Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch

SKU: 31721 - UPC: 652480100741 - MPN: 21301310
$63.99 $117.00 ( / )

Available Stock : 60

Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast...
Turning Point Propellers
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch Product Description

Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch

Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.

The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.

Squeeze Cast for Added Strength

Stainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.

Long Lasting Ultracoat™ Powder Coated Finish

Exclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.

Large Free Flowing Exhaust Ports

Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.

Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.

Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  

"Warning"WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm, and CARBON BLACK which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.



The turning propeller H1-1013 is suitable for the 3.5-inch gearbox 3-blade aluminum propeller of the 6 HP-74 HP engine. The gearbox is a right-handed propeller with a diameter of 10.5 inches, and the propeller is 13.5...

Davis Prop Sox
Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts
Corrosion Block High Performance Waterproof Grease - 2oz Tube - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - (2) 3oz Cartridges - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - 14oz Cartridge - Non-Hazmat, Non-Flammable & Non-Toxic
Corrosion Block High Performance Waterproof Grease - 16oz Tub - Non-Hazmat, Non-Flammable & Non-Toxic
Forespar Lanocote Rust & Corrosion Solution Prop and Bottom - 16 oz.
Sea-Dog Galvanized Prop Wrench Fits 1-1/16" Prop Nut
T-H Marine Prop Master Prop Stop Propeller Stop


Frequently Asked Questions (FAQ) About Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch

Who is the Turning Point Propellers?
How to describe Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch?
Rotation side of the product?
What is the material of Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch?
What is the diameter (inches) of the product?
What is the pitch of the product?

Who is the Turning Point Propellers?

Turning Point Propellers manufactures high performance aluminum and stainless steel propellers. Turning Point was the first to introduce the interchangeable hub system to the market. This MasterGuard Hub System helps protect engines, drives from shift shock, impact shock, and harsh vibrations. It is also the most durable hub system available.

How to describe Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch?

The turning propeller H1-1013 is suitable for the 3.5-inch gearbox 3-blade aluminum propeller of the 6 HP-74 HP engine. The gearbox is a right-handed propeller with a diameter of 10.5 inches, and the propeller is 13.5...

Rotation side of the product?

Right

What is the material of Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch?

Aluminum

What is the diameter (inches) of the product?

10-1/2"

What is the pitch of the product?

13


Save $53 when you buy the Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch for only $63 from NVN Marine! Same day shipping before 3pm.

Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch Technical Specifications

Type: 

Boat Outfitting | Propeller

Vendor: 

Turning Point Propellers

Weight: 

3.95 lb

Diameter (Inches): 

10-1/2"

Material: 

Aluminum

Pitch: 

13"

Rotation: 

Right

User Guide: 

Download PDF

Product Brochure: 

Download PDF

Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch User Reviews

Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch Shipping & Return

Shipping Weight: 

3.95 lb

Box Sizes: 

6.00 (h) x 13.00 (w) x 13.00 (l)

Cubic Feet: 

1014.0

Returnable: 

Yes

P65: 

Yes

For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

Turning Point Hustler® - Right Hand - Aluminum Propeller - H1-1013 - 3-Blade - 10.5" x 13 Pitch

$63.99 $117.00 ( / )