Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC
SKU: 32562 - UPC: 632085076207 - MPN: 7620
It will be shipped by UPS Ground.
It will be shipped by UPS Ground.
$181.89
$313.83
( / )
- Allows parallel connection of battery packs for emergency start
- Dual inductive charging on two battery packs
- Includes ML series remote control Contura switch
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC Product Description
500 Ampere Magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting engine.
Blue Sea 7620BSS Attributes
- Operating Voltage: 12 Volt
- Ampere Rating: 120 Amp Continuous/ 210 Amp Intermittent
Blue Sea 7620BSS Features & Benefits
- Automatically Manages The Charging Of Two Large Battery Banks
- Allows Paralleling Of Battery Banks For Emergency Starting
- 500 Ampere Continuous Rating To Support High-Output Alternators
- Magnetic Latch (ML) - ACR Draws Very Low Current In The "ON" Or "OFF" States, And Draws Moderate Current For Very Short Time When Changing State
- Dual Sensing- Senses Charge On Both Battery Banks
- Start Isolation (SI)- Can Be Configured For Temporary Isolation Of House Loads From Engine Circuit During Engine Cranking To Protect Sensitive Electronics
- Engine Isolation (EI)- Can Be Configured For Isolation Of Two Engines While Both Are Running To Protect Engine Electronics And Maximize Alternator Output Senses Charging On Two Battery Banks
- LED Output To Remotely Indicate When Batteries Are Combined, Isolated, In Voltage Lockout, Or In Start Or Engine Isolation
- Tin-Plated Copper Studs For Maximum Conductivity And Corrosion Resistance/Silver Alloy Contacts Provide High Reliability For Switching Live Load
- No Supplier Warranty
Blue Sea 7620BSS Installation Instructions
7620
Manual Control: No
Coil Voltage: 12V DC
- Combines battery banks during charging and isolates under discharge
- 500 Ampere continuous rating suitable for use with large battery banks, starters, alternators, and inverter/chargers
- Includes ML-Series Remote Control Contura Switch PN 2146
- Silver alloy contacts provide high reliability
- 3/8" copper studs, using Blue Sea Systems superior one piece stud technology, suitable for 300 Ampere continuous rating and large cable connections
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Blue Sea Systems ML series automatic charging relay provides a 500A magnetic latching (bistable) relay, which automatically assembles the battery when charging, and isolates the battery when discharging and starting the engine. Magnetic latch (ML) relays consume very low current in the on-state. Start isolation (SI) can be configured to temporarily isolate the house load from the engine circuit during engine startup to protect sensitive electronic equipment. Engine isolation (EI) can be configured to isolate when two engines are running simultaneously to protect engine electronics and maximize the output of the alternator. The manual override control knob provides higher security, allows control in the case of power-on or power-off, and provides a lock function during maintenance. The LED output can remotely indicate the switch status-an optional LED or a remote control Contura switch with integrated LED is required. 3/8" -16 tinned copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length can accommodate multiple cable terminals. One-piece stainless steel flange nuts ensure a safe and reliable connection. The label notch is used for circuit identification. Silver alloy contacts provide high reliability for live switches.
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC Related Products
Blue Sea 2146 ML-Series Remote Control Contura Switch - ON-OFF-ONAncor Red 1 AWG Battery Cable - Sold By The Foot
Ancor Red 1/0 AWG Battery Cable - Sold By The Foot
Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
Ancor Heavy Duty Lugs - 1 Gauge Wire - 3/8" Post - 2-Pack
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 3/8" Post - 2-Pack
Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 3/8" Post - 2-Pack
Ancor Red 3/0 AWG Battery Cable - Sold By The Foot
Ancor Red 4/0 AWG Battery Cable - Sold By The Foot
Ancor Heavy Duty Lugs - 3/0 Gauge Wire - 3/8" Post - 2-Pack
Frequently Asked Questions (FAQ) About Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC
Who is the Blue Sea Systems?How to describe Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
What is the warranty policy for Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
What is the working voltage of the product?
What is the type of the product?
What's the color of Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
What is the product amperage?
What is the dimensions of the product?
What is the warranty policy of the product?
Who is the Blue Sea Systems?
Blue Sea Systems is committed to the improvement of marine electrical products and systems, such as panel systems, circuit breakers, connectors, and insulators. Blue Sea wants to satisfy their distributors, dealers and ultimately the retail customer by designing and manufacturing electrical products engineered to withstand the harsh marine environment.
How to describe Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
Blue Sea Systems ML series automatic charging relay provides a 500A magnetic latching (bistable) relay, which automatically assembles the battery when charging, and isolates the battery when discharging and starting the engine. Magnetic latch (ML) relays consume very low current in the on-state. Start isolation (SI) can be configured to temporarily isolate the house load from the engine circuit during engine startup to protect sensitive electronic equipment. Engine isolation (EI) can be configured to isolate when two engines are running simultaneously to protect engine electronics and maximize the output of the alternator. The manual override control knob provides higher security, allows control in the case of power-on or power-off, and provides a lock function during maintenance. The LED output can remotely indicate the switch status-an optional LED or a remote control Contura switch with integrated LED is required. 3/8" -16 tinned copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length can accommodate multiple cable terminals. One-piece stainless steel flange nuts ensure a safe and reliable connection. The label notch is used for circuit identification. Silver alloy contacts provide high reliability for live switches.
What is the warranty policy for Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
Lifetime
- Magnetic Latch (ML)—ACR draws very low current (<40mA to monitor terminal voltage) in the “ON” or “OFF” states, and draws moderate current for very short time when changing state
- Allows two battery banks to be efficiently charged from a single charging source without external regulators or isolators
- Nominal voltage: 12V
- Engine Isolation: Yes
- Amperage Operating Current: 13mA
- Amperage Operating Current when changing state: <7.0A
- Live Current Switching: 300A @ 12V DC
- Continuous Rating: 500A
- Intermittent Rating: 700A
- Cable Size to Meet Rating: 4/0AWG
- Terminal Stud Size: 3/8"
- Weight: 2.04 lbs.
- Dual sensing; senses charge in each battery bank
- Approvals: Meets ISO 8846 and SAE J1171 external ignition protection requirements, CE marked, Rated IP66
- Combine 30 sec: 13.5V
- Combine 90 sec: 13.0V
- Open 10 sec: 12.35V
- Open 30 sec: 12.75V
- Open High: 16.2V
- Start Isolation or Engine Isolation allow uses to select bank to be isolated during current spikes to protect sensitive electronics or engine control systems
- Ignition protected; can be installed in engine rooms of gasoline powered boats
- Operated using remote switch; eliminates long heavy gauge cable runs
- Remote switch (included) provides emergency combine feature to start the engine or make a radio call
- LED indicators on switch designate mode of operation
- Can be easily connected to ML series battery switches using link bus plates
- Lifetime warranty
What is the working voltage of the product?
12 Volts/24 Volts DC
What is the type of the product?
Charger
What's the color of Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC?
Black
What is the product amperage?
500 Amps
What is the dimensions of the product?
2 7/8" Length x 2 7/8" Width x 3" Height
What is the warranty policy of the product?
Lifetime warranty
Save $131 when you buy the Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC for only $181 from NVN Marine! Same day shipping before 3pm.
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC Videos
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC Technical Specifications
Type: | |
---|---|
Vendor: |
Blue Sea Systems |
Weight: |
1.95 lb |
Product Manual: | |
Product Brochure: |
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC User Reviews
Blue Sea 7620 ML-Series Automatic Charging Relay (Magnetic Latch) 12VDC Shipping & Return
Shipping Weight: |
1.95 lb |
---|---|
Box Sizes: |
3.00 (h) x 7.00 (w) x 12.00 (l) |
Cubic Feet: |
252.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.