Coleman 1472A1181 RV AC Blower Wheel Replacement
Coleman 1472A1181 RV AC Blower Wheel Replacement — Product description
The Coleman 1472A1181 is the factory blower wheel for a wide range of Coleman rooftop RV air conditioners. It's the squirrel-cage wheel that moves air across the coil, and when it cracks or falls out of balance you lose airflow and pick up noise. This is the direct replacement that gets your Coleman unit blowing cold and quiet again.
This is the factory replacement blower wheel for a long run of Coleman rooftop air conditioners, part number 1472A1181. It's the squirrel-cage wheel that spins inside the unit and actually moves the air, pulling it across the coil and pushing it down into your rig. When this wheel is healthy, you get quiet, steady airflow. When it isn't, you feel it right away.
Blower wheels take a beating. They run for hours in summer heat, collect dust and road grime, and the plastic can go brittle after enough seasons on the roof. A cracked or out-of-balance wheel is usually what you're hearing when a Coleman unit starts to rattle, hum, or vibrate louder than it used to. Sometimes a fin breaks off and the airflow just drops, so the cabin never really gets cold even though the compressor is running fine. If you've cleaned the coil and checked the filter and the air still feels weak, the blower wheel is the next thing to look at.
This wheel is a direct fit for a wide list of Coleman models, so it covers a lot of ground across older and newer rooftop units. It's built to the original Coleman spec, which means it seats on the motor shaft and balances the way the factory wheel did. No shimming, no guessing. You want a blower wheel that runs true, because a wobble at fan speed puts load on the motor bearings and shortens the life of the whole assembly.
If you've had the shroud off a rooftop A/C before, this is a manageable job. You'll pull the shroud, get to the blower housing, loosen the setscrew on the old wheel, slide it off the shaft, and reverse the process with the new one. Take your time getting it square on the shaft and snug the setscrew down on the flat. If rooftop work isn't your thing, any RV tech will knock this out quickly. Either way, it's a real fix and not a patch, and it gets a struggling Coleman unit blowing cold and quiet again.
Key Features
- Coleman OEM part number 1472A1181, a direct replacement blower wheel
- Squirrel-cage design moves air across the coil for steady cabin airflow
- Fits a wide range of Coleman rooftop units, from the 9000-series through the 49000-series
- Runs true and balanced, so it's easy on the fan motor bearings
- Restores airflow lost to a cracked, chipped, or out-of-balance original wheel
- Straightforward shaft-and-setscrew mount for a manageable rooftop swap
Why Buy from NVN Marine
- Authorized Coleman reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Coleman 1472A1181 RV Air Conditioner Blower Wheel |
|---|---|
| Brand | Coleman |
| Manufacturer | Coleman RVP |
| Manufacturer Part Number | 1472A1181 |
| UPC | 755790406692 |
| Part Type | Blower Wheel |
| Application | RV Rooftop Air Conditioner |
| Replacement Type | Direct OEM Replacement |
| Compatible Models | 9024, 9203, 9204, 9214, 49003, 49004, 49013, 49014, 49023, 49024, 49033, 49201, 49203, 49204, 49211, 49213, 49214, 49221, 49223, 49224, 49231 |
| Sold As | Each |
Frequently asked questions
What does the blower wheel do in my Coleman air conditioner?
It's the squirrel-cage fan wheel that moves air through the unit, pulling it across the coil and pushing conditioned air down into your rig. If it's damaged or unbalanced, airflow drops and the unit gets loud.
How do I know my blower wheel needs replacing?
Common signs are a new rattle, hum, or vibration at fan speed, weak airflow even with a clean filter and coil, or a visible crack or broken fin on the wheel. Those all point to the blower wheel.
Will this fit my Coleman air conditioner?
It's a direct replacement for Coleman models 9024, 9203, 9204, 9214, 49003, 49004, 49013, 49014, 49023, 49024, 49033, 49201, 49203, 49204, 49211, 49213, 49214, 49221, 49223, 49224, and 49231. Match your unit's model number and confirm part number 1472A1181 before ordering.
Is this a genuine Coleman part?
Yes. This is the Coleman RVP OEM blower wheel, part number 1472A1181, not an aftermarket substitute.
Can I replace it myself?
If you're comfortable working on the roof, yes. You pull the shroud, reach the blower housing, loosen the setscrew, slide the old wheel off the motor shaft, and fit the new one square before snugging the setscrew on the flat. If you'd rather not, any RV tech can handle it quickly.
What comes with it?
This is the blower wheel itself. You'll reuse your existing fan motor and mounting hardware unless those are worn or damaged.
