{"title":"Weld Mount","description":"The Weld Mount System is a unique line of fasteners designed to be adhesively bonded to almost any surface, elimintating the need for drilling, tapping or welding.  Weld Mount offers wire tie mounts, hose and cable clamps, studs, standoffs and floating nutplates.  All of Weld Mount fasteners are mounted with the unique non-sag acrylic adhesives which hold the parts in place on a vertical or overhead surface providing a permanent high strength bond.","products":[{"product_id":"59883-weld-mount-retail-wire-tie-kit-w-at-8040","title":"Weld Mount Retail Wire Tie Kit w\/AT-8040 Adhesive","description":"\u003cb\u003eRetail Wire Tie Kit\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCAN NOT SHIP AIR, UPS GROUND ONLY\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-1050 kit contains one manual mix tube of AT-8040 adhesive and 25 pc. AT-5 white wire tie mount.  Just enough parts for a small wiring job and ideal introduction to Weld Mount. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe AT-1050 Kit contains:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAT-8040 Adhesive\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e (25) Pieces AT-5 White Tie Mount\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e (1) Plastic Mixing Sheet\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e (2) Mixing Sticks\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Complete step-by-step instructions \u003cbr\u003e\u003cbr\u003eAT-5 white cable tie mounting seat. A small amount of wiring can be carried out with enough parts, which is an ideal introduction for Weld Mount. AT-1050 kit contains: 30ml test tube AT-1030 adhesive (25) AT-5...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48772\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 1050\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536372805725,"sku":"CWR-48772","price":33.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-retail-wire-1.jpg?v=1673080677"},{"product_id":"59886-weld-mount-at-2010-acrylic-adhesive","title":"Weld Mount AT-2010 Acrylic Adhesive","description":"\u003cb\u003eAcrylic Adhesive\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCAN NOT SHIP AIR,UPS GROUND ONLY\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging.  AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.\u003cbr\u003e\u003cbr\u003e** AT 850 Mixing Tips sku 56273 required ** \u003cbr\u003e\u003cbr\u003eAcrylic adhesive can't cheer up, UPS GROUND ONLYAT-2010 is our largest seller, and it is also a unique adhesive. It has high viscosity and can fix smaller parts without sagging. AT-2010 can cure...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48775\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 2010\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536372936797,"sku":"CWR-48775","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-2010-1.jpg?v=1673080683"},{"product_id":"59887-weld-mount-at-4020-acrylic-adhesive","title":"Weld Mount AT-4020 Acrylic Adhesive","description":"\u003cb\u003eAcrylic Adhesive\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCAN NOT SHIP AIR,UPS GROUND ONLY\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts. \u003cbr\u003e\u003cbr\u003eAcrylic adhesives can’t pump air. UPS GROUND ONLYAT-4020 is a specially formulated adhesive that is used to fix all our parts and hardly sags in vertical or overhead applications. Heal 10...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48776\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 4020\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536373624925,"sku":"CWR-48776","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-4020-1.jpg?v=1673080689"},{"product_id":"59888-weld-mount-at-6030-metal-bond-adhesive","title":"Weld Mount AT-6030 Metal Bond Adhesive","description":"\u003cb\u003eAcrylic Adhesive\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eCAN NOT SHIP AIR,UPS GROUND ONLY\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-6030 develops in excess of 2,500 lbs (psi) tensile strength on most metal surfaces making it an ideal alternative to welding in many applications. AT-6030 has a 6 month shelf life and should always be stored refrigerated. Packaged in a 38ml cartridge this adhesive must be used with our AT-301gun, AT-12 plunger and and AT-650 mixing tips. The 38ml cartridge will bond 80 - 120 parts. \u003cbr\u003e\u003cbr\u003eIt has a high viscosity, can be cured within 10-12 minutes, working time is 6 minutes, and working strength can be formed within 40 minutes. The developing power of AT-6030 exceeds 2500 pounds (psi)...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48777\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 6030\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536373690461,"sku":"48777","price":29.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-6030-1.jpg?v=1673080694"},{"product_id":"59890-weld-mount-at-300-adhesive-dispensing-gun-f-at-2010","title":"Weld Mount AT-300 Adhesive Dispensing Gun f\/AT-2010 \u0026 AT-4020","description":"\u003cb\u003eAdhesive Dispensing Gun\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available. \u003cbr\u003e\u003cbr\u003eWelding Installation System 80300 Adhesive and Sealant Adhesive Dispensing Gun AT-300 Adhesive Dispensing Gun has a 1:1 plunger and can be used with AT-2010 and AT-4020 50ml cartridges. When ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48779\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 80300\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536373723229,"sku":"CWR-48779","price":60.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-300-1.jpg?v=1673080697"},{"product_id":"59891-weld-mount-manual-dual-pusher-rod-f-at-2010","title":"\\Weld Mount Manual Dual Pusher Rod f\/AT-2010 \u0026 AT-4020 - Qty. 10","description":"\u003cb\u003eDual Pusher Rod\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-500 dual pusher rod is used to dispense equal amounts of our AT-2010 or AT-4020 adhesive for manual mixing.  This dual pusher rod can not be used with our AT-300 or AT-350 mixing tips as it does not generate enough force to push the adhesives through the tip. \u003cbr\u003e\u003cbr\u003eDouble push rod AT-500 double push rod is used to dispense the same amount of AT-2010 or AT-4020 adhesive for manual mixing. This double putter can't...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48780\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805002\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536373788765,"sku":"48780","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-manual-dual-1.jpg?v=1673080703"},{"product_id":"59894-weld-mount-square-mixing-tips-f-at-6030-at-2010-at-4020","title":"Weld Mount Square Mixing Tips f\/AT-6030,AT-2010,\u0026 AT-4020","description":"\u003cb\u003eAdhesive Mixing Tip For AT-6030\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6\" mixing tips. pkg contains 50 mixing tips.  \u003cbr\u003e\u003cbr\u003eSuitable for AT-6030, AT-2010 and AT-4020 Welding Block Square Mixing Tips Suitable for AT-6030 Adhesive Mixing Head Our AT-650 Mixing Head is specially designed for use with our AT-6030 adhesive . In-...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48783\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 8065050\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536374378589,"sku":"48783","price":59.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-square-mixing-1.jpg?v=1673080709"},{"product_id":"59898-weld-mount-mixing-tips-f-use-w-at-6030-at-2010","title":"Weld Mount Mixing Tips f\/Use w\/AT-6030,AT-2010, \u0026amp; AT-4020","description":"\u003cb\u003eAdhesive Mixing Tip For AT-6030\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6\" mixing tips. pkg contains 10 mixing tips.   \u003cbr\u003e\u003cbr\u003eAdhesive mixing tip for AT-6030 Our AT-650 hybrid adhesive is specifically designed to be used with our AT-6030 adhesive. AT-6030 is a 10:1 adhesive. It needs a mixing head and comes with...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48787\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 80650\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536374411357,"sku":"48787","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-mixing-tips-1.jpg?v=1673080712"},{"product_id":"59899-weld-mount-at-5-large-white-nylon-wire","title":"Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 30","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs! \u003cbr\u003e\u003cbr\u003eWelding installation AT-5 LRGE white cable tie quantity 30 white nylon cable tie mounting bracket AT-5 cable tie mounting bracket is designed to be placed in wet resin during the laying of the hull, or bonded with our acrylic resin.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48788\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536374509661,"sku":"48788","price":13.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5-1.jpg?v=1673080720"},{"product_id":"59900-weld-mount-at-5b-large-black-nylon-wire","title":"Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 30","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs! \u003cbr\u003e\u003cbr\u003e805B cable tie and package welding system black nylon cable tie installation AT-5 cable tie is designed to be placed in a wet resin during the laying of the hull or bonded with our acrylic adhesive...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48789\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536374575197,"sku":"48789","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5b-1.jpg?v=1673080726"},{"product_id":"59901-weld-mount-at-3-small-white-nylon-wire","title":"Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 30","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. \u003cbr\u003e\u003cbr\u003e30 White Nylon Cable Tie Mounting Frame AT-3 Cable Tie Mounting Frame is small, suitable for panel and other small space applications. This part is molded in white nylon, the size is suitable for #3 cable tie, and has a metal wire.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48790\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375001181,"sku":"48790","price":11.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3-1.jpg?v=1673080732"},{"product_id":"59902-weld-mount-at-3b-small-black-nylon-wire","title":"Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 30","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. \u003cbr\u003e\u003cbr\u003eWelding installation system 803B cable tie and wrapped black nylon cable tie mounting seat AT-3 cable tie mounting seat is small, suitable for panel and other small space applications. This part is molded from black nylon and is made of nylon.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48791\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 013027084274\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375033949,"sku":"48791","price":11.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3b-1.jpg?v=1673080735"},{"product_id":"59903-weld-mount-at-5-large-white-nylon-wire","title":"Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs! \u003cbr\u003e\u003cbr\u003eWelding installation system 805950 cable tie and wrapped white nylon wire cable tie mount AT-5 cable tie mount is designed to be placed in wet resin or bonded with our acrylic resin during the laying process of the hull.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48792\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805950\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375099485,"sku":"CWR-48792","price":28.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5-1_af08a82b-c5d1-4eb5-8a67-77a80018d051.jpg?v=1673080741"},{"product_id":"59904-weld-mount-at-5-large-white-nylon-wire","title":"Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs! \u003cbr\u003e\u003cbr\u003eThe white nylon cable tie holder AT-5 cable tie holder is designed to be placed in wet resin during the laying of the hull, or bonded with our acrylic adhesive. Designed for\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48793\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805900\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375230557,"sku":"CWR-48793","price":55.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5-1_2fe98cd3-e780-4512-a938-4ec6af8369d0.jpg?v=1673080744"},{"product_id":"59905-weld-mount-at-5b-large-black-nylon-wire","title":"Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!  \u003cbr\u003e\u003cbr\u003e50 black nylon cable tie holder AT-5 cable tie holder is designed to be placed in wet resin during the laying of the hull, or bonded with our acrylic adhesive. It is specially designed for #5 wire...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48794\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805950B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375296093,"sku":"CWR-48794","price":26.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5b-1_2555486c-6aae-48b6-a1ff-8084138b16d0.jpg?v=1673080750"},{"product_id":"59906-weld-mount-at-5b-large-black-nylon-wire","title":"Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 100","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!  \u003cbr\u003e\u003cbr\u003eThe black nylon cable tie holder AT-5 cable tie holder is designed to be placed in wet resin or bonded with our acrylic adhesive during the laying process of the hull. Designed for\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48795\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 805900B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375492701,"sku":"CWR-48795","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-5b-1_3bbe9b1a-6b53-4145-a0d7-f9fa37ee9a31.jpg?v=1673080756"},{"product_id":"59907-weld-mount-at-3-small-white-nylon-wire","title":"Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 50","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. \u003cbr\u003e\u003cbr\u003eWelding installation system 803950 cable tie and wrapped white nylon cable tie mounting frame AT-3 cable tie mounting frame is small, suitable for panels and other small space applications. This part is molded from white nylon.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48796\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803950\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375623773,"sku":"CWR-48796","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3-1_b60b375c-e004-4f72-8d7a-2191ae955c95.jpg?v=1673080763"},{"product_id":"59908-weld-mount-at-3-small-white-nylon-wire","title":"Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 100","description":"\u003cb\u003eWhite Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eWhite nylon cable tie mounting seat AT-3 cable tie mounting seat is small, suitable for panel and other small space applications. The part is molded in white nylon, size #3...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48797\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803900\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375689309,"sku":"CWR-48797","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3-1_0a7ccd70-8df1-4a20-819c-a6f2a70d60b3.jpg?v=1673080769"},{"product_id":"59909-weld-mount-at-3b-small-black-nylon-wire","title":"Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 50","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. \u003cbr\u003e\u003cbr\u003eOriginal equipment design. Made of durable materials with long service life. The stainless steel components are carefully designed and have stable performance.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48798\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803950B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 999553137908\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375787613,"sku":"CWR-48798","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3b-1_bed0d2c4-1e78-4781-87ba-578ead3edf23.jpg?v=1673080775"},{"product_id":"59910-weld-mount-at-3b-small-black-nylon-wire","title":"Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100","description":"\u003cb\u003eBlack Nylon Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20\". Average pull strength is about 50 lbs. The square base measures .44\" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. \u003cbr\u003e\u003cbr\u003eWelding installation system 803900B universal tool black nylon cable tie mounting seat AT-3 cable tie mounting seat is small, suitable for panels and other small space applications. This part is molded from black nylon.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48799\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 803900B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 999559156996\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536375918685,"sku":"CWR-48799","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-3b-1_57852a18-112c-44cb-8939-915289f0f866.jpg?v=1673080781"},{"product_id":"59912-weld-mount-at-113-large-white-footman-s-strap","title":"Weld Mount AT-113 Large White Footman's Strap - Qty. 6","description":"\u003cb\u003eFootman's Strap Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive.  This strap mount is 3.25\" long and 1\" wide and holds up to a 1.3\" max strap width.  This strap is incredibly strong, paintable, and is rated for over 600 lbs. strength.  Use it for battery and tank tie downs and mounting heavy hoses and cables or deck mounted for life raft tie downs. \u003cbr\u003e\u003cbr\u003eWelding installation system 80113 cable tie and packaging foot strap fixing device Footman's belt fixing device is designed to bond with AT-4020 acrylic adhesive. The strap mount is 3.25 inches long and 1 inch long...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48801\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 80113\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536376049757,"sku":"CWR-48801","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-113-1.jpg?v=1673080789"},{"product_id":"59913-weld-mount-at-113b-large-black-footman-s-strap","title":"Weld Mount AT-113B Large Black Footman's Strap - Qty. 6","description":"\u003cb\u003eFootman's Strap Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive.  This strap mount is 3.25\" long and 1\" wide and holds up to a 1.3\" max strap width.  This strap is incredibly strong, paintable, and is rated for over 600 lbs. strength.  Use it for battery and tank tie downs and mounting heavy hoses and cables or deck mounted for life raft tie downs. \u003cbr\u003e\u003cbr\u003eWelding installation system 80113B cable ties and package with instep strap fixing device Instep strap fixing device is designed to bond with AT-4020 acrylic adhesive. The strap holder is 3.25 inches long and 1 inch long.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48802\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 80113B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536376148061,"sku":"CWR-48802","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-113b-1.jpg?v=1673080796"},{"product_id":"59914-weld-mount-75-tall-stainless-panel-stud","title":"Weld Mount .75\u0026quot; Tall Stainless Panel Stud w\/0.62\u0026quot; Base \u0026 #8 x 32 Thread - Qty. 15","description":"\u003cb\u003e.75\" Tall Stainless Stud w\/#8 x 32 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur Small Stainless Steel Panel Studs have a wide range of uses.  Originally they were used for mounting on the backside of dash panels for mounting to the console.  Now they are used for securing a wide range of wire clamps and other small components to composite surfaces.  The base plate is 0.62\" in diameter with a .75\" tall stud.  Tensile strength is 300 lbs. and shear strength is 375 lbs.  Maximum torque load is 45 inch\/lbs.   \u003cbr\u003e\u003cbr\u003e.75\" high stainless steel studs with #8 x 32 threads. Our small stainless steel panel studs are versatile. Initially they were used to mount on the back of...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48803\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 83212\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536376410205,"sku":"CWR-48803","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-75-tall-1.jpg?v=1673080802"},{"product_id":"59915-weld-mount-1-tall-stainless-panel-stud","title":"Weld Mount 1\u0026quot; Tall Stainless Panel Stud w\/0.62\u0026quot; Base \u0026 #8 x 32 Thread - Qty. 15","description":"\u003cb\u003e1\" Tall Stainless Stud w\/#8 x 32 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur Small Stainless Steel Panel Studs have a wide range of uses.  Originally they were used for mounting on the backside of dash panels for mounting to the console.  Now they are used for securing a wide range of wire clamps and other small components to composite surfaces.  The base plate is 0.62\" in diameter with a 1\" tall stud.  Tensile strength is 300 lbs. and shear strength is 375 lbs.  Maximum torque load is 45 inch\/lbs.   \u003cbr\u003e\u003cbr\u003e1 inch high stainless steel studs with #8 x 32 threads. Our small stainless steel panel studs are versatile. Initially, they were used to install on the back of...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48804\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 83216\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536376574045,"sku":"CWR-48804","price":25.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-tall-1.jpg?v=1673080811"},{"product_id":"59916-weld-mount-1-25-tall-stainless-panel-stud","title":"Weld Mount 1.25\u0026quot; Tall Stainless Panel Stud w\/0.62\u0026quot; Base \u0026 #8 x 32 Thread - Qty. 15","description":"\u003cb\u003e1.25\" Tall Stainless Stud w\/#8 x 32 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur Small Stainless Steel Panel Studs have a wide range of uses.  Originally they were used for mounting on the backside of dash panels for mounting to the console.  Now they are used for securing a wide range of wire clamps and other small components to composite surfaces.  The base plate is 0.62\" in diameter with a 1.25\" tall stud.  Tensile strength is 300 lbs. and shear strength is 375 lbs.  Maximum torque load is 45 inch\/lbs.   \u003cbr\u003e\u003cbr\u003e1.25 inch high stainless steel studs with #8 x 32 threads. Our small stainless steel panel studs have a wide range of uses. Initially, they were used to install in...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48805\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 83220\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536376672349,"sku":"CWR-48805","price":28.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-25-1.jpg?v=1673080821"},{"product_id":"59917-weld-mount-1-5-tall-stainless-panel-stud","title":"Weld Mount 1.5\u0026quot; Tall Stainless Panel Stud w\/0.62\u0026quot; Base \u0026 #8 x 32 Threads - Qty. 15","description":"\u003cb\u003e1.5\" Tall Stainless Stud w\/#8 x 32 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur Small Stainless Steel Panel Studs have a wide range of uses.  Originally they were used for mounting on the backside of dash panels for mounting to the console.  Now they are used for securing a wide range of wire clamps and other small components to composite surfaces.  The base plate is 0.62\" in diameter with a 1.5\" tall stud.  Tensile strength is 300 lbs. and shear strength is 375 lbs.  Maximum torque load is 45 inch\/lbs.   \u003cbr\u003e\u003cbr\u003eWelded mounting system 83224 studs 1.5\" high stainless steel studs with #8 x 32 threads. Our small stainless steel panel studs are versatile. Originally used for installation in...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48806\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 83224\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377196637,"sku":"CWR-48806","price":29.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-5-1.jpg?v=1673080830"},{"product_id":"59919-weld-mount-1-25-tall-stainless-stud-w-10","title":"Weld Mount 1.25\u0026quot; Tall Stainless Stud w\/#10 x 24 Threads - Qty. 10","description":"\u003cb\u003e1.25\" Tall Stainless Stud w\/#10 x 24 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUtilize the same base as the 1.4\" x 20 studs but with a smaller threaded stud inserted into the base.  These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter.  These studs can be bonded from either surface of the base plate. \u003cbr\u003e\u003cbr\u003eWelding mounting system 102420 studs 1.25\" high stainless steel studs with #10 x 24 threads use the same base as the 1.4\" x 20 studs, but insert the smaller threaded studs into the base. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48808\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 102420\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377229405,"sku":"48808","price":25.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-25-1_6ec48dbe-0782-4dcf-956f-2f7eeb2a44a1.jpg?v=1673080835"},{"product_id":"59920-weld-mount-1-5-tall-stainless-steel-stud","title":"Weld Mount 1.5\u0026quot; Tall Stainless Steel Stud w\/#10 x 24 Threads - Qty. 10","description":"\u003cb\u003e1.5\" Tall Stainless Stud w\/#10 x 24 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUtilize the same base as the 1.4\" x 20 studs but with a smaller threaded stud inserted into the base.  These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter.  These studs can be bonded from either surface of the base plate. \u003cbr\u003e\u003cbr\u003eAge group under 10 years: adults.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48809\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 102424\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 523402062815\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377294941,"sku":"CWR-48809","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-5-1_d8a9c1eb-649f-4338-b8ff-afc4b87bc755.jpg?v=1673080842"},{"product_id":"59921-weld-mount-2-25-tall-stainless-stud-w-10","title":"Weld Mount 2.25\u0026quot; Tall Stainless Stud w\/#10 x 24 Threads - Qty. 10","description":"\u003cb\u003e2.25\" Tall Stainless Stud w\/#10 x 24 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUtilize the same base as the 1.4\" x 20 studs but with a smaller threaded stud inserted into the base.  These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter.  These studs can be bonded from either surface of the base plate. \u003cbr\u003e\u003cbr\u003eIt has a high viscosity and can be cured within 10-12 minutes, working time is 6 minutes, and working strength can be formed within 40 minutes. The developing power of AT-6030 exceeds 2500 pounds (psi)...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48810\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 102436\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 760969881064\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377393245,"sku":"48810","price":42.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-2-25-1.jpg?v=1673080849"},{"product_id":"59923-weld-mount-1-tall-stainless-stud-w-1-4","title":"Weld Mount 1\u0026quot; Tall Stainless Stud w\/1\/4\u0026quot; x 20 Threads - Qty. 10","description":"\u003cb\u003e1\" Tall Stainless Stud w\/1\/4\" x 20 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMounts to virtually any surface using the AT-4010 Acrylic Adhesive.  This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear.  All studs have 1\/4\" x 20 threads.  Use for hanging panels, through deck mounts and many other uses. \u003cbr\u003e\u003cbr\u003eWelding mounting system 142016 Stud 1\" high stainless steel stud with \/ 1\/4\" x 20 thread, can be fixed on almost any surface with AT-4010 acrylic adhesive. This is the structural part of 500...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48812\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 142016\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 650361940004\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377491549,"sku":"CWR-48812","price":31.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-tall-1_0f454d92-700e-4440-8a68-2b0c4701f2ad.jpg?v=1673080858"},{"product_id":"59924-weld-mount-1-5-tall-stainless-stud-w-1-4","title":"Weld Mount 1.5\u0026quot; Tall Stainless Stud w\/1\/4\u0026quot; x 20 Threads - Qty. 10","description":"\u003cb\u003e1.5\" Tall Stainless Stud w\/1\/4\" x 20 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMounts to virtually any surface using the AT-4010 Acrylic Adhesive.  This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear.  All studs have 1\/4\" x 20 threads.  Use for hanging panels, through deck mounts and many other uses. \u003cbr\u003e\u003cbr\u003e1.5 inch high stainless steel bolts with 1\/4 inch x 20 threads, using AT-4010 acrylic adhesive can be fixed on almost any surface. This is a 500-pound structural part. Tensile strength and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48813\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 142024\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 013167741907\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377557085,"sku":"CWR-48813","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-5-1_cdfd671d-f11e-4145-86d0-71e00e471bc4.jpg?v=1673080865"},{"product_id":"59925-weld-mount-1-75-tall-stainless-stud-w-1-4","title":"Weld Mount 1.75\u0026quot; Tall Stainless Stud w\/1\/4\u0026quot; x 20 Thread - Qty. 10","description":"\u003cp\u003e\u003cstrong\u003e1.75\" Tall Stainless Stud with 1\/4\" x 20 Thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1\/4\" x 20 threads. Use for hanging panels, through deck mounts and many other uses.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eUsing AT-4010 acrylic adhesive, 1.75\" high stainless steel studs with 1\/4\" x 20 threads can be fixed on almost any surface. This is a 500-pound structural part. Tensile strength and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48814\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 142028\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377655389,"sku":"48814","price":40.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-75-1.jpg?v=1673080874"},{"product_id":"59926-weld-mount-2-tall-stainless-stud-w-1-4","title":"Weld Mount 2\u0026quot; Tall Stainless Stud w\/1\/4\u0026quot; x 20 Threads - Qty. 10","description":"\u003cb\u003e2\" Tall Stainless Stud w\/1\/4\" x 20 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMounts to virtually any surface using the AT-4010 Acrylic Adhesive.  This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear.  All studs have 1\/4\" x 20 threads.  Use for hanging panels, through deck mounts and many other uses. \u003cbr\u003e\u003cbr\u003eWelding mounting system 142424 studs 1.5\" high stainless steel studs with 1\/4\" x 20 threads, which can be fixed on almost any surface using AT-4010 acrylic adhesive. This is a part with 500 structures...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48815\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 142032\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536377884765,"sku":"CWR-48815","price":47.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-2-tall-1.jpg?v=1673080885"},{"product_id":"59927-weld-mount-2-5-tall-stainless-stud-w-1-4","title":"Weld Mount 2.5\u0026quot; Tall Stainless Stud w\/1\/4\u0026quot; x 20 Threads - Qty.10","description":"\u003cb\u003e2.5\" Tall Stainless Stud w\/1\/4\" x 20 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMounts to virtually any surface using the AT-4010 Acrylic Adhesive.  This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear.  All studs have 1\/4\" x 20 threads.  Use for hanging panels, through deck mounts and many other uses. \u003cbr\u003e\u003cbr\u003e2.5 inch high stainless steel bolts with 1\/4 inch x 20 threads, using AT-4010 acrylic adhesive can be fixed on almost any surface. This is a 500-pound structural part. Tensile strength and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48816\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 142040\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 014445393139\u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536378441821,"sku":"CWR-48816","price":52.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-2-5-1.jpg?v=1673080888"},{"product_id":"59928-weld-mount-2-tall-stainless-stud-w-3-8","title":"Weld Mount 2\u0026quot; Tall Stainless Stud w\/3\/8\u0026quot; x 16 Threads - Qty. 5","description":"\u003cb\u003e2\" Tall Stainless Stud w\/3\/8\" x 16 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe HS200 stud is designed for heavy load applications such as mounting filters and panels.  Thestud is inertial (friction) welded to a 2\" base plate creating a very strong part.  Manufactured of 304 stainless steel.  Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs. \u003cbr\u003e\u003cbr\u003eWelded mounting system 3816325 studs 2\" high stainless steel studs with 3\/8\" x 16 threads HS200 studs are designed for heavy-duty applications, such as mounting filters and panels. Stud is...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48817\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 3816325\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379064413,"sku":"48817","price":57.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-2-tall-1_6ab0fec8-45a9-45db-a4cb-15d3a7493547.jpg?v=1673080899"},{"product_id":"59929-weld-mount-1-5-tall-stainless-stud-w-5-16","title":"Weld Mount 1.5\u0026quot; Tall Stainless Stud w\/5\/16\u0026quot; x 18 Threads - Qty. 5","description":"\u003cb\u003e1.5\" Tall Stainless Stud w\/5\/16\" x 18 Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe HS200 stud is designed for heavy load applications such as mounting filters and panels.  Thestud is inertial (friction) welded to a 2\" base plate creating a very strong part.  Manufactured of 304 stainless steel.  Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs. \u003cbr\u003e\u003cbr\u003eWelded mounting system 51618245 studs 1.5\" high stainless steel studs with 5\/16\" x 18 threads HS200 studs are designed for heavy-duty applications, such as mounting filters and panels. Stud...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48818\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 51618245\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379195485,"sku":"48818","price":50.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-1-5-1_847f7aa0-b295-4ac0-8ffb-e699c3017e9d.jpg?v=1673080906"},{"product_id":"59931-weld-mount-75-tall-stainless-standoff-through","title":"Weld Mount .75\u0026quot; Tall Stainless Standoff Through Thread w\/5\/16\u0026quot; x 8 Threads - Qty. 6","description":"\u003cb\u003e.75\" Tall Stainless Standoff w\/5\/16\" x 8 Threads - Through-Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff.  This allows the standoff to be mounted from either side of the base.  These parts are manufactured in 316 stainless steel making them suitable for deck applications.  This standoff is inertial (friction) welded to the base yielding a very strong part.  The bases are all 1.25\" in diameter.  Use for through deck mounting of hardware or anywhere you need a fixed female thread. \u003cbr\u003e\u003cbr\u003e.75\" high stainless steel support with \/ 5\/16\" x 8 thread-through thread is different from SOB support with blind hole thread, SOT series support has thread that penetrates all threads...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48820\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 51618122\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379293789,"sku":"48820","price":51.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-75-tall-1_f630f0df-844b-4145-bfd4-331375e06a87.jpg?v=1673080914"},{"product_id":"59933-weld-mount-75-tall-stainless-standoff-through","title":"Weld Mount .75\u0026quot; Tall Stainless Standoff Through Thread w\/#10 x 24 Threads - Qty. 6","description":"\u003cb\u003e.75\" Tall Stainless Standoff w\/#10 x 24 Threads - Through-Thread\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff.  This allows the standoff to be mounted from either side of the base.  These parts are manufactured in 316 stainless steel making them suitable for deck applications.  This standoff is inertial (friction) welded to the base yielding a very strong part.  The bases are all 1.25\" in diameter.  Use for through deck mounting of hardware or anywhere you need a fixed female thread. \u003cbr\u003e\u003cbr\u003e.75 inch high stainless steel bracket with #10 x 24 thread-straight thread is different from SOB bracket with blind thread, SOT series bracket has thread that runs all the time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48822\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 1024122\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379392093,"sku":"48822","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-75-tall-1_8d83c69d-fb64-4224-ac06-1a68e043221b.jpg?v=1673080925"},{"product_id":"59934-weld-mount-at-7-aluminum-base-swivel-tie","title":"Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25","description":"\u003cb\u003eAluminum Base Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength of 150 lbs.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eWelding installation system 80725 cable ties and strapping aluminum base wire tie installation The cable tie is installed with an anodized aluminum base and has a nylon cable tie riveted on the base. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48823\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 80725\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379457629,"sku":"CWR-48823","price":59.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-7-1.jpg?v=1673080931"},{"product_id":"59935-weld-mount-at-7-aluminum-base-swivel-tie","title":"Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 100","description":"\u003cb\u003eAluminum Base Wire Tie Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength of 150 lbs. \u003cbr\u003e\u003cbr\u003eAluminum-based wire tie mounting base This tie mounting base has an anodized aluminum base and a nylon tie seat riveted to the base. The nylon mount can rotate 360...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48824\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 807100\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536379850845,"sku":"CWR-48824","price":118.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-7-1_64fe87a0-a3dd-4c79-9c1e-2d7615270a7a.jpg?v=1673080939"},{"product_id":"59936-weld-mount-at-9-aluminum-wire-tie-mount","title":"Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 25","description":"\u003cb\u003eAluminum Wire Tie\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eWelding installation system 809025 universal tool aluminum cable tie is used in conjunction with stainless steel or nylon cable tie, the maximum width is 0.4 inches. The tensile strength when bonded to AT-6030 is 250 lbs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48825\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 809025\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536380833885,"sku":"CWR-48825","price":30.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-9-1.jpg?v=1673080949"},{"product_id":"59937-weld-mount-at-9-aluminum-wire-tie-mount","title":"Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 100","description":"\u003cb\u003eAluminum Wire Tie\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc. \u003cbr\u003e\u003cbr\u003eAluminum wire ties are used in conjunction with stainless steel or nylon ties no more than 0.4 inches wide. When bonded with AT-6030 adhesive made of 5052 marine aluminum, the tensile strength is 250 pounds.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48826\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 809100\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381259869,"sku":"CWR-48826","price":57.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-at-9-1_344e618e-eab3-4eca-ba97-c80578295a69.jpg?v=1673080961"},{"product_id":"59938-weld-mount-stainless-nut-plate-w-10-x","title":"Weld Mount Stainless Nut Plate w\/#10 x 24 Threads - Qty. 10","description":"\u003cb\u003eFloating Nut Plates\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The threaded nut floats allowing accurate bolt alignment. Use for all types of mounting applications. \u003cbr\u003e\u003cbr\u003eNGK ignition coils are manufactured to meet or exceed OE standards and have the highest durability and operational performance, so they can be installed with confidence. NGK and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48827\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 901024\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381325405,"sku":"CWR-48827","price":66.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-stainless-nut-1.jpg?v=1673080970"},{"product_id":"59939-weld-mount-stainless-nut-plate-w-1-4-x","title":"Weld Mount Stainless Nut Plate w\/1\/4\u0026quot; x 20 Threads - Qty. 10","description":"\u003cb\u003eFloating Nut Plates\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur floating nut plate is designed for through-hole mounting applications. The rubber fixture holds the part in the through hole while it is bonded in place with our acrylic adhesive. The fixture keeps the threads clean during bonding. Remove the rubber fixture when you are ready to make up the assembly. The threaded nut floats allowing accurate bolt alignment. Use for all types of mounting applications. \u003cbr\u003e\u003cbr\u003eFloating nut plates Our floating nut plates are designed for through-hole mounting applications. Rubber clamps fix the parts in the through holes, and then use our accessories to fix them in place.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48828\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 901420\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381620317,"sku":"CWR-48828","price":72.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-stainless-nut-1_8bc1951d-65f2-4043-9355-c35884183433.jpg?v=1673080977"},{"product_id":"59940-weld-mount-white-nylon-1-25-stud-cover","title":"Weld Mount White Nylon 1.25\u0026quot; Stud Cover f\/1\/4\u0026quot; x 20 Stud - Qty. 50","description":"\u003cb\u003eStud Covers\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eFor applications such as engine rooms where our stainless steel studs may be visible,  use these press-on white nylon caps to improve the appearance of the installation.  The caps are \"Matterhorn White\".  Install the caps before bonding up the studs.  1.25\" Diameter.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eIt has high viscosity, can be cured within 10-12 minutes, working time is 6 minutes, and working strength can be formed within 40 minutes. The developing power of AT-6030 exceeds 2500 pounds (psi)...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48829\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 50142050\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381718621,"sku":"48829","price":30.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-white-nylon-1.jpg?v=1673080986"},{"product_id":"59942-weld-mount-single-poly-clamp-f-1-4-x","title":"Weld Mount Single Poly Clamp f\/1\/4\u0026quot; x 20 Studs - 1\/4\u0026quot; OD - Requires 0.75\u0026quot; Stud - Qty. 25","description":"\u003cb\u003eSingle Clamp\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eEach clamp is designed to be mounted using 1\/4\" x 20 Weld Mount studs.  The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Hose OD: 0.250\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Stud Required: ST125-1420-12SS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Clamp Dimensions L\/W\/D: 0.87\" x 0.47\" x 0.41\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Recommended Clamp Spacing: 3' \u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSingle clamps. Each clamp is designed to be installed using 1\/4 inch x 20 welded mounting studs. These clamps are made of black polypropylene and are rated at -22 to 20°C.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48831\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 60250\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381849693,"sku":"48831","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-single-poly-1.jpg?v=1673080994"},{"product_id":"59943-weld-mount-single-poly-clamp-f-1-4-x","title":"Weld Mount Single Poly Clamp f\/1\/4\u0026quot; x 20 Studs - 3\/8\u0026quot; OD - Requires 1\u0026quot; Stud - Qty. 25","description":"\u003cb\u003eSingle Clamp\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eEach clamp is designed to be mounted using 1\/4\" x 20 Weld Mount studs.  The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Hose OD: 0.375\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Stud Required: ST125-1420-16SS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Clamp Dimensions L\/W\/D: 1.06\" x 0.63\" x 0.56\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Recommended Clamp Spacing: 3' \u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSingle clamps. Each clamp is designed to be installed using 1\/4 inch x 20 welded mounting studs. These clamps are made of black polypropylene and are rated for a temperature range of -22 to...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48832\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 60375\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536381947997,"sku":"48832","price":21.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-single-poly-1_d8881c35-2a45-4465-9679-11771e967e1f.jpg?v=1673081002"},{"product_id":"59944-weld-mount-single-poly-clamp-f-1-4-x","title":"Weld Mount Single Poly Clamp f\/1\/4\u0026quot; x 20 Studs - 1\/2\u0026quot; OD - Requires 1.5\u0026quot; Stud - Qty. 25","description":"\u003cb\u003eSingle Clamp\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eEach clamp is designed to be mounted using 1\/4\" x 20 Weld Mount studs.  The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Hose OD: 0.5\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Stud Required: ST125-1420-24SS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Clamp Dimensions L\/W\/D: 1.39\" x 0.79\" x 0.89\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Recommended Clamp Spacing: 4' \u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eSingle clamps. Each clamp is designed to be installed using 1\/4 inch x 20 welded mounting studs. These clamps are made of black polypropylene and are rated for a temperature range of -22 to...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48833\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 60500\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536382013533,"sku":"CWR-48833","price":33.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-single-poly-1_5d75aadf-848a-4bc9-8d7c-1c53ed666b57.jpg?v=1673081011"},{"product_id":"59945-weld-mount-single-poly-clamp-f-1-4-x","title":"Weld Mount Single Poly Clamp f\/1\/4\u0026quot; x 20 Studs - 5\/8\u0026quot; OD - Requires 1.5\u0026quot; Stud - Qty. 25","description":"\u003cb\u003eSingle Clamp\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eEach clamp is designed to be mounted using 1\/4\" x 20 Weld Mount studs.  The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Hose OD: 0.625\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Stud Required: ST125-1420-24SS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Clamp Dimensions L\/W\/D: 1.39\" x 0.79\" x 0.89\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Recommended Clamp Spacing: 4' \u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eIndividual clamps. Each clamp is designed to be installed using 1\/4 inch x 20 welded mounting studs. The clamp is made of black polypropylene and has a rated temperature range of -22 to 20°C.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48834\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 60625\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536382079069,"sku":"CWR-48834","price":37.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-single-poly-1_8bfc20e5-fb3d-42cf-a732-c77b17813ddb.jpg?v=1673081016"},{"product_id":"59946-weld-mount-single-poly-clamp-f-1-4-x","title":"Weld Mount Single Poly Clamp f\/1\/4\u0026quot; x 20 Studs - 3\/4\u0026quot; OD - Requires 1.75\u0026quot; Stud - Qty. 25","description":"\u003cb\u003eSingle Clamp\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eEach clamp is designed to be mounted using 1\/4\" x 20 Weld Mount studs.  The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Hose OD: 0.75\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Stud Required: ST125-1420-28SS\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Clamp Dimensions L\/W\/D: 1.65\" x 0.79\" x 1.18\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Recommended Clamp Spacing: 4' \u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eIndividual clamps. Each clamp is designed to be installed using 1\/4 inch x 20 welded mounting studs. The clamp is made of black polypropylene and has a rated temperature range of -22 to 20°C.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48835\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 60750\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Weld Mount","offers":[{"title":"Default Title","offer_id":32536383127645,"sku":"CWR-48835","price":44.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/weld-mount-single-poly-1_1ae6a8f7-76b4-40bf-9131-f3f853af75c0.jpg?v=1673081025"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/collections\/b2483be069a2b71facced2be6b62736f_9ee39ba9-52ae-4102-b87e-5b19c590f03c.jpg?v=1754255070","url":"https:\/\/nvnmarine.com\/collections\/weld-mount-products.oembed?page=5","provider":"NVN Marine","version":"1.0","type":"link"}