Newmar 2 Station Intercom System Black
It will be shipped by UPS Ground.
- "PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs."
- "Phone-Com Wiring: For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required."
- "Note: Phones are not waterproof and should be installed in a protected location."
Newmar 2 Station Intercom System Black Product Description
Enhance onboard communication with the reliable Newmar 2 Station Intercom System in sleek black. Perfect for boaters who need instant, crystal-clear voice contact between key areas like the helm and engine room, this wired system cuts through engine noise and distance without relying on radios or cell signals. Built tough for marine environments, it ensures your crew stays connected during tight maneuvers, maintenance checks, or emergencies.
Unlike wireless options prone to interference from saltwater spray or metal hulls, this point-to-point setup delivers dependable performance powered by your boat's 12 VDC system. Crafted from high-impact plastic with a traditional black finish, it blends seamlessly into any cabin or console while resisting everyday wear.
Key Features for Seamless Marine Communication
- Simple Operation: Lift the receiver and press the call button—hear a loud buzzer and see an illuminated indicator on the other station for immediate response.
- Two-Station Design: Ideal for smaller vessels needing direct links between bridge and below-deck areas, expandable mindset for future needs.
- Bulkhead Mounting: Includes sturdy brackets for secure installation on walls or panels, saving space in tight quarters.
- Complete Kit: Comes ready-to-install with 40 feet of interconnect wire, fuse, terminal lugs, and all hardware—no hunting for extras.
- Compact and Lightweight: At just 5 lbs total, it's easy to handle and position anywhere protected from direct water exposure.
Effortless Installation on Your Vessel
Setting up this intercom takes minimal tools and time, making it a weekend warrior's project. Run the included 5-conductor wire between stations, connect to your 12 VDC source via the fuse for safety, and secure with lugs. Mount on bulkheads away from splashes—think pilothouse walls or dry engine compartments. Pro tip: Label wires at both ends to speed future troubleshooting, and test in calm conditions before heading out.
For boats with metal superstructures, this wired system avoids signal dropouts common in VHF setups. It's straightforward enough for DIY, yet robust for professional installs on larger yachts.
Real-World Applications for Boaters
Imagine docking in choppy waters: One station at the helm signals the engine room instantly, no shouting over roar. Or during night watches, quick check-ins without leaving your post. Saltwater anglers use it between cockpit and cabin for bite alerts; cruisers link salon to flybridge for guest coordination. Its buzzer cuts through diesel hum, and the visual lamp works in low light—essential for safety-focused skippers.
Compared to shout-and-holler methods or finicky wireless units, this delivers privacy and clarity, fostering better team dynamics on multi-person trips.
Care and Longevity Tips
Keep it thriving by wiping down with a damp cloth after salty outings—avoid harsh chemicals. Store spares of fuses and wire for offshore adventures. Since it's not submersible, shield from spray with overhead covers or enclosures. Regular checks on connections prevent corrosion in humid bilges. With proper care, it outlasts seasonal gear, becoming a staple in your boating toolkit.
Frequently Asked Questions
What power source does the Newmar 2 Station Intercom System require?
It runs on standard 12 VDC boat power, drawing minimal current for reliable operation without draining batteries.
Is this intercom suitable for marine use on boats and yachts?
Yes, designed specifically for vessels, it provides wired communication resilient to marine conditions when installed in protected spots.
How many stations does the PI-2SET support?
It's a dedicated 2-station system for point-to-point calls, perfect for essential onboard links without complexity.
What type of wiring is needed for installation?
Use 5-conductor wire; 40 feet is included, suitable for runs between two points with easy polarity matching.
Are the stations waterproof?
No, they require protected installation away from direct water contact, like inside cabins or covered bulkheads.
What's included in the PI-2SET BLACK kit?
Two black stations, 40' wire, fuse, terminal lugs, mounting hardware, and brackets—everything for immediate setup.
Can I expand this to more stations later?
This model is for two stations; for more, consider multi-station versions like PI-10 with additional wiring.
The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available:
PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware.
PI-2 SET: Two station phone set, 40' interconnect wire, fuse, lugs, mounting hardware; 5 lbs.
PI-10:For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below.
Phone-Com Wiring: For PI-2, use 5 conductor wire. For PI-10, add 3 to the total number of stations to determine minimum number of conductors required.
Note: Phones are not waterproof and should be installed in a protected location
"The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic and are available in either bright white or traditional black. Bulkhead mounting bracket is provided. Two versions are available: PI-2: Designed for communication between only two points. A single call button sounds a buzzer and illuminates an indicator lamp on the companion phone. Available singly or as a set with 40' of interconnect wire, fuse, terminal lugs and mounting hardware. PI-10:For multiple station calling capability. Up to 10 phones may be interconnected, and each phone has 10 call buttons. Sold individually-- see wiring requirements below. Note: Phones are not waterproof and should be installed in a protected location"
Newmar 2 Station Intercom System Black Related Products
Newmar 2 Station Intercom System Bright WhiteFrequently Asked Questions (FAQ) About Newmar 2 Station Intercom System Black
Who is the NewMar?How to describe Newmar 2 Station Intercom System Black?
What is the highlights of Newmar 2 Station Intercom System Black?
Who is the NewMar?
How to describe Newmar 2 Station Intercom System Black?
What is the highlights of Newmar 2 Station Intercom System Black?
Buy with the best price Newmar 2 Station Intercom System Black for only $338 from NVN Marine! Same day shipping before 3pm.
Newmar 2 Station Intercom System Black Technical Specifications
| Type: | |
|---|---|
| Vendor: |
NewMar |
| Weight: |
5.0 lb |
Newmar 2 Station Intercom System Black User Reviews
Newmar 2 Station Intercom System Black Shipping & Return
| Shipping Weight: |
5.0 lb |
|---|---|
| Box Sizes: |
1.00 (h) x 1.00 (w) x 1.00 (l) |
| Cubic Feet: |
1.0 |
| Returnable: |
Yes |
| USPS First Class: |
Yes |
| P65: |
Yes |
For detailed shipping policy please check our Shipping Policy and you can find our Return and Refund Policy here.



