Navico NMEA 0183 Interface Cable
Shipping (3PM)
Within 30 days
Navico NMEA 0183 Interface Cable Product Description
Upgrading your boat's electronics doesn't have to mean starting from scratch. The Navico NMEA 0183 Interface Cable acts as a seamless bridge, letting you connect legacy NMEA 0183 gear—like trusty old GPS receivers, autopilots, or depth sounders—with cutting-edge NMEA 2000 networks. This bi-directional gateway keeps your vessel's systems talking smoothly, whether you're out on a weekend sail or tackling longer offshore runs.
Imagine plotting courses with your reliable chartplotter while pulling live data from modern multifunction displays (MFDs). That's the flexibility this cable delivers, saving time, effort, and headaches during refits.
Why Boaters Choose This Interface for Seamless Integration
In the world of marine electronics, compatibility is king. NMEA 0183, the veteran standard from the '80s, uses simple serial communication for point-to-point data sharing. NMEA 2000 flips the script with a robust CAN bus network, supporting multiple devices at higher speeds and with plug-and-play ease. This interface unites them, so you can mix and match without signal loss or endless rewiring.
- Retrofit Ready: Bolt on new sensors like high-res fishfinders or radar while your existing VHF or instruments stay online.
- Customizable Data Flow: Filter incoming and outgoing sentences, tweaking transmit rates through Navico software for optimized performance—no cluttering your displays with junk data.
- Proven Reliability: Built to NMEA 2000 specs with a rugged Micro-C connector that withstands saltwater spray, vibration, and tight engine room installs.
It's not just about connection; it's about future-proofing. Add AIS receivers or engine monitors to your NMEA 2000 backbone without ditching proven NMEA 0183 performers.
Effortless Setup for Any Skill Level
Installation boils down to three steps: mount the compact unit in a dry spot, snap the Micro-C into your NMEA 2000 backbone, and wire the NMEA 0183 terminals to your devices. No special tools needed beyond basic crimpers.
- Power cycle your network and locate a drop cable spot.
- Secure the low-profile housing with screws or ties—fits behind panels or dash mounts.
- Configure via your Lowrance, Simrad, or B&G MFD: select sentences like GGA, RMC, or VTG for position, speed, and heading data.
Pro tip: Test with Navico's diagnostic tools to verify baud rates (typically 4800 for NMEA 0183) and ensure Version 4.1 compliance for advanced features like multiple talkers.
Real-World Wins on the Water
Sailors retrofitting older Beneteaus keep their Raymarine instruments feeding Simrad MFDs for hybrid navigation. Powerboaters integrate legacy engine data with Lowrance LiveSight sonar, spotting fish while monitoring temps and RPMs in one dashboard. Even commercial ops use it to blend third-party weather stations with NMEA 2000 plotters.
"Swapped in this interface and my whole setup came alive—old GPS feeding new charts without a hitch." – Coastal cruiser feedback.
Troubleshoot common snags like ground loops by isolating power supplies, and you're golden for seasons of reliable operation.
Frequently Asked Questions
What does the NMEA 0183 Interface Cable do?
It serves as a bi-directional gateway, translating data between NMEA 0183 devices and NMEA 2000 networks, enabling hybrid setups on boats.
Is this cable compatible with Lowrance and Simrad displays?
Yes, it's fully compatible with Lowrance, Simrad, and B&G MFDs and instrument displays, supporting easy configuration and data filtering.
Can I filter specific NMEA sentences with this interface?
Absolutely. Use Navico software to filter RX/TX sentences and adjust transmit frequency, keeping your network clean and efficient.
What's the difference between NMEA 0183 and NMEA 2000?
NMEA 0183 is a serial protocol for basic device-to-device talk. NMEA 2000 is a networked system for faster, multi-device sharing with plug-and-play connectors.
How easy is installation for a DIY boater?
Very straightforward—simple mounting, Micro-C plug-in, and terminal wiring. No advanced tools required, with low-profile design for hidden installs.
Does it support NMEA 0183 Version 4.1?
Yes, it fully supports NMEA 0183 Version 4.1, handling advanced multi-talker scenarios and high-data-rate applications.
What connector does it use for NMEA 2000?
It features a standard Micro-C connector, ensuring quick, secure integration into any compliant NMEA 2000 backbone.
NMEA 0183 Interface Cable
The NMEA 0183 interface provides a bi-directional gateway between an NMEA 2000® network and NMEA 0183 devices.
Ideal for retrofitting NMEA 2000 devices while retaining existing NMEA0183 components, this interface allows boaters a simple way to upgrade to newer technology, sensors, and devices without replacing a whole system. For existing NMEA 2000® networks and systems, this also allows a user to add NMEA 0183 devices to your network, allowing you to choose the products best suited to your boat and sailing.
Simple mounting, connectivity, and a low-profile design allow for easy installation.
Features
- Easy to install
- Allows older products to connect to new, more modern products
- Supports NMEA 0183 Version 4.1
- Filter NMEA 0183 rx/tx sentences and configure transmit frequency via Navico®
- Compatible with Lowrance®, Simrad®, and B & G® MFDs and instrument displays
- NMEA 2000 Compliant
- Standard Micro-C connector
Save $24 when you buy the Navico NMEA 0183 Interface Cable for only $190 from NVN Marine! Same day shipping before 3pm.
Navico NMEA 0183 Interface Cable Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Navico |
Navico NMEA 0183 Interface Cable User Reviews
Navico NMEA 0183 Interface Cable Shipping & Return
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.