Furuno 555SLTD12 Stainless Steel 50/200KHZ 12DEG Tilt TH
It will be shipped by UPS Ground.
Available Stock : 2
Furuno 555SLTD12 Stainless Steel 50/200KHZ 12DEG Tilt TH PRODUCT DESCRIPTION
If a thru-hull flush-style 600W transducer is what you need, the Tilted Element 555T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 555T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both of these transducers compensate for deadrise by angling the element inside the housing.
The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
20/6 degree Beam Angles
Stainless Steel Thru Hull with Temperature
30 Foot Cable with 10-Pin Connector
Overview If you need a full-body flat-head 600w transducer, the tilting element 555t-ltd / 12 will adapt to the dead angle between 8 and 15, and the tilting element 555t-ltd / 20 is suitable for the hull angle with dead angle between 16 and 24 between. Both sensors compensate for blind spots by tilting the element into the housing. The transducer is marked with an arrow on the top of the housing. Whether it is installed on the port or starboard side, the arrow should point to the keel. This ensures that the tilting element in the housing has the correct orientation. 600 watts 50/200 khz 20/6 degree beam angle, stainless steel, through the hull, temperature 30 feet, cable, with 10-pin connector.
Save $145 when you buy the Furuno 555SLTD12 Stainless Steel 50/200KHZ 12DEG Tilt TH for only $654 from NVN Marine! Same day shipping before 3pm.