Weld Mount lets you fasten wiring, hoses and panels without drilling into your hull. This collection covers stainless studs, standoffs and panel studs that bond to the surface with adhesive. Why Use Adhesive-Mount Fasteners Drilling holes in a boat invites leaks and weakens structure. Weld Mount fasteners bond to clean surfaces with a structural adhesive, giving you a threaded stud or standoff with no holes and no leaks. They are a go-to for routing wire looms, mounting panels and securing hoses in tight spaces. Choosing Studs and Standoffs Pick by stud height and thread size. Heights run from about 0.75 inch up to several inches, and threads come in common sizes such as number 8, number 10, 1/4 inch and...
AT-5 Large White Nylon Tie Mount - Qty. 500The AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with...
AT-3 Small White Nylon Tie Mount - Qty. 500The AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon...
Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains: (1) Plano Storage Box - 11" x 7.25" x 2.75" (50) AT-5 Tie Mount (White) (1) AT-8040 Adhesive (5)...
Acrylic Adhesive - 10-PackCAN NOT SHIP AIR,UPS GROUND ONLYAT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without...
1.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength...
1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength...
1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside...
Footman's Strap MountThe Footman's Strap Mount is designed to be bonded with AT-4020 Acrylic Adhesive. This strap mount is 3.25" long and 1" wide and holds up to...
Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for...
White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for...
Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's...
AT-9500 Polybonder Cartridge - 50mlFeatures: Adhesively bonded fastening systems Plastic Bonder: PP, PE & PTFE 50ml MMA Acrylic Adhesive Made in the U.S.A. SKU: NVN-106701 MPN: AT-9500 UPC:...
AT-651 Mixing Tips for Use with AT-6031 Adhesive - Qty. 10Weld Mount’s AT-651 mixing tip is designed specifically for use with Weld Mount’s AT-6031 adhesive. AT-6031 is a...
AT-6031 Metal Bond AdhesiveAT-6031 is a 10-to-1 metal bonding adhesive. It has high viscosity (cures in 10–12 minutes), has a 6-minute working time, and develops working strength in...
Stainless Steel Heavy Stud 2" Base 3/8" x 16 Thread 2" Tall - 25-PackThe HS200 stud is designed for heavy-load applications such as mounting filters and panels. The...
Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 QuantityStuds with smaller threaded stud inserted into the base. These studs are ideal for mounting...
3" White Round Poly Insulation Washer - 50-PackWeld Mount's 3" White Round Polypropylene Insulation Washer SKU: NVN-89995 MPN: 102450 UPC:
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1" Tall - 100 PackWeld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating...
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.25" Tall - 100 PackWeld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating...
Stainless Steel Panel Stud .62" Base 8 x 32 Thread 1.5" Tall - 100 PackWeld Mount offers wire tie mounts, hose, and cable clamps, studs, standoffs, and floating...
Stainless Steel Stud 1.25" Base #10 x 24 Thread 2.5" TallStainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500...
Polybonder Kit with AT-880 AdhesiveKit Contains: AT-880 Polybonder Adhesive (1) Dispensing Gun (1) Mixing Tips (qty 10) AT-5W (qty 30) Plano Case The Polybonder Kit with AT-880 adhesive...
AT-388 Dispensing GunThe AT-388 Adhesive dispensing gun comes with a 10:1 plunger.For Use With 50mL Cartridges of:AT-880Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge....
AT-880 PolyBonder Adhesive - SingleWeld Mount AT-880 is designed to bond plastics, metals, and rubbers; which have been challenging to bond to, in the past. AT-880 excels at...
Weld Mount lets you fasten wiring, hoses and panels without drilling into your hull. This collection covers stainless studs, standoffs and panel studs that bond to the surface with adhesive.
Drilling holes in a boat invites leaks and weakens structure. Weld Mount fasteners bond to clean surfaces with a structural adhesive, giving you a threaded stud or standoff with no holes and no leaks. They are a go-to for routing wire looms, mounting panels and securing hoses in tight spaces.
Pick by stud height and thread size. Heights run from about 0.75 inch up to several inches, and threads come in common sizes such as number 8, number 10, 1/4 inch and 5/16 inch. Panel studs include a wide base for mounting circuit panels, while standoffs hold components off the surface for airflow and clearance. Match the thread to your hardware and confirm the surface is clean and dry before bonding.
They bond to a clean, prepared surface using a structural adhesive. Once cured, the stud or standoff provides a threaded mounting point with no drilling and no holes in the hull or deck.
Weld Mount offers common sizes including number 8, number 10, 1/4 inch and 5/16 inch threads. Match the stud thread to the nut or hardware you plan to use.
The bonding surface must be clean, dry and free of oil, wax and loose material. Proper prep is what gives the adhesive its full holding strength.
