Sierra 18-3090 3090 Johnson/Evinrude Impeller
Shipping (3PM)
Within 30 days
Sierra 18-3090 3090 Johnson/Evinrude Impeller Product Description
Keep Your Outboard Running Cool with the Sierra 18-3090 Impeller
Nothing disrupts a day on the water like an overheated engine. The Sierra 18-3090 impeller is your reliable solution for maintaining peak cooling performance in Johnson and Evinrude outboards. This precision-engineered water pump impeller draws water efficiently to prevent dangerous temperature spikes, ensuring your motor stays protected during long runs or high-speed cruises.
Crafted as a direct aftermarket replacement, it matches the original equipment's durability and flow characteristics. Boat owners trust Sierra parts for their consistent quality, making this impeller a smart choice for routine maintenance or emergency fixes.
Why This Impeller Stands Out for Johnson/Evinrude Owners
- Superior Material Construction: Made from high-grade neoprene rubber that's resistant to heat, oil, and wear—common culprits in marine environments.
- Optimized Blade Design: Delivers maximum water flow with minimal cavitation, reducing strain on your engine's water pump housing.
- Easy Swap Compatibility: Drops in place of OEM part 3090, saving you time and hassle without custom modifications.
- Proven Reliability: Sierra's rigorous testing ensures it performs under real-world conditions, from freshwater lakes to saltwater bays.
Whether you're prepping for fishing season or troubleshooting a sputtering pump, this impeller restores factory-fresh cooling efficiency.
Signs Your Impeller Needs Replacing
Spot these red flags early to avoid bigger problems:
- Engine temperature gauge climbing unexpectedly.
- Reduced water stream from the tell-tale outlet.
- Visible chunks of rubber in the cooling water.
- Steam or unusual noises from the lower unit.
Regular inspections every season—or after 100 hours of use—can extend your outboard's life significantly.
Step-by-Step Installation Guide
Replacing your impeller is a straightforward DIY job that takes under an hour with basic tools. Always work in a clean, dry area and follow safety protocols.
- Prep the Motor: Disconnect the battery, tilt the outboard up, and drain the water from the lower unit.
- Access the Pump: Remove the lower unit bolts and carefully slide it off the driveshaft.
- Remove Old Impeller: Use impeller puller tools or needle-nose pliers to extract the worn unit without damaging the housing.
- Inspect and Clean: Check the pump housing, keyway, and liner for wear. Lubricate with marine grease.
- Install New Impeller: Twist it onto the pump shaft with the correct orientation—blades should flex inward when pressed.
- Reassemble and Test: Torque bolts to spec, reconnect everything, and run a flush test on muffs before hitting the water.
Pro Tip: Soak the new impeller in hot water for a few minutes to soften it, making insertion smoother.
Maximize Longevity with Smart Maintenance
Pair your Sierra 18-3090 with these habits for years of trouble-free operation:
- Flush the cooling system after every saltwater trip.
- Winterize properly by draining and inspecting the pump.
- Use ethanol-free fuel to minimize corrosion risks.
- Monitor impeller condition during annual servicing.
Investing in quality replacements like this one pays off in fewer breakdowns and more time enjoying the water.
Frequently Asked Questions
What types of Johnson and Evinrude engines use the Sierra 18-3090 impeller?
This impeller fits a range of 2-stroke Johnson and Evinrude outboards, typically in the mid-horsepower range. Always cross-reference with your engine's serial number or a fitment guide for exact matches.
Is the Sierra 18-3090 made from the same material as OEM impellers?
Yes, it's constructed from durable neoprene rubber that meets or exceeds OEM standards for flexibility, heat resistance, and longevity.
How often should I replace the water pump impeller?
Inspect annually and replace every 2-3 years or 100-200 hours of operation, depending on usage and water conditions.
Can I install this impeller without special tools?
Basic tools like pliers, screwdrivers, and a torque wrench suffice. An impeller tool makes it easier but isn't essential for most DIYers.
Will this impeller work in saltwater environments?
Absolutely—its corrosion-resistant design handles saltwater exposure well when paired with proper flushing routines.
Does Sierra offer a warranty on the 18-3090 impeller?
Sierra parts come with a manufacturer's warranty against defects—check product packaging for specific terms.
What's the difference between this and a genuine OEM impeller?
Sierra provides equivalent performance at a fraction of the cost, with the same fit and material specs, backed by marine industry standards.
Save $8 when you buy the Sierra 18-3090 3090 Johnson/Evinrude Impeller for only $18 from NVN Marine! Same day shipping before 3pm.
Sierra 18-3090 3090 Johnson/Evinrude Impeller Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Sierra Engine Parts |
| Weight: |
0.06 lb |
| Replaces: |
387361, 763735 |
Sierra 18-3090 3090 Johnson/Evinrude Impeller User Reviews
Sierra 18-3090 3090 Johnson/Evinrude Impeller Shipping & Return
| Shipping Weight: |
0.06 lb |
|---|---|
| Box Sizes: |
0.00 (h) x 4.00 (w) x 5.00 (l) |
| Cubic Feet: |
0.0 |
| Returnable: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.