Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V

SKU: 29319 - UPC: 874847004299 - MPN: 15008-101
It will be shipped by UPS Ground.
$558.99 $978.17 ( / )

Available Stock : 12

The Lenco Standard Trim Tab Kit is a complete trim tab kit that includes a trim tab, actuator arm, push rod, and all necessary hardware. This kit is designed for boats with an inboard engine or outboard motor.
Lenco Marine
Same Day

Shipping (3PM)

Free Returns

Within 30 days

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V Product Description

Standard Mount Trim Tab Kit12-Gauge Blades / 12-Volt Actuators Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious. Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Lenco 15008101 Attributes

  • Tab Size: 12 Inch Length x 18 Inch Width
  • Material: Stainless Steel

Lenco 15008101 Features & Benefits

  • 12 Gauge - 304 Stainless Steel Blades
  • Fast response electric actuators
  • Fully submersible actuators
  • Plug and Play waterproof connectors
  • Switch Kit sold seperately
  • Limited 3 year warranty

Lenco 15008101 Installation Instructions

Lenco 15008101 Technical Bulletins


12" x 18" Standard Mount Trim Tab Kit without Switch Kit- 12V

Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics.

Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Trim Tab blades are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8" diameter hinge pin. Kits include standard actuators with 5/16" SS bolts.

Kit Contents:

  • 2 each of 12-gauge stainless steel trim tab blades
  • 2 each of #15054-001 actuator with 6' leads and Deutsch plugs
  • 2 each of #30133-103 20' actuator extension wiring harnesses
  • 2 each of #15085-001 (116) upper mounting brackets with gland seal
  • 2 each of #50014-001 (119) lower mounting brackets
  • 1 each of the Lenco owner’s / installation manual
  • All necessary stainless steel mounting hardware

Specifications:

  • Suggested Boat Length: 26' to 36'
  • Length of Tab: 12"
  • Width of Tab: 18"
  • Hinge Height: 2"
  • Minimum Transom Height: 14"
  • Blades: 12 Gauge Stainless Steel
  • Finish: Smooth
  • Switch Kit: Sold Separately
  • Class: Fuel Efficient
  • Compliance: CE Certified
  • Compatibility: Any Boat
  • Actuators: 12-volt

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.



The trim tab is the most important difference between how your boat rides and shows. Lenco's trimming sheet can make your boat ride smooth, dry, faster, and has...

Lenco Upper Mounting Bracket w/Gland Seal (2008-Present)
Lenco Compact Upper Mounting Bracket - 2 Screws 1 Wire
Lenco Standard Upper Mounting Bracket - 3 Screws 1 Wire
Lenco Standard Lower Mounting Bracket - 3 Bolt
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter


Frequently Asked Questions (FAQ) About Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V

Who is the Lenco Marine ?
How to describe Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V?
What is the material of Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V?
What is the weight of the product?
What is the size?
What is the finishing of the product?

Who is the Lenco Marine ?

Trim tabs make the single most important difference in the way your boat will ride and perform. Lenco trim tabs will make your boat ride smoother, drier, faster and with increased safety whether on a high-performance, family cruiser or small skiff. Lenco's ballscrew design is more reliable, twice as powerful and features an instant response which makes them very user friendly.

How to describe Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V?

The trim tab is the most important difference between how your boat rides and shows. Lenco's trimming sheet can make your boat ride smooth, dry, faster, and has...
  • The Lenco ballscrews are precision-machined from stainless steel for durability and long life.
  • Mounts to the boat's hull without drilling, welding or bolting.
  • Simple installation with no electrical work required.
  • 12" x 18" Standard Mount Trim Tab Kit without Switch Kit
  • 12V Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew technology ensures that the trim tab will be in motion at all times, even when the boat is stationary.

Introducing the Lenco Trim Tab Kit! The original trim tab design that started it all. This kit is perfect for most common style boats and is easy to install. The trim tab will help you maintain a straight line and can be adjusted to suit your needs.

What is the material of Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V?

Stainless Steel
  • The Lenco ballscrews are precision-machined from stainless steel for durability and long life.
  • Mounts to the boat's hull without drilling, welding or bolting.
  • Simple installation with no electrical work required.
  • 12" x 18" Standard Mount Trim Tab Kit without Switch Kit
  • 12V Lenco Electric Standard Mount Trim Tab Kits make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ballscrew technology ensures that the trim tab will be in motion at all times, even when the boat is stationary.
  • For the budget conscious who still want to experience the power of electric propulsion
  • Built for most common style boats from center console to cabin cruiser
  • Trim tabs are perfect for running in and out of shallow water and maneuvering in tight spaces

What is the weight of the product?

26

What is the size?

12"L x 18"W

What is the finishing of the product?

Standard


Save $419 when you buy the Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V for only $558 from NVN Marine! Same day shipping before 3pm.

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V Technical Specifications

Type: 

Boat Outfitting | Trim Tabs

Vendor: 

Lenco Marine

Weight: 

14.5 lb

Product Brochure: 

Download PDF

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V User Reviews

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V Shipping & Return

Shipping Weight: 

14.5 lb

Box Sizes: 

7.00 (h) x 13.00 (w) x 25.00 (l)

Cubic Feet: 

2275.0

Returnable: 

Yes

P65: 

Yes

For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.

Lenco 12" x 18" Standard Trim Tab Kit without Switch Kit 12V

$558.99 $978.17 ( / )