Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V
It will be shipped by UPS Ground.
Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V Product Description
9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit- 12V
Upgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the blades
Kit Contents:
- 2 each of 12-gauge stainless steel Electro-Polished trim tab blades
- 2 each of #15054-001 actuators with 6' lead and Deutsch plugs
- 2 each of #30133-103 20' actuator extension wiring harnesses
- 2 each of #15085-001 (#116) upper mounting bracket with gland seal
- 2 each of #50014-001 (#119) lower mounting bracket
- 1 each of the Lenco owner’s / installation manual
- All necessary stainless steel mounting hardware
Specifications:
- Suggested Boat Length: 16' to 26'
- Length of Tab: 9"
- Width of Tab: 12"
- Minimum Transom Height: 13.5"
- Blades: 12 Gauge Stainless Steel
- Finish: Electro-Polished
- Switch Kit: Sold Separately
- Class: Fuel Efficient
- Compliance: CE Certified
- Compatibility: Any Boat
- Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Boats 13 to 40. Including: (2) No. 12 SS blade (2) Actuator (2) Harness (2) Upper mnt bracket (2) Lower mnt bracket.
Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V Related Products
Lenco Upper Mounting Bracket w/Gland Seal (2008-Present)Lenco Compact Upper Mounting Bracket - 2 Screws 1 Wire
Lenco Standard Upper Mounting Bracket - 3 Screws 1 Wire
Lenco Standard Lower Mounting Bracket - 3 Bolt
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" Diameter
Tecnoseal R3 Rudder Anode - Zinc - 3-3/4" Diameter
Tecnoseal R1AL Rudder Anode - Aluminum - 1-7/8" Diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter
Frequently Asked Questions (FAQ) About Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V
Who is the Lenco Marine ?How to describe Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V?
Who is the Lenco Marine ?
How to describe Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V?
- The electro-polished trim blades are stouter and more durable than the base level Lenco Standard Mount Kits
- Trim tab kits come with everything you need to mount your tabs, including high-quality hinge pins
- The upgraded trim blades are electro-polished for a smooth finish and better performance.
- The 1/4" diameter hinge pin is stouter, making the Performance Trim Tab Kit a cut above the base level Lenco Standard Mount Kits.
Save $438 when you buy the Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V for only $583 from NVN Marine! Same day shipping before 3pm.
Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V Technical Specifications
Type: | |
---|---|
Vendor: |
Lenco Marine |
Weight: |
19.18 lb |
Product Brochure: |
Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V User Reviews
Lenco 9" x 12" Standard Performance Trim Tab Kit w/o Switch Kit 12V Shipping & Return
Shipping Weight: |
19.18 lb |
---|---|
Box Sizes: |
5.00 (h) x 13.00 (w) x 14.00 (l) |
Cubic Feet: |
910.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.