Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz

Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz Product Description

Humminbird has built its reputation by designing and manufacturing top quality, thoroughly reliable marine equipment. Your Humminbird is designed for trouble-free use in even the harshest marine environment. We encourage you to read this manual carefully in order to get the full benefit from all the features and applications of your Humminbird product.

Humminbird 7101661 Attributes

• Mounting Location: Hull Mount
• Frequency Range: 83/ 200 kHz Beam Frequency
• Supported Angle: 60/ 20 Degree Beam Angle
• Cable Length: 30 Feet

Humminbird 7101661 Features & Benefits

• Fishfinder For Humminbird Is Equipped With A High-Quality Transducer
• Designing And Manufacturing Top Quality, Thoroughly Reliable Marine Equipment
• Designed For Trouble-Free Use In Even The Harshest Marine Environment
• Made In USA
• Limited 1 Year Warranty

Humminbird 7101661 Installation Instructions

• 531953-3_B HELIX Start-Up Notice.pdf
• 530513-6_A Bronze Thru-Hull Transducer Installation Guide.pdf

Humminbird 7101661 Warranties

• Humminbird 1-Year Limited Warranty.pdf

Humminbird 7101661 Technical Bulletins

• 532651-1EN_A Transducer Resource Guide.pdf
• 532651-1EN_A Transducer Resource Guide.pdf
• 530513-6_A Bronze Thru-Hull Transducer Installation Guide.pdf

Bronze Thru Hull Transducer

Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers.

Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

It is not recommended to be used on a tug, because a hole needs to be drilled in the hull and the shape of the fairing is required, so it must be professionally installed. The sensor is suitable for single or double beams, the beam angle is 20/60 degrees, and the working frequency is 200/83 k Hz. It comes with a 30-foot connecting cable and all necessary mounting hardware, but does not include the fairing.

Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz Related Products

Airmar Deadrise Angle Finder - Accuracy of ± 1/2°
Humminbird EC M10 Transducer Extension Cable - 10'
Humminbird EC M30 Transducer Extension Cable - 30'
Sudbury Elastomeric Marine Sealant - 10oz Cartridge - White
Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Black
Sudbury Elastomeric Marine Sealant - 10oz Cartridge - Clear
Sudbury Elastomeric 3 oz (89ml) Sealant Tube - White
Sudbury Elastomeric 3 oz (89ml) Sealant Tube - Clear
Sudbury Elastometric 3 oz (89ml) Sealant Tube - Black
BoatLIFE Life-Calk Sealant Tube - Non-Shrinking - 2.8 FL. Oz - White




Save $121 when you buy the Humminbird XTH-9-20 Bronze Thru-Hull Transducer - 83/200 kHz for only $308 from NVN Marine! Same day shipping before 3pm.