NewMar PI10WH Intercom
NewMar PI10WH Intercom — Product description
Enhance Onboard Communication with Reliable Wired Intercoms
Imagine seamless voice contact across your vessel, from the helm to the engine room or galley, without shouting over engine noise or relying on spotty wireless signals. The NewMar PI-10(WH) delivers exactly that—straightforward, dependable point-to-point communication designed for the demanding marine environment. Built tough with high-impact plastic, this white intercom handset stands up to saltwater splashes, vibrations, and constant use, making it a go-to choice for boaters who prioritize clarity and simplicity.
Whether you're coordinating crew during a busy charter, checking in with family on a weekend cruise, or ensuring safety in tight quarters, this 10-station system turns your boat into a connected hub. No apps, no batteries to charge—just lift, press, and talk.
Key Features That Set It Apart
- 10 Dedicated Call Buttons: Quickly connect to any of up to 10 stations with one-touch ease—no dialing codes or menus to fumble with.
- Marine-Tough Construction: High-impact plastic housing resists corrosion and impacts, perfect for bulkheads in cockpits, cabins, or below decks.
- Low-Voltage Operation: Runs cleanly on 12 VDC, integrating effortlessly with your boat's existing power setup without draining batteries.
- Bulkhead Mounting Ready: Includes a sturdy bracket for secure, flush installation on any vertical surface.
- White Finish for Clean Aesthetics: Blends seamlessly with modern yacht interiors while staying highly visible.
These aren't just specs; they're practical solutions honed from years of real-world boating feedback. Boaters rave about how it cuts down response times during maneuvers or emergencies.
How the PI-10 Intercom Simplifies Vessel Operations
Setup is as marine-simple as it gets. Each handset connects via standard 22 AWG wire in a daisy-chain configuration—remember to factor in conductors by adding three to your station count (like eight wires for a five-station setup). Wire runs stay hidden in conduits or behind panels, keeping your deck pristine.
Once wired, operation is intuitive: Pick up the receiver, hit the button for your target station, and communicate crystal-clear. Full-duplex audio ensures natural conversations, even in noisy conditions. It's the wired reliability that wireless systems can't match—no interference from VHF radios, GPS, or weather.
"Switched to this from a handheld radio setup—night and day difference in quick, private comms across the boat." – Experienced charter captain
Installation Tips for Flawless Performance
To get the most from your intercom:
- Plan Your Wiring Route: Measure distances between stations and use shielded cable if running near high-power lines to minimize hum.
- Mount Strategically: Position at ergonomic heights (about chest level) for easy access, away from direct water exposure.
- Power It Right: Fuse at 1-2 amps and connect to a switched 12V circuit for automatic shutoff when the boat's off.
- Test Incrementally: Wire one station at a time, powering up to verify each link before full expansion.
- Label Buttons: Custom stickers for 'Helm,' 'Engine,' etc., speed up daily use.
Pro tip: In humid climates, add desiccant packs near connections to prevent moisture buildup. Most installs wrap up in an afternoon for handy skippers.
Why Wired Intercoms Excel in Marine Settings
Wireless options promise convenience but falter with range limits, battery fails, and signal dropouts amid metal hulls. This wired system guarantees instant connectivity everywhere onboard, boosting safety and efficiency. It's especially vital for larger vessels where yelling won't cut it, or multi-person crews needing hands-free coordination.
Longevity is another win—minimal moving parts mean years of service with basic wipe-downs, outlasting gadgets that need constant updates or charging.
Keep Your Intercom Running Strong
Maintenance boils down to prevention: Rinse salt residue with fresh water after offshore trips, inspect wires for chafe annually, and clean contacts with electronics spray. In storage, disconnect power to avoid idle draw. With care, it'll outlive your current hull.
Frequently Asked Questions
Ten Station Phone Com, WhiteConvenient, Simple On-Board CommunicationsThe PI-10 handset has 10 call buttons allowing for multiple station calling capability of up to 10 independent stations.Each phone is sold separately and interconnect wire (22 AWG) is not included. To determine the wire conductor requirements for the system add 3 to the total number of stations (example: 5 station system requires 8 conductor wire).The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided.
NewMar PI10WH Attributes
SKU: NVN-2006555
MPN: PI-10(WH)
UPC:
Technical specifications
| Brand | NewMar |
| Model | NewMar PI10WH Intercom |
| SKU / MFR# | 2006555 |
Set product metafields under specs.* to populate this table.
Frequently asked questions
No questions yet. Got one? Drop us a line.
