Scanstrut PowerTower mounts get your radar, satcom dome, or camera up high and solid. Match the mount to your exact device, then support it with the right struts. Radar, satellite domes, and cameras work best mounted high and level, and Scanstrut builds the PowerTower mounts and supports that put them there. This collection covers aluminum and composite radar mounts, satcom and camera mounts, deck struts, and mast brackets. Choosing right comes down to matching the mount to your exact device, picking the height and material, and supporting the load. Match the mount to your radar or dome Scanstrut PowerTower mounts are built for specific devices, with models cut for Raymarine, Garmin, and Navico radomes, and others sized for 30cm, 40cm,...
1200mm Deck Strut KitComplete 1200mm Deck Strut Kit - for SC100 Pole Mount Scanstrut deck strut kit 1200mm19308. 1200mm deck strut kit complete 1200mm deck strut kit-SC100 strut...
inc. joiner and fastening kitLMB-EXTSHORT 0.6M Extension Kit for LMB Mounting Pole0.6M Extension Kit for LMB mounting pole. Includes joiner and fastening kit. Single mount for installing an...
SC27 Radar GuardPolished Stainless Steel Guards Protect Radome from damage and reduce wear on the sails.Features: Mounting using radome bolts, no extra fastenings required Easy to fit -...
6" Aluminum PowerTower® for Open Array Raymarine (4'), Furuno (2') & Navico HALO™ (3', 4', 6')Features: Expertly designed to install your antenna on the cabin roof, flybridge or...
Height 300mm / 11.8"12" Aluminum PowerTower® for 30cm & 40cm Satcom AntennasDo you need to raise your Satcom Antenna Clear from the boat?Based on a unique ellipse extrusion,...
6" Aluminum PowerTower® for Cameras & SearchlightsRaise your camera from the deck to ensure clear visibility at all times. Designed with a 30° aft leaning profile and a...
Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting footprint size by up to 60%, providing greater choice...
Mast Mount f/FLIR Navigator M-Series & Cam 100 Compact mast mount for installation of cameras on yacht masts.Features: Innovative mounting foot design Safety wire kit included - independently...
Raymarine 45STV/Intellian i4 satcomTotally universal, the SC105 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat.Supplied as a complete kit, you...
up to 45cm / 17" satcomTotally universal, the SC105 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat.Supplied as a complete...
For small Satcom antennasTotally universal, the SC105 Pole Mount installs your radar or satcom antenna onto the deck or transom of your boat.Supplied as a complete kit, you...
Furuno and other radomesScanstrut's SC103 Pole Mount allows installation of your radar or 30cm or 40cm satcom antenna onto the deck or transom of your boat.Features: Adjustable base,...
Furuno and other radomesSelf Levelling Radar Mount - PoleOur Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As...
Raymarine, Garmin, Navico radomesSelf Levelling Radar Mount - PoleOur Self-Levelling Pole Mount ensures your radar stays level with the horizon at all times for optimum antenna performance. As...
Aft of backstaySelf Levelling Radar Mount - Backstay - Aft (A) - Made specifically for Sitex/Simrad DomesOur Self-Levelling Backstay Mount ensures your radar stays level with the horizon...
Forward of backstay Self Levelling Radar Mount - Backstay - Fwd (F) Made specifically f/Sitex & Simrad DomesOur Self-Levelling Backstay Mount ensures your radar stays level with the...
Based on our unique ellipse extrusion, Scanstrut's Aluminium PowerTower is designed to raise your antenna from the cabin roof, flybridge or radar arch, to ensure the radar has...
Furuno and other radomes plus lights, cameras, GPS/ VHF antennaTapered Radar MastFor Radomes, Lights, Camera and GPS/VHF AntennaSingle combintation mount for radar, lights, GPS/VHF antennas, cameras or search...
Satcom Antenna MountCompatible Units Raymarine: STV 45 Intellian: i4 Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem by reducing the mounting...
Satcom Antenna MountCompatible Units KVH: G4, M5 Sea Tel: Coastal 18, 24, 30 Space on board is always limited for installing satcom/tv antennas. Scanstrut Mounts eliminate this problem...
Mast Mount for Raymarine 24"Mast MountsCompatible Units:Raymarine: 24" 4kW RadomeStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting...
Mast MountsCompatible Units: Furuno 1734/1832/1834/DRS4D/NavNet GMR24HD Interphase RE-8/RE-9 Koden 4kW 20"/4kW (RB715A) Lowrance LRA2400 HD (w/ 19042 Adaptor) Northstar 24" (M Series/8000i) (w/ 19042 Adaptor) Simrad 24" (GB40/NX40/45)...
Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of...
GPS / VHF Antenna Mount for Self Levelling Radar MountSingle mount for installing an additional GPS / VHF antenna above the radar.Features Attaches to top of radome cradle...
Scanstrut PowerTower mounts get your radar, satcom dome, or camera up high and solid. Match the mount to your exact device, then support it with the right struts.
Radar, satellite domes, and cameras work best mounted high and level, and Scanstrut builds the PowerTower mounts and supports that put them there. This collection covers aluminum and composite radar mounts, satcom and camera mounts, deck struts, and mast brackets. Choosing right comes down to matching the mount to your exact device, picking the height and material, and supporting the load.
Scanstrut PowerTower mounts are built for specific devices, with models cut for Raymarine, Garmin, and Navico radomes, and others sized for 30cm, 40cm, and 60cm satcom antennas or for cameras and searchlights. Confirm your radar or dome model and size before ordering so the mount matches the device and bolt pattern. A mount made for your unit drops on without drilling guesswork.
PowerTower mounts come in heights like 10, 12, and 14 inches, and the right height lifts the radar above the crew and hardtop for a clean sweep while clearing the array. Aluminum mounts are strong and traditional, while composite mounts are lighter and will not corrode, which some owners prefer aloft. Choose the height for the clearance you need and the material for your boat.
Some PowerTower mounts add an aft rake or a self-leveling head, which keeps a radome level as the boat trims and pitches so the radar sees a true horizon. On a planing boat that runs bow-high, a leveling or raked mount keeps the picture accurate.
A tall mount carrying a heavy radome needs support so it does not flex or vibrate. Scanstrut deck struts brace the mount to the hardtop or deck for a rock-solid platform. Plan the strut length and angle for your installation, and make sure the structure can carry the weight aloft.
Everything you add up high affects stability, so keep the load within the mount and structure ratings, and confirm the radar or array has room to spin without hitting antennas or the hardtop edge.
Not sure which Scanstrut mount fits your gear? Tell our techs your radar or dome model and your hardtop, and we will match the mount, height, material, and struts so it goes up solid and level.
PowerTower mounts are built for specific devices, with models for Raymarine, Garmin, and Navico radomes and others for satcom domes or cameras. Confirm your radar or dome model and size before ordering so the mount matches the device and bolt pattern.
Mounts come in heights like 10, 12, and 14 inches. The right height lifts the radar above the crew and hardtop for a clean sweep while clearing the array. Choose the height for the clearance your installation needs.
Aluminum mounts are strong and traditional, while composite mounts are lighter and will not corrode, which some owners prefer for weight aloft. Both carry the load when sized correctly, so choose by weight and preference.
A self-leveling head or aft rake keeps a radome level as the boat trims and pitches, so the radar sees a true horizon. On a planing boat that runs bow-high, it keeps the radar picture accurate.
A tall mount carrying a heavy radome needs struts to brace it to the hardtop or deck so it does not flex or vibrate. Plan the strut length and angle, and confirm the structure can carry the weight aloft.
