Sierra 18-4249 E-Tec Drain Screw W Magnet
Shipping (3PM)
Within 30 days
Sierra 18-4249 E-Tec Drain Screw W Magnet Product Description
Keeping your Evinrude E-TEC outboard running smoothly starts with smart maintenance choices. The Sierra 18-4249 drain screw with its built-in magnet steps up your oil change game by capturing tiny metal shavings that signal potential engine wear. Boat owners swear by this upgrade for spotting issues early and extending gearcase life without the hassle of extra tools.
Why Magnetic Drain Screws Make a Difference in E-TEC Maintenance
Traditional drain plugs let ferrous particles slip through during oil changes, potentially leading to overlooked damage. This Sierra part changes that. The powerful neodymium magnet clings to steel fragments from gears, bearings, or pistons, giving you a clear visual on your engine's health right at the end of the hose.
Standout Features
- Precision-machined from corrosion-resistant materials to withstand saltwater exposure.
- High-strength magnet rated for marine environments, non-destructible under normal use.
- Exact OEM-spec threading for seamless fit—no leaks, no modifications needed.
- Compact design that doesn't alter your lower unit's profile or add drag.
Real-World Benefits
- Early Detection: Spot wear particles before they cause major failures.
- Longer Intervals: Cleaner oil means less frequent changes and fresher lubrication.
- Peace of Mind: Ideal for offshore adventures where downtime isn't an option.
- Cost Savings: Prevents expensive rebuilds by flagging problems proactively.
Perfect Fit for Every E-TEC Model
Engineered specifically for all Evinrude E-TEC outboards, from 25HP workhorses to 300HP beasts. Whether you're running a compact tiller or a beefy V8, this drain screw slots in effortlessly. Double-check your service manual for the gearcase drain location—usually on the lower unit's starboard side.
Quick Installation Guide
- Warm up the engine to operating temp for better oil flow.
- Position the boat for easy access; tilt up if trailering.
- Place a catch pan under the drain and remove the old plug counterclockwise.
- Inspect the magnet area on the new Sierra screw—wipe clean if reusing.
- Hand-thread until snug, then torque to spec (typically 15-20 ft-lbs; consult manual).
- Run a test cycle and check for drips.
Pro tip: Clean the magnet after every oil change under good light. A quick rinse with solvent reveals what your engine's been chewing on.
Maximize Your E-TEC's Lifespan with These Habits
Pair this drain screw with a routine that keeps filings minimal. Flush the gearcase annually if fishing murky waters, and always use manufacturer-recommended gear lube. Magnetic plugs like the Sierra 18-4249 shine in high-hour engines, where subtle wear adds up fast. Anglers and commercial operators report halving unexpected breakdowns after switching.
"Swapped in the Sierra magnet plug last season—caught gear teeth early. Saved my tournament." – avid bass boater
Frequently Asked Questions
Does the Sierra 18-4249 fit all E-TEC outboards?
Yes, it's designed as a direct replacement for every Evinrude E-TEC model, ensuring a perfect thread match without adapters.
How strong is the magnet on this drain screw?
It features a robust neodymium magnet strong enough to capture microscopic steel particles, even in viscous gear oil, while resisting demagnetization from heat or vibration.
Can I reuse the Sierra 18-4249 drain screw multiple times?
Absolutely—clean the magnet thoroughly after each oil change, and it performs like new for years of service.
Will this plug cause any leaks on my E-TEC?
No, its OEM-spec sealing surface and torque guidelines prevent leaks when installed correctly.
What should I do if I see a lot of metal on the magnet?
Excessive shavings warrant a pro inspection—could indicate bearing wear, gear damage, or water intrusion. Act fast to avoid escalation.
Is this drain screw suitable for saltwater use?
Yes, constructed from marine-grade, corrosion-resistant alloys to handle brackish conditions without pitting or failure.
How often should I check the magnet during maintenance?
Inspect after every gear oil change, typically every 100 hours or annually, whichever comes first.
Save $6 when you buy the Sierra 18-4249 E-Tec Drain Screw W Magnet for only $13 from NVN Marine! Same day shipping before 3pm.
Sierra 18-4249 E-Tec Drain Screw W Magnet Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Sierra Engine Parts |
| Weight: |
0.01 lb |
| Description: |
with magnet |
| Fits: |
Replaces J/E 318544 |
Sierra 18-4249 E-Tec Drain Screw W Magnet User Reviews
Sierra 18-4249 E-Tec Drain Screw W Magnet Shipping & Return
| Shipping Weight: |
0.01 lb |
|---|---|
| Box Sizes: |
0.00 (h) x 4.00 (w) x 5.00 (l) |
| Cubic Feet: |
0.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.