Jabsco Sealed Macerator Self-Priming Pump 12V
SKU: 31418 - UPC: 671880564373 - MPN: 18590-2092
$190.99
$287.99
( / )
Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry ProtectionWaste EvacuationThe Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than...
Jabsco Sealed Macerator Self-Priming Pump 12V Product Description
Sealed MaceratorSelf-Priming Macerator Pump with Run-Dry Protection
Waste Evacuation
The Jabsco 18590 series DC macerator pump unit is the ideal solution for emptying marine holding tanks when not in a discharge restricted area. Self priming to 5ft this pump will empty a typical 30 gallon (115 Liter) holding tank in less than 3 minutes. Duty cycle of the pump is 15 minutes continuous which means a 180 gallon (680 liter) can be emptied in a single operation
It is recommended that holding tanks be flushed with several gallons of water after each pump out. This will reduce the possibility of a continued build up of sediment in the tank which could cause a potential blockage.
Fish Box and Livewell Tank Evacuation
The Jabsco Macerator Pump is the ideal pump for the emptying of Fish box and livewell receptacles. Very often the livewell tank will be above the waterline of the boat, when this is the case gravity can be used to empty the livewell tank. If not installed in this format then it is beneficial to use the Jabsco macerator pump for evacuation due to its self-priming capabilities and also it's grinding properties.
Fish boxes are typically mounted into the floor of the vessel and are very often below the waterline or only partially above the waterline. Again the Jabsco Macerator pump has the characteristics that lend themselves to this application. The bait residue particles of ice, fish scales and anything else that could potentially be found in the Fish-Box will be easily passed buy the Jabsco Macerator Pump, and the self priming capabilities are perfect for fish box installations common to many of today's sports fishing boats.
Features:
- Impeller: Jabsco Nitrile compound
- Macerator: Stainless Steel Cutter reduces particle size to 1/8" maximum. New 4 blade design
- Seal: Lip Type
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
The Jabsco 18590-2092 heavy-duty 12V grinder pump helps to keep the water tank on the ship empty for sanitation. It has an idling protection function to prevent...
Jabsco Sealed Macerator Self-Priming Pump 12V Related Products
Jabsco Service Kit f/18590 Series Macerator PumpsFrequently Asked Questions (FAQ) About Jabsco Sealed Macerator Self-Priming Pump 12V
Who is the Jabsco?How to describe Jabsco Sealed Macerator Self-Priming Pump 12V?
What is the warranty policy for Jabsco Sealed Macerator Self-Priming Pump 12V?
What is the working voltage of the product?
What is the working voltage of the product?
What is the type of the product?
What is the material of Jabsco Sealed Macerator Self-Priming Pump 12V?
What is the product amperage?
What is the outlet size of the product?
What is the capacity of product?
What is the dimensions of the product?
What is the diameter of the product?
What is the inlet size of the product?
Who is the Jabsco?
Jabsco is a worldwide leading manufacturer of products for the leisure marine market, including water systems, engine cooling pumps, searchlights and marine waste systems. Anywhere a pump is needed aboard a pleasure-boat or small work-boat, for engine cooling, bilge pumping, fresh or waste water handling, Jabsco world wide will supply a top-quality product.
How to describe Jabsco Sealed Macerator Self-Priming Pump 12V?
The Jabsco 18590-2092 heavy-duty 12V grinder pump helps to keep the water tank on the ship empty for sanitation. It has an idling protection function to prevent...
What is the warranty policy for Jabsco Sealed Macerator Self-Priming Pump 12V?
One Year Limited
- Heavy duty self-priming macerator pump
- Triple sealed motor for long service life
- 4 blade chopper reduces risk of clogging
- Powder coated housing to resist corrosion (internally and externally)
- Run-dry protection shuts down pump no fluids are detected
- Capable of self-priming up to 5'
- Ideal for holding tanks, fish boxes, and livewell tanks
- 15 minute run cycle can empty 180 gallons in a single cycle
- Complies with USCG Reg. 183.410 and ISO 8846 Marine for ignition protection
What is the working voltage of the product?
12 Volts DC
What is the working voltage of the product?
12v
What is the type of the product?
Waste Pumps
What is the material of Jabsco Sealed Macerator Self-Priming Pump 12V?
Nylon Body
What is the product amperage?
16 Amps at 12 Volts
What is the outlet size of the product?
1-1/2"
What is the capacity of product?
12 Gallons per Minute
What is the dimensions of the product?
3 3/8" Height x 4 5/8" Width x 11" Length
What is the diameter of the product?
1 1/2" Barb
What is the inlet size of the product?
1-1/2"
Save $97 when you buy the Jabsco Sealed Macerator Self-Priming Pump 12V for only $190 from NVN Marine! Same day shipping before 3pm.
Jabsco Sealed Macerator Self-Priming Pump 12V Videos
Jabsco Sealed Macerator Self-Priming Pump 12V Technical Specifications
Type: | |
---|---|
Vendor: |
Jabsco |
Weight: |
5.3 lb |
Inlet Size: |
1-1/2" |
Outlet Size: |
1-1/2" |
Volts: |
12v |
Type: |
Waste Pumps |
Product Manual: |
Jabsco Sealed Macerator Self-Priming Pump 12V User Reviews
Jabsco Sealed Macerator Self-Priming Pump 12V Shipping & Return
Shipping Weight: |
5.3 lb |
---|---|
Box Sizes: |
4.00 (h) x 5.00 (w) x 13.00 (l) |
Cubic Feet: |
260.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.