C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2" Deep

C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2" Deep Product Description

The Smith 80 Series has the same construction as the 70 Series with everything made larger for big fishing tackle. 80's feature an even larger low profile cap for greater stress distribution and mounting strength. Mirror polishing means they enhance the appearance of any boat. 100 Percent welded cap to tube joint will never break. Integrally cast gimbal bar will stand up to any punishment heavy tackle or downrigger mounts can dish out. White vinyl liners protects rods and are keyed with the gimbal bar to eliminate liner twist. On boats where the bottom of the rod holder is exposed the rounded cast bottom is shin-safe. When installed into a dry storage area, attach a 1/2 Inch hose barb and route a water hose away from the dry area and safely to the bilge.

C.E. Smith Company 53680CA Attributes

• Style: Flush Mount
• Holding Type: Cradle
• Size: 1-7/8 Inch Inner Diameter X 2-1/4 Inch Length Tube
• Finish: Polished
• Color: Silver
• Material: Stainless Steel

C.E. Smith Company 53680CA Features & Benefits

• Built Big For Heavy Tackle
• Safe Rounded Bottom
• 1/2 Inch Pipe Threaded Drain Hole
• 316L Stainless Steel
• Limited 1 Year Warranty

Stainless Steel Rod Holders

• With 1/2" Pipe Threaded Drain Hole

These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.

They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place

ANGLE:	0°
LENGTH:	10-1/2"
I.D.:	1-7/8"

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

With 1/2 inch pipe threaded discharge hole. These larger 80C series models have an exquisite round casting bottom end with a 1/2-inch pipe threaded drain hole. When the bottom... use them

C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2" Deep Related Products

C.E. Smith Replacement Liner f/80 Series Flush Mount - White
C.E. Smith Backing Plate f/80 Series Rod Holders
Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - White
Sika Sikaflex® 291 Fast Cure Adhesive & Sealant 10.3oz(300ml) Cartridge - Black
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - White
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Black
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum Gray
Sika Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Colonial White




Buy with the best price C.E. Smith Flush Mount Rod Holder - 0 Degree 10-1/2" Deep for only $164 from NVN Marine! Same day shipping before 3pm.