Furuno 001-507-030-00 NMEA2000 Micro Cable 2 Meter Female to Pigtail

Streamline Your Marine Network with Reliable Connectivity

Building a robust NMEA2000 network on your vessel starts with the right cabling. This 2-meter micro cable transitions seamlessly from a female micro connector to a pigtail end, giving you the flexibility to integrate Furuno devices or custom setups without hassle. Marine environments demand cables that withstand saltwater spray, vibrations, and constant motion— this one delivers with rugged construction designed for long-term performance on the water.

Whether you're wiring up a new multifunction display, autopilot, or sensor array, this cable minimizes signal loss and ensures plug-and-play simplicity where possible, while the pigtail allows precise tailoring to your power or backbone needs.

Standout Features for Everyday Boating Reliability

• Precise Length: Exactly 2 meters to fit tight console spaces or extend just enough for clean routing around bulkheads.
• Dual-End Design: Female micro connector mates directly with Furuno chartplotters, fishfinders, and transducers; pigtail end strips easily for soldering or crimping to T-connectors, terminators, or power drops.
• Marine-Grade Durability: Tinned copper conductors resist corrosion, while the jacket shrugs off UV exposure and abrasion from deck hardware.
• NMEA2000 Compliant: Supports full 12V backbone speeds up to 250 kbps, maintaining data integrity for GPS, depth, speed, and engine data sharing.
• Compact Micro Profile: Slimmer than standard cables, ideal for retrofits in crowded helm stations without bulky overwrapping.

Why This Cable Excels in Real-World Installs

Skip the frustration of mismatched connectors or brittle wiring that fails mid-trip. Boat owners rave about how this cable simplifies drops from the main backbone to drop cables, reducing clutter and failure points. It's a go-to for DIYers upgrading older NMEA0183 systems or pros installing full Furuno networks on center consoles, sailboats, or offshore rigs.

Pro tip: In high-vibration areas like engine rooms, secure with zip ties every 30 cm and avoid sharp bends—keeps data flowing crisp even during rough seas.

Compatibility That Keeps Your Setup Seamless

Plugs right into Furuno's ecosystem, including GP series plotters, NavNet systems, and DRS radars. Also works universally with any NMEA2000-certified gear from Lowrance, Garmin, Simrad, or Raymarine—micro female end ensures broad interoperability. The pigtail handles custom splices to 120-ohm terminators or power tees without adapters.

"Finally, a cable that doesn't fight you during install. Paired it with my Furuno TZT2 and haven't looked back." – Experienced offshore angler

Installation Made Simple: Step-by-Step Guidance

1. Plan your backbone route, ensuring no more than 100 meters total network length.
2. Strip the pigtail end: 10mm outer jacket, twist pairs, crimp to Micro-C connectors or butt-splice.
3. Connect female micro to your device drop port—listen for the click.
4. Test with a multimeter for continuity; power up and verify via NMEA reader app.
5. Route away from alternators or fluorescent lights to dodge EMI interference.

Common pitfall avoided: Always match polarity on the pigtail—net-S, net-L, and shield are color-coded for foolproof wiring.

Elevate Your Vessel's Network Performance

Furuno's engineering shines in details like strain relief that outlasts cheap imports, ensuring your investment in nav gear pays off season after season. For vessels from day sailors to bluewater cruisers, this cable is the unsung hero tying it all together.

Frequently Asked Questions