Raymarine P79 Adjustable In-Hull Transducer

Raymarine P79 Adjustable In-Hull Transducer Product Description

The P79 adjustable, in-hull depth transducer is ideal for boats with fiberglass hulls looking for a fast and easy installation, high-speed performance, or those who want to minimize drag. The transducer installs inside of the boat's hull, transmitting and receiving echoes through the solid fiberglass bottom with no hull protrusion whatsoever. P79 comes with an innovative flange that installs on the inside of the boat's hull using quick-setting marine epoxy. No cutting or drilling is required. Using built-in markings the flange is aligned to match the dead rise angle of the boat's hull. Once set in place and made liquid-tight, the flange is filled with propylene glycol non-toxic antifreeze and the active transducer cap is attached. Finally, the transducer cap is dialed-in and locked in place for a straight-down beam and maximum echo returns. The design of the P79 accommodates a wide range of dead rise angles from 2 Degree to 22 Degree. This transducer is intended for use on vessels with solid fiberglass hulls with a maximum thickness of 5/8 Inch. P79 can also be used on aluminum hulls less than 3.8 Millimeter thick.

Raymarine E66008 Attributes

• Mounting Location: In-Hull Mount
• Number Of Pins: 8
• Depth: 1000 Feet Maximum Depth At Low Frequency/ 600 Feet Maximum Depth At High Frequency
• Power Rating: 600 Watt
• Frequency Range: 50/ 200 kHz Frequency
• Supported Angle: 45/ 12 Degree Beam Width/ 2 To 22 Degree Deadrise
• Cable Length: 30 Feet

Raymarine E66008 Features & Benefits

• Using Built-In Markings The Flange Is Aligned To Match The Dead Rise Angle Of The Boat's Hull
• P79 Adjustable, In-Hull Depth Transducer Is Ideal For Boats With Fiberglass Hulls Looking For A Fast And Easy Installation, High-Speed Performance
• Transducer Installs Inside Of The Boat's Hull, Transmitting And Receiving Echoes Through The Solid Fiberglass Bottom With No Hull Protrusion Whatsoever
• Features Innovative Flange That Installs On The Inside Of The Boat's Hull Using Quick-Setting Marine Epoxy
• No Cutting Or Drilling Is Required
• Limited 2 Year Warranty

Raymarine E66008 Warranties

• Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf

Compatible with the following Echo Sounders:

SL Series: SL755RC, SL760RC , SL1250, and SL1250RC

hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC

hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC

Compatible hull material: fiberglass

Max Power: 600 W

Frequency: 200/50 kHz

Beam Angles: 200 kHz 11 50 kHz 45

Features:

• Depth only.
  
• Can be used in conjunction with the E66019 ST69 speed and temperature sensor
  
• Easily adjusts to any deadrise angle up to 22
  
• Transmits sound waves directly at the bottom so strong echoes are reflected back to the transducer
  
• Can be removed in seconds for servicing or storage
  
• Only the base piece is bonded to the hull. There is no adhesive layer under the transducer face to absorb sound energy
  
• Simplifies in-hull installation

30ft (10m) Cable

Raymarine P79 Adjustable In-Hull Transducer Related Products