Monitor package dimensions and weight?
    What is the connector type of the product?
    What is the communication method of the product?
    What is the manufacturer notes about Maretron Direct Current DC Monitor?

    Who is the Maretron?

    Maretron's products, from GPS receivers to transducers, are engineered to withstand the harshest marine conditions. Maretron carefully protects all of our electronics, even below-deck equipment, in watertight housings to ensure years of reliable performance. Superior engineering, maximum accuracy, consistent reliability: three reasons why Maretron's products are among the best worldwide.

    How to describe Maretron Direct Current DC Monitor?

    Maretron's DCM100 DC Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load.

    Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit.

    When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery Temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don't have to break connections or install connectors as you do with inline shunts used by other solutions.

    Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron's N2KView vessel monitoring and control system. Battery Voltage Battery Current Ripple Voltage Battery Case Temperature State of Charge Time Remaining Charge Efficiency Factor.

    * DCM100 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure)

    What is the exterior color of product?

    Black

    In which country this product made in?

    USA

    What's the Maretron Direct Current DC Monitor package dimensions and weight?

    7 (w) X 4.5 (h) X 9.5 (l) inches and the weight is: 2.61 lb.

    What is the connector type of the product?

    NMEA2000 Micro

    What is the communication method of the product?

    NMEA 2000

    What is the manufacturer notes about Maretron Direct Current DC Monitor?

    Maretron's DCM100 DC Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load.

    Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit.

    When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery Temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining. To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don't have to break connections or install connectors as you do with inline shunts used by other solutions.

    Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display. The DCM100 is a key component of Maretron's N2KView vessel monitoring and control system. Battery Voltage Battery Current Ripple Voltage Battery Case Temperature State of Charge Time Remaining Charge Efficiency Factor.

    * DCM100 requires configuration. (Maretron DSM250, DSM410, USB100, or IPG100 needed to configure)



    Save $88 when you buy the Maretron Direct Current DC Monitor for only $406 from NVN Marine! Same day shipping before 3pm.
  • Maretron Direct Current DC Monitor Technical Specifications

    Type: 

    Marine Navigation & Instruments | NMEA Cables & Sensors

    Vendor: 

    Maretron

    Weight: 

    2.6 lb

    Product Manual: 

    Download PDF

    Maretron Direct Current DC Monitor User Reviews

    Maretron Direct Current DC Monitor Shipping & Return

    Shipping Weight: 

    2.6 lb

    Box Sizes: 

    5.00 (h) x 7.00 (w) x 10.00 (l)

    Cubic Feet: 

    350.0

    Returnable: 

    Yes

    P65: 

    Yes

    For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

    Maretron Direct Current DC Monitor

    $406.79 $495.00 ( / )