Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch
Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch Product Description
Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. Four blade props accelerate faster, exhibit stern lift, handle rough or following seas better, and maintain speed better as you load the boat down with gear or people. Three blade props run better on pontoons, while four blades and three blades both run well on tri-toons (recent testing has shown that pontoons and tri-toons run better with larger blade diameters than runabout or bass boat hulls).
Squeeze Cast for Added Strength
Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.
Long Lasting Ultracoat™ Powder Coated Finish
Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.
Large Free Flowing Exhaust Ports
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.
Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm, and CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
For the selection of the hub kit, please refer to the "Turning Point Selection Table" or "Support Guide". Combines the latest and most efficient design features of high-performance stainless steel...
Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch Related Products
Davis Prop SoxAttwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts
Corrosion Block High Performance Waterproof Grease - 2oz Tube - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - (2) 3oz Cartridges - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14oz Cartridge - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable & Non-Toxic
Forespar Lanocote Rust & Corrosion Solution Prop and Bottom - 16 oz.
Sea-Dog Galvanized Prop Wrench Fits 1-1/16" Prop Nut
T-H Marine Prop Master Prop Stop Propeller Stop
Frequently Asked Questions (FAQ) About Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch
Who is the Turning Point Propellers?How to describe Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch?
What is the type of the product?
Rotation side of the product?
What is the material of Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch?
What is the best use of the product?
What is the diameter (inches) of the product?
What is the diameter of the product?
What is the compatibility of this product?
What is the pitch of the product?
How many blades have this product?
Who is the Turning Point Propellers?
How to describe Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch?
What is the type of the product?
Rotation side of the product?
What is the material of Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch?
What is the best use of the product?
What is the diameter (inches) of the product?
What is the diameter of the product?
What is the compatibility of this product?
What is the pitch of the product?
How many blades have this product?
Save $75 when you buy the Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch for only $86 from NVN Marine! Same day shipping before 3pm.
Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch Technical Specifications
Type: | |
---|---|
Vendor: |
Turning Point Propellers |
Weight: |
6.95 lb |
Diameter (Inches): |
14-1/4" |
Material: |
Aluminum |
Pitch: |
17 |
Rotation: |
Right |
User Guide: | |
Product Brochure: |
Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch User Reviews
Turning Point Hustler® - Right Hand - Aluminum Propeller - LE-1417- 3-Blade - 14.25" x 17 Pitch Shipping & Return
Shipping Weight: |
6.95 lb |
---|---|
Box Sizes: |
7.00 (h) x 15.00 (w) x 16.00 (l) |
Cubic Feet: |
1680.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.