Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
It will be shipped by UPS Ground.
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect Product Description
Battery switches isolate the potentially destructive energy in the battery banks when the boat is not in use or during emergencies. Switches isolated battery banks to all loads or combines battery banks to all loads.
Blue Sea 3003BSS Attributes
- Used To: Switch Isolated Battery Banks To All Loads/ To Combine Battery Banks To All Loads
- Number Of Position: 4
- Battery Input: 2 Batteries
- Voltage Rating: 32 Volt
- Ampere Rating: 700 Amp Intermittent Rating And 500 Amp Continuous Rating
- Color: Black
- With Alternator Field Disconnect: Yes
- With Ignition Protection: Yes
Blue Sea 3003BSS Features & Benefits
- Make-Before-Break Contact Design Allows Switching Between Battery Banks Without Power Interruption
- Accepts Two 4/0 AWG Battery Cables
- Tin-Plated Copper Studs For Maximum Conductivity And Corrosion Resistance
- Tactile Indicator Conveys Knob Position By Feel
- Waterproof – Rated IP66 From Water Projected In Powerful Jets
- Case Design Allows Surface, Rear, Or Front Panel Mounting Options
- Ignition Protected—safe For Installation Aboard Gasoline Powered Boats
- Limited 2 Year Warranty
Blue Sea 3003BSS Installation Instructions
Blue Sea 3003BSS Technical Bulletins
3003 HD-Series Battery Switch Selector with Alternator Field Disconnect
Features:
- 500 Ampere Continuous Rating
- Accepts 4/0 battery cables
- Ignition protected - safe for installation aboard gasoline powered boats
- .870" (22.01mm) stud length to accept 4 or more cable terminals
- 1/2" (M12) Tin-plated copper studs for maximum conductivity and corrosion resistance
- Meets American Boat and Yacht Council (ABYC) requirements for battery switches
- Tactile textures indicate knob position by feel only
- Case design allows surface or rear panel mounting
- Fits all Perko and Guest low amperage battery switch hole patterns
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
These Blue Sea Systems four-position battery switches can provide 500 amps of current for large diesel engines. These switches can switch the isolated battery pack to all loads, or combine the battery pack to all loads, and have tinned copper studs for maximum conductivity and corrosion resistance. The stud accepts 1/2" (M12) ring terminals and has a 7/8" stud length (22mm) that can accommodate multiple cable terminals. Accepts up to 4/0 AWG battery cables. Blue Sea Systems' one-piece terminal design will not loosen over time. One-piece stainless steel flange nuts ensure a safe and reliable connection. Suitable for most Perko and Guest low-current battery switch hole styles. The chassis design allows surface or rear panel mounting options. The tactile indicator communicates the position of the knob through tactile sensation. The 5444 includes an AC generator excitation isolation switch (AFD), which protects the diode in the alternator when the switch is switched to the OFF position when the engine is running. If you do not use AFD to protect the alternator, you can connect an LED to the AFD terminal to indicate when the battery switch is in any position other than OFF.
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect Related Products
Blue Sea 7902 Icon Circuit Identification Label Kit for Battery SwitchesAncor Red 4 AWG Battery Cable - Sold By The Foot
Ancor Red 2 AWG Battery Cable - Sold By The Foot
Ancor Red 1 AWG Battery Cable - Sold By The Foot
Ancor Red 1/0 AWG Battery Cable - Sold By The Foot
Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
Ancor Heavy Duty Lugs - 4 Gauge Wire - 1/2" Post - 2-Pack
Ancor Heavy Duty Lugs - 2 Gauge Wire - 1/2" Post - 2-Pack
Ancor Heavy Duty Lugs - 1/0 Gauge Wire - 1/2" Post - 2-Pack
Ancor Heavy Duty Lugs - 2/0 Gauge Wire - 1/2" Post - 2-Pack
Frequently Asked Questions (FAQ) About Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect
Who is the Blue Sea Systems?How to describe Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect?
Which positions are exists in this product?
What's the color of Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect?
Is this switch has alternator field disconnect option?
Who is the Blue Sea Systems?
How to describe Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect?
Which positions are exists in this product?
What's the color of Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect?
Is this switch has alternator field disconnect option?
Save $89 when you buy the Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect for only $67 from NVN Marine! Same day shipping before 3pm.
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect Technical Specifications
Type: | |
---|---|
Vendor: |
Blue Sea Systems |
Weight: |
1.3 lb |
Positions: |
4 |
AFD: |
Yes |
Continuous Amperage: |
700a |
Product Manual: |
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect User Reviews
Blue Sea 3003 HD-Series Battery Switch Selector w/Alternator Field Disconnect Shipping & Return
Shipping Weight: |
1.3 lb |
---|---|
Box Sizes: |
3.00 (h) x 7.00 (w) x 9.00 (l) |
Cubic Feet: |
189.0 |
Returnable: |
Yes |
P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.