Raymarine A7 Trunion Mount Kit
It will be shipped by UPS Ground.
- "Part Number"
- "Freight Program"
- "Qualifies for Ground and 2 Day"
- "Vendor Item Number"
Shipping (3PM)
Within 30 days
Raymarine A7 Trunion Mount Kit Product Description
Effortless Installation for Your Raymarine A7 Display
Setting up the trunnion mount kit for your Raymarine A7 transforms your boat's helm into a professional navigation station. This sturdy bracket secures the 7-inch A7 multifunction display with a smooth swivel action, letting you adjust the viewing angle on the fly whether you're battling choppy waves or scanning charts in calm waters. Unlike basic flush mounts, the trunnion design offers flexibility without compromising on stability, ideal for dynamic marine environments.
Start by gathering basic tools: a Phillips screwdriver, marine-grade sealant, and stainless steel fasteners to fight corrosion. Position the mount at eye level for optimal readability, typically 20-30 inches from your seated position. Secure the base to your console using the pre-drilled holes, applying sealant around screws to seal against saltwater intrusion. Snap the A7 display into the adjustable cradle, tighten the knobs for a rock-solid hold, and connect your cables through the rear grommets. The whole process takes under 30 minutes, even for DIY boaters.
- Choose a flat, reinforced mounting surface.
- Mark and drill holes precisely.
- Apply anti-seize compound to threads for easy future adjustments.
- Test swivel range before final torquing.
Robust Features Built for Marine Demands
Crafted from high-impact marine polymers and stainless steel hardware, this kit withstands harsh UV exposure, salt spray, and vibrations from rough seas. The ergonomic knobs allow one-handed adjustments, perfect for gloved hands during foul weather ops. Its low-profile design minimizes snag hazards on tight consoles, while the integrated cable management keeps wiring tidy and protected from chafe.
- Full 180-degree swivel and 30-degree tilt for versatile positioning.
- Corrosion-resistant materials ensure longevity in saltwater conditions.
- Quick-release mechanism for easy display removal during maintenance.
- Compatible with Raymarine A7 series, including CHIRP-enabled models.
Boaters rave about how this mount elevates situational awareness, letting you pivot the screen toward crew members for shared sonar readings or radar sweeps without leaving the wheel.
Why Upgrade to a Trunnion Mount for Better On-Water Performance
Picture this: you're trolling for trophy fish at dawn, and glare shifts with the sun. A quick twist of the trunnion knob repositions your A7's vivid HybridTouch display for glare-free viewing, revealing hidden structure on the sonar. Or during night runs, tilt it upward to reduce cockpit light spill. This isn't just a mount—it's an extension of your boating instincts.
Fishermen appreciate the stability during high-speed pursuits, while cruisers value the clean aesthetics on flybridge setups. It pairs seamlessly with other helm accessories, freeing up dash space for engine gauges or VHF radios. Long-term, it preserves your investment by reducing screen stress from fixed positions.
"Switched from a makeshift bracket—night and day difference in usability. Rock steady even at 40 knots." – Experienced offshore angler
Pro Tips for Long-Lasting Performance
Keep your setup pristine with seasonal checks: rinse with fresh water after saltwater exposure, lubricate pivot points with silicone grease, and inspect for hairline cracks. Avoid over-tightening knobs to prevent polymer fatigue. In storage, loosen all adjustments to relieve tension. These habits extend the mount's life beyond five years, even in brutal conditions like the Gulf Stream or Pacific swells.
Frequently Asked Questions
Is the Raymarine A7 trunnion mount kit compatible with all A7 models?
Yes, it fits standard A7 chartplotter/fishfinder units, including those with Lighthouse charts or sonar modules. Confirm your model's rear bracket pattern matches for a perfect fit.
How does the trunnion mount handle heavy vibrations from outboard motors?
Exceptionally well, thanks to reinforced knuckles and lockable tensioners that absorb engine pulses up to 6,000 RPM without loosening.
Can I mount this on a non-flat surface like a curved console?
It mounts best on flat areas, but with shims or custom adapters, it adapts to slight curves. Always reinforce the base for safety.
Does the kit include cables or power supplies?
No, it focuses on the mechanical mount. Use your existing A7 cables, routing them through the built-in strain reliefs.
What's the best way to clean the mount after a fishing trip?
Wipe with a microfiber cloth and mild soap solution. Avoid abrasives or high-pressure washers to protect the finish.
Can this mount be used upside down for overhead installations?
It's optimized for standard helm orientations, but creative boaters have flipped it successfully with reversed knobs for pod mounts.
"Raymarine \u00b7 Fish Finder \u00b7 ChartplotterModel RAYR70158Raymarine A7 Trunion Mount KitSpecifications - RAYR70158 - - RAYR70158BrandRaymarineUPC723193770474"
Buy with the best price Raymarine A7 Trunion Mount Kit for only $54 from NVN Marine! Same day shipping before 3pm.
Raymarine A7 Trunion Mount Kit Technical Specifications
| Type: | |
|---|---|
| Vendor: |
Raymarine |
| Weight: |
1.0 lb |
Raymarine A7 Trunion Mount Kit User Reviews
Raymarine A7 Trunion Mount Kit Shipping & Return
| Shipping Weight: |
1.0 lb |
|---|---|
| Box Sizes: |
1.00 (h) x 1.00 (w) x 1.00 (l) |
| Cubic Feet: |
1.0 |
| Returnable: |
Yes |
| USPS First Class: |
Yes |
| P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.