Raymarine 3.5" Pedestal Socket f/Tiller Pilots
Shipping (3PM)
Within 30 days
Raymarine 3.5" Pedestal Socket f/Tiller Pilots Product Description
Enhance your sailing experience with the Raymarine 3.5-inch pedestal socket, a precision-engineered accessory designed specifically for tiller pilots. This compact mount addresses a common challenge on smaller sailboats and dinghies where the tiller arm sits higher than the fixed end of your autopilot unit. By elevating the pedestal, it enables a perfectly horizontal alignment, ensuring smooth, reliable steering without strain on the system or excessive wear on components.
Sailors know the frustration of mismatched mounting heights leading to suboptimal performance or potential damage. This pedestal socket solves that by providing a sturdy 3.5-inch lift, compatible with Raymarine tiller pilots used in autopilot setups. Crafted from durable marine-grade materials, it withstands saltwater exposure, UV rays, and the constant motion of offshore adventures.
Why Sailors Trust This Pedestal Socket for Tiller Pilots
- Optimal Alignment for Peak Performance: Raises the fixed end to match tiller height, promoting even load distribution and preventing binding or slippage during maneuvers.
- Battle-Tested Durability: Engineered for harsh marine conditions, from coastal cruising to bluewater passages, with corrosion-resistant construction that outlasts ordinary mounts.
- Seamless Integration: Works hand-in-hand with Raymarine autopilot systems, maintaining the brand's reputation for intuitive operation and rock-solid reliability.
- Effortless Setup: Simple bolt-on design means you spend less time in the cockpit tinkering and more time enjoying the wind—most installations take under 30 minutes with basic tools.
- Compact and Low-Profile: At just 3.5 inches tall, it adds minimal weight and windage, preserving your boat's balance and responsiveness.
Quick and Easy Installation Tips
Installing this pedestal socket is straightforward, even for solo sailors. Position it on your cockpit sole or nearby deck surface where the tiller pilot's fixed bracket will mount. Secure it firmly using the provided hardware to a solid substrate—think reinforced fiberglass or a dedicated backing plate for longevity.
Key steps include:
- Measure the height difference between your tiller arm and pilot base to confirm fit.
- Clean the mounting surface thoroughly to ensure a watertight seal.
- Apply marine sealant around bolt holes to fend off moisture ingress.
- Attach your tiller pilot's base to the socket, then test the full range of motion before heading out.
Pro tip: Pair it with Raymarine's tiller drive units for autopilot systems like those on popular trailerable sailboats. Regular checks on fasteners keep everything performing flawlessly season after season.
Perfect Fit for Raymarine Tiller Autopilots
This socket shines with Raymarine tiller pilots on boats up to 35 feet, ideal for daysailers, racers, and weekend cruisers. It's tailored for setups where the cockpit layout demands a height adjustment to keep the pushrod parallel to the deck. Whether upgrading an older ST series or integrating with modern Evolution autopilots, it ensures your steering gear operates at full efficiency.
Common applications include Beneteau First 27s, J/24s, or any tiller-steered vessel where space is at a premium. It complements transducers, compasses, and control heads without interference, creating a cohesive helm station.
Long-Term Care for Uninterrupted Voyages
To maximize lifespan, rinse the socket with fresh water after every sail to remove salt buildup. Inspect for hairline cracks or loose fittings annually, especially if racing in choppy conditions. A light coat of marine grease on moving parts prevents corrosion and ensures silky-smooth operation.
Sailors report this mount holding strong through years of heavy use, often outlasting the tiller pilot itself when properly maintained. It's a small investment that pays dividends in reliability and peace of mind on the water.
Frequently Asked Questions
What boats is the Raymarine 3.5-inch pedestal socket best suited for?
It's ideal for tiller-steered sailboats like daysailers, racers, and cruisers up to 35 feet where the tiller arm is higher than the autopilot's fixed mount point.
Does this socket work with all Raymarine tiller pilots?
Yes, it's designed for compatibility with Raymarine tiller autopilot systems, ensuring a secure fit for horizontal mounting adjustments.
How much height does the pedestal socket add?
It provides a precise 3.5-inch elevation, perfect for aligning the tiller pilot parallel to the deck surface.
Is installation DIY-friendly for average sailors?
Absolutely—basic tools and 30 minutes or less get it mounted securely, with no special skills required.
Can it handle rough offshore conditions?
Yes, built with rugged, corrosion-resistant materials proven in extreme marine environments for long-lasting performance.
How do I maintain the pedestal socket?
Rinse with fresh water post-sail, inspect fasteners regularly, and apply marine grease to joints for optimal durability.
For more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.
Raymarine D030 Attributes
- Compatibility: Raymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot
- Height: 3-1/2 Inch
Raymarine D030 Features & Benefits
- High-Performance Products Proven In The Harshest Of Environments
- Built To Last Longer Life
- Rugged Design And Reliability
- Easy To Install
- Limited 2 Year Warranty
Raymarine D030 Warranties
3.5" Pedestal Socket For Tiller Pilots
Allows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.
Features: The base socket of the 3.5" joystick guide allows the joystick guide to be installed horizontally when the fixed end of the guide is lower than the joystick arm.
Frequently Asked Questions (FAQ) About Raymarine 3.5" Pedestal Socket f/Tiller Pilots
Who is the Raymarine?How to describe Raymarine 3.5" Pedestal Socket f/Tiller Pilots?
What is the height of the product?
What is the compatibility of this product?
Who is the Raymarine?
How to describe Raymarine 3.5" Pedestal Socket f/Tiller Pilots?
What is the height of the product?
What is the compatibility of this product?
Save $12 when you buy the Raymarine 3.5" Pedestal Socket f/Tiller Pilots for only $92 from NVN Marine! Same day shipping before 3pm.
Raymarine 3.5" Pedestal Socket f/Tiller Pilots Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Raymarine |
| Weight: |
1.0 lb |
Raymarine 3.5" Pedestal Socket f/Tiller Pilots User Reviews
Raymarine 3.5" Pedestal Socket f/Tiller Pilots Shipping & Return
| Shipping Weight: |
1.0 lb |
|---|---|
| Box Sizes: |
1.00 (h) x 4.00 (w) x 5.00 (l) |
| Cubic Feet: |
20.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.