Humminbird XAP-9-20 Angled Puck Transducer

Humminbird XAP-9-20 Angled Puck Transducer Product Description

Angled Puck Transducer

Inside Hull Transducers mount to the inside of most fiberglass boat hulls and transmit the sonar signal through the hull. On hulls with a deadrise less than 15 degrees, a flat bottom transducer should be used. For angles greater than 15 degrees, an angled transducer is recommended to assure the sonar signal travels downward.

Description: Single/Dual Puck Angled Transducer.
For Use With: Piranha 1, Piranha 2, Piranha 3, Piranha 4, Piranha 5, Matrix 15, Matrix 17, Matrix 25, Matrix 27, Matrix 55, Matrix 65, Matrix 67, Matrix 97, FF515, FF535, FF565.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

The angled ice ball sensor inside the hull is installed inside most fiberglass hulls and transmits sonar signals through the hull. On the hull with little dead skin...

Humminbird XAP-9-20 Angled Puck Transducer Related Products

Airmar Deadrise Angle Finder - Accuracy of ± 1/2°
Humminbird EC M10 Transducer Extension Cable - 10'
Humminbird EC M30 Transducer Extension Cable - 30'


Save $18 when you buy the Humminbird XAP-9-20 Angled Puck Transducer for only $51 from NVN Marine! Same day shipping before 3pm.