Mid-Rail Chock/Cleat Stainless SteelSchaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will...
Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will...
Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and...
Fast Entry Cam Cleat f/1/4"-7/16" Line - 6mm-12mm70-17 Fast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin(tm) Ball Bearings, Computer Designed High Flare allows for easy entry...
Flat/Large Sail Track StopsFlat/Large: 0.75 x 1 x 0.125" (19 x 25 x 3mm)When it's time to lower your sail you can rely on Davis' Flat Sail Track...
Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope DiameterSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life....
T-Track Endstop for 1" Track - Black1" Black Endstop Schaefer 1" end stop, black | for sailing. Use these plastic cone stops to protect the feet. Sold separately....
Shroud CleatPlain cleat for flag halyards etc.Features:Nylon SKU: NVN-99161 MPN: 52110 UPC: 5035088521104
Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a...
Stainless 1-1/4" T-Track Slider - Eye Slide/LinedSpecifications: Track Size 1-1/4" x 3/16" (32 mm x 5 mm) Max. Boat Length 38' (10 m) Max. Boat Weight 12000 lbs....
Stanchion Bullseye Stanchion Bullseye which fits the base of stanchions for smooth control of furling lines. The contemporary sleek design features a Dyneema-effect securing strap over the metal retaining...
Fast Entry Cam Cleat - LargeFast Entry Cam Cleat. Features Die Cast Aluminum Cams, Delrin™ Ball Bearings, Computer Designed High Flare allows for easy entry at various angles....
Furler Pull Back Bracket/Haylard Restrainer - LargeHalyard Restrainer mounts directly on the front of the mast below the Genoa Halyard sheave. Restrainer "deflects" halyard eliminating Halyard Wrap.Halyard Restrainer...
Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the...
Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most...
V-Cleat Fairlead - Small - 3-6mm(1/8" - 1/4") Rope DiameterV-Cleats are a simple solution to cleating lines under moderate loads. Cut away in base of fairlead cleats can...
Stainless Steel Cleat - 6"6" SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/2" (12mm), Length 6" (152mm), Height 1.2"...
T-Track Endstop for 1-1/4" Track - Black1 1/4" Black Endstop Schaefer 1 1/4" end stop, black | for sailing. Use these plastic cone stops to protect the...
Swivel Dead Eye & Cleat Fairlead - 3-12mm(1/8 - 1/2") RopeSwivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low...
Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most...
Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the...
"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few different ways: Use the claw...
Retaining Clip - Stainless SteelFeatures: 2.7mm(3/32") Diameter x 16mm(5/8") ID Suits Clevis Pin - RF267-RF274 "RonstanThis retaining clip works well for securing rudders and large pins. Great for...
Aluminum Deck Cleat - 8"Length 8" (203 mm), Line Score 5/8" (16 mm), Fasteners (2), 5/16" FH (8 mm), C/C A 2" (51 mm), Weght 8.5 oz. (240...
