Sierra 18-3732 Prop Nut
Shipping (3PM)
Within 30 days
Sierra 18-3732 Prop Nut Product Description
Securing your propeller properly is one of those small but critical details that keeps your boat running smoothly on the water. The Sierra 18-3732 prop nut steps in as a dependable replacement for worn-out originals, designed to lock your prop firmly onto the shaft without the drama of loosening over time. Boaters know the frustration of a prop that slips or wobbles—vibration, lost power, and potential damage to your lower unit. This nut tackles that head-on with its self-locking mechanism, ensuring a tight hold even under high-RPM stress.
Built for Real-World Boating Demands
Crafted from high-strength materials resistant to corrosion from saltwater exposure and freshwater grime alike, this prop nut holds up against the harsh marine environment. Unlike flimsy generics, it's engineered to match the fit and function of major outboard and sterndrive brands, making it a go-to for DIY mechanics and pros alike. Its precise threading grips the shaft without galling, and the integrated washer helps distribute pressure evenly, reducing wear on your prop hub.
From weekend anglers chasing bass to offshore adventurers battling waves, this nut provides peace of mind. It eliminates the need for constant retightening trips, letting you focus on the thrill of the ride rather than mechanical worries.
Key Advantages Over Stock Nuts
- Reliable Self-Locking Design: Stays put through torque and thrust, minimizing spin-off risks.
- Corrosion Resistance: Stainless construction fights rust, extending service life in brackish or salty conditions.
- Easy Compatibility: Fits a wide range of propeller shafts without modifications.
- Cost-Effective Durability: Delivers OEM-level performance at a fraction of dealer prices.
- Quick Swap Potential: Standard sizing means less time wrenching and more time boating.
Installation Tips from Seasoned Mechanics
Swapping out a prop nut isn't rocket science, but doing it right prevents comebacks. Start by trailering your boat on level ground or tilting the motor up. Clean the shaft thoroughly—remove old grease, debris, and inspect for nicks or grooves that could compromise the seal. Slide the prop on, ensuring it seats fully against the thrust washer or gear.
Thread the Sierra 18-3732 nut by hand until snug, then use a prop wrench for final tightening. Aim for manufacturer-recommended torque to avoid over-stressing threads. Insert a new cotter pin through the shaft hole and nut—trim excess and bend the legs securely. Pro tip: Apply marine grease to the shaft taper beforehand for easier future removals, and always spin the prop by hand before launching to check for free rotation.
If you're dealing with a seized nut, a little penetrating oil and heat from a torch can free it without drama. Fresh water rinse after every outing keeps everything pristine.
Spotting When Replacement is Due
Listen for unusual noises like rattling or grinding during operation—these signal a loose nut. Visual checks reveal stripped threads, excessive play, or corrosion pits. If your prop shows hub slippage marks or you've hit debris, don't wait. Regular inspections every 50 hours or after grounding incidents catch issues early, saving you from pricier lower unit repairs.
Pair this nut with fresh shear pins and a quality prop nut wrench for a complete refresh. It's these proactive steps that keep your engine purring season after season.
Frequently Asked Questions
What exactly does a prop nut do on a boat motor?
A prop nut clamps the propeller to the drive shaft, preventing it from spinning freely or detaching under load. It works with washers and cotter pins to handle thrust and torque, ensuring safe propulsion.
Why might my current prop nut fail?
Failures often stem from corrosion, over-torquing, impact damage, or age-related thread wear. Vibration loosens non-locking designs, while saltwater accelerates rust without proper rinsing.
Is the Sierra 18-3732 prop nut suitable for saltwater use?
Yes, its corrosion-resistant materials make it ideal for saltwater environments. Regular flushing extends its life, just like any marine hardware.
How do I remove a stuck prop nut safely?
Secure the prop with a wrench, apply penetrating oil, and tap gently. For stubborn cases, mild heat helps expand the nut. Avoid excessive force to prevent shaft damage.
Does this prop nut require special tools for installation?
A standard prop nut wrench or socket is typically all you need, plus pliers for the cotter pin. No exotic gear required for most setups.
Can I reuse an old cotter pin with a new prop nut?
No—always use a new one. Bent or fatigued pins snap under stress, risking failure. It's a cheap safeguard with big safety payoffs.
How often should I inspect my prop nut?
Check before every major outing, after beaching or impacts, and during routine service—every 50 hours or annually. Early detection avoids breakdowns.
Save $2 when you buy the Sierra 18-3732 Prop Nut for only $13 from NVN Marine! Same day shipping before 3pm.
Sierra 18-3732 Prop Nut Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Sierra Engine Parts |
| Weight: |
0.06 lb |
| Application: |
Yamaha |
| OEM #: |
90171-16011-00, 95307-16900-00, 90171-14056-00 |
Sierra 18-3732 Prop Nut User Reviews
Sierra 18-3732 Prop Nut Shipping & Return
| Shipping Weight: |
0.06 lb |
|---|---|
| Box Sizes: |
0.00 (h) x 4.00 (w) x 5.00 (l) |
| Cubic Feet: |
0.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.