BLUE SEA 7405 CIRCUIT BREAKER SC1 25A
We are sorry, this product sold out!
BLUE SEA 7405 CIRCUIT BREAKER SC1 25A PRODUCT DESCRIPTIONSingle Pole Small Case 2" Flat Rocker Circuit Breaker
Amperage: 25 Amp
- Color actuator indicates "OFF" position
- "Trip Free" design cannot be held "ON" during fault current condition
|Circuit Breaker Type||Magnetic Hydraulic - Trip Free|
|Maximum Voltage||250 Volts AC / 80 Volts DC|
|Rated Switch Cycles||10,000@rated amperage and voltage|
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Tailor-made circuit protection with a modern look rarely comes pre-installed on the circuit breaker panel with the exact circuit protection your system requires. Each electrical system is unique to the ship and the shipowner. Inevitably, the circuit breaker must be replaced to meet the demands of existing or changing electrical loads. Blue Sea Systems makes it simple. The A series circuit breaker combines circuit protection and switching into a flat rocker, designed to fit the Blue Sea Systems 360 panel and SMS panel housing. These modern-looking circuit breakers use the same mounting holes and can be quickly replaced with the correct protection device. All A series circuit breakers have now obtained CE certification and continue to comply with ABYC and USCG standards. These circuit breakers can handle short-start current surges that occur in motors and other appliances without tripping. To increase safety, the non-trip function prevents the toggle switch from being held in the ON position when a fault is detected. These single-pole circuit breakers can provide 2.5A-50A protection. There will be an application that matches your application and the circuit breaker panel. The key feature combines switch and circuit protection into one toggle switch. Compatible with AC or DC circuit industry standards, and compatible with Blue Sea Systems 360 electrical panels and SMS panel enclosures. The trip function can be easily changed. Means that the switch cannot remain ON in the event of a fault The position can detect the electromagnetic hydraulic delay trip mechanism, which can recognize the surge caused by the starting current and will not trip. Enhances the ability to interrupt higher currents without failure, and is suitable for 2.5A to 50A ratings.
Save $15 when you buy the BLUE SEA 7405 CIRCUIT BREAKER SC1 25A for only $16 from NVN Marine! Same day shipping before 3pm.