Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle
Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle Product Description
Sikaflex® 295 UV - White - 10oz Tube with Nozzle
Exterior sealant and direct glazing adhesive for organic glass in Marine applications. Sikaflex®-295 UV is a 1-component polyurethane adhesive of paste-like consistency that cures on exposure to atmospheric moisture. It is suitable for interior and exterior sealing applications and to bond organic glass in the Marine business. Sikaflex®-295 UV meets the requirements set out by the International Maritime Organization (IMO).
Features:
- Excellent application properties
- Resistant to aging and weathering
- Suitable for organic glasses
Areas of Application
Sikaflex®-295 UV has been specially developed for the marine industry, where it is used to bond and seal plastic glazing materials in boats and ships. Because of its excellent weatherability this product can also be used to seal joints in exposed areas. Suitable substrates are aluminum (bright or anodized), GRP (polyester resin), stainless steel, timber, 2-component coatings, and plastic glazing materials (PC, PMMA). Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-295 UV on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Product Benefits:
- Excellent application properties
- Resistant to aging and weathering
- Suitable for organic glasses
- Approved for the OEM market
- Wheelmark approved
Surface Preparation:
Surfaces must be clean, dry, and free from grease, oil, dust, and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long-lasting bond. Suggestions for surface preparation may be found on the current edition of the appropriate Sika® Pre-treatment Chart. Consider that these suggestions are based on experience and have in any case to be verified by tests on original substrates.
Application:
Sikaflex®-295 UV can be processed between 10 °C and 35 °C (climate and product) but changes in reactivity and application properties have to be considered. The optimum temperature for substrate and sealant is between 15 °C and 25 °C.
Consider that the viscosity will increase at low temperatures. For easy application, condition the adhesive at ambient temperature prior to use. To ensure a uniform thickness of the bonding it is recommended to apply the adhesive in form of a triangular bead.
Tooling & Finishing
Tooling and finishing must be carried out within the skin time of the product. It is recommended to use Sika® Tooling Agent N. Other finishing agents must be tested for suitability and compatibility prior to the use.
Removal
Uncured Sikaflex®-295 UV can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically. Hands and exposed skin have to be washed immediately using Sika® Cleaner-350H cleaning towels or a suitable industrial hand cleaner and water. Do not use solvents on the skin.
Overpainting
Sikaflex®-295 UV can be painted prior to and after the formation of the skin. If the painting process takes place after the sealant has built a skin, adhesion could be improved by treating the joint surface with Sika® Aktivator-100 or Sika® Aktivator-205 prior to the painting process. If the paint requires a baking process (> 80 °C), the best performance is achieved by allowing the sealant to fully cure first. All paints have to be tested by carrying preliminary trials under manufacturing conditions. The elasticity of paints is usually lower than that of sealants. This could lead to cracking of the paint in the joint area.
Sikaflex® 295UV UV Resistant Adhesive/Sealant - 10.3oz(300ml) Cartridge - White
Sikaflex®-295 UV is a fast curing, UV resistant, one-component, flexible, high performance polyurethane-based adhesive that bonds and seals in one step for bonding and sealing of windows and portholes.
Use:
Sikaflex®-295 UV white is intended to be used as an adhesive and/or sealant in bonding applications for polycarbonate windows and acrylic (PMMA) windows. White: Use in conjunction with Sika®-Cleaner 226 and Sika® Primer 209N. Prior to use, always refer to installation guide available at www.sikaindustry.com/ ipd-marine-window-295.
Characteristics & Adhesives:
- Salt water resistant
- Fast tack-free time
- Paintable and sandable
- Initial load bearing capacity
- High thixotropy/good gap filling properties
- Non-yellowing, cracking and chaulking
Frequently Asked Questions (FAQ) About Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle
Who is the Sika?What is the capacity of product?
What is the battery type?
Who is the Sika?
What is the capacity of product?
What is the battery type?
Save $5 when you buy the Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle for only $19 from NVN Marine! Same day shipping before 3pm.
Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle Technical Specifications
Type: | |
---|---|
Vendor: |
Sika |
Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle User Reviews
Sika Sikaflex® 295 UV - White - 10oz Tube w/Nozzle Shipping & Return
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.