Camco RhinoFLEX 43075 20-Ft RV Sewer Hose Kit

Nobody loves dealing with the black tank. But a good sewer hose kit makes it quick, clean, and honestly kind of painless. The Camco RhinoFLEX 43075 is the complete setup, so you're not standing at the dump station realizing you forgot an adapter or a cap.

Here's what you get in the box. Twenty feet of RhinoFLEX hose that comes as two ten-foot sections, so you can run just one length for a close hookup or connect both when the sewer inlet sits way across the site. A pre-attached clear elbow. A 4-in-1 adapter that threads into the dump-station fittings you'll actually run into. Storage caps to seal the hose ends between trips. Five hose supports. And a storage box with a secure lid that holds all of it.

The RhinoFLEX hose itself is the reason people keep coming back to this kit. It's a heavy-duty polyolefin design with steel wire wound through it, so it holds its shape, resists crushing, and still collapses down for storage when you're done. It won't sag into a puddle between the RV and the inlet the way a cheap accordion hose does. The fittings are pre-attached and swivel, which means you line up the bayonet lugs, give a quarter turn, and you're locked in without fighting the hose.

That clear elbow is a small thing that matters more than you'd think. You can see when the tank has finished draining and when your rinse water finally runs clean, so you know the black tank is actually empty before you pull off. No guessing. The elbow connects to the 4-in-1 adapter, which fits the common dump-station opening sizes you'll find at campgrounds, RV parks, and dump stations across the country. One adapter, most connections handled.

Who's this for? Anybody running a travel trailer, fifth wheel, or motorhome who wants one kit that covers real-world sites. The twenty-foot reach is the sweet spot. Long enough for those pull-through sites where the sewer inlet sits at the far corner, but not so much hose that you're wrestling a giant coil for a hookup that's five feet away. And because it splits into two ten-foot pieces, you carry only what the site needs.

The hose supports are the part first-timers underestimate. Laid flat, a sewer hose holds low spots where waste and rinse water pool. That's how you get smell and slow draining. Set the supports under the run with a slight downhill pitch toward the inlet and everything flows the way gravity intended. The kit includes five of them so you can support the full length on a longer run.

When you're done, it all goes back in the storage box. Cap the hose ends first so nothing drips in your storage bay, drop everything in the box, latch the lid, and slide it into the bumper compartment or a basement bay. Keeping the kit boxed also keeps it out of the sun, which is worth doing. Sewer hoses last longer when they aren't baking in UV between trips.

A few honest notes. This is sewer gear, so treat it like sewer gear. Rinse the hose after every dump, wear a pair of dedicated gloves, and store the dump kit separate from your fresh-water hose. Give the fittings a quick check now and then and make sure the swivels turn freely. Do that and this kit will handle season after season without drama.

If you've been limping along with a mismatched pile of hoses and adapters, this is the reset. One box, everything matched, everything that connects to your rig and to the dump station included. Set it up once and you'll wonder why you waited.