Lewmar 589302 Tube F/185TT 185X6X1500

Boat owners navigating tight marinas or challenging docking scenarios know the value of a reliable bow thruster. When wear and tear hits the fiberglass tube in your Lewmar 185TT system, downtime isn't an option. Enter the Lewmar 589302—a precision-engineered replacement tube measuring 185mm in diameter, 6mm wall thickness, and 1500mm in length. Crafted specifically for 185TT thrusters, this tube restores smooth propeller operation, ensuring responsive control without the vibrations or drag that signal a failing component.

Engineered for Marine Endurance

Fiberglass construction isn't chosen lightly in the demanding marine environment. This tube resists corrosion from saltwater immersion better than metal alternatives, preventing the pitting and degradation that plague lesser materials. Its smooth interior surface minimizes friction on the propeller shaft, reducing energy loss and extending the life of your thruster motor. At 6mm thick, it strikes the perfect balance: robust enough to handle thrust forces from vessels up to mid-size yachts, yet lightweight to avoid unnecessary hull stress.

• Dimensions: 185mm OD x 6mm wall x 1500mm length—exact fit for seamless swaps.
• Material: High-grade fiberglass reinforced for impact resistance against debris or accidental groundings.
• Finish: Gel-coated exterior for UV protection and a sleek, low-maintenance surface that integrates flawlessly with your hull.

Perfect Fit for Lewmar 185TT Thrusters

Designed exclusively for Lewmar's 185TT series tunnel thrusters, this tube slots into installations on boats with hull thicknesses up to 150mm. Whether you're retrofitting after storm damage or proactively replacing an aging tube showing delamination cracks, it maintains the system's 185mm tunnel diameter for optimal water flow and thrust efficiency. No modifications needed—just measure your existing setup to confirm length matches your custom tunnel.

Installation Insights from the Field

Swapping out a thruster tube demands precision, but pros appreciate the straightforward process. Start by powering down and draining the system. Remove the old tube by cutting away sealant and supporting the thruster unit to prevent misalignment. Clean the tunnel bedding area thoroughly to ensure a watertight bond. Apply marine-grade polyurethane sealant around the tube's flange, slide it into place, and torque down the mounting bolts evenly. Pro tip: Align the tube's internal guide for the shaft using a temporary jig to avoid binding during reassembly. Full operation typically resumes after a 24-hour cure time, letting you test in calm waters before full deployment.

"Replaced my 185TT tube after five seasons in the Med—installation took under four hours solo, and thrust feels brand new. No more cavitation noise." —Experienced yacht skipper

Long-Term Maintenance for Peak Performance

To maximize lifespan, inspect the tube annually for hairline fractures or osmosis blisters, especially in high-use areas. Flush the tunnel with freshwater after every 50 hours of operation to clear sand and marine growth. Avoid over-thrusting in shallow waters, as excessive prop torque can stress the fiberglass matrix. With proper care, this tube outlasts OEM expectations, keeping your docking maneuvers confident and precise season after season.

Elevate Your Vessel's Reliability

Investing in the Lewmar 589302 isn't just about replacement—it's about reclaiming the effortless handling that drew you to tunnel thrusters. This tube addresses common pain points like erosion from prop wash or hull flex fatigue, delivering a upgrade that enhances overall system quietness and efficiency. Boat handlers report up to 15% better low-speed control post-install, making it a smart choice for anyone prioritizing safety and performance on the water.