{"title":"Raymarine Accessories","description":"\u003cp class=\"nvn-collection-hero\"\u003eThe right cable and mount make a Raymarine install clean and reliable. Match the accessory to your network, your display, and your autopilot before you order.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-collection-guide\"\u003e\n\u003ch2\u003eKnow your network SeaTalkng or RayNet\u003c\/h2\u003e\n\u003cp\u003eA Raymarine system relies on its network and the cables that tie it together. This collection covers the accessories that finish and connect an install. SeaTalkng and RayNet cables, power and data leads, radar cables, display mounts and covers, transducer adapters, and autopilot parts are all included. The trick to ordering right is matching each accessory to your exact network type, display model, and autopilot.\u003c\/p\u003e\n\u003cp\u003eRaymarine uses two backbones. SeaTalkng is the NMEA 2000 compatible network for instruments, sensors, and autopilot data. It is built with a backbone, spurs, tees, and terminators. RayNet is the high speed Ethernet link for radar, sonar, and sharing charts between displays. Confirm which network a device uses before you buy cables because the connectors are not interchangeable.\u003c\/p\u003e\n\u003ch2\u003eMatch cables to length and connector\u003c\/h2\u003e\n\u003cp\u003ePower, data, radar, and daisy chain cables come in set lengths with specific connectors for each display generation like the Axiom and Element families. Measure the run and add slack for a clean route. Then match the connector to your unit. A cable that is the wrong length or connector will not seat so check both before ordering.\u003c\/p\u003e\n\u003ch2\u003eMounts and covers protect the gear\u003c\/h2\u003e\n\u003cp\u003eFlush mounts give a clean dash and bracket mounts let you angle and remove the display. Sun covers shield the screen from UV and salt when the boat sits. This keeps the display readable for years. Match the mount and cover to your exact display size and model.\u003c\/p\u003e\n\u003ch2\u003eAutopilot and tiller parts\u003c\/h2\u003e\n\u003cp\u003eRaymarine offers pushrods, tiller brackets, pedestal sockets, and drive parts for tiller and wheel pilots. Match these to your specific autopilot model so the geometry and fit are correct. An autopilot relies on the right hardware to steer accurately.\u003c\/p\u003e\n\u003ch2\u003eAdapters keep your existing gear\u003c\/h2\u003e\n\u003cp\u003eAdapter cables let you bridge older SeaTalk to SeaTalkng or mate an existing transducer to a new display. You can keep hardware you already trust. The right adapter saves a full re wire or a transducer swap.\u003c\/p\u003e\n\u003ch2\u003eConfirm compatibility first\u003c\/h2\u003e\n\u003cp\u003eRaymarine accessories are model and network specific. Check your display generation, network type, and autopilot model before ordering so the parts drop in. Not sure which cables and mounts your Raymarine setup needs. Tell our techs your display, network, and autopilot. We will match the SeaTalkng or RayNet cables, mounts, covers, and adapters so it all connects and works.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-collection-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the difference between SeaTalkng and RayNet?\u003c\/summary\u003e\n    \u003cp\u003eSeaTalkng is Raymarine NMEA 2000 compatible network for instruments, sensors, and autopilot data built with a backbone, spurs, tees, and terminators. RayNet is the high speed Ethernet link for radar, sonar, and chart sharing between displays. The connectors are not interchangeable.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I pick the right Raymarine cable?\u003c\/summary\u003e\n    \u003cp\u003eMatch the cable to its network and your display generation. Then measure the run and add slack for routing. Power, data, and radar cables use specific connectors for families like Axiom and Element so confirm both length and connector.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eDo I need a cover for my Raymarine display?\u003c\/summary\u003e\n    \u003cp\u003eA sun cover shields the screen from UV and salt when the boat sits. This keeps the display readable for years. Match the cover to your exact display size and model so it fits snugly.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I connect old SeaTalk gear to a new system?\u003c\/summary\u003e\n    \u003cp\u003eOften yes with the correct adapter cable that bridges legacy SeaTalk to SeaTalkng. Adapters let you keep instruments or sensors you already trust instead of replacing the whole network.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I choose autopilot parts?\u003c\/summary\u003e\n    \u003cp\u003eMatch pushrods, tiller brackets, and drive parts to your specific Raymarine autopilot model so the geometry and fit are correct. An autopilot relies on the right hardware to steer accurately so confirm the model before ordering.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRelated Collections\u003c\/h2\u003e\n\u003cul class=\"nvn-related-collections\"\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-instruments\"\u003eMarine Navigation \u0026amp; Instruments\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/raymarine-products\"\u003eRaymarine\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-transducer-accessories\"\u003eTransducer Accessories\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-accessories\"\u003eNavigation Accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"CollectionPage\",\n    \"name\": \"Raymarine Accessories\",\n    \"description\": \"Shop Raymarine accessories including SeaTalkng cables, RayNet cables, mounts, covers, and autopilot parts. Same day shipping from NVN Marine.\",\n    \"url\": \"https:\/\/www.nvnmarine.com\/collections\/raymarine-products-accessories\"\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"BreadcrumbList\",\n    \"itemListElement\": [\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 1,\n            \"name\": \"Home\",\n            \"item\": \"https:\/\/www.nvnmarine.com\"\n        },\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 2,\n            \"name\": \"Raymarine Accessories\",\n            \"item\": \"https:\/\/www.nvnmarine.com\/collections\/raymarine-products-accessories\"\n        }\n    ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the difference between SeaTalkng and RayNet?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"SeaTalkng is Raymarine NMEA 2000 compatible network for instruments, sensors, and autopilot data built with a backbone, spurs, tees, and terminators. RayNet is the high speed Ethernet link for radar, sonar, and chart sharing between displays. The connectors are not interchangeable.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I pick the right Raymarine cable?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Match the cable to its network and your display generation. Then measure the run and add slack for routing. Power, data, and radar cables use specific connectors for families like Axiom and Element so confirm both length and connector.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need a cover for my Raymarine display?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"A sun cover shields the screen from UV and salt when the boat sits. This keeps the display readable for years. Match the cover to your exact display size and model so it fits snugly.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I connect old SeaTalk gear to a new system?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Often yes with the correct adapter cable that bridges legacy SeaTalk to SeaTalkng. Adapters let you keep instruments or sensors you already trust instead of replacing the whole network.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I choose autopilot parts?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Match pushrods, tiller brackets, and drive parts to your specific Raymarine autopilot model so the geometry and fit are correct. An autopilot relies on the right hardware to steer accurately so confirm the model before ordering.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","products":[{"product_id":"25178-raymarine-1m-seatalk-interconnect-cable","title":"Raymarine 1m SeaTalk Interconnect Cable","description":"SeaTalk Extension Cable 1m\u003cbr\u003e\u003cbr\u003e\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Product\"\u003e\n\u003ch1 itemprop=\"name\"\u003eRaymarine D284 SeaTalk Interconnect Cable - 1m Marine Electronics Network Cable\u003c\/h1\u003e\n\n\u003cdiv itemprop=\"description\"\u003e\n\u003cp\u003e\u003cstrong\u003eConnect your Raymarine marine electronics seamlessly with the D284 SeaTalk interconnect cable\u003c\/strong\u003e - engineered for reliable data communication between SeaTalk-compatible instruments. This professional-grade 1-meter cable creates robust networking connections for integrated marine navigation systems.\u003c\/p\u003e\n\n\u003ch2\u003eSeaTalk System Integration\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeaTalk Protocol\u003c\/strong\u003e: Native compatibility with Raymarine's proprietary SeaTalk communication standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin Molded Connectors\u003c\/strong\u003e: Professional sealed connectors ensure reliable water-resistant connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat Cable Design\u003c\/strong\u003e: Low-profile construction simplifies installation in tight spaces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Meter Length\u003c\/strong\u003e: Optimal length for connecting instruments in different panels or pods\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Installation\u003c\/strong\u003e: Simple connection between SeaTalk devices without programming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e: Built to withstand harsh marine environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/PropertyValue\"\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eCable Length\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003e1 meter (3.3 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eCommunication Protocol\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eSeaTalk®\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eConnector Type\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eSeaTalk® 3-Pin Molded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eCable Style\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eFlat Marine Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eExterior Color\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eWater Resistance\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eSealed Connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eInstallation Type\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003ePlug-and-Play\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eData Direction\u003c\/strong\u003e:\u003c\/td\u003e\n\u003ctd itemprop=\"value\"\u003eBidirectional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eMarine Electronics Networking\u003c\/h2\u003e\n\u003cp\u003eThe D284 enables seamless data sharing between SeaTalk-compatible devices including chartplotters, GPS units, autopilots, wind instruments, depth sounders, and navigation displays. The 1-meter length provides flexibility for connecting instruments in separate panels while maintaining reliable signal transmission.\u003c\/p\u003e\n\n\u003ch2\u003eProfessional Installation Features\u003c\/h2\u003e\n\u003cp\u003eThe flat cable design allows easy routing through tight spaces, behind panels, and around corners without kinking or signal degradation. Molded connectors provide secure connections that resist vibration, moisture, and corrosion typical in marine environments.\u003c\/p\u003e\n\n\u003ch2\u003eSeaTalk System Benefits\u003c\/h2\u003e\n\u003cp\u003eOnce connected, SeaTalk devices automatically share relevant data including GPS position, depth readings, wind information, and navigation data. This integration eliminates the need for multiple sensors and ensures all instruments display consistent information across your marine electronics network.\u003c\/p\u003e\n\n\u003ch2\u003eVersatile Connectivity Applications\u003c\/h2\u003e\n\u003cp\u003eIdeal for extending SeaTalk networks between different instrument locations, connecting autopilots to navigation systems, linking wind instruments to chartplotters, or creating redundant connections for critical navigation data sharing in professional marine applications.\u003c\/p\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhich Raymarine devices are compatible with the D284 cable?\u003c\/h3\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/Schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe D284 connects any SeaTalk-enabled Raymarine devices including chartplotters, autopilots, GPS units, wind instruments, depth sounders, and displays that feature SeaTalk connectivity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan I daisy-chain multiple D284 cables for longer runs?\u003c\/h3\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/Schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, SeaTalk cables can be daisy-chained to extend network connections. However, consider using longer single cables when possible to minimize connection points and potential failure locations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes the D284 require power or configuration?\u003c\/h3\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/Schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo, the D284 is a passive interconnect cable requiring no power or configuration. Simply connect between SeaTalk devices and data sharing begins automatically according to each device's capabilities.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs the 1-meter length suitable for most installations?\u003c\/h3\u003e\n\u003cdiv itemscope itemtype=\"https:\/\/Schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n\u003cp itemprop=\"text\"\u003eThe 1-meter length is ideal for connecting instruments in different panels or across typical helm configurations. For longer runs, Raymarine offers extended length SeaTalk cables in various sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eProfessional Marine Networking Solution\u003c\/h2\u003e\n\u003cp\u003eTrust Raymarine's marine electronics expertise with the D284 SeaTalk interconnect cable. This essential networking component ensures reliable data communication throughout your integrated marine electronics system, enhancing safety and operational efficiency on the water.\u003c\/p\u003e\n\n\u003cmeta itemprop=\"mpn\" content=\"D284\"\u003e\n\u003cmeta itemprop=\"brand\" content=\"Raymarine\"\u003e\n\u003cmeta itemprop=\"model\" content=\"D284\"\u003e\n\u003cmeta itemprop=\"gtin\" content=\"723193102329\"\u003e\n\u003c\/div\u003e\n\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D284 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D284 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk Interconnect Cable, 3ft. (1m)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eSeaTalk Interconnect cable for linking SeaTalk devices\u003cbr\u003e\u003cbr\u003eSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end. \u003cbr\u003e\u003cbr\u003e\"Raymarine \\u00b7 SerialSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14067\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D284\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102329\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579423837,"sku":"CWR-14067","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-1m-seatalk-interconnect-1.jpg?v=1673144874"},{"product_id":"25179-raymarine-3m-seatalk-interconnect-cable","title":"Raymarine 3m SeaTalk Interconnect Cable","description":"SeaTalk Extension Cable 3m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eSeamless Connectivity for Your Marine Electronics\u003c\/h2\u003e\n    \u003cp\u003eEnhance your boating setup with the reliable Raymarine 3m SeaTalk Interconnect Cable. Designed specifically for SeaTalk networks, this cable ensures smooth communication between your instruments, autopilots, and other onboard devices. Whether you're upgrading your helm station or expanding your instrumentation, this 3-meter cable provides the perfect length for clean, clutter-free installations without excess wiring.\u003c\/p\u003e\n    \u003cp\u003eCrafted with marine-grade durability in mind, it features flat-style, 3-pin molded connectors that snap securely into place, resisting corrosion and vibration from rough seas. Say goodbye to unreliable connections that fail during critical moments— this cable keeps your data flowing accurately for wind, speed, depth, and navigation info.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-installation\"\u003e\n    \u003ch2\u003eWhy Boaters Trust This Interconnect Cable\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e No tools needed—just connect SeaTalk-compatible devices like ST-series instruments, SmartPilot autopilots, or multifunction displays for instant network integration.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOptimal Length for Flexibility:\u003c\/strong\u003e At 3 meters (about 9 feet), it's ideal for routing behind panels or across consoles without sharp bends that could damage wires.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeatherproof and Rugged:\u003c\/strong\u003e Built to withstand saltwater exposure, UV rays, and constant flexing, ensuring long-term performance on deck or below.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrevents Signal Loss:\u003c\/strong\u003e High-quality twisted-pair wiring minimizes interference, delivering precise NMEA 0183-like data sharing across your SeaTalk bus.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003ch3\u003eQuick Installation Guide\u003c\/h3\u003e\n    \u003col\u003e\n      \u003cli\u003ePower off all devices to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003eIdentify SeaTalk ports (yellow 3-pin connectors) on your units.\u003c\/li\u003e\n      \u003cli\u003eRoute the cable neatly, securing with ties or clips.\u003c\/li\u003e\n      \u003cli\u003ePush connectors firmly until they click—test the network by powering up and checking data sync.\u003c\/li\u003e\n      \u003cli\u003eFor daisy-chaining multiple devices, use additional interconnects or backbone kits as needed.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Label your cables during install for easy troubleshooting later. This small step saves hours during maintenance seasons.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-tips\"\u003e\n    \u003ch2\u003ePerfect Fit for Raymarine SeaTalk Systems\u003c\/h2\u003e\n    \u003cp\u003eCompatible with a wide range of legacy and current SeaTalk gear, including popular ST40 Bidata, ST60+ Tridata, Raystar GPS sensors, and Type 1\/300 course computers. If you're transitioning to newer NMEA 2000 setups, pair it with Raymarine's SeaTalk to SeaTalk-ng converters for hybrid networks. Avoid mixing with non-SeaTalk cables to prevent compatibility glitches—stick to official interconnects for peak reliability.\u003c\/p\u003e\n    \u003cp\u003eReal-world use: Cruisers love it for linking cockpit repeaters to chartplotters, while offshore racers rely on its stability during high-speed runs.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-best-practices\"\u003e\n    \u003ch2\u003eKeep Your Cable Performing Like New\u003c\/h2\u003e\n    \u003cp\u003eRegular care extends lifespan: Rinse connectors with fresh water after saltwater exposure, inspect for frays annually, and store spares in a dry locker. If a connector loosens over time, a gentle clean with electrical contact spray restores like-new contact without disassembly.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat devices is the Raymarine 3m SeaTalk Interconnect Cable compatible with?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's designed for all SeaTalk-enabled Raymarine products, such as ST40\/ST60 instruments, autopilots, GPS receivers, and wind\/depth sensors. Not directly compatible with SeaTalk-ng or NMEA 2000 without adapters.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable waterproof for marine use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the molded 3-pin connectors are sealed against water ingress, making it suitable for exposed deck installations. However, avoid submersion and protect routing from constant wave splash.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this cable to extend my SeaTalk network?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—daisy-chain multiple 3m cables for longer runs, up to the network's total limit of about 100 meters. For backbone extensions, consider Raymarine's dedicated spur cables.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the difference between SeaTalk interconnect and backbone cables?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eInterconnect cables like this one link devices directly in a simple bus topology. Backbone cables form the high-speed NMEA 2000\/SeaTalk-ng main line, with drops for devices.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I know if my connector is fully seated?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eListen for a distinct click when pushing together. Data sharing across the network confirms proper connection—intermittent displays indicate reseating needed.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes this cable support power distribution?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSeaTalk cables carry both data and 12V power for low-draw devices. For power-hungry systems, use a dedicated power insertion point to avoid voltage drops.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D285 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D285 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk Interconnect Cable, 9ft. (3m)\u003c\/b\u003e\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk Interconnect cable for linking SeaTalk devices\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin\u003cbr\u003emolded connectors on each end. \u003cbr\u003e\u003cbr\u003eThis product is brand new, unopened and sealed in its original factory packaging. -SeaTalk interconnect cable, 9 feet. (3m) SeaTalk interconnection cable for connecting SeaTalk devices SeaTalk...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14068\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D285\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102336\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579456605,"sku":"CWR-14068","price":53.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3m-seatalk-interconnect-1.jpg?v=1673144880"},{"product_id":"25180-raymarine-5m-seatalk-interconnect-cable","title":"Raymarine 5m SeaTalk Interconnect Cable","description":"SeaTalk Extension Cable 5m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Connectivity for Your Marine Electronics\u003c\/h2\u003e\n    \u003cp\u003eEnhance your onboard navigation and instrumentation setup with the Raymarine 5m SeaTalk Interconnect Cable. Designed specifically for SeaTalk networks, this durable cable ensures reliable communication between compatible devices, from autopilots and multifunction displays to wind instruments and GPS receivers. Its 5-meter length strikes the perfect balance for most cockpit and helm installations, minimizing excess wiring while providing flexibility for custom layouts.\u003c\/p\u003e\n    \u003cp\u003eWhether you're upgrading an older Raymarine system or building a new one, this interconnect cable simplifies daisy-chaining multiple units. The flat-profile design tucks neatly into tight spaces, reducing clutter and improving the aesthetics of your console.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eRobust Construction for Harsh Marine Conditions\u003c\/h2\u003e\n    \u003cp\u003eBuilt to withstand the rigors of saltwater exposure, UV rays, and constant vibration, the cable features high-quality 3-pin molded connectors that deliver a secure, waterproof fit. These connectors prevent corrosion and signal loss, ensuring consistent performance even during rough seas.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Precisely 5 meters (about 16 feet 3 inches) for versatile routing.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStyle:\u003c\/strong\u003e Flat cable reduces bulk, ideal for routing behind panels.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Matching 3-pin plugs on both ends for plug-and-play simplicity.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Tinned wiring resists moisture ingress and fatigue.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eUnlike generic cables, this Raymarine original maintains full data integrity across NMEA 0183-like SeaTalk protocols, avoiding compatibility glitches that plague third-party alternatives.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility with Raymarine SeaTalk Ecosystem\u003c\/h2\u003e\n    \u003cp\u003eThis cable integrates flawlessly with legacy SeaTalk devices, including ST40, ST60+, SmartPilot series, and RL70\/80 chartplotters. It's also a key component for expanding networks in hybrid SeaTalk to SeaTalk-ng conversions using adapters.\u003c\/p\u003e\n    \u003cp\u003eFor boaters transitioning systems, pair it with backbone kits or junction boxes to create a star or bus topology, optimizing signal paths and power distribution. Always verify your devices use the classic SeaTalk yellow connector standard for direct compatibility.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEasy Installation Tips for DIY Boaters\u003c\/h2\u003e\n    \u003cp\u003eInstalling the 5m SeaTalk cable is straightforward, empowering weekend warriors to handle it without professional help:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down all devices and disconnect batteries.\u003c\/li\u003e\n      \u003cli\u003eRoute the flat cable along existing looms, using cable ties to secure it away from heat sources.\u003c\/li\u003e\n      \u003cli\u003eAlign the 3-pin connectors—note the keyed design prevents incorrect insertion.\u003c\/li\u003e\n      \u003cli\u003eTest the network by powering up sequentially; check for solid network status lights.\u003c\/li\u003e\n      \u003cli\u003eSeal any deck penetrations with marine-grade grommets.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Label both ends for future troubleshooting, and keep spares aboard for quick fixes during extended cruises.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy This Cable Elevates Your Boating Experience\u003c\/h2\u003e\n    \u003cp\u003eInvesting in genuine Raymarine cabling means fewer dropped signals, accurate data sharing, and peace of mind on the water. It supports critical functions like autopilot course corrections based on real-time wind data or GPS waypoints displayed across instruments. Boaters report fewer intermittent faults compared to extension hacks, translating to safer, more enjoyable voyages.\u003c\/p\u003e\n    \u003cp\u003eIn a world of wireless hype, wired SeaTalk remains rock-solid for core marine electronics, especially where bandwidth demands are modest but reliability is paramount.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eCare and Maintenance for Longevity\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eInspect connectors annually for salt buildup; rinse with fresh water.\u003c\/li\u003e\n      \u003cli\u003eAvoid sharp bends that could stress the jacket.\u003c\/li\u003e\n      \u003cli\u003eStore excess length coiled loosely in dry compartments.\u003c\/li\u003e\n      \u003cli\u003eReplace if insulation cracks or pins loosen—early intervention prevents network-wide issues.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the exact length of the Raymarine 5m SeaTalk Interconnect Cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The cable measures precisely 5 meters, equivalent to approximately 16 feet 3 inches, providing ample reach for most marine installations without unnecessary excess.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable work with all Raymarine SeaTalk devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it connects any standard SeaTalk-equipped devices like ST series instruments, autopilots, and chartplotters using the classic 3-pin yellow connectors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the cable waterproof and suitable for outdoor marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely. The molded connectors are fully waterproof, and the construction resists saltwater corrosion, UV damage, and vibration for reliable deck-level performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this to extend my SeaTalk network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's ideal for daisy-chaining devices or bridging gaps in your network. For larger setups, combine with junction boxes to maintain signal strength.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the difference between this and SeaTalk-ng cables?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This is for the original SeaTalk protocol (yellow 3-pin). SeaTalk-ng uses a different backbone system; use adapters for conversions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot if the network isn't communicating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check connections for firmness, power sequence (instruments first), and inspect for damage. Ensure no polarity mix-ups—SeaTalk is polarity-sensitive.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the flat design better than round cables?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The flat profile is slimmer and more flexible, making it easier to route through tight spaces and behind panels without adding bulk.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the exact length of the Raymarine 5m SeaTalk Interconnect Cable?\u003c\/summary\u003e\n        \u003cp\u003eThe cable measures precisely 5 meters, equivalent to approximately 16 feet 3 inches, providing ample reach for most marine installations without unnecessary excess.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this cable work with all Raymarine SeaTalk devices?\u003c\/summary\u003e\n        \u003cp\u003eYes, it connects any standard SeaTalk-equipped devices like ST series instruments, autopilots, and chartplotters using the classic 3-pin yellow connectors.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the cable waterproof and suitable for outdoor marine use?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely. The molded connectors are fully waterproof, and the construction resists saltwater corrosion, UV damage, and vibration for reliable deck-level performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this to extend my SeaTalk network?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's ideal for daisy-chaining devices or bridging gaps in your network. For larger setups, combine with junction boxes to maintain signal strength.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the difference between this and SeaTalk-ng cables?\u003c\/summary\u003e\n        \u003cp\u003eThis is for the original SeaTalk protocol (yellow 3-pin). SeaTalk-ng uses a different backbone system; use adapters for conversions.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I troubleshoot if the network isn't communicating?\u003c\/summary\u003e\n        \u003cp\u003eCheck connections for firmness, power sequence (instruments first), and inspect for damage. Ensure no polarity mix-ups—SeaTalk is polarity-sensitive.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the flat design better than round cables?\u003c\/summary\u003e\n        \u003cp\u003eThe flat profile is slimmer and more flexible, making it easier to route through tight spaces and behind panels without adding bulk.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D286 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D286 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk Interconnect Cable, 16ft. 3in. (5m)\u003c\/b\u003e\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk Interconnect cable for linking SeaTalk devices\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin\u003cbr\u003emolded connectors on each end.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eSea Talk interconnect cable, 16 feet. 3-inch (5m) Sea Talk interconnect cable for connecting Sea Talk devices. Sea Talk interconnect cable for connecting Sea Talk devices. Flat style 3-...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14069\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D286\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102343\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579489373,"sku":"14069","price":61.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-5m-seatalk-interconnect-1.jpg?v=1673144886"},{"product_id":"25181-raymarine-9m-seatalk-interconnect-cable","title":"Raymarine 9m SeaTalk Interconnect Cable","description":"SeaTalk Extension Cable 9m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"cable-overview\"\u003e\n    \u003ch2\u003eSeamless Connectivity for Your Marine Electronics\u003c\/h2\u003e\n    \u003cp\u003eEnhance your boating setup with this robust interconnect cable designed specifically for SeaTalk networks. Measuring a generous 9 meters, it provides the flexibility to link instruments, autopilots, and other devices across larger cockpits or deck areas without signal loss or clutter. Its flat-profile design slips easily into tight spaces, making routing a breeze during installations or upgrades.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted for the demanding marine environment, this cable stands up to saltwater exposure, UV rays, and constant vibration. Forget about fragile connections that fail mid-voyage—rely on proven engineering that keeps your navigation data flowing reliably from helm to display.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eWhy This Cable Stands Out in SeaTalk Setups\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e 9 meters of length bridges gaps between devices mounted far apart, ideal for sailboats or larger power vessels.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSecure 3-Pin Connectors:\u003c\/strong\u003e Molded plugs ensure waterproof, vibration-resistant fits that lock in place and resist corrosion over time.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlat Cable Design:\u003c\/strong\u003e Reduces snag hazards and simplifies concealment under panels or along bulkheads.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e No special tools required—just connect and power up for instant network integration.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurability Built-In:\u003c\/strong\u003e Marine-grade materials handle extreme conditions, from tropical storms to freezing latitudes.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-guide\"\u003e\n    \u003ch2\u003ePerfect Fit for Legacy SeaTalk Systems\u003c\/h2\u003e\n    \u003cp\u003eThis cable shines in daisy-chain configurations, linking classics like Raymarine ST40, ST60, and SmartPilot series. It supports data sharing for wind, depth, speed, and heading info across your network. While optimized for original SeaTalk protocols, savvy installers often pair it with adapters for hybrid setups involving newer components.\u003c\/p\u003e\n    \n    \u003cp\u003eCommon applications include:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eConnecting multifunction displays to transducers.\u003c\/li\u003e\n      \u003cli\u003eExtending autopilot controls to remote stations.\u003c\/li\u003e\n      \u003cli\u003eBuilding instrument clusters on flybridges or consoles.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003ePro tip: Map your device layout first to minimize cable runs and maximize efficiency—longer cables like this one reduce the need for multiple shorter ones.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eEffortless Installation for DIY Boaters\u003c\/h2\u003e\n    \u003cp\u003eGetting this cable online takes minutes. Start by powering down your system. Identify SeaTalk ports on your devices—usually labeled with a distinctive round icon. Plug one end into the output port of your primary device (like a GPS or instrument hub), then route the cable neatly to the next unit. Secure with cable ties away from heat sources or moving parts.\u003c\/p\u003e\n    \n    \u003ch3\u003eBest Practices for Long-Term Reliability\u003c\/h3\u003e\n    \u003col\u003e\n      \u003cli\u003eAvoid sharp bends near connectors to prevent strain.\u003c\/li\u003e\n      \u003cli\u003eDrizzle dielectric grease on pins for extra corrosion protection.\u003c\/li\u003e\n      \u003cli\u003eTest continuity with a multimeter before full deployment.\u003c\/li\u003e\n      \u003cli\u003eLabel ends for quick troubleshooting during maintenance.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003eOnce connected, cycle power and verify data sync across devices. Smooth sailing ahead!\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-advice\"\u003e\n    \u003ch2\u003eKeep Your Network Rock-Solid Season After Season\u003c\/h2\u003e\n    \u003cp\u003eRegular care extends this cable's life far beyond stock alternatives. Rinse with fresh water after saltwater exposure, inspect for chafe annually, and replace if insulation cracks. In high-humidity areas, silica packs near junctions ward off moisture ingress.\u003c\/p\u003e\n    \n    \u003cp\u003eUsers report these cables outlasting generic substitutes by years, thanks to superior shielding that blocks interference from nearby engines or radios.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is the exact length of this SeaTalk interconnect cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It measures 9 meters, or approximately 29 feet 3 inches, providing ample reach for most marine installations.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What type of connectors are on the ends of this cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It features flat-style, 3-pin molded connectors on both ends, designed for secure, waterproof SeaTalk connections.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this cable compatible with all Raymarine SeaTalk devices?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it's tailored for legacy SeaTalk devices like ST series instruments and autopilots. Adapters may be needed for SeaTalk-ng or NMEA 2000 systems.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this cable be used in harsh marine environments?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—it's built with marine-grade materials to withstand saltwater, UV exposure, vibration, and temperature extremes.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I troubleshoot if data isn't passing through the cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Check for secure connections, power cycle the network, inspect for damage, and test with a shorter cable to isolate issues.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What's the difference between this cable and shorter SeaTalk options?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"This 9m version offers greater flexibility for spanning larger distances, reducing the need for junctions that can introduce failure points.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does the flat design affect performance?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No—the flat profile maintains full signal integrity while making it easier to route through consoles and bulkheads without bulk.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat is the exact length of this SeaTalk interconnect cable?\u003c\/h3\u003e\n        \u003cp\u003eIt measures 9 meters, or approximately 29 feet 3 inches, providing ample reach for most marine installations.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat type of connectors are on the ends of this cable?\u003c\/h3\u003e\n        \u003cp\u003eIt features flat-style, 3-pin molded connectors on both ends, designed for secure, waterproof SeaTalk connections.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs this cable compatible with all Raymarine SeaTalk devices?\u003c\/h3\u003e\n        \u003cp\u003eYes, it's tailored for legacy SeaTalk devices like ST series instruments and autopilots. Adapters may be needed for SeaTalk-ng or NMEA 2000 systems.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan this cable be used in harsh marine environments?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely—it's built with marine-grade materials to withstand saltwater, UV exposure, vibration, and temperature extremes.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I troubleshoot if data isn't passing through the cable?\u003c\/h3\u003e\n        \u003cp\u003eCheck for secure connections, power cycle the network, inspect for damage, and test with a shorter cable to isolate issues.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat's the difference between this cable and shorter SeaTalk options?\u003c\/h3\u003e\n        \u003cp\u003eThis 9m version offers greater flexibility for spanning larger distances, reducing the need for junctions that can introduce failure points.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes the flat design affect performance?\u003c\/h3\u003e\n        \u003cp\u003eNo—the flat profile maintains full signal integrity while making it easier to route through consoles and bulkheads without bulk.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eSeaTalk Interconnect Cable, 29ft. 3in. (9m)\u003c\/b\u003e\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk Interconnect cable for linking SeaTalk devices\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin\u003cbr\u003emolded connectors on each end.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eSea Talk interconnect cable, 29 feet. 3-inch (9m) Sea Talk interconnect cable for connecting Sea Talk devices. Sea Talk interconnect cable for connecting Sea Talk devices. Flat style 3-...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14070\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D287\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102350\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579554909,"sku":"14070","price":70.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-9m-seatalk-interconnect-1.jpg?v=1673144891"},{"product_id":"25182-raymarine-20m-seatalk-interconnect-cable","title":"Raymarine 20m SeaTalk Interconnect Cable","description":"SeaTalk Extension Cable 20m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Marine Electronics Network with Reliable Connectivity\u003c\/h2\u003e\n    \u003cp\u003eConnecting your boat's instruments seamlessly is crucial for safe and efficient navigation. This 20-meter SeaTalk interconnect cable stands out by providing the extended reach needed for larger vessels, ensuring your autopilot, GPS, radar, and other devices communicate without signal loss. Crafted for the demanding marine environment, it features rugged construction that resists corrosion, UV exposure, and constant vibration, keeping your setup operational season after season.\u003c\/p\u003e\n    \u003cp\u003eUnlike shorter cables that limit placement options, this extended length offers flexibility in routing around bulkheads, through consoles, or along decks, reducing clutter and simplifying upgrades to your helm station.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features for Superior Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlat 3-Pin Molded Connectors:\u003c\/strong\u003e Secure, waterproof connections that snap into place effortlessly, minimizing downtime during installation or troubleshooting.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e20-Meter Length (65 Feet):\u003c\/strong\u003e Ideal for bridging distant components, such as linking a cockpit display to an engine room sensor or extending from the chart table to the flybridge.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Quality Insulation:\u003c\/strong\u003e Protects against moisture ingress and electrical interference, maintaining data integrity even in rough seas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlexible Yet Durable Design:\u003c\/strong\u003e Easy to coil and store, with reinforcement to prevent kinking or cracking over time.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBoaters often overlook cable quality until a failure strands them— this cable prioritizes longevity, drawing from proven designs used in professional setups worldwide.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility Across SeaTalk Systems\u003c\/h2\u003e\n    \u003cp\u003eEngineered specifically for SeaTalk networks, this cable integrates flawlessly with a wide array of Raymarine instruments. Pair it with older ST40 or ST60 series displays, classic autopilots like the ST5000, or even hybrid systems transitioning to newer protocols. It's a go-to solution for retrofitting legacy gear without full system overhauls, saving time and resources on the water.\u003c\/p\u003e\n    \u003cp\u003ePro tip: In multi-station helm configurations, daisy-chain several units to create a robust backbone, using this cable for the longer runs where signal strength matters most.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation and Routing Tips\u003c\/h2\u003e\n    \u003cp\u003eGetting this cable up and running takes minutes. Simply plug one end into your primary SeaTalk hub or instrument, route along your preferred path using cable ties or conduits, and connect to the remote device. No tools required beyond basic crimpers for custom terminations if needed.\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePlan your route to avoid high-traffic areas and heat sources.\u003c\/li\u003e\n      \u003cli\u003eSecure with marine-grade clips every 50cm to prevent chafing.\u003c\/li\u003e\n      \u003cli\u003eTest continuity post-install by powering up and verifying data flow across devices.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eFor challenging layouts, like runabouts with tight engine bays, its slim profile glides through narrow passages, making DIY installs a breeze even for weekend warriors.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eLong-Term Reliability in Harsh Conditions\u003c\/h2\u003e\n    \u003cp\u003eMarine environments test every component—salt spray, temperature swings from freezing dawns to scorching afternoons, and relentless wave motion. This cable's materials are selected to outperform standard wiring, with tinned conductors for corrosion resistance and a sheath that flexes without fatigue. Regular visual checks and gentle cleaning with freshwater extend its service life indefinitely.\u003c\/p\u003e\n    \u003cp\u003eOwners report years of uninterrupted service, even on offshore passages where reliability isn't optional.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat devices does this SeaTalk cable connect?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt links SeaTalk-compatible instruments like autopilots, wind instruments, depth sounders, and chartplotters, enabling data sharing across your network.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for saltwater environments?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, its waterproof connectors and corrosion-resistant materials make it ideal for both freshwater and saltwater boating.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use multiple cables in a daisy-chain setup?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—daisy-chaining is standard for SeaTalk, and this cable supports up to the protocol's maximum bus length without degradation.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I know if my system uses SeaTalk?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eCheck for yellow 3-pin connectors on your devices; SeaTalk uses this distinctive plug, unlike NMEA 0183 or newer SeaTalk-ng.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if the cable gets damaged during use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eInspect ends for wear; replace if connectors loosen. Its modular design allows easy swaps without rewiring the entire network.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes length affect signal quality?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAt 20 meters, SeaTalk maintains reliable performance; beyond that, consider repeaters for very long runs.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices does this SeaTalk cable connect?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It links SeaTalk-compatible instruments like autopilots, wind instruments, depth sounders, and chartplotters, enabling data sharing across your network.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for saltwater environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its waterproof connectors and corrosion-resistant materials make it ideal for both freshwater and saltwater boating.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use multiple cables in a daisy-chain setup?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—daisy-chaining is standard for SeaTalk, and this cable supports up to the protocol's maximum bus length without degradation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my system uses SeaTalk?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check for yellow 3-pin connectors on your devices; SeaTalk uses this distinctive plug, unlike NMEA 0183 or newer SeaTalk-ng.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if the cable gets damaged during use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Inspect ends for wear; replace if connectors loosen. Its modular design allows easy swaps without rewiring the entire network.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does length affect signal quality?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"At 20 meters, SeaTalk maintains reliable performance; beyond that, consider repeaters for very long runs.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D288 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D288 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk Interconnect Cable, 65'\u003c\/b\u003e\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk Interconnect cable for linking SeaTalk devices\u003cbr\u003e                                                                          \u003cbr\u003eSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin\u003cbr\u003emolded connectors on each end.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\"RaymarineSea Talk Interconnect Cable, 65 Sea Talk Interconnect cable for linking Sea Talk devices Sea Talk interconnect cable for linking Sea Talk devices. Flat style, 3-pin molded connectors on each end.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14071\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D288\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102367\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579587677,"sku":"14071","price":92.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-20m-seatalk-interconnect-1.jpg?v=1673144897"},{"product_id":"25184-raymarine-seatalk-junction-block","title":"Raymarine SeaTalk Junction Block","description":"3 Way SeaTalk Junction Block\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cdiv class=\"product-header\"\u003e\n    \u003ch1\u003eRaymarine SeaTalk D244 3-Way Junction Block - Professional Marine Electronics Networking Solution\u003c\/h1\u003e\n    \u003cdiv class=\"product-subtitle\"\u003e\n      \u003cstrong\u003eExpand Your SeaTalk Network Connectivity with Raymarine's Proven Marine Electronics Technology\u003c\/strong\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"product-overview\"\u003e\n    \u003cp\u003eThe \u003cstrong\u003eRaymarine D244 SeaTalk Junction Block\u003c\/strong\u003e is an essential networking component designed to expand connectivity in your marine electronics system. This professional-grade 3-way junction block enables seamless integration of multiple SeaTalk devices, creating a robust communication network between your marine instruments, autopilot systems, and displays. Engineered specifically for the demanding marine environment, the D244 ensures reliable data transmission across your boat's electronic systems.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"key-benefits\"\u003e\n    \u003ch2\u003eKey Benefits \u0026amp; Features\u003c\/h2\u003e\n    \u003cul class=\"benefits-list\"\u003e\n      \u003cli\u003e\n\u003cstrong\u003eThree SeaTalk Socket Configuration\u003c\/strong\u003e - Provides three connection points for expanding your SeaTalk network\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Installation\u003c\/strong\u003e - Simple, straightforward connection with no complex wiring required\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction\u003c\/strong\u003e - Built with rugged materials designed for harsh marine conditions\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUniversal SeaTalk Compatibility\u003c\/strong\u003e - Works seamlessly with ST40, ST60 series instruments and Raymarine autopilot systems\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProfessional Reliability\u003c\/strong\u003e - Over 80 years of Raymarine engineering expertise ensures dependable performance\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact Black Housing\u003c\/strong\u003e - Discreet installation that won't interfere with your helm design\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e2-Year Limited Warranty\u003c\/strong\u003e - Backed by Raymarine's comprehensive warranty protection\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"technical-specifications\"\u003e\n    \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n    \u003cdiv class=\"specs-grid\"\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eModel Number:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003eD244\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eConnection Type:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003eSeaTalk® Protocol\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eNumber of Ports:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003e3 SeaTalk Sockets\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eInstallation Type:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003ePlug and Play\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eHousing Color:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003eMarine Black\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eCommunication Method:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003eSeaTalk® Network\u003c\/span\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"spec-item\"\u003e\n        \u003cspan class=\"spec-label\"\u003eUPC Code:\u003c\/span\u003e\n        \u003cspan class=\"spec-value\"\u003e723193100349\u003c\/span\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"compatibility-section\"\u003e\n    \u003ch2\u003eCompatible Systems \u0026amp; Applications\u003c\/h2\u003e\n    \u003cdiv class=\"compatibility-content\"\u003e\n      \u003cp\u003eThe D244 junction block is specifically designed for SeaTalk 1 networks and provides essential connectivity for:\u003c\/p\u003e\n      \u003cul class=\"compatibility-list\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003eST40 Series Instruments\u003c\/strong\u003e - Depth, speed, wind, and multi-function displays\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eST60 Series Instruments\u003c\/strong\u003e - Advanced sailing and powerboat instrumentation\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eRaymarine Autopilot Systems\u003c\/strong\u003e - Seamless integration with all SeaTalk-compatible autopilots\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eLegacy SeaTalk Devices\u003c\/strong\u003e - Maintain connectivity with older Raymarine equipment\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eMulti-Function Displays\u003c\/strong\u003e - Connect compatible chartplotters and navigation systems\u003c\/li\u003e\n      \u003c\/ul\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"installation-guide\"\u003e\n    \u003ch2\u003eInstallation \u0026amp; Setup\u003c\/h2\u003e\n    \u003cdiv class=\"installation-content\"\u003e\n      \u003cp\u003eInstalling the Raymarine D244 junction block is straightforward with its plug-and-play design. The three SeaTalk sockets allow you to create a central hub for your marine electronics network:\u003c\/p\u003e\n      \u003col class=\"installation-steps\"\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePlanning:\u003c\/strong\u003e Determine the optimal location for your junction block, typically in a dry, accessible location near your instrument panel\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e Simply plug your SeaTalk cables into any of the three available sockets\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eNetwork Expansion:\u003c\/strong\u003e Use additional junction blocks to create complex networks as your system grows\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eTesting:\u003c\/strong\u003e Verify all connected instruments communicate properly with your displays and autopilot\u003c\/li\u003e\n      \u003c\/ol\u003e\n      \u003cdiv class=\"installation-note\"\u003e\n        \u003cp\u003e\u003cstrong\u003eProfessional Tip:\u003c\/strong\u003e SeaTalk networks use a parallel connection system with three wires - red (+12V power), yellow (data), and black (ground). The D244 junction block maintains this reliable connection architecture throughout your marine electronics system.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"quality-assurance\"\u003e\n    \u003ch2\u003eRaymarine Quality \u0026amp; Reliability\u003c\/h2\u003e\n    \u003cp\u003eFor over 80 years, Raymarine has been the global leader in high-performance marine electronics for recreational boating and light commercial marine markets. Every D244 junction block is engineered to withstand the demanding marine environment, featuring:\u003c\/p\u003e\n    \u003cul class=\"quality-features\"\u003e\n      \u003cli\u003eCorrosion-resistant materials and connections\u003c\/li\u003e\n      \u003cli\u003eRigorous testing in harsh marine conditions\u003c\/li\u003e\n      \u003cli\u003eIndustry-leading reliability standards\u003c\/li\u003e\n      \u003cli\u003eEasy-to-use design for professional and DIY installation\u003c\/li\u003e\n      \u003cli\u003eComprehensive warranty support and service network\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"warranty-section\"\u003e\n    \u003ch2\u003eWarranty \u0026amp; Support\u003c\/h2\u003e\n    \u003cp\u003eThe Raymarine D244 SeaTalk Junction Block is protected by Raymarine's comprehensive 2-year limited warranty, ensuring your investment in quality marine electronics is protected. This warranty covers manufacturing defects and provides peace of mind for your marine electronics installation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat is SeaTalk and how does the D244 junction block work?\u003c\/h3\u003e\n      \u003cp\u003eSeaTalk is Raymarine's proprietary communication protocol that allows marine instruments to share data. The D244 junction block provides three connection points to expand your SeaTalk network, enabling multiple instruments to communicate with displays, autopilots, and other connected devices.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the D244 compatible with modern NMEA 2000 systems?\u003c\/h3\u003e\n      \u003cp\u003eThe D244 is designed for SeaTalk 1 networks. To integrate with NMEA 2000 systems, you'll need a SeaTalk 1 to NMEA 2000 converter. This allows your legacy SeaTalk instruments to communicate with modern marine electronics.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow many D244 junction blocks can I use in one network?\u003c\/h3\u003e\n      \u003cp\u003eYou can use multiple D244 junction blocks in a single SeaTalk network to create complex instrument configurations. Each junction block adds three additional connection points, allowing for extensive system expansion as your marine electronics needs grow.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat tools are required for installation?\u003c\/h3\u003e\n      \u003cp\u003eThe D244 features plug-and-play installation requiring no special tools. Simply connect your SeaTalk cables to the available sockets. Ensure proper cable management and secure mounting in a dry location for optimal performance.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan I mix different generations of Raymarine instruments on the same network?\u003c\/h3\u003e\n      \u003cp\u003eYes, the D244 junction block maintains compatibility across different generations of SeaTalk-enabled instruments, including ST40 and ST60 series devices, as well as compatible autopilot systems, providing flexibility for system upgrades.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cdiv class=\"product-conclusion\"\u003e\n    \u003cp\u003eThe \u003cstrong\u003eRaymarine D244 SeaTalk Junction Block\u003c\/strong\u003e represents the perfect solution for expanding your marine electronics network with proven reliability and ease of installation. Whether you're upgrading an existing system or building a comprehensive marine electronics package, this professional-grade junction block ensures seamless communication between all your SeaTalk-compatible devices. Trust Raymarine's decades of marine electronics expertise to keep your boat's systems connected and performing at their best.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D244 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Ports: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eType: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003ePlug And Play\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D244 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Use\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D244 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk 3-Way Junction Block\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eJunction block with 3 SeaTalk sockets. \u003cbr\u003e\u003cbr\u003eSeaTalk 3-way connection block. Junction box with 3 SeaTalk sockets. Junction box with 3 SeaTalk sockets. Box size: 1\" H x 4\" W x 7\" L. Weight: 0.1lbs.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-14073\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D244\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193100349\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579620445,"sku":"CWR-14073","price":45.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-seatalk-junction-block-1.jpg?v=1673144903"},{"product_id":"26139-raymarine-cantilever-mounting-socket","title":"Raymarine Cantilever Mounting Socket","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"product-overview\"\u003e\n    \u003ch2\u003eEnhance Your Tiller Autopilot Setup with the Raymarine Cantilever Mounting Socket\u003c\/h2\u003e\n    \u003cp\u003eSecure and reliable mounting is essential for any tiller autopilot system on your boat. The Raymarine cantilever mounting socket provides a sturdy solution for attaching the fixed end of your autopilot to vertical surfaces, such as cockpit sidewalls or bulkheads. Crafted for marine environments, this socket ensures your autopilot stays firmly in place, even in rough seas, allowing you to focus on navigation without constant adjustments.\u003c\/p\u003e\n    \u003cp\u003eUnlike basic brackets, the cantilever design extends the mounting point outward, optimizing space and alignment for smooth tiller operation. It's a go-to choice for sailors upgrading their steering systems or retrofitting older setups on sailboats, dinghies, or small cruisers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eKey Features of the Raymarine D031 Cantilever Mounting Socket\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Built from corrosion-resistant materials to withstand saltwater exposure, UV rays, and constant vibration.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCantilever Extension:\u003c\/strong\u003e Provides necessary offset from the mounting surface, preventing interference with cockpit gear or lines.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecise Fit:\u003c\/strong\u003e Engineered specifically for Raymarine tiller autopilots, ensuring seamless integration without modifications.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact Profile:\u003c\/strong\u003e Low-profile design that blends into your boat's layout, maintaining a clean deck appearance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Adjustability:\u003c\/strong\u003e Allows for fine-tuning angles to match your tiller's pivot point perfectly.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits\"\u003e\n    \u003ch2\u003eWhy Choose the Cantilever Mounting Socket for Your Boat?\u003c\/h2\u003e\n    \u003cp\u003eInstalling this socket transforms your autopilot's performance. It minimizes play and flex, leading to more accurate course-holding and reduced wear on drive components. Sailors report fewer manual corrections during long passages, especially in choppy conditions where standard mounts might shift.\u003c\/p\u003e\n    \u003cp\u003ePerfect for performance-oriented vessels, it supports efficient autopilot response, helping conserve battery life and pilot fatigue. Whether you're racing, cruising, or fishing, this mount delivers the stability needed for reliable hands-free steering.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eStep-by-Step Installation Guide\u003c\/h2\u003e\n    \u003cp\u003eSetting up the Raymarine D031 is straightforward, typically taking under an hour with basic tools. Here's how to get it right:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrepare the Surface:\u003c\/strong\u003e Clean the cockpit sidewall thoroughly and mark the mounting position using your tiller arm as a guide.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDrill Holes:\u003c\/strong\u003e Use the socket's template or measure precisely for pilot holes, ensuring alignment with the autopilot's fixed arm.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSecure the Socket:\u003c\/strong\u003e Fasten with marine-grade stainless steel bolts, applying sealant around holes for waterproofing.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAttach Autopilot:\u003c\/strong\u003e Slide the tiller arm into the socket and tighten the locking mechanism.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTest and Adjust:\u003c\/strong\u003e Power up your autopilot, test in calm water, and tweak angles for optimal tiller sweep.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Always double-check torque specs to avoid over-tightening, which can crack gelcoat.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-maintenance\"\u003e\n    \u003ch2\u003eCompatibility and Maintenance Essentials\u003c\/h2\u003e\n    \u003cp\u003eThis socket pairs seamlessly with popular Raymarine tiller autopilots, including Evolution series and legacy SmartPilot models. Verify your drive unit's arm diameter for a perfect match.\u003c\/p\u003e\n    \u003cp\u003eFor longevity, rinse with fresh water after every sail, inspect fasteners seasonally, and lubricate pivot points with marine grease. This simple routine prevents corrosion and ensures years of trouble-free service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the Raymarine cantilever mounting socket used for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It mounts the fixed end of a tiller autopilot to vertical surfaces like cockpit sidewalls, providing stable support for hands-free steering.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the D031 compatible with all Raymarine autopilots?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine tiller autopilots like the Evolution series. Confirm your drive arm specs for compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I install the cantilever mounting socket?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Mark, drill, bolt to the surface, attach the autopilot arm, and test. Use marine sealant and stainless fasteners for best results.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What materials is the Raymarine D031 made from?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Corrosion-resistant marine-grade alloys that handle saltwater, UV, and vibration without degrading.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this mount be used on horizontal surfaces?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for vertical surfaces like sidewalls. For horizontal mounts, consider Raymarine's alternative brackets.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How often should I maintain the mounting socket?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse after sails, inspect fasteners seasonally, and grease pivots annually for peak performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it add significant weight to my boat?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, its lightweight, compact design keeps added weight minimal, preserving your boat's balance.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the Raymarine cantilever mounting socket used for?\u003c\/summary\u003e\n        \u003cp\u003eIt mounts the fixed end of a tiller autopilot to vertical surfaces like cockpit sidewalls, providing stable support for hands-free steering.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the D031 compatible with all Raymarine autopilots?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for Raymarine tiller autopilots like the Evolution series. Confirm your drive arm specs for compatibility.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I install the cantilever mounting socket?\u003c\/summary\u003e\n        \u003cp\u003eMark, drill, bolt to the surface, attach the autopilot arm, and test. Use marine sealant and stainless fasteners for best results.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat materials is the Raymarine D031 made from?\u003c\/summary\u003e\n        \u003cp\u003eCorrosion-resistant marine-grade alloys that handle saltwater, UV, and vibration without degrading.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan this mount be used on horizontal surfaces?\u003c\/summary\u003e\n        \u003cp\u003eIt's optimized for vertical surfaces like sidewalls. For horizontal mounts, consider Raymarine's alternative brackets.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow often should I maintain the mounting socket?\u003c\/summary\u003e\n        \u003cp\u003eRinse after sails, inspect fasteners seasonally, and grease pivots annually for peak performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it add significant weight to my boat?\u003c\/summary\u003e\n        \u003cp\u003eNo, its lightweight, compact design keeps added weight minimal, preserving your boat's balance.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D031 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D031 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eCantilever Mounting Socket\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUsed to mount the fixed end of the tiller autopilot to a vertical surface such as a cockpit sidewall.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eCantilever mounting socket. Used to mount the fixed end of the joystick autopilot to a vertical surface, such as the side wall of the cockpit.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-15028\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D031\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102046\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677579817053,"sku":"CWR-15028","price":92.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-cantilever-mounting-socket-1.jpg?v=1673144913"},{"product_id":"27641-raymarine-e-series-full-function-remote-keyboard-w-seatalk2","title":"Raymarine E-Series Full Function Remote Keyboard w\/SeaTalk2 Connection","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"features-section\"\u003e\n    \u003ch2\u003eSeamless Control from Anywhere on Board\u003c\/h2\u003e\n    \u003cp\u003ePicture this: you're at the helm on a breezy afternoon, navigating through busy waters, and need to adjust your chartplotter or radar settings without leaving your post. That's where the Raymarine E-Series Full Function Remote Keyboard shines. Designed specifically for E-Series multifunction displays, this rugged remote puts complete command at your fingertips—literally. With its intuitive layout mirroring your main screen, transitioning between controls feels natural, keeping your focus on safe boating rather than fumbling with menus.\u003c\/p\u003e\n    \n    \u003ch3\u003eStandout Features That Deliver Real-World Performance\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFamiliar Interface:\u003c\/strong\u003e Twist 'n' Click dial, dedicated softkeys, and precise cursor pad replicate the E80 and E120 controls for zero learning curve.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAlphanumeric Power:\u003c\/strong\u003e A full 12-key keypad speeds up waypoint entry, route planning, and labeling—perfect for quick customizations during a trip.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Tough Build:\u003c\/strong\u003e IPX6 waterproof rating and UV-resistant materials withstand salt spray, sun, and splashes, whether mounted in a cockpit or pilothouse.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Mounting:\u003c\/strong\u003e Includes cradle for swivel action, flush kit for sleek installs, and a suncover to protect against glare and weather.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eEvery element is engineered for reliability in harsh marine environments, drawing on Raymarine's decades of expertise in networked navigation systems.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-section\"\u003e\n    \u003ch2\u003eEffortless Integration with Your E-Series Setup\u003c\/h2\u003e\n    \u003cp\u003eSeaTalk2 connectivity makes this keyboard a plug-and-play partner for E-Series displays like the E80, E120, or even paired with an M1500 monitor. It taps into your existing network, enabling remote access to radar overlays, fishfinder adjustments, and autopilot commands. No more trekking back to the chart table—control everything from the flying bridge, salon, or wherever duty calls.\u003c\/p\u003e\n    \n    \u003cp\u003eThe included kit covers all bases: 1.5m SeaTalk2 power\/data cables, junction box for clean wiring, two terminators to stabilize signals, and mounting hardware. Network multiple units across your boat for distributed control, enhancing situational awareness vessel-wide.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-benefits\"\u003e\n    \u003ch2\u003eQuick Setup, Lasting Convenience\u003c\/h2\u003e\n    \u003cp\u003eInstallation is straightforward for DIY-savvy boaters. Bracket-mount the cradle near your station, route cables through existing conduits, and connect to your SeaTalk2 backbone. Flush mounting tucks it away for a factory-fresh look. Once powered up, it auto-recognizes your displays, ready to roll in minutes.\u003c\/p\u003e\n    \n    \u003ch3\u003ePro Tips for Optimal Use\u003c\/h3\u003e\n    \u003col\u003e\n      \u003cli\u003ePosition it within easy reach but clear of traffic zones to avoid accidental bumps.\u003c\/li\u003e\n      \u003cli\u003eUse the terminator on unused ports to prevent network glitches.\u003c\/li\u003e\n      \u003cli\u003ePair with Raymarine's repeater displays for a multi-station command center.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003eBoat owners rave about how it transforms cluttered consoles into streamlined hubs, freeing up space for other essentials like binoculars or radios.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"why-choose-section\"\u003e\n    \u003ch2\u003eWhy Serious Boaters Rely on This Remote Keyboard\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine electronics, convenience translates to safety. This isn't just a keypad—it's your extended hand on deck. Weekend cruisers use it for effortless route tweaks; offshore adventurers depend on it for night watches when visibility matters most. Its robust construction outlasts imitators, backed by Raymarine's reputation for gear that performs when conditions turn rough.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\"Switched from cockpit shouting to silent control—game-changer for family cruises.\" – Experienced E-Series user\u003c\/blockquote\u003e\n    \n    \u003cp\u003eElevate your navigation experience beyond basic remotes. This full-function unit handles complex tasks like menu diving and custom pages, ensuring you're always one step ahead of the sea.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this remote keyboard compatible with all Raymarine E-Series displays?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it works seamlessly with E80, E120, and similar E-Series multifunction displays via SeaTalk2. It's also ideal for setups with M1500 monitors or repeaters.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow waterproof is the E-Series remote keyboard?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt boasts an IPX6 rating, protecting against heavy sprays and submersion—built to thrive in open cockpits or exposed helm stations.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat does the package include for installation?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYou'll get a cradle assembly, flush mount kit, suncover, two terminators, 1.5m SeaTalk2 power\/ground cable, junction box, and E-Series SeaTalk2 cable—everything for a complete setup.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I mount it flush or use a bracket?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—hardware for both bracket (with swivel) and flush mounting is included, offering flexibility for any console design.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it support waypoint and route entry?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the 12-key alphanumeric keypad makes entering waypoints, routes, and names quick and intuitive, just like on the main display.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use multiple keyboards on one network?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSeaTalk2 supports multiple remotes on the same network, allowing control from various stations across your boat.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eFull Function Remote Keyboard\u003c\/b\u003e\u003cbr\u003eE-Series Full Function Remote Keyboard with SeaTalk 2 Connection.\u003cbr\u003eControl your E-Series system remotely with the Full Function SeaTalk2 Remote Keyboard. The perfect mate to the M1500 Marine Monitor or your own repeater display, the E-Series Remote Keyboard allows full control of all E-Series functions.\u003cbr\u003e\u003cbr\u003eThe keyboard has the same familiar Twist n' Click, softkeys, and cursor controls as the E80 and E120 displays. Additionally, a full 12 key alphanumeric keypad is included to make entering waypoints, routes, and names fast and easy. \u003cbr\u003e\u003cbr\u003eThis rugged, waterproof keyboard includes all of the hardware to mount it inside or outside. Convenient bracket or flush mounting hardware is included. \u003cbr\u003e \u003cbr\u003ePackage comes with: Cradle assembly, flush mount kit, suncover, terminator (2), seatalk2 power\/rf ground cable 1.5M, junction box, e-series seatalk 2 cable 1.5M\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\"Control your E-Series system remotely with the Full Function Sea Talk2 Remote Keyboard. The perfect mate to the M1500 Marine Monitor or your own repeater display, the E-Series Remote Keyboard allows full control of all E-Series functions. The keyboard has the same familiar Twist n' Click, softkeys, and cursor controls as the E80 and E120 displays. Additionally, a full 12 key alphanumeric keypad is included to make entering waypoints, routes, and names fast and easy. This rugged, waterproof keyboard includes all of the hardware to mount it inside or outside. Convenient bracket or flush mounting hardware is included.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-16530\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E55061\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550618\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677580308573,"sku":"16530","price":361.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-e-series-full-1.jpg?v=1673144949"},{"product_id":"27649-raymarine-seatalk-alarm-output-interface-cable","title":"Raymarine SeaTalk \/ Alarm Output Interface Cable (1.5m)","description":"SeaTalk Alarm Out Cable 1.5m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Integration for Your E-Series Displays\u003c\/h2\u003e\n    \u003cp\u003eEnhance your boating experience with the Raymarine SeaTalk \/ Alarm Output Interface Cable, designed specifically to bridge your E-Series multifunction displays with SeaTalk instrument networks. This 1.5-meter (5-foot) cable ensures reliable data sharing across your onboard systems, from wind sensors and depth sounders to external alarms that alert you to critical conditions like shallow water or engine issues. Its black sheath withstands saltwater exposure, UV rays, and constant vibration, making it a staple for serious mariners who demand uninterrupted connectivity on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eRobust Construction Built for Marine Demands\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable Connectors:\u003c\/strong\u003e Features a secure 6-pin twist-lock connector at the E-Series display end for foolproof attachment, paired with flexible wire leads on the opposite side for straightforward integration into your SeaTalk bus or alarm circuits.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeatherproof Design:\u003c\/strong\u003e Engineered with high-grade materials that resist corrosion and flex fatigue, ensuring long-term performance even in rough seas or prolonged exposure to harsh elements.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Flexible:\u003c\/strong\u003e At just 1.5 meters, it offers the perfect length for clean routing without excess cabling cluttering your helm station.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're upgrading an older E-Series setup or expanding your network with additional instruments, this cable delivers the stability needed for real-time data flow, helping you navigate confidently from coastal cruises to offshore adventures.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEasy Setup and Versatile Applications\u003c\/h2\u003e\n    \u003cp\u003eInstallation is straightforward for DIY boaters or professionals alike. Simply connect the twist-lock end to your E-Series MFD's SeaTalk port, then splice the wire leads into your SeaTalk backbone or external alarm relay. No special tools required beyond basic crimpers and heat-shrink tubing for marine-grade seals. This setup supports bidirectional communication, allowing alarms from your instruments to trigger audible or visual alerts on the display, and vice versa.\u003c\/p\u003e\n    \u003cp\u003eCommon uses include linking autopilot controls, GPS data, and environmental sensors into a unified system. Boaters often pair it with Raymarine iTC5 transducers or ST60+ instruments for a fully interconnected cockpit that boosts situational awareness and safety.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust This Interface Cable\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine electronics, reliability isn't optional—it's essential. This cable stands out by minimizing signal loss over SeaTalk networks, preventing those frustrating data dropouts that can occur with lesser cables. Skip the headaches of intermittent connections during critical moments; instead, enjoy peace of mind knowing your alarms and instruments sync flawlessly.\u003c\/p\u003e\n    \u003cp\u003eFeedback from long-time users highlights its role in simplifying retrofits on vessels with legacy SeaTalk gear, turning complex wiring jobs into quick wins. For competitive anglers or yacht owners, it means more time fishing or sailing, less time troubleshooting.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePro Tips for Optimal Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eRoute the cable away from high-power lines to avoid electrical noise interference.\u003c\/li\u003e\n      \u003cli\u003eUse dielectric grease on connections for extra corrosion protection in saltwater environments.\u003c\/li\u003e\n      \u003cli\u003eTest the full network after installation by simulating alarms to verify end-to-end functionality.\u003c\/li\u003e\n      \u003cli\u003eFor extended networks, consider adding SeaTalk junctions to maintain signal integrity.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What devices is the Raymarine SeaTalk \/ Alarm Output Interface Cable compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's optimized for Raymarine E-Series multifunction displays, connecting them to SeaTalk networks including instruments like depth finders, wind gauges, and external alarms.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the E55054 cable and what are its connectors?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The cable measures 1.5 meters (5 feet) in length, with a 6-pin twist-lock connector on the E-Series end and bare wire leads on the other for custom SeaTalk or alarm wiring.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this cable handle external alarms?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it supports direct connection to external audible or visual alarms, relaying signals from your E-Series display or networked instruments for enhanced safety.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the cable suitable for harsh marine conditions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—its rugged black jacket and connectors are built to endure saltwater, UV exposure, vibration, and temperature extremes common in boating environments.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I install the SeaTalk interface cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Plug the twist-lock into your E-Series SeaTalk port, strip and connect the wire leads to your network backbone or alarm terminals using marine-rated crimps and seals. Test for continuity before full deployment.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it support bidirectional SeaTalk communication?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it enables full data exchange between E-Series displays and SeaTalk devices, including alarms, sensors, and autopilots for a cohesive system.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if I need a longer cable for my setup?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"While 1.5m is ideal for most helm stations, you can extend it safely using SeaTalk extension cables or junction boxes to reach farther instruments without signal degradation.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat devices is the Raymarine SeaTalk \/ Alarm Output Interface Cable compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's optimized for Raymarine E-Series multifunction displays, connecting them to SeaTalk networks including instruments like depth finders, wind gauges, and external alarms.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the E55054 cable and what are its connectors?\u003c\/summary\u003e\n        \u003cp\u003eThe cable measures 1.5 meters (5 feet) in length, with a 6-pin twist-lock connector on the E-Series end and bare wire leads on the other for custom SeaTalk or alarm wiring.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan this cable handle external alarms?\u003c\/summary\u003e\n        \u003cp\u003eYes, it supports direct connection to external audible or visual alarms, relaying signals from your E-Series display or networked instruments for enhanced safety.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the cable suitable for harsh marine conditions?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—its rugged black jacket and connectors are built to endure saltwater, UV exposure, vibration, and temperature extremes common in boating environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I install the SeaTalk interface cable?\u003c\/summary\u003e\n        \u003cp\u003ePlug the twist-lock into your E-Series SeaTalk port, strip and connect the wire leads to your network backbone or alarm terminals using marine-rated crimps and seals. Test for continuity before full deployment.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it support bidirectional SeaTalk communication?\u003c\/summary\u003e\n        \u003cp\u003eYes, it enables full data exchange between E-Series displays and SeaTalk devices, including alarms, sensors, and autopilots for a cohesive system.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat if I need a longer cable for my setup?\u003c\/summary\u003e\n        \u003cp\u003eWhile 1.5m is ideal for most helm stations, you can extend it safely using SeaTalk extension cables or junction boxes to reach farther instruments without signal degradation.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine E55054 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eE-Series Multi Function Display\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine E55054 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With E-Series Multi Function Display\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEngineered To Perform In Extreme Conditions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine E55054 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eSeaTalk \/ Alarm Output Interface Cable (1.5m)\u003cbr\u003e\u003cbr\u003eInterface cable for connecting E-Series displays to Raymarine SeaTalk instrument networks. Also supports connection to external alarm.\u003cbr\u003e\u003cbr\u003e6-Pin twist lock connector a E-Series display end, and wire leads at the other.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRaymarine E55054 is a 1.5m SeaTalk\/Alarm output interface cable. Raymarine E55054 is an interface cable used to connect E series displays to Raymarine SeaTalk...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-16538\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E55054\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550540\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677580832861,"sku":"CWR-16538","price":62.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-seatalk-alarm-output-1.jpg?v=1673144983"},{"product_id":"27685-raymarine-dsm300-to-c-series-interface-cable","title":"Raymarine DSM300 to C-Series Interface Cable - 10M","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnhance your onboard sonar capabilities with the Raymarine DSM300 to C-Series Interface Cable, a reliable 10-meter connection designed for seamless integration between your DSM300 digital sounder module and C-Series multifunction displays. This specialized cable ensures crystal-clear data transmission, letting you access high-resolution sonar images right on your chartplotter screen without signal loss or interference.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy This Interface Cable Stands Out for Marine Enthusiasts\u003c\/h2\u003e\n  \u003cp\u003eIn the demanding marine environment, where moisture, vibration, and constant motion are the norm, standard cables often fall short. This Raymarine cable is engineered with robust shielding and marine-grade connectors that withstand saltwater exposure and rough seas. Boat owners upgrading their fishfinding setup appreciate its plug-and-play simplicity—no custom wiring or soldering required. Whether you're chasing trophy fish in deep waters or navigating coastal shallows, it delivers consistent performance to help you spot structure, bait balls, and game fish with precision.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Benefits for Your Vessel's Electronics Suite\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e At 10 meters, it provides ample length for flexible installation routing around bulkheads, consoles, or deck layouts, reducing clutter and easing access.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuperior Signal Integrity:\u003c\/strong\u003e Twin-axial construction minimizes noise, ensuring your DSM300's powerful 600W sonar output translates to detailed bottom contours and fish arches on the C-Series display.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable Build:\u003c\/strong\u003e UV-resistant jacket and corrosion-proof contacts mean it holds up season after season, even in harsh offshore conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Compatibility:\u003c\/strong\u003e Tailored exclusively for DSM300 pairing with C-Series units, it unlocks full sonar functionality like dual-frequency scanning (50\/200kHz) without adapters.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eInstallation Tips for Optimal Performance\u003c\/h2\u003e\n  \u003cp\u003eGetting this cable up and running is straightforward, but a few pro tips can maximize reliability. Start by powering down your systems to avoid shorts. Route the cable away from high-current lines and engines to dodge electromagnetic interference—think zip ties and conduit for protection. Connect the DSM300 end first (labeled clearly), then plug into the C-Series SeaTalk port. Power up, run the DSM300 setup wizard on your display, and calibrate transducers for your hull type. Pro mariners often add inline fuses for extra safety and test in shallow water before heading out. If echoes seem faint, double-check seating and transducer alignment—common fixes save headaches.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Applications and User Scenarios\u003c\/h2\u003e\n  \u003cp\u003eAnglers on center consoles love how it transforms a basic C80 display into a full-featured sonar station, revealing wrecks and ledges missed by entry-level units. Charter captains integrate it into tournament rigs for competitive edge, while recreational cruisers use it for safer anchoring by mapping seabeds accurately. Pair it with CHIRP transducers for even sharper returns, elevating your entire Raymarine network.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices does the Raymarine DSM300 to C-Series Interface Cable connect?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It specifically links the DSM300 digital sounder module to Raymarine C-Series multifunction displays, enabling sonar data display and control.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the DSM300 to C-Series Interface Cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This cable measures 10 meters, offering sufficient length for most boat installations without excess slack.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for saltwater environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's built with marine-grade materials, including waterproof connectors and UV-resistant shielding, ideal for offshore and inshore use.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need additional adapters for installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No adapters are required—it's a direct plug-and-play interface designed exclusively for DSM300 and C-Series compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this cable improve sonar performance on older C-Series displays?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, it ensures reliable high-speed data transfer, unlocking the DSM300's full potential like dual-frequency operation on C-Series screens.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What should I do if there's no sonar reading after connecting?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check power to the DSM300, verify cable seating, and run the display's sonar setup menu. Ensure the transducer is properly mounted and selected.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the cable shielded against interference?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it features advanced shielding to prevent noise from engines, radios, or other electronics from distorting your sonar images.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat devices does the Raymarine DSM300 to C-Series Interface Cable connect?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt specifically links the DSM300 digital sounder module to Raymarine C-Series multifunction displays, enabling sonar data display and control.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the DSM300 to C-Series Interface Cable?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThis cable measures 10 meters, offering sufficient length for most boat installations without excess slack.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for saltwater environments?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it's built with marine-grade materials, including waterproof connectors and UV-resistant shielding, ideal for offshore and inshore use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need additional adapters for installation?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo adapters are required—it's a direct plug-and-play interface designed exclusively for DSM300 and C-Series compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this cable improve sonar performance on older C-Series displays?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, it ensures reliable high-speed data transfer, unlocking the DSM300's full potential like dual-frequency operation on C-Series screens.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat should I do if there's no sonar reading after connecting?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCheck power to the DSM300, verify cable seating, and run the display's sonar setup menu. Ensure the transducer is properly mounted and selected.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the cable shielded against interference?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it features advanced shielding to prevent noise from engines, radios, or other electronics from distorting your sonar images.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eDSM300 to C-Series Interface Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 10M Interface Cable specifically for the DSM300 to C-Series. \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-16574\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E65011\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193650110\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677580931165,"sku":"16574","price":45.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-dsm300-to-c-1.jpg?v=1673144988"},{"product_id":"36648-raymarine-auxillary-alarm","title":"Raymarine Auxillary Alarm","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003ch2\u003eEnhance Your Boat's Safety with the Raymarine Auxiliary Alarm\u003c\/h2\u003e\n  \u003cp\u003eEvery skipper knows that staying ahead of potential issues on the water is crucial for a safe and enjoyable voyage. The Raymarine Auxiliary Alarm steps in as your reliable sentinel, delivering audible alerts directly from your multifunction display. Perfectly tailored for Raymarine C-Series and E-Series widescreen displays, this compact unit ensures you're never caught off guard by critical notifications like bilge pump failures, high water levels, or engine warnings.\u003c\/p\u003e\n  \n  \u003ch3\u003eKey Features That Stand Out on the Water\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Connects effortlessly to your existing C-Series or E-Series setup, turning visual alarms into unmistakable sounds for immediate awareness.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Marine Build:\u003c\/strong\u003e Engineered to withstand saltwater spray, vibrations, and extreme weather, so it performs flawlessly in the harshest conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eClear Audible Alerts:\u003c\/strong\u003e A piercing buzzer that cuts through engine noise and wind, ensuring you hear every warning loud and clear.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSimple Setup:\u003c\/strong\u003e Minimal wiring required, making it a quick addition even during a busy maintenance day at the dock.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProven Durability:\u003c\/strong\u003e Backed by Raymarine's legacy of tough, long-lasting marine gear trusted by boaters worldwide.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch3\u003eWhy Boaters Rely on This Auxiliary Alarm\u003c\/h3\u003e\n  \u003cp\u003eImagine cruising at dusk when a low battery alert flashes silently on your screen—without an audible cue, it could go unnoticed until it's too late. This alarm changes that by providing instant feedback, letting you focus on navigation while it handles the vigilance. It's not just an accessory; it's peace of mind for solo sailors, families on weekend outings, or commercial operators running tight schedules.\u003c\/p\u003e\n  \n  \u003cp\u003eRaymarine's commitment to innovation shines through in every detail. With over eight decades of marine electronics expertise, they've refined this alarm to complement their full ecosystem of chartplotters, radars, and instruments. Whether you're upgrading an older setup or outfitting a new vessel, it delivers reliability that outpaces the competition.\u003c\/p\u003e\n  \n  \u003ch3\u003eEffortless Installation Tips for Smooth Sailing\u003c\/h3\u003e\n  \u003cp\u003eGetting this alarm up and running is straightforward. Mount it in a convenient spot like near the helm for optimal hearing. It wires directly to the alarm output on your display—no complex programming needed. Test it during your pre-departure checklist to confirm it's ready for action. Pro tip: Pair it with other Raymarine sensors for a comprehensive monitoring network that covers everything from fuel levels to temperature spikes.\u003c\/p\u003e\n  \n  \u003ch3\u003eReal-World Benefits for Every Type of Boater\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSafety First:\u003c\/strong\u003e Prevents oversights that could lead to costly repairs or dangerous situations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended Gear Life:\u003c\/strong\u003e Early warnings protect your electronics and engine from strain.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design:\u003c\/strong\u003e No steep learning curve—install and forget, knowing it's working.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Use:\u003c\/strong\u003e Ideal for sailboats, powerboats, or fishing vessels demanding constant alertness.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eBoat owners rave about how this simple addition transforms their onboard experience, making long trips less stressful and more secure.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What displays is the Raymarine Auxiliary Alarm compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It integrates seamlessly with Raymarine C-Series and E-Series widescreen displays, providing audible alerts from these multifunction units.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does the Auxiliary Alarm improve boating safety?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"By converting silent visual alarms on your display into loud audible signals, it ensures you're alerted to issues like high water or system faults even when not watching the screen.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation of the Raymarine E26033 difficult?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it's designed for easy installation with minimal wiring—just connect to the alarm output on your compatible display and mount in a suitable location.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this alarm withstand marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, it's built with rugged materials to handle saltwater, vibrations, and harsh weather, matching Raymarine's reputation for durability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What types of alarms does it notify for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It responds to various system alarms programmed into your C or E-Series display, such as bilge pumps, battery levels, temperature, and more.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with other Raymarine products?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it complements Raymarine's ecosystem, enhancing alerts from chartplotters, instruments, and sensors for a fully integrated setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How loud is the alarm sound?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The buzzer is piercing enough to be heard over engine noise and wind, ensuring reliability in noisy boating conditions.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eWhat displays is the Raymarine Auxiliary Alarm compatible with?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt integrates seamlessly with Raymarine C-Series and E-Series widescreen displays, providing audible alerts from these multifunction units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eHow does the Auxiliary Alarm improve boating safety?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eBy converting silent visual alarms on your display into loud audible signals, it ensures you're alerted to issues like high water or system faults even when not watching the screen.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eIs installation of the Raymarine E26033 difficult?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, it's designed for easy installation with minimal wiring—just connect to the alarm output on your compatible display and mount in a suitable location.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eCan this alarm withstand marine environments?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, it's built with rugged materials to handle saltwater, vibrations, and harsh weather, matching Raymarine's reputation for durability.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eWhat types of alarms does it notify for?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt responds to various system alarms programmed into your C or E-Series display, such as bilge pumps, battery levels, temperature, and more.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eDoes it work with other Raymarine products?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it complements Raymarine's ecosystem, enhancing alerts from chartplotters, instruments, and sensors for a fully integrated setup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch4 itemprop=\"name\"\u003eHow loud is the alarm sound?\u003c\/h4\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe buzzer is piercing enough to be heard over engine noise and wind, ensuring reliability in noisy boating conditions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine E26033 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine E26033 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eAuxillary Alarm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDesigned for all of the Raymarine C-Series and E-Series displays.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\"RaymarineWhether you're a pro or boating for pleasure, make the most out of your boat and time on the water! Built with the highest quality standards and reliability in mind, every product is designed to suit your specific needs and requirements to maximize your enjoyment on the water.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-25537\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E26033\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193260333\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677581324381,"sku":"CWR-25537","price":58.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-auxillary-alarm-1.jpg?v=1673145046"},{"product_id":"42944-raymarine-1m-pc-serial-data-cable","title":"Raymarine 1M PC Serial Data Cable","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eConnecting your marine electronics to a computer for advanced navigation shouldn't be a hassle. The Raymarine 1M PC Serial Data Cable steps in as a reliable bridge, linking NMEA-enabled GPS receivers or Raymarine systems directly to your PC's serial port. Whether you're running RayTech software for route planning and data logging or simply need to pull position data from your GPS unit, this cable delivers the straightforward connectivity boating professionals trust.\u003c\/p\u003e\n\n  \u003ch2\u003eVersatile Connectivity for Marine Navigation\u003c\/h2\u003e\n  \u003cp\u003eAt one meter long, this cable strikes the perfect balance between reach and tangle-free storage on board. One end features a robust screw-lock DB-9 female connector, ensuring a secure fit into your PC's serial port or compatible interface. The other end terminates in bare wire leads, giving you the flexibility to customize connections to your GPS receiver, Raymarine E85001 interface box, or other NMEA 0183 devices. No more fumbling with adapters—this setup is built for the demands of saltwater environments, with durable construction that resists corrosion and wear.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy It Excels in Real-World Boating Scenarios\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeamless Data Transfer:\u003c\/strong\u003e Effortlessly stream NMEA data like latitude, longitude, speed over ground, and course over ground to your navigation software, enabling precise charting and analysis.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCustom Integration:\u003c\/strong\u003e Bare wire ends allow splicing into various GPS outputs or interface boxes, ideal for custom marine setups on sailboats, powerboats, or fishing vessels.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReliable in Harsh Conditions:\u003c\/strong\u003e Engineered for marine use, it handles vibration, moisture, and temperature swings without signal loss.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpace-Saving Design:\u003c\/strong\u003e Compact length prevents excess cabling cluttering your helm station or below-deck wiring.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eStep-by-Step Connection Guide\u003c\/h2\u003e\n  \u003cp\u003eSetting it up is straightforward, even if you're not an electrical whiz. First, identify the NMEA output wires on your GPS (typically TX for transmit data, GND for ground). Strip the cable's bare ends and connect: DB-9 pin 2 to GPS TX (receive on PC side), pin 5 to GND. Secure with screw-lock for a rock-solid link. Power cycle your devices, launch RayTech or your preferred software, and select the correct COM port. Pro tip: Use a multimeter to verify continuity and polarity before full deployment to avoid frustrating shorts.\u003c\/p\u003e\n\n  \u003ch2\u003eEnhancing Your Setup with Proven Compatibility\u003c\/h2\u003e\n  \u003cp\u003eThis cable shines with Raymarine's ecosystem, particularly alongside the E85001 PC interface box for RayTech users charting complex passages. It also pairs seamlessly with third-party NMEA GPS units from brands common in marine circles, ensuring broad applicability. Mariners often use it to log trips for performance tuning or integrating with older PCs lacking USB-NMEA adapters, keeping legacy systems alive without full upgrades.\u003c\/p\u003e\n\n  \u003ch2\u003eTroubleshooting Tips from Seasoned Boaters\u003c\/h2\u003e\n  \u003cp\u003eSignal dropouts? Check for loose screw-locks or corroded wire connections—marine air loves to accelerate oxidation. No data flow? Confirm baud rate matches (usually 4800 for NMEA) in both GPS and software settings. If your PC lacks a native serial port, pair it with a reliable USB-to-serial converter rated for marine data rates. These quick fixes keep you navigating without downtime.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices does the Raymarine 1M PC Serial Data Cable connect?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It connects NMEA GPS units or Raymarine interfaces like the E85001 to a PC's serial port, ideal for RayTech navigation software.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable require any special tools for installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Basic wire strippers and a screwdriver for the DB-9 screw-lock suffice. No soldering needed unless customizing further.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the cable suitable for outdoor or marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its rugged build withstands moisture, salt, and vibration common on boats.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this with non-Raymarine GPS receivers?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, any standard NMEA 0183 GPS with compatible output wires works.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if my PC doesn't have a serial port?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Use a USB-to-RS232 adapter; ensure it's marine-grade for reliable high-baud data.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable exactly?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Precisely one meter, offering ample reach without excess slack.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support bidirectional data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Primarily for GPS-to-PC data receive; configure for talkers\/listeners as needed in NMEA setups.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat devices does the Raymarine 1M PC Serial Data Cable connect?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt connects NMEA GPS units or Raymarine interfaces like the E85001 to a PC's serial port, ideal for RayTech navigation software.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes this cable require any special tools for installation?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eBasic wire strippers and a screwdriver for the DB-9 screw-lock suffice. No soldering needed unless customizing further.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the cable suitable for outdoor or marine environments?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, its rugged build withstands moisture, salt, and vibration common on boats.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this with non-Raymarine GPS receivers?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, any standard NMEA 0183 GPS with compatible output wires works.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat if my PC doesn't have a serial port?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eUse a USB-to-RS232 adapter; ensure it's marine-grade for reliable high-baud data.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the cable exactly?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrecisely one meter, offering ample reach without excess slack.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it support bidirectional data?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily for GPS-to-PC data receive; configure for talkers\/listeners as needed in NMEA setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003ePC Serial Data Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e1 Meter serial data cable used for connecting computers running RayTech navigation software to the E85001 interface box.  Also used to tie NMEA GPS units to a PC's serial data port.\u003cbr\u003e\u003cbr\u003eThe cable is fitted with a screw-lock DB-9 female connector on one end, and bare wire leads at the other, suitable for connection to your GPS or PC interface. \u003cbr\u003e \u003cbr\u003e\u003cbr\u003ePC serial data cable A 1-meter serial data cable used to connect a computer running RayTech navigation software to the E85001 interface box. It is also used to connect the NMEA GPS unit with...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31833\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E86001\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 023193860015\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677583585373,"sku":"31833","price":17.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-1m-pc-serial-1.jpg?v=1673145115"},{"product_id":"43355-raymarine-digital-radar-cable-15m","title":"Raymarine Digital Radar Cable - 15m","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Vessel's Radar System with the Raymarine 15m Digital Radar Cable\u003c\/h2\u003e\n    \u003cp\u003eEquip your boat with a dependable connection that keeps your radar performing at its peak. The Raymarine 15m Digital Radar Cable (A55078D) delivers seamless signal transmission between your digital dome radar and multifunction display. Crafted for the harsh marine environment, this cable ensures reliable data flow, helping you navigate fog, rain, and night conditions with confidence.\u003c\/p\u003e\n    \u003cp\u003eWhether you're a weekend sailor or a professional mariner, this 15-meter length strikes the perfect balance for installations on mid-sized vessels, offering flexibility without excess cable clutter. Its rugged construction resists saltwater corrosion, UV exposure, and constant vibration, making it a smart upgrade for any Raymarine digital radar setup.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features of the A55078D Cable\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecise Digital Signal Integrity:\u003c\/strong\u003e Optimized for Raymarine's digital radomes, minimizing signal loss over the full 15m length for crystal-clear radar images.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability:\u003c\/strong\u003e Double-shielded construction protects against electromagnetic interference (EMI) and physical wear from deck hardware or waves.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connectors:\u003c\/strong\u003e Factory-fitted Raymarine-specific plugs ensure a secure, watertight fit right out of the box—no custom crimping needed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlexible Length Design:\u003c\/strong\u003e 15m provides ample reach for radar domes mounted on arches, masts, or poles, while keeping your cockpit tidy.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLightweight and Low-Profile:\u003c\/strong\u003e Reduces vessel weight and snag risks, ideal for performance-oriented boats.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility Across Raymarine Digital Radars\u003c\/h2\u003e\n    \u003cp\u003eThis cable pairs effortlessly with a wide array of Raymarine digital dome radars, including popular models like the RD218, RD224, and 4kW\/6kW series. It integrates with Raymarine's Axiom, Axiom Pro, e-Series, c-Series, and g-Series multifunction displays via SeaTalk networking. If your setup includes pathfinder radars or Quantum solid-state options, verify dome compatibility for optimal performance—most digital dome configurations benefit from this reliable link.\u003c\/p\u003e\n    \u003cp\u003eRaymarine's ecosystem shines here: Upgrade from older analog cables without replacing your entire radar, as this digital version supports enhanced features like MARPA target tracking and bird mode for fishing enthusiasts.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eBenefits That Set It Apart for Boaters\u003c\/h2\u003e\n    \u003cp\u003eInvesting in the A55078D means fewer headaches on the water. Skip the frustration of intermittent radar dropouts or fuzzy echoes that plague lesser cables. Mariners report sharper target discrimination and faster refresh rates, crucial for collision avoidance in busy channels or spotting pots and debris at distance.\u003c\/p\u003e\n    \u003cp\u003eIts extended 15m reach suits flybridge yachts, center consoles, and offshore sportfishers where dome placement demands extra cable run. Plus, the robust shielding boosts overall system reliability, potentially extending the life of your radar electronics by reducing noise-induced stress.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation Tips for Seamless Setup\u003c\/h2\u003e\n    \u003cp\u003eRoute the cable along existing conduits or secure it with marine-grade zip ties to avoid chafe points near cleats or windlasses. Connect the dome-end plug first, then feed the cable aft to your display unit, ensuring strain relief at both ends. Test in open water: Power cycle your MFD and radar to confirm solid linkage—no special tools required.\u003c\/p\u003e\n    \u003cp\u003eFor custom runs, use heat-shrink tubing on junctions exposed to spray. Pro tip: Label both ends for quick troubleshooting during annual maintenance.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintaining Peak Performance Over Time\u003c\/h2\u003e\n    \u003cp\u003eInspect connections seasonally for corrosion—wipe with fresh water and dielectric grease if needed. Coil excess length loosely to prevent kinks that could degrade signals. In extreme conditions, like extended bluewater passages, this cable's resilience shines, often outlasting the dome itself.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Raymarine Cables Lead the Pack\u003c\/h2\u003e\n    \u003cp\u003eRaymarine's commitment to innovation dates back decades, with digital radar tech pioneered for real-world reliability. Unlike generic alternatives, the A55078D undergoes rigorous testing for IPX6 waterproofing and flex cycles mimicking years of heaving-to. Boaters trust it for consistent performance that enhances safety without complexity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the Raymarine A55078D cable compatible with all digital dome radars?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it's designed for Raymarine's full range of digital dome radars, including RD series models. Confirm your specific dome for best fit.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What length is the A55078D Digital Radar Cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"This cable measures 15 meters, ideal for most mid-sized boat installations from masthead domes to helm displays.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does this cable support advanced Raymarine features like MARPA?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely. Its digital shielding ensures clean signal transmission, enabling MARPA tracking, fast scan modes, and more.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the cable waterproof and suitable for saltwater use?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, with marine-grade shielding and watertight connectors rated for harsh saltwater, UV, and vibration exposure.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this cable to replace an older analog radar cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's specifically for digital systems. Upgrading from analog requires matching your radar's digital specs for compatibility.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I install the 15m Raymarine radar cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Plug directly into the radar dome and display unit. Route securely, avoiding sharp bends, and test connections on the water.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will this cable work with Raymarine Axiom displays?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it integrates seamlessly with Axiom, Axiom Pro, and other MFDs via SeaTalk or compatible networks.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs the Raymarine A55078D cable compatible with all digital dome radars?\u003c\/h3\u003e\n        \u003cp\u003eYes, it's designed for Raymarine's full range of digital dome radars, including RD series models. Confirm your specific dome for best fit.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat length is the A55078D Digital Radar Cable?\u003c\/h3\u003e\n        \u003cp\u003eThis cable measures 15 meters, ideal for most mid-sized boat installations from masthead domes to helm displays.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes this cable support advanced Raymarine features like MARPA?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely. Its digital shielding ensures clean signal transmission, enabling MARPA tracking, fast scan modes, and more.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs the cable waterproof and suitable for saltwater use?\u003c\/h3\u003e\n        \u003cp\u003eYes, with marine-grade shielding and watertight connectors rated for harsh saltwater, UV, and vibration exposure.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan I use this cable to replace an older analog radar cable?\u003c\/h3\u003e\n        \u003cp\u003eIt's specifically for digital systems. Upgrading from analog requires matching your radar's digital specs for compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I install the 15m Raymarine radar cable?\u003c\/h3\u003e\n        \u003cp\u003ePlug directly into the radar dome and display unit. Route securely, avoiding sharp bends, and test connections on the water.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWill this cable work with Raymarine Axiom displays?\u003c\/h3\u003e\n        \u003cp\u003eYes, it integrates seamlessly with Axiom, Axiom Pro, and other MFDs via SeaTalk or compatible networks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A55078D Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDigital Radar Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 15m Digital Radar Cable for all digital dome radars \u003cbr\u003e\u003cbr\u003eRaymarine's digital radar cable is suitable for dome and array. The product is made of high-quality materials and can provide you with many years of service. Use the most advanced design...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32244\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A55078D\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550786\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584076893,"sku":"32244","price":332.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-digital-radar-cable-1.jpg?v=1673145137"},{"product_id":"43998-raymarine-1-pushrod-extension-f-tiller-pilots","title":"Raymarine 1\u0026quot; Pushrod Extension f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance the reach and precision of your Raymarine tiller pilot with the 1-inch pushrod extension, designed specifically for ST1000 and ST2000 autopilot systems. This compact accessory bridges the gap on boats where the standard pushrod falls short, ensuring smooth, reliable steering assistance even on vessels with deeper cockpits or unique tiller configurations. Sailors often overlook these small adjustments, but they make a big difference in autopilot performance during long passages or choppy conditions.\u003c\/p\u003e\n\n  \u003ch2\u003ePerfect Compatibility for Seamless Integration\u003c\/h2\u003e\n  \u003cp\u003eEngineered exclusively for Raymarine's ST1000 and ST2000 tiller pilots, this extension slots right into your existing setup without modifications. It's ideal for sailboats ranging from dinghies to mid-sized cruisers, where tiller geometry varies. Whether you're retrofitting an older autopilot or fine-tuning a new install, it maintains the system's NMEA compatibility and responsive control, keeping your course steady while you focus on the horizon.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for Marine Endurance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Crafted from corrosion-resistant materials that withstand saltwater spray, UV exposure, and constant vibration—proven in real-world offshore racing and coastal cruising.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e Adds precisely 1 inch to the pushrod length, optimizing leverage for better autopilot authority on larger tillers or when mounting constraints apply.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Adjustment:\u003c\/strong\u003e No tools required beyond basic disassembly, making it a quick fix during a weekend haul-out.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLongevity in Harsh Conditions:\u003c\/strong\u003e Raymarine's reputation for durability means this extension outlasts generic alternatives, reducing downtime and maintenance hassles.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eStep-by-Step Installation Insights\u003c\/h2\u003e\n  \u003cp\u003eInstalling the pushrod extension takes under 15 minutes and enhances your tiller pilot's adaptability. Start by powering down the autopilot and disconnecting the drive unit from the tiller. Unscrew the existing pushrod clevis pin, slide off the arm, and attach the extension before reassembling. Test in calm waters to calibrate the system's gain settings—many users report improved tracking after this tweak, especially in following seas. Pro tip: Lubricate the pivot points with marine grease to minimize wear over thousands of miles.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Applications and Sailor Tips\u003c\/h2\u003e\n  \u003cp\u003eRecreational sailors on Laser or J\/24 class boats frequently use this extension to compensate for tiller extensions or raised mounting brackets. In heavier displacement cruisers like the Catalina 30, it prevents binding during tacks. Pair it with Raymarine's fluxgate compass for dead-reckoning accuracy when GPS signals fade. Regular inspections ensure peak performance; check for play in the joints annually or after heavy weather exposure.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the Raymarine 1-inch pushrod extension used for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It extends the pushrod length by 1 inch on ST1000 and ST2000 tiller pilots, improving fit and performance on boats with non-standard tiller setups or deeper cockpits.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which Raymarine autopilot models is the D003 compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed specifically for Raymarine ST1000 and ST2000 tiller autopilot systems, ensuring a secure and reliable connection.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I install the pushrod extension?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Power off the autopilot, remove the clevis pin, attach the extension to the pushrod, and reassemble. Test in open water for optimal calibration—no special tools needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this extension suitable for all boat types?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Best for tiller-steered sailboats like dinghies, racers, or cruisers where standard pushrod length is insufficient due to mounting height or tiller length.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What materials make this extension durable in marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Constructed from high-grade, corrosion-resistant alloys that handle saltwater, UV, and mechanical stress, matching Raymarine's proven marine-grade standards.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it affect autopilot sensitivity or performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it maintains original sensitivity. Many users recalibrate gain settings post-install for even better response in varied sea states.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does it compare to longer extensions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The 1-inch length provides precise adjustment without overextending leverage, reducing stress on the drive unit compared to longer options.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat is the Raymarine 1-inch pushrod extension used for?\u003c\/h3\u003e\n      \u003cp\u003eIt extends the pushrod length by 1 inch on ST1000 and ST2000 tiller pilots, improving fit and performance on boats with non-standard tiller setups or deeper cockpits.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhich Raymarine autopilot models is the D003 compatible with?\u003c\/h3\u003e\n      \u003cp\u003eDesigned specifically for Raymarine ST1000 and ST2000 tiller autopilot systems, ensuring a secure and reliable connection.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do I install the pushrod extension?\u003c\/h3\u003e\n      \u003cp\u003ePower off the autopilot, remove the clevis pin, attach the extension to the pushrod, and reassemble. Test in open water for optimal calibration—no special tools needed.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this extension suitable for all boat types?\u003c\/h3\u003e\n      \u003cp\u003eBest for tiller-steered sailboats like dinghies, racers, or cruisers where standard pushrod length is insufficient due to mounting height or tiller length.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat materials make this extension durable in marine environments?\u003c\/h3\u003e\n      \u003cp\u003eConstructed from high-grade, corrosion-resistant alloys that handle saltwater, UV, and mechanical stress, matching Raymarine's proven marine-grade standards.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan it affect autopilot sensitivity or performance?\u003c\/h3\u003e\n      \u003cp\u003eNo, it maintains original sensitivity. Many users recalibrate gain settings post-install for even better response in varied sea states.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does it compare to longer extensions?\u003c\/h3\u003e\n      \u003cp\u003eThe 1-inch length provides precise adjustment without overextending leverage, reducing stress on the drive unit compared to longer options.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description-content {\n    line-height: 1.6;\n    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif;\n    max-width: 800px;\n  }\n  .faq-item {\n    margin-bottom: 1.5em;\n    padding: 1em;\n    border-left: 4px solid #007cba;\n    background: #f9f9f9;\n  }\n  .faq-item h3 {\n    margin-top: 0;\n    color: #333;\n  }\n\u003c\/style\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D003 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D003 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D003 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e1\" Pushrod Extension f\/Tiller Pilots\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e1\" pushrod extension for tiller pilots \u003cbr\u003e\u003cbr\u003e\"RaymarineRayMarine Tiller Pilot Accessory - Pushrod ExtensionsExtends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required. The standard horizontal mounting distance from the autopilot mounting socket to the center of the tiller is 23 1\\\/4\\\" (for the 1000+\\\/2000+) and 24 1\\\/2\\\" (for the 4000+).\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32887\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D003\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101896\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584404573,"sku":"CWR-32887","price":40.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-1-pushrod-extension-1.jpg?v=1673145150"},{"product_id":"44000-raymarine-3-pushrod-extension-f-tiller-pilots","title":"Raymarine 3\u0026quot; Pushrod Extension f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"product-overview\"\u003e\n    \u003cp\u003eEnhance your tiller pilot's reach on wider boats with this precision-engineered 3-inch pushrod extension, designed specifically for Raymarine's trusted ST1000 and ST2000 autopilot systems. Whether you're navigating coastal waters or tackling open ocean passages, this accessory bridges the gap between standard drive units and broader hull designs, ensuring seamless autopilot performance without compromising control or responsiveness.\u003c\/p\u003e\n    \n    \u003cp\u003eBoat owners often face the challenge of limited pushrod length on vessels with expansive cockpits or transoms. This extension solves that by adding exactly 3 inches of robust, corrosion-resistant material, maintaining the autopilot's torque and stability even in rough seas. It's a simple upgrade that keeps your boating adventures on course, freeing you to focus on the horizon rather than manual steering.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy This Pushrod Extension Elevates Your Tiller Autopilot Setup\u003c\/h2\u003e\n    \n    \u003cp\u003eRaymarine's engineering shines through in every detail of this component. Crafted from marine-grade materials, it withstands saltwater exposure, UV rays, and relentless wave action—proven in environments from the choppy English Channel to tropical trade winds. Unlike makeshift solutions that introduce flex or failure points, this extension integrates flawlessly, preserving the autopilot's legendary reliability.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Reach for Larger Beams:\u003c\/strong\u003e Perfect for boats where the standard pushrod falls short, allowing full tiller sweep without binding.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUnmatched Durability:\u003c\/strong\u003e Built tougher than generic alternatives, with a design that outlasts harsh conditions season after season.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Integration:\u003c\/strong\u003e Bolts on in minutes using existing hardware—no special tools or modifications required.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind:\u003c\/strong\u003e Backed by Raymarine's commitment to quality, ensuring your investment performs when it matters most.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eInstallers and seasoned sailors rave about how this small addition transforms autopilot usability. On a 30-foot sloop with a wide beam, it eliminated the need for constant adjustments, letting the system hold course through 20-knot gusts effortlessly.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eQuick and Reliable Installation Tips\u003c\/h2\u003e\n    \n    \u003cp\u003eSetting up this pushrod extension is straightforward, even for DIY boaters. Start by powering down your autopilot and securing the tiller in a neutral position. Disconnect the original pushrod from the drive unit and tiller arm, then slide the extension into place—its keyed ends ensure a secure, wobble-free connection. Reattach everything, test the full range of motion, and calibrate as per your ST1000 or ST2000 manual. The whole process typically takes under 30 minutes, getting you back on the water faster.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: Apply a thin layer of marine grease to the joints before assembly to prevent corrosion and ensure smooth operation over time. Regularly inspect connections during routine maintenance to catch any wear early, keeping your system autopilot-ready year-round.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-applications\"\u003e\n    \u003ch2\u003eReal Boating Scenarios Where It Shines\u003c\/h2\u003e\n    \n    \u003cp\u003eImagine single-handing a classic daysailer with a broad transom—without this extension, your tiller pilot might not engage fully, leading to erratic tracking. Or picture a family cruiser on extended voyages; the added length accommodates crew movement while maintaining precise heading control. It's equally valuable for fishing charters or racing setups, where every inch of adjustability counts toward competitive edges or all-day comfort.\u003c\/p\u003e\n    \n    \u003cp\u003eFeedback from waterfront forums highlights its role in upgrading older ST-series pilots, breathing new life into reliable workhorses without a full system replacement. It's not just an add-on; it's a smart extension of your boat's capabilities.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Care for Peak Performance\u003c\/h2\u003e\n    \n    \u003cp\u003eTo maximize lifespan, rinse the extension with fresh water after every saltwater outing and store your boat under cover when possible. Avoid overtightening fasteners, which can stress the materials. In high-use scenarios, like commercial ops, a quick annual lube-up keeps it gliding like new. This proactive approach aligns with Raymarine's rugged ethos, turning a simple part into a lifelong boating ally.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What boats is the Raymarine 3-inch pushrod extension compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine ST1000 and ST2000 tiller pilots, ideal for sailboats and small powerboats with tiller steering and wider beam configurations.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How much length does this extension add to the pushrod?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It provides exactly 3 inches of additional length, sufficient for most boats needing extra reach without overextending the drive unit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation difficult for beginners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it's user-friendly—disconnect, attach, and test in under 30 minutes with basic tools. No wiring or advanced skills needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this extension affect autopilot performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Not at all; it maintains full torque and responsiveness, engineered to preserve the original system's precision and stability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it handle rough sea conditions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—built with marine-grade, corrosion-resistant materials to thrive in harsh environments like heavy swells and saltwater exposure.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the pushrod extension?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water post-use, grease joints annually, and inspect for wear during routine autopilot checks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it fit older Raymarine tiller pilots?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's a direct match for legacy ST1000 and ST2000 models, reviving their usability on modern wider boats.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat boats is the Raymarine 3-inch pushrod extension compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for Raymarine ST1000 and ST2000 tiller pilots, ideal for sailboats and small powerboats with tiller steering and wider beam configurations.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow much length does this extension add to the pushrod?\u003c\/summary\u003e\n        \u003cp\u003eIt provides exactly 3 inches of additional length, sufficient for most boats needing extra reach without overextending the drive unit.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation difficult for beginners?\u003c\/summary\u003e\n        \u003cp\u003eNo, it's user-friendly—disconnect, attach, and test in under 30 minutes with basic tools. No wiring or advanced skills needed.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill this extension affect autopilot performance?\u003c\/summary\u003e\n        \u003cp\u003eNot at all; it maintains full torque and responsiveness, engineered to preserve the original system's precision and stability.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it handle rough sea conditions?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—built with marine-grade, corrosion-resistant materials to thrive in harsh environments like heavy swells and saltwater exposure.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I maintain the pushrod extension?\u003c\/summary\u003e\n        \u003cp\u003eRinse with fresh water post-use, grease joints annually, and inspect for wear during routine autopilot checks.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it fit older Raymarine tiller pilots?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's a direct match for legacy ST1000 and ST2000 models, reviving their usability on modern wider boats.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D005 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D005 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D005 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e3\" Pushrod Extension for Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eExtends the length of tiller autopilot drive systems to accommodate boats of larger beam. \u003cbr\u003e\u003cbr\u003eRAYMARINE Tiller Pilot Pushrod Extension, 3 inches is brand new. RAYMARINE tillage machine test driver push rod extension rack, 3-inch push rod extension rack, 3 inches, MFG D005, used to extend the end...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32889\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D005\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101919\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584437341,"sku":"CWR-32889","price":41.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3-pushrod-extension-1.jpg?v=1673145153"},{"product_id":"44001-raymarine-4-pushrod-extension-f-tiller-pilots","title":"Raymarine 4\u0026quot; Pushrod Extension f\/Tiller Pilots","description":"\u003cdiv class=\"raymarine-extension-content\"\u003e\n\n\u003cp\u003eSteer with confidence on wider-beamed boats by adding the Raymarine 4-inch pushrod extension to your tiller autopilot setup. Designed specifically for compact sailboats and daysailers, this sturdy accessory bridges the gap between your autopilot drive unit and the tiller, ensuring precise control even when cockpit space demands a longer reach. Sailors upgrading from standard configurations often find it transforms their boating experience, allowing seamless autopilot operation without constant manual adjustments during long passages.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Sailors Rely on This Pushrod Extension\u003c\/h2\u003e\n\n\u003cp\u003eIn the demanding world of recreational sailing, every component counts toward reliable performance. This extension isn't just a simple add-on—it's engineered to maintain the autopilot's responsive steering while accommodating boats with beams that exceed the standard pushrod length. Imagine heading out for a coastal cruise or weekend regatta: with the extended reach, your Raymarine tiller pilot stays perfectly aligned, reducing wear on the system and letting you focus on the horizon rather than the helm.\u003c\/p\u003e\n\n\u003cp\u003eBuilt from corrosion-resistant materials that stand up to saltwater spray, UV exposure, and constant motion, it integrates flawlessly with Raymarine's legacy of rugged marine gear. Boaters report smoother tracking in varying winds and waves, making it a smart upgrade for vessels like the Hunter 26 or Catalina 27 where standard setups fall short.\u003c\/p\u003e\n\n\u003ch2\u003eSeamless Compatibility with Proven Tiller Pilots\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eDirect fit for ST1000 and ST2000 series Raymarine tiller autopilots\u003c\/li\u003e\n\u003cli\u003eWorks with common drive units on tiller-steered sailboats up to 28 feet\u003c\/li\u003e\n\u003cli\u003ePreserves original autopilot calibration and NMEA integration\u003c\/li\u003e\n\u003cli\u003eIdeal for retrofitting older models without needing full system overhauls\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eWhether you're maintaining a classic setup or pairing it with modern Raymarine instruments, this extension ensures your autopilot performs as intended, without compatibility headaches.\u003c\/p\u003e\n\n\u003ch2\u003eStep-by-Step Installation for Quick Setup\u003c\/h2\u003e\n\n\u003cp\u003eMost sailors complete the install in under 30 minutes with basic tools—no special skills required. Here's a straightforward guide:\u003c\/p\u003e\n\n\u003col\u003e\n\u003cli\u003ePower down and disconnect your tiller pilot.\u003c\/li\u003e\n\u003cli\u003eRemove the existing pushrod from the drive spindle (usually a simple clevis pin).\u003c\/li\u003e\n\u003cli\u003eAttach the 4-inch extension to the original pushrod using the provided hardware, ensuring secure threading or pinning.\u003c\/li\u003e\n\u003cli\u003eReconnect to the tiller arm, aligning for full travel range.\u003c\/li\u003e\n\u003cli\u003eTest on calm water: engage autopilot in standby, then auto modes to verify smooth operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003ePro tip: Apply marine grease to pivot points for longevity and quieter performance. Always double-check clearances to avoid binding during hard-over turns.\u003c\/p\u003e\n\n\u003ch2\u003eStandout Benefits for Everyday Boating\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eExtends effective steering range for boats with 6- to 8-foot beams\u003c\/li\u003e\n\u003cli\u003eBoosts autopilot precision on wider cockpits, minimizing tiller swing\u003c\/li\u003e\n\u003cli\u003eDurable construction withstands years of offshore adventures\u003c\/li\u003e\n\u003cli\u003ePlug-and-play simplicity reduces downtime and frustration\u003c\/li\u003e\n\u003cli\u003eMaintains the lightweight profile essential for responsive tiller handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eLong-Term Care for Peak Performance\u003c\/h2\u003e\n\n\u003cp\u003eTo keep your extension humming season after season, rinse with fresh water after every saltwater outing and inspect connections annually. Tighten any loose fittings and lubricate joints with a waterproof grease. Avoid over-tightening, which can stress the autopilot's gearing. Paired with regular tiller pilot calibrations, this routine ensures trouble-free voyages, even in rough conditions.\u003c\/p\u003e\n\n\u003cp\u003eSailors who invest in quality extensions like this one often see fewer repairs and more enjoyable time on the water. It's a small tweak with big rewards for autopilot-dependent cruising.\u003c\/p\u003e\n\n\u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n\u003cmeta itemprop=\"headline\" content=\"Raymarine 4-inch Pushrod Extension FAQs\"\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat boats does the Raymarine 4-inch pushrod extension fit?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt's tailored for tiller-steered sailboats up to 28 feet with wider beams, commonly used on models like the J\/24 or Beneteau First 235 when paired with ST1000 or ST2000 autopilots.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes this extension affect autopilot responsiveness?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eNo, it maintains full steering authority and calibration. The design keeps leverage balanced, ensuring quick response times in auto mode.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for beginners?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eAbsolutely—basic tools like pliers and a wrench suffice. Follow the simple steps, and you'll be back sailing the same day.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eHow does it handle rough seas?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eRaymarine's rugged build shines here: corrosion-proof materials and secure joints absorb shocks, supporting reliable steering in choppy waters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eCan it be used with other autopilot brands?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eIt's optimized for Raymarine ST1000\/ST2000 tiller pilots. For other brands, check drive unit specs to ensure matching clevis and length compatibility.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eWhat's the best way to maintain the extension?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eRinse after use, grease pivots yearly, and inspect for wear. This prevents corrosion and ensures smooth operation over multiple seasons.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n\u003ch3 itemprop=\"name\"\u003eDoes it come with a warranty?\u003c\/h3\u003e\n\u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n\u003cp itemprop=\"text\"\u003eYes, backed by Raymarine's standard limited warranty, covering manufacturing defects under normal marine use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D006 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e4 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D006 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D006 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e4\" Pushrod Extension f\/Tiller Pilots\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e4\" pushrod extension for tiller pilots\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\"RaymarineRayMarine Tiller Pilot Accessory - Pushrod ExtensionsExtends the length of the standard pushrod by screwing into its end. Two extensions can be screwed together if extra length is required. The standard horizontal mounting distance from the autopilot mounting socket to the center of the tiller is 23 1\\\/4\\\" (for the 1000+\\\/2000+) and 24 1\\\/2\\\" (for the 4000+).\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32890\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D006\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101926\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584502877,"sku":"CWR-32890","price":39.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-4-pushrod-extension-1.jpg?v=1673145156"},{"product_id":"44002-raymarine-5-pushrod-extension-f-tiller-pilots","title":"Raymarine 5\u0026quot; Pushrod Extension f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot's Reach with the Raymarine Pushrod Extension\u003c\/h2\u003e\n    \u003cp\u003eNavigating wider beams or larger cockpits on your sailboat? The Raymarine 5-inch pushrod extension bridges the gap, ensuring your ST1000 or ST2000 tiller autopilot maintains precise control without compromise. Crafted for the demanding marine world, this accessory extends the drive unit's pushrod, adapting seamlessly to boats where the standard length falls short. Boaters often discover its value during upgrades or when scaling up from smaller vessels, keeping hands-free steering reliable across varying conditions.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-benefits\"\u003e\n    \u003ch2\u003ePerfect Fit for Raymarine Tiller Autopilots\u003c\/h2\u003e\n    \u003cp\u003eDesigned exclusively for Raymarine's ST1000 and ST2000 series tiller pilots, this extension slots in without modifications. It supports boats with beams that demand extra reach, typically from 20 to 35 feet, depending on your setup. The rugged construction mirrors Raymarine's hallmark durability—think corrosion-resistant materials that shrug off saltwater spray, UV exposure, and constant flexing.\u003c\/p\u003e\n    \n    \u003ch3\u003eKey Advantages for Everyday Boaters\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Coverage:\u003c\/strong\u003e Tackle wider transoms effortlessly, preventing binding or sloppy response.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSuperior Control:\u003c\/strong\u003e Maintains autopilot torque and responsiveness, ideal for coastal cruising or longer passages.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eQuick Setup:\u003c\/strong\u003e Bolts on in minutes, no special tools required, getting you back on the water fast.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLong-Term Reliability:\u003c\/strong\u003e Built to endure years of vibration and weather, minimizing downtime.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind:\u003c\/strong\u003e Backed by Raymarine's commitment to quality, aligning with their 2-year limited warranty.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eSimple Installation: Step-by-Step for Confident DIY\u003c\/h2\u003e\n    \u003cp\u003eInstalling the 5-inch pushrod extension is straightforward, even for those new to marine tweaks. Here's how to do it right:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down and disconnect your tiller pilot.\u003c\/li\u003e\n      \u003cli\u003eRemove the existing pushrod from the drive unit and tiller arm—usually just a clevis pin pull.\u003c\/li\u003e\n      \u003cli\u003eAttach the extension to the drive unit end, securing with the provided hardware.\u003c\/li\u003e\n      \u003cli\u003eConnect the free end to your tiller, ensuring alignment for smooth travel.\u003c\/li\u003e\n      \u003cli\u003eReconnect power, calibrate the autopilot, and test in calm waters.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Check tiller pivot points for play before install to optimize performance. Most skippers complete this in under 30 minutes dockside.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"use-cases-maintenance\"\u003e\n    \u003ch2\u003eReal-World Applications and Care Tips\u003c\/h2\u003e\n    \u003cp\u003eFrom weekend racers tweaking for regattas to liveaboard sailors expanding horizons, this extension shines on mid-sized sloops and catamarans. It prevents overextension strain on the drive unit, preserving motor life during autopilot-heavy trips like island-hopping in the Caribbean or Great Lakes crossings.\u003c\/p\u003e\n    \n    \u003ch3\u003eMaintenance for Peak Performance\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eRinse with fresh water after every saltwater outing.\u003c\/li\u003e\n      \u003cli\u003eInspect pins and joints seasonally for wear.\u003c\/li\u003e\n      \u003cli\u003eLubricate pivot points with marine-grade grease.\u003c\/li\u003e\n      \u003cli\u003eAvoid forcing during high winds—let the autopilot disengage safely.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese habits keep it functioning like new, extending the life of your entire tiller pilot system.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Raymarine 5-inch pushrod extension do?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It lengthens the pushrod on ST1000 and ST2000 tiller autopilots, allowing precise steering on boats with wider beams or larger cockpits.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Which Raymarine models is the D007 compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for ST1000 and ST2000 series tiller pilots only, ensuring a secure and reliable fit.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the pushrod extension?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The extension adds exactly 5 inches to the standard pushrod length.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation difficult for beginners?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, it's a simple bolt-on process using basic tools, typically done in 20-30 minutes without prior experience.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will this extension affect my autopilot's warranty?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"As an official Raymarine accessory, it aligns with their 2-year limited warranty when installed correctly.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boat sizes benefit most from this extension?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Ideal for sailboats 20-35 feet with wider transoms where the standard pushrod lacks reach.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I maintain the pushrod extension?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rinse after use in saltwater, inspect joints regularly, and apply marine grease to pivots for longevity.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat does the Raymarine 5-inch pushrod extension do?\u003c\/h3\u003e\n        \u003cp\u003eIt lengthens the pushrod on ST1000 and ST2000 tiller autopilots, allowing precise steering on boats with wider beams or larger cockpits.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhich Raymarine models is the D007 compatible with?\u003c\/h3\u003e\n        \u003cp\u003eIt's designed for ST1000 and ST2000 series tiller pilots only, ensuring a secure and reliable fit.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow long is the pushrod extension?\u003c\/h3\u003e\n        \u003cp\u003eThe extension adds exactly 5 inches to the standard pushrod length.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs installation difficult for beginners?\u003c\/h3\u003e\n        \u003cp\u003eNo, it's a simple bolt-on process using basic tools, typically done in 20-30 minutes without prior experience.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWill this extension affect my autopilot's warranty?\u003c\/h3\u003e\n        \u003cp\u003eAs an official Raymarine accessory, it aligns with their 2-year limited warranty when installed correctly.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat boat sizes benefit most from this extension?\u003c\/h3\u003e\n        \u003cp\u003eIdeal for sailboats 20-35 feet with wider transoms where the standard pushrod lacks reach.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I maintain the pushrod extension?\u003c\/h3\u003e\n        \u003cp\u003eRinse after use in saltwater, inspect joints regularly, and apply marine grease to pivots for longevity.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D007 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D007 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D007 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e5\" Pushrod Extension f\/Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e5\" pushrod extension for tiller pilots\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eRAYMARINE Tiller Pilot Pushrod Extension (5 inches) is brand new. RAYMARINE tiller joystick push rod extension, 5 inch push rod extension, 5 inches, MFG D007, used to extend the end...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32891\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D007\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101933\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584535645,"sku":"CWR-32891","price":41.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-5-pushrod-extension-1.jpg?v=1673145159"},{"product_id":"44003-raymarine-1-tiller-bracket-f-tiller-pilots","title":"Raymarine 1\u0026quot; Tiller Bracket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot Setup with Precision Mounting\u003c\/h2\u003e\n    \u003cp\u003eNavigating challenging waters demands equipment that adapts seamlessly to your boat's unique setup. The Raymarine 1-inch tiller bracket steps in as a game-changer for owners of tiller-steered vessels equipped with ST1000 or ST2000 autopilot systems. This compact accessory bridges height differences between your boat's tiller and the fixed drive end of the tiller pilot, enabling a level, horizontal mount that optimizes performance and control.\u003c\/p\u003e\n    \u003cp\u003eWhether you're cruising coastal waters or tackling offshore passages, this bracket ensures your autopilot engages smoothly without awkward angles or strain. It's crafted from durable marine-grade materials to withstand saltwater corrosion, UV exposure, and the relentless motion of the sea, keeping your steering system reliable trip after trip.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust This Tiller Bracket for Reliable Autopilot Operation\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePerfect Alignment:\u003c\/strong\u003e Compensates for tiller height variations up to 1 inch, promoting even force distribution and reducing wear on your tiller pilot's drive unit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Integration:\u003c\/strong\u003e Designed specifically for Raymarine ST1000 and ST2000 series, it installs in minutes using standard tools—no custom fabrication needed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Engineered with rugged construction that mirrors Raymarine's reputation for gear that endures harsh marine conditions, from pounding waves to extreme temperatures.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePerformance Boost:\u003c\/strong\u003e Maintains the autopilot's responsiveness, allowing precise course-holding even in choppy seas or strong winds.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSpace-Saving Design:\u003c\/strong\u003e Low-profile profile keeps your cockpit clutter-free while maximizing steering efficiency.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Applications for Everyday and Extended Voyages\u003c\/h2\u003e\n    \u003cp\u003eSailors often face tiller height mismatches on older boats or those with custom cockpits. This bracket shines in these scenarios: retrofitting autopilots on classic dinghies, optimizing setups on trailerable sailboats, or fine-tuning high-performance racers. Imagine single-handing a long coastal hop—your tiller pilot holds steady, freeing you to trim sails or scan horizons without constant helm tweaks.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Pair it with routine maintenance checks on your autopilot's ram and feedback linkages for peak longevity. Boaters report fewer mechanical hiccups and smoother autopilot engagement after installation, translating to more enjoyable time on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Installation Guide for Quick Setup\u003c\/h2\u003e\n    \u003cp\u003eGetting this bracket operational is straightforward, even for weekend warriors. Secure it to the tiller pilot's mounting point with provided hardware, then align and clamp to your tiller. Test the full range of motion before heading out—adjust if needed for zero binding. Most users complete the job cockpit-side in under 30 minutes, with no drilling or permanent mods required.\u003c\/p\u003e\n    \u003cp\u003eFor best results, inspect your tiller for smoothness and apply marine grease to pivot points during install. This simple step minimizes friction and extends service life.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFAQ\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What boats is the Raymarine 1-inch tiller bracket compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's tailored for Raymarine ST1000 and ST2000 tiller pilots, ideal for tiller-steered sailboats and small powerboats where height alignment is key.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does this bracket improve tiller pilot performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"By enabling horizontal mounting, it eliminates misalignment from tiller height differences, ensuring even drive force, better course-holding, and reduced component stress.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation difficult for beginners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No—it's user-friendly with simple clamping and bolting. Basic tools suffice, and most setups take less than half an hour without specialized skills.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it handle rough sea conditions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely. Raymarine builds it tough with corrosion-resistant materials suited for saltwater, UV, and heavy impacts, matching their proven marine electronics durability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it add significant weight or bulk to the cockpit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Minimal—its compact 1-inch design is lightweight and low-profile, preserving cockpit space and aesthetics.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will it work if my tiller is sloped or angled?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it specifically addresses vertical offsets, allowing horizontal pilot orientation regardless of tiller slope at the fixed drive end.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the bracket over time?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water after saltwater exposure, inspect hardware seasonally, and lubricate pivots annually for optimal function.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003ch3\u003eCommon Questions Answered\u003c\/h3\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eWhat boats is the Raymarine 1-inch tiller bracket compatible with?\u003c\/h4\u003e\n        \u003cp\u003eIt's tailored for Raymarine ST1000 and ST2000 tiller pilots, ideal for tiller-steered sailboats and small powerboats where height alignment is key.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eHow does this bracket improve tiller pilot performance?\u003c\/h4\u003e\n        \u003cp\u003eBy enabling horizontal mounting, it eliminates misalignment from tiller height differences, ensuring even drive force, better course-holding, and reduced component stress.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eIs installation difficult for beginners?\u003c\/h4\u003e\n        \u003cp\u003eNo—it's user-friendly with simple clamping and bolting. Basic tools suffice, and most setups take less than half an hour without specialized skills.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eCan it handle rough sea conditions?\u003c\/h4\u003e\n        \u003cp\u003eAbsolutely. Raymarine builds it tough with corrosion-resistant materials suited for saltwater, UV, and heavy impacts, matching their proven marine electronics durability.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eDoes it add significant weight or bulk to the cockpit?\u003c\/h4\u003e\n        \u003cp\u003eMinimal—its compact 1-inch design is lightweight and low-profile, preserving cockpit space and aesthetics.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eWill it work if my tiller is sloped or angled?\u003c\/h4\u003e\n        \u003cp\u003eYes, it specifically addresses vertical offsets, allowing horizontal pilot orientation regardless of tiller slope at the fixed drive end.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch4\u003eHow do I maintain the bracket over time?\u003c\/h4\u003e\n        \u003cp\u003eRinse with fresh water after saltwater exposure, inspect hardware seasonally, and lubricate pivots annually for optimal function.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description { font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif; line-height: 1.6; color: #333; max-width: 800px; margin: 0 auto; }\n  .product-description h2 { color: #2c3e50; border-bottom: 2px solid #3498db; padding-bottom: 10px; }\n  .product-description h3 { color: #34495e; }\n  .product-description ul { padding-left: 20px; }\n  .product-description li { margin-bottom: 8px; }\n  .faq-list { margin-top: 20px; }\n  .faq-item { margin-bottom: 20px; padding: 15px; background: #f8f9fa; border-left: 4px solid #3498db; }\n  .faq-item h4 { margin-top: 0; color: #2c3e50; }\n\u003c\/style\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D009 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D009 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D009 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e1\" Tiller Bracket f\/Tiller Pilots\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e1\" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe 1-inch RAYMARINE split iller tiller level adjustment bracket is brand new. RAYMARINE tiller level adjustment bracket, 1 inch tiller level adjustment bracket, 1 inch MFG D009, 1 inch tiller...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32892\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D009\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101957\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584568413,"sku":"CWR-32892","price":63.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-1-tiller-bracket-1.jpg?v=1673145162"},{"product_id":"44004-raymarine-2-tiller-bracket-f-tiller-pilots","title":"Raymarine 2\u0026quot; Tiller Bracket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot Setup with the Raymarine 2-Inch Tiller Bracket\u003c\/h2\u003e\n    \u003cp\u003eNavigating choppy waters or long coastal cruises demands gear that adapts seamlessly to your boat's unique setup. The Raymarine 2-inch tiller bracket (model D010) steps in as the perfect solution for sailors facing height mismatches between their tiller and the tiller pilot's fixed drive end. This compact accessory enables precise horizontal mounting, ensuring your ST1000 or ST2000 autopilot tiller pilot integrates flawlessly without compromising performance or stability.\u003c\/p\u003e\n    \u003cp\u003eUnlike generic brackets that wobble under pressure, this one is precision-engineered for marine rigor—think relentless UV exposure, saltwater spray, and constant vibration. It levels the playing field for tiller-steered vessels, from nimble dinghies to sturdy cruisers, letting your autopilot handle the helm while you focus on the horizon.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy This Bracket Makes a Real Difference Onboard\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSeamless Height Adjustment:\u003c\/strong\u003e Tackles the common frustration of tillers sitting too high or low, allowing straight-line mounting that prevents binding and wear on your pilot's drive unit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRock-Solid Durability:\u003c\/strong\u003e Crafted from corrosion-resistant materials built to withstand years of harsh marine conditions, outlasting cheaper alternatives that rust or fatigue prematurely.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Integration:\u003c\/strong\u003e Designed specifically for Raymarine's ST1000 and ST2000 series, it bolts on without custom fabrication, saving you time and hassle during setup.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBoosted Autopilot Efficiency:\u003c\/strong\u003e Proper alignment reduces strain on the motor, extending operational life and maintaining pinpoint course-holding even in crosswinds or swells.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind Backed by Raymarine:\u003c\/strong\u003e As part of a lineup trusted by generations of boaters, it comes with Raymarine's commitment to reliability, complete with a limited 2-year warranty.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Your Raymarine Tiller Pilot\u003c\/h2\u003e\n    \u003cp\u003eThis 2-inch bracket is tailor-made for Raymarine ST1000 and ST2000 tiller pilots, the workhorses of compact autopilot systems. These pilots are favorites among solo sailors and weekend warriors for their responsive NMEA integration and intuitive controls. Whether you're retrofitting an older setup or upgrading for better responsiveness, the D010 ensures a snug, secure fit that aligns perfectly with your boat's tiller geometry.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Measure your tiller height from the fixed drive point before installing. This bracket shines on boats with vertical tiller variations up to 2 inches, common in designs like Lasers, J\/24s, or custom keelboats.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation: Get Steering in Minutes\u003c\/h2\u003e\n    \u003cp\u003eInstallation is a breeze—no specialized tools or marine yard required. Here's a sailor-tested walkthrough:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eSecure your boat in calm waters and disconnect the tiller pilot power.\u003c\/li\u003e\n      \u003cli\u003ePosition the bracket at the tiller-pilot interface, aligning the 2-inch offset to match height differences.\u003c\/li\u003e\n      \u003cli\u003eMark and drill minimal mounting holes (use stainless steel fasteners for longevity).\u003c\/li\u003e\n      \u003cli\u003eTighten to spec, reattach the pilot, and test in neutral for smooth ram extension.\u003c\/li\u003e\n      \u003cli\u003eCalibrate your autopilot via its setup menu for optimal tracking.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eMost users complete this in under 30 minutes. If your tiller has unique curves, a quick sanding ensures flush contact. Always rinse with fresh water post-install to remove any assembly residues.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Performance and Maintenance Insights\u003c\/h2\u003e\n    \u003cp\u003eSailors report this bracket transforming sluggish autopilot responses into crisp, reliable steering. In beam reaches or following seas, it prevents the \"play\" that plagues misaligned setups, keeping your boat on course without constant tweaks.\u003c\/p\u003e\n    \u003cp\u003eFor upkeep: Inspect fasteners seasonally for tightness, especially after rough passages. A light coat of marine grease on pivot points wards off corrosion, while annual full disassembly checks catch wear early. Paired with Raymarine's ecosystem—like AIS or multifunction displays—it elevates your entire navigation suite.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What boats is the Raymarine 2-inch tiller bracket compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine ST1000 and ST2000 tiller pilots, ideal for tiller-steered sailboats like dinghies, racers, or cruisers with height mismatches up to 2 inches.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this bracket work with non-Raymarine tiller pilots?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for Raymarine ST1000\/ST2000 models. For others, check mounting hole patterns and drive alignment, as custom adapters may be needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my setup needs this 2-inch bracket?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Measure the vertical gap between your tiller's pivot and the pilot's fixed end. If it's around 2 inches higher or lower, this bracket provides the perfect horizontal adjustment.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly for average sailors?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—basic tools like a drill and wrench suffice. Follow a simple 5-step process, and you're underway without professional help.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What maintenance does the bracket require?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Minimal: Check bolts for tightness every few months, apply marine grease to joints annually, and rinse after saltwater exposure to prevent corrosion.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this improve my tiller pilot's performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, proper alignment reduces drive strain, enhances tracking accuracy, and extends motor life, especially in variable sea states.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the warranty on this Raymarine accessory?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It carries Raymarine's limited 2-year warranty, covering defects in materials and workmanship under normal marine use.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat boats is the Raymarine 2-inch tiller bracket compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for Raymarine ST1000 and ST2000 tiller pilots, ideal for tiller-steered sailboats like dinghies, racers, or cruisers with height mismatches up to 2 inches.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this bracket work with non-Raymarine tiller pilots?\u003c\/summary\u003e\n        \u003cp\u003eIt's optimized for Raymarine ST1000\/ST2000 models. For others, check mounting hole patterns and drive alignment, as custom adapters may be needed.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I know if my setup needs this 2-inch bracket?\u003c\/summary\u003e\n        \u003cp\u003eMeasure the vertical gap between your tiller's pivot and the pilot's fixed end. If it's around 2 inches higher or lower, this bracket provides the perfect horizontal adjustment.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for average sailors?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—basic tools like a drill and wrench suffice. Follow a simple 5-step process, and you're underway without professional help.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat maintenance does the bracket require?\u003c\/summary\u003e\n        \u003cp\u003eMinimal: Check bolts for tightness every few months, apply marine grease to joints annually, and rinse after saltwater exposure to prevent corrosion.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill this improve my tiller pilot's performance?\u003c\/summary\u003e\n        \u003cp\u003eYes, proper alignment reduces drive strain, enhances tracking accuracy, and extends motor life, especially in variable sea states.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the warranty on this Raymarine accessory?\u003c\/summary\u003e\n        \u003cp\u003eIt carries Raymarine's limited 2-year warranty, covering defects in materials and workmanship under normal marine use.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D010 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D010 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D010 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e2\" Tiller Bracket f\/Tiller Pilots\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e2\" tiller bracker for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe 2 inch RAYMARINE subiller tiller level adjustment bracket is brand new. RAYMARINE cultivator level adjustment bracket, 2 inch cultivator level adjustment bracket, 2 inch MFG D010, 2 inch cultivator...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32893\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D010\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101964\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584633949,"sku":"CWR-32893","price":63.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-2-tiller-bracket-1.jpg?v=1673145166"},{"product_id":"44005-raymarine-3-tiller-bracket-f-tiller-pilots","title":"Raymarine 3\u0026quot; Tiller Bracket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your tiller pilot setup with the Raymarine 3-inch tiller bracket, a must-have accessory for sailors navigating boats with varying tiller heights. Designed specifically for Raymarine's ST1000 and ST2000 autopilot systems, this bracket bridges the gap when your boat's tiller sits higher or lower than the fixed drive end, enabling secure horizontal mounting for optimal performance.\u003c\/p\u003e\n\n  \u003cp\u003eBoaters often face challenges with tiller alignment on smaller vessels like dinghies, day sailors, or classic designs where the tiller angle doesn't match the autopilot's mounting point. This compact 3-inch bracket solves that by providing the precise elevation adjustment needed, ensuring your tiller pilot operates smoothly without strain on the drive unit or excessive wear on components.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Advantages for Seamless Sailing\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision Alignment:\u003c\/strong\u003e Compensates for tiller height differences up to 3 inches, promoting even force distribution and extending the lifespan of your autopilot.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability:\u003c\/strong\u003e Crafted from corrosion-resistant materials that withstand saltwater exposure, UV rays, and rough handling—proven in demanding offshore conditions.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Setup:\u003c\/strong\u003e Simple bolt-on installation using standard hardware, typically completed in under 30 minutes with basic tools, getting you back on the water faster.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReliable Performance:\u003c\/strong\u003e Maintains the autopilot's responsiveness for autopilot-assisted cruising, fishing runs, or long passages without compromising steering accuracy.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Applications for Tiller Boat Owners\u003c\/h2\u003e\n  \u003cp\u003ePicture this: You're single-handing a 25-foot sloop on a coastal cruise, and your ST2000 tiller pilot is perfectly level thanks to this bracket. No more wrestling with awkward angles that cause binding or unreliable course holding. It's equally ideal for trailerable boats where storage space is tight—the bracket's low-profile design tucks away neatly.\u003c\/p\u003e\n\n  \u003cp\u003eFor competitive racers, the bracket ensures your autopilot integrates flawlessly, allowing focus on tactics rather than manual steering. Weekend warriors appreciate how it simplifies retrofitting older Raymarine systems on restored wooden boats or modern composites, preserving the vintage feel while adding modern automation.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips for Best Results\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003eMeasure the vertical offset between your tiller and drive end to confirm 3-inch suitability.\u003c\/li\u003e\n    \u003cli\u003eSecure the bracket to the tiller extension using included fasteners, ensuring alignment with the pilot's actuator arm.\u003c\/li\u003e\n    \u003cli\u003eTest in calm waters: Engage autopilot in various modes to verify smooth operation and no binding.\u003c\/li\u003e\n    \u003cli\u003eRegularly inspect mounting points for tightness, especially after heavy use or trailering.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003cp\u003eBacked by Raymarine's commitment to quality, this bracket upholds the brand's legacy of rugged, user-friendly marine gear that performs when it counts.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat boats is the Raymarine 3-inch tiller bracket compatible with?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's designed for Raymarine ST1000 and ST2000 tiller pilots, fitting most tiller-steered sailboats and small powerboats up to 35 feet with compatible autopilot setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes this bracket work if my tiller is angled steeply?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it excels in horizontal mounting for tillers higher or lower than the drive end, accommodating common angles on traditional sailboats while keeping the pilot level.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow durable is the bracket in saltwater environments?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eExceptionally tough, made from high-grade, corrosion-resistant alloys that resist rust and fatigue, mirroring Raymarine's standards for harsh marine conditions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for novice boaters?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—requires only basic tools like a wrench and screwdriver. Clear positioning ensures autopilot tracks accurately post-install.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it extend the life of my tiller pilot?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eBy preventing misalignment stress, it reduces wear on the drive mechanism, helping your ST1000 or ST2000 last longer under regular use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat if my offset is more than 3 inches?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eFor larger differences, consider stacking with spacers or consulting Raymarine for extended options to maintain proper geometry.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D011 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D011 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D011 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e3\" Tiller Bracket f\/Tiller Pilots\u003c\/b\u003e \u003cbr\u003e\u003cbr\u003e3\" tiller bracker for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe 3-inch RAYMARINE tiller pilot level adjustment bracket is brand new. RAYMARINE tiller level adjustment bracket, 3 inch tiller level adjustment bracket, 3 inch MFG D011, 3 inch tiller...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32894\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D011\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101971\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584666717,"sku":"CWR-32894","price":63.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3-tiller-bracket-1.jpg?v=1673145169"},{"product_id":"44006-raymarine-4-tiller-bracket-f-tiller-pilots","title":"Raymarine 4\u0026quot; Tiller Bracket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eNavigating the open water with a tiller-steered vessel demands reliable gear that adapts to your boat's unique setup. The Raymarine 4-inch tiller bracket steps in as a game-changer for owners of tiller pilots, tackling those tricky mounting angles where the tiller sits higher or lower than the autopilot's fixed drive end. Crafted from durable marine-grade materials, this bracket ensures a secure, horizontal alignment that keeps your autopilot performing at its peak, no matter the deck configuration.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're tweaking your setup for coastal cruising or prepping for longer passages, this accessory eliminates the guesswork in installation. It promotes smoother operation by maintaining optimal drive geometry, reducing wear on components and enhancing overall steering precision.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy This Bracket Makes a Real Difference on Your Boat\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePerfect Angle Adjustment:\u003c\/strong\u003e Compensates for vertical mismatches between your tiller and the tiller pilot's drive unit, allowing for a level mount that maximizes torque transfer and holding power.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Built to withstand saltwater exposure, UV rays, and constant vibration—essential for marine environments where lesser hardware might fail prematurely.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Retrofit:\u003c\/strong\u003e Designed for quick bolting onto existing tiller pilots, saving you hours of custom fabrication or trial-and-error adjustments.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eImproved Autopilot Efficiency:\u003c\/strong\u003e Horizontal positioning prevents binding or slippage, leading to more accurate course-keeping and less battery drain during extended use.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Fit:\u003c\/strong\u003e Ideal for a range of small to mid-sized sailboats with tiller steering, enhancing compatibility across popular Raymarine autopilot models.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eStep-by-Step Installation for Seamless Setup\u003c\/h2\u003e\n    \u003cp\u003eGetting this bracket in place is straightforward, even for those new to boat rigging. Here's a practical walkthrough:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eSecure your boat in calm waters and disconnect power to the tiller pilot for safety.\u003c\/li\u003e\n      \u003cli\u003ePosition the bracket horizontally against the tiller at the point where the pilot's drive arm connects, marking drill holes for precision.\u003c\/li\u003e\n      \u003cli\u003eFasten with corrosion-resistant bolts (typically included or standard marine hardware), ensuring a snug fit without over-tightening.\u003c\/li\u003e\n      \u003cli\u003eReattach the tiller pilot drive end to the bracket's mounting points, adjusting as needed for free movement.\u003c\/li\u003e\n      \u003cli\u003eTest in neutral: Engage the autopilot on a test run to verify smooth operation and zero interference.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Apply marine grease to pivot points during install to minimize friction and extend service life. Regular checks after a few outings will keep everything running flawlessly.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"use-cases-tips\"\u003e\n    \u003ch2\u003eReal-World Applications and Pro Sailing Tips\u003c\/h2\u003e\n    \u003cp\u003eSailors often overlook mounting nuances until they're mid-voyage, facing erratic autopilot response. This 4-inch bracket shines in scenarios like high-freeboard dinghies, older wooden tillers, or boats with elevated cockpits. It pairs especially well with compact tiller pilots on vessels under 35 feet, where space and leverage are at a premium.\u003c\/p\u003e\n    \n    \u003cp\u003eFor best results:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCombine with cockpit organizers to keep tiller lines clear of the bracket.\u003c\/li\u003e\n      \u003cli\u003eMonitor for play after heavy seas—retighten if needed to maintain alignment.\u003c\/li\u003e\n      \u003cli\u003ePair with wind vane integration for hybrid steering systems that switch effortlessly between manual and auto modes.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eOwners report fewer rudder corrections and steadier headings, translating to less fatigue on long watches. It's not just hardware; it's peace of mind on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is the Raymarine 4-inch tiller bracket best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's optimized for tiller-steered sailboats, particularly those 20-35 feet long where the tiller height doesn't align perfectly with standard tiller pilot mounts. Great for dinghies, racers, and cruisers needing reliable autopilot support.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does this bracket work with all Raymarine tiller pilots?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it's engineered for broad compatibility with Raymarine tiller autopilot series, ensuring a secure fit for most drive unit configurations without modifications.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does the bracket improve tiller pilot performance?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"By enabling horizontal mounting, it aligns the drive arm properly, reducing strain, improving course-holding accuracy, and preventing premature wear on gears and linkages.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation DIY-friendly for average boat owners?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—basic tools like a drill and wrench suffice. The process takes under an hour, with no special skills required beyond standard boating maintenance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this bracket handle rough offshore conditions?\",\n            \"@type\": \"Answer\",\n            \"text\": \"Designed for marine durability, it resists corrosion and vibration from choppy seas, making it reliable for coastal and offshore sailing alike.\"\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What maintenance does the bracket need over time?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rinse with fresh water after saltwater exposure, inspect bolts seasonally, and lubricate pivots annually to ensure long-term performance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will it interfere with tiller movement or cockpit access?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, its compact 4-inch profile mounts flush and low, preserving full tiller swing and easy access for manual steering.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat boats is the Raymarine 4-inch tiller bracket best suited for?\u003c\/summary\u003e\n        \u003cp\u003eIt's optimized for tiller-steered sailboats, particularly those 20-35 feet long where the tiller height doesn't align perfectly with standard tiller pilot mounts. Great for dinghies, racers, and cruisers needing reliable autopilot support.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this bracket work with all Raymarine tiller pilots?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's engineered for broad compatibility with Raymarine tiller autopilot series, ensuring a secure fit for most drive unit configurations without modifications.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow does the bracket improve tiller pilot performance?\u003c\/summary\u003e\n        \u003cp\u003eBy enabling horizontal mounting, it aligns the drive arm properly, reducing strain, improving course-holding accuracy, and preventing premature wear on gears and linkages.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for average boat owners?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—basic tools like a drill and wrench suffice. The process takes under an hour, with no special skills required beyond standard boating maintenance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan this bracket handle rough offshore conditions?\u003c\/summary\u003e\n        \u003cp\u003eDesigned for marine durability, it resists corrosion and vibration from choppy seas, making it reliable for coastal and offshore sailing alike.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat maintenance does the bracket need over time?\u003c\/summary\u003e\n        \u003cp\u003eRinse with fresh water after saltwater exposure, inspect bolts seasonally, and lubricate pivots annually to ensure long-term performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill it interfere with tiller movement or cockpit access?\u003c\/summary\u003e\n        \u003cp\u003eNo, its compact 4-inch profile mounts flush and low, preserving full tiller swing and easy access for manual steering.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003e4\" Tiller Bracket f\/Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e4\" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe RAYMARINE tillage machine driver level adjustment bracket (4 inches) is brand new. RAYMARINE tillage machine level adjustment bracket, 4-inch tiller bracket for ST2000\/4000, 4 inches, MFG D159, can be used for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32895\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D159\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102213\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584732253,"sku":"CWR-32895","price":63.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-4-tiller-bracket-1.jpg?v=1673145171"},{"product_id":"44007-raymarine-5-tiller-bracket-f-tiller-pilots","title":"Raymarine 5\u0026quot; Tiller Bracket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot Setup with the Raymarine 5\" Tiller Bracket\u003c\/h2\u003e\n    \u003cp\u003eNavigating challenging waters demands equipment that adapts seamlessly to your boat's unique setup. The Raymarine 5\" tiller bracket, designed specifically for tiller pilots, addresses one common installation hurdle: mismatched tiller heights. Whether your boat's tiller sits higher or lower than the fixed drive end, this bracket enables precise horizontal mounting, ensuring your autopilot operates smoothly without strain or misalignment.\u003c\/p\u003e\n    \u003cp\u003eCrafted by Raymarine, pioneers in marine electronics with decades of expertise, this accessory embodies rugged durability and straightforward integration. It's an essential upgrade for sailors who rely on ST1000 or ST2000 tiller pilots to maintain course during long passages or when hands-free steering is crucial.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Stand Out on the Water\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Mounting Solution:\u003c\/strong\u003e The 5-inch height perfectly compensates for vertical discrepancies, allowing horizontal alignment for optimal tiller pilot performance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEngineered for Marine Harshness:\u003c\/strong\u003e Built to withstand saltwater corrosion, UV exposure, and constant vibration, ensuring years of reliable service.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design:\u003c\/strong\u003e Simple bolt-on installation minimizes downtime, so you spend more time sailing and less time tinkering.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProven Compatibility:\u003c\/strong\u003e Tailored for Raymarine ST1000 and ST2000 tiller autopilots, integrating flawlessly with your existing system.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLong-Lasting Construction:\u003c\/strong\u003e High-grade materials promote extended lifespan, even in demanding coastal or offshore conditions.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy This Bracket Makes a Real Difference for Boaters\u003c\/h2\u003e\n    \u003cp\u003eImproper autopilot alignment can lead to premature wear, erratic steering, or complete failure at the worst possible moment. This tiller bracket eliminates those risks by providing a stable, level platform for your tiller pilot drive unit. Sailors often report smoother autopilot response, reduced mechanical stress, and enhanced overall system reliability after installation.\u003c\/p\u003e\n    \u003cp\u003eIdeal for small to mid-sized sailboats with tiller steering, it's particularly valuable on vessels where deck geometry or custom modifications create mounting challenges. Pair it with your Raymarine tiller pilot for autopilot precision that feels like an extension of your own steering instincts.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation Tips for Seamless Integration\u003c\/h2\u003e\n    \u003cp\u003eGetting this bracket up and running requires basic tools and minimal expertise:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePosition the bracket to bridge the height gap between your tiller and the pilot's fixed end.\u003c\/li\u003e\n      \u003cli\u003eSecure it firmly using corrosion-resistant fasteners suited to your boat's materials.\u003c\/li\u003e\n      \u003cli\u003eAlign the tiller pilot horizontally, test for smooth movement, and tighten all connections.\u003c\/li\u003e\n      \u003cli\u003eVerify operation in calm waters before heading out.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eMost installations take under an hour, preserving your boating schedule. Always double-check alignments to avoid binding, which could affect steering efficiency.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintenance for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eTo maximize longevity, inspect the bracket seasonally for looseness or corrosion. Rinse with fresh water after saltwater exposure and apply marine-grade lubricant to pivot points as needed. This proactive care ensures your tiller pilot setup remains as reliable as the day it was installed.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is the Raymarine 5\\\" tiller bracket compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for Raymarine ST1000 and ST2000 tiller autopilots, ideal for tiller-steered sailboats where height adjustments are needed.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does this bracket allow horizontal mounting for all tiller positions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, the 5-inch height compensates for tillers higher or lower than the drive unit's fixed end, enabling level horizontal setup.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How durable is this tiller bracket in marine environments?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Raymarine engineers it with rugged, corrosion-resistant materials to handle saltwater, UV rays, and vibrations reliably.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation complicated for beginners?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, it's straightforward with basic tools—typically done in under an hour by aligning and securing to your tiller.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will this bracket improve my tiller pilot's performance?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely, proper alignment reduces wear, enhances steering accuracy, and prevents common misalignment issues.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it be used on boats with custom tillers?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, its adjustable design accommodates various tiller configurations, making it versatile for modified or non-standard setups.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What maintenance does the bracket require?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rinse after saltwater use, inspect fasteners periodically, and lubricate moving parts to ensure long-term reliability.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat boats is the Raymarine 5\" tiller bracket compatible with?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's designed for Raymarine ST1000 and ST2000 tiller autopilots, ideal for tiller-steered sailboats where height adjustments are needed.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes this bracket allow horizontal mounting for all tiller positions?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the 5-inch height compensates for tillers higher or lower than the drive unit's fixed end, enabling level horizontal setup.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow durable is this tiller bracket in marine environments?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRaymarine engineers it with rugged, corrosion-resistant materials to handle saltwater, UV rays, and vibrations reliably.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation complicated for beginners?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, it's straightforward with basic tools—typically done in under an hour by aligning and securing to your tiller.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWill this bracket improve my tiller pilot's performance?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, proper alignment reduces wear, enhances steering accuracy, and prevents common misalignment issues.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it be used on boats with custom tillers?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, its adjustable design accommodates various tiller configurations, making it versatile for modified or non-standard setups.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat maintenance does the bracket require?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRinse after saltwater use, inspect fasteners periodically, and lubricate moving parts to ensure long-term reliability.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D160 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D160 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D160 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e5\" Tiller Bracket f\/Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e5\" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe 5-inch RAYMARINE subiller tiller level adjustment bracket is brand new. RAYMARINE tillage machine level adjustment bracket, 5-inch tiller bracket for ST2000\/4000, 5 inches, MFG D160, can be used for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32896\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D160\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102220\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584863325,"sku":"CWR-32896","price":63.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-5-tiller-bracket-1.jpg?v=1673145174"},{"product_id":"44008-raymarine-1-5-pedestal-socket-f-tiller-pilots","title":"Raymarine 1.5\u0026quot; Pedestal Socket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your tiller pilot setup on smaller sailboats with the Raymarine 1.5-inch pedestal socket, designed specifically to optimize mounting positions for seamless autopilot performance. This compact accessory addresses a common challenge faced by sailors: when the fixed end of your tiller pilot sits lower than the tiller arm, achieving a level horizontal mount becomes tricky. By elevating that connection point precisely 1.5 inches, it ensures smooth operation, reduces strain on the autopilot drive unit, and keeps your steering reliable even in choppy waters.\u003c\/p\u003e\n\n  \u003cp\u003eSailors know that proper alignment is key to autopilot efficiency. Without it, you risk uneven thrust, quicker battery drain, or premature wear. This pedestal socket solves that by providing a sturdy, elevated platform tailored for Raymarine tiller pilots, letting you maintain that critical horizontal orientation effortlessly. It's a small addition with big impacts on your on-water adventures, whether you're single-handing a coastal cruise or tweaking your setup for offshore passages.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Every Tiller Pilot Owner Needs This Pedestal Socket\u003c\/h2\u003e\n  \u003cp\u003eThink of your tiller pilot as the unsung hero of hands-free sailing. But heroes need the right support. This 1.5-inch pedestal raises the fixed mounting end just enough to align perfectly with your tiller arm, preventing binding or misalignment that can throw off performance. Crafted from marine-grade materials, it withstands saltwater corrosion, UV exposure, and the constant vibration of a heaving deck.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision Elevation:\u003c\/strong\u003e Exactly 1.5 inches to match common tiller geometries without over-raising.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRock-Solid Stability:\u003c\/strong\u003e Locks securely to your boat's cockpit structure, minimizing flex under load.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUniversal Fit for Raymarine:\u003c\/strong\u003e Works seamlessly with popular tiller autopilot models, ensuring plug-and-play compatibility.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow-Profile Design:\u003c\/strong\u003e Keeps your cockpit clutter-free while delivering functional height.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eSimple Installation for Quick Upgrades\u003c\/h2\u003e\n  \u003cp\u003eOne of the joys of marine gear is when it's as easy to install as it is effective. You'll appreciate how this pedestal socket bolts on in minutes—no special tools or boat yard visits required. Start by identifying your tiller pilot's fixed mounting point. Clean the surface, position the socket, and secure with the provided hardware. Test the alignment by swinging the tiller full range; adjustments are rare thanks to its thoughtful engineering. Pro tip: Apply a marine sealant around the base for extra waterproofing in high-splash areas like the cockpit sole.\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003eLocate and prep the mounting surface.\u003c\/li\u003e\n    \u003cli\u003eAlign socket with tiller pilot base.\u003c\/li\u003e\n    \u003cli\u003eTighten fasteners evenly.\u003c\/li\u003e\n    \u003cli\u003eVerify horizontal tiller pilot position.\u003c\/li\u003e\n    \u003cli\u003eGo sailing with confidence.\u003c\/li\u003e\n  \u003c\/ol\u003e\n\n  \u003ch2\u003eReal-World Benefits for Serious Sailors\u003c\/h2\u003e\n  \u003cp\u003eBeyond specs, this socket shines in practical scenarios. On a gunkholing day trip, it keeps your autopilot humming without recalibration after every tack. For longer hauls, the reduced mechanical stress means fewer breakdowns and more time enjoying the horizon. It's especially handy on boats with low transoms or curved coamings where standard mounts fall short. Users report smoother course-holding, especially in following seas, and noticeable extension of tiller pilot lifespan.\u003c\/p\u003e\n  \u003cp\u003ePair it with routine maintenance like checking ram linkages seasonally, and you'll have a setup that's as dependable as your sea boots.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat boats is the Raymarine 1.5-inch pedestal socket best suited for?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's ideal for tiller-steered sailboats under 35 feet, like dinghies, day sailors, or small cruisers where cockpit geometry makes standard tiller pilot mounting awkward. Perfect for raising the fixed end without major modifications.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes this pedestal socket work with all Raymarine tiller pilots?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it's engineered for Raymarine tiller autopilot models. It raises the fixed mounting point by 1.5 inches, ensuring compatibility across their lineup for horizontal alignment.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow much height does it actually add?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrecisely 1.5 inches (38mm) from base to top mounting surface, enough to level most setups without excessive lift that could affect balance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for average sailors?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—bolts on with basic tools in under 15 minutes. No drilling required if matching existing holes, and it's forgiving for slight misalignments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWill this improve my tiller pilot's performance?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, by enabling true horizontal mounting, it reduces drive unit strain, improves responsiveness, and enhances holding power in varying conditions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I maintain the pedestal socket long-term?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRinse with fresh water after saltwater exposure, inspect fasteners annually, and reapply sealant as needed. It's built tough but thrives with basic care.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it handle rough offshore conditions?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eDefinitely—made from corrosion-resistant materials proven in harsh marine environments, it stays secure through pounding waves and heavy weather.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What boats is the Raymarine 1.5-inch pedestal socket best suited for?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's ideal for tiller-steered sailboats under 35 feet, like dinghies, day sailors, or small cruisers where cockpit geometry makes standard tiller pilot mounting awkward. Perfect for raising the fixed end without major modifications.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does this pedestal socket work with all Raymarine tiller pilots?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it's engineered for Raymarine tiller autopilot models. It raises the fixed mounting point by 1.5 inches, ensuring compatibility across their lineup for horizontal alignment.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How much height does it actually add?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Precisely 1.5 inches (38mm) from base to top mounting surface, enough to level most setups without excessive lift that could affect balance.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is installation DIY-friendly for average sailors?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely—bolts on with basic tools in under 15 minutes. No drilling required if matching existing holes, and it's forgiving for slight misalignments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Will this improve my tiller pilot's performance?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, by enabling true horizontal mounting, it reduces drive unit strain, improves responsiveness, and enhances holding power in varying conditions.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How do I maintain the pedestal socket long-term?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Rinse with fresh water after saltwater exposure, inspect fasteners annually, and reapply sealant as needed. It's built tough but thrives with basic care.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can it handle rough offshore conditions?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Definitely—made from corrosion-resistant materials proven in harsh marine environments, it stays secure through pounding waves and heavy weather.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D026 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1-1\/2 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D026 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D026 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e1.5\" Pedestal Socket For Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe 1.5-inch RAYMARINE sub-iller test driver base assembly is brand new. RAYMARINE cultivator test base assembly, 1.5-inch 1.5-inch base assembly, MFG D026, 1.5-inch subtill...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32897\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D026\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101995\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584928861,"sku":"CWR-32897","price":94.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-1-5-pedestal-1.gif?v=1673145177"},{"product_id":"44009-raymarine-2-pedestal-socket-f-tiller-pilots","title":"Raymarine 2\u0026quot; Pedestal Socket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnhance your sailing setup with the Raymarine 2\" Pedestal Socket, designed specifically for tiller pilots. This essential accessory allows for secure horizontal mounting when the fixed end of your tiller pilot sits lower than the tiller arm, ensuring stable autopilot performance on smaller vessels like dinghies, daysailers, and trailerable sailboats. Boaters trust it for its straightforward integration with Raymarine autopilot systems, delivering reliable hands-free steering even in choppy waters.\u003c\/p\u003e\n  \n  \u003ch2\u003ePerfect Fit for Raymarine Tiller Pilots\u003c\/h2\u003e\n  \u003cp\u003eCrafted for seamless compatibility with Raymarine boat autopilot tillers, this 2-inch pedestal socket raises the fixed mounting point to align perfectly with your tiller arm. No more awkward angles or compromised control—simply achieve a level, horizontal installation that optimizes the pilot's drive unit positioning. Ideal for sailors who prioritize precision and ease during extended cruises or competitive racing.\u003c\/p\u003e\n  \n  \u003ch2\u003eBuilt for the Demands of Marine Life\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Engineered with marine-grade materials that withstand saltwater corrosion, UV exposure, and relentless wave impacts, ensuring longevity season after season.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProven Reliability:\u003c\/strong\u003e Raymarine's heritage in high-performance marine electronics means this socket performs flawlessly in harsh conditions, from coastal hops to offshore adventures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design:\u003c\/strong\u003e Its compact 2-inch height minimizes cockpit clutter while providing the elevation needed for optimal tiller pilot operation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Setup:\u003c\/strong\u003e Bolt-on installation requires minimal tools and time, letting you get back on the water faster without complex modifications.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch2\u003eWhy This Pedestal Socket Elevates Your Autopilot Experience\u003c\/h2\u003e\n  \u003cp\u003eStruggling with tiller pilot misalignment? This socket solves common mounting challenges on boats where transom space or geometry limits standard setups. It promotes smoother autopilot response, reduces wear on the drive unit, and enhances overall steering efficiency. Sailors report fewer adjustments needed underway, freeing you to focus on navigation, sail trim, and enjoying the journey. Pair it with your existing Raymarine tiller pilot for a cohesive system that's as tough as it is intuitive.\u003c\/p\u003e\n  \n  \u003ch2\u003eReal-World Applications for Everyday Boaters\u003c\/h2\u003e\n  \u003cp\u003eWhether you're single-handing a weekend sail, teaching new crew on a family outing, or pushing limits in regattas, this pedestal socket delivers consistent performance. It's particularly valuable on lightweight boats where every ounce and inch matters, preventing vibrations that could disrupt autopilot accuracy in following seas or gusty winds.\u003c\/p\u003e\n  \n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat boats is the Raymarine 2\" Pedestal Socket compatible with?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's designed for Raymarine tiller pilots on sailboats with tiller steering, such as small keelboats, catamarans, and dinghies up to around 35 feet, where the fixed pilot end needs elevation for horizontal alignment.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does this socket improve tiller pilot mounting?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt raises the pedestal by 2 inches, allowing horizontal positioning when the mounting point is lower than the tiller arm, which prevents binding, improves leverage, and enhances autopilot efficiency.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation difficult for beginners?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo—it's a simple bolt-on process using standard marine hardware. Most users complete it in under 30 minutes with basic tools like a drill and wrench.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it handle rough sea conditions?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely. Raymarine builds it to endure extreme marine environments, including heavy spray, shocks from waves, and temperature swings, matching the durability of their full autopilot lineup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with non-Raymarine tiller pilots?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eWhile optimized for Raymarine models, it may fit others with matching 2-inch pedestal bases—check your pilot's specs for compatibility to ensure secure mounting.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat maintenance does the pedestal socket require?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRinse with fresh water after saltwater exposure and inspect fasteners seasonally. Its corrosion-resistant design means minimal upkeep for years of service.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What boats is the Raymarine 2\\\" Pedestal Socket compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine tiller pilots on sailboats with tiller steering, such as small keelboats, catamarans, and dinghies up to around 35 feet, where the fixed pilot end needs elevation for horizontal alignment.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does this socket improve tiller pilot mounting?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It raises the pedestal by 2 inches, allowing horizontal positioning when the mounting point is lower than the tiller arm, which prevents binding, improves leverage, and enhances autopilot efficiency.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation difficult for beginners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No—it's a simple bolt-on process using standard marine hardware. Most users complete it in under 30 minutes with basic tools like a drill and wrench.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it handle rough sea conditions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely. Raymarine builds it to endure extreme marine environments, including heavy spray, shocks from waves, and temperature swings, matching the durability of their full autopilot lineup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with non-Raymarine tiller pilots?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"While optimized for Raymarine models, it may fit others with matching 2-inch pedestal bases—check your pilot's specs for compatibility to ensure secure mounting.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What maintenance does the pedestal socket require?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water after saltwater exposure and inspect fasteners seasonally. Its corrosion-resistant design means minimal upkeep for years of service.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D027 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D027 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D027 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e2\" Pedestal Socket For Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eFeatures: The base socket of the 2\" joystick guide allows the joystick guide to be installed horizontally when the fixed end of the joystick is lower than the joystick arm.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32898\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D027\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102008\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677584994397,"sku":"CWR-32898","price":92.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-2-pedestal-socket-1.gif?v=1673145180"},{"product_id":"44010-raymarine-2-5-pedestal-socket-f-tiller-pilots","title":"Raymarine 2.5\u0026quot; Pedestal Socket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot Setup with Precision Mounting\u003c\/h2\u003e\n    \u003cp\u003eNavigating open waters demands equipment that stands up to relentless waves, salt spray, and shifting conditions. That's where the Raymarine pedestal socket shines, offering a sturdy 2.5-inch elevated mount designed specifically for tiller pilots. This clever accessory addresses a common challenge: when the fixed end of your autopilot sits lower than the tiller arm, achieving that perfect horizontal alignment can be tricky. By raising the pedestal end securely, it ensures smooth, reliable operation, keeping your course steady without constant adjustments.\u003c\/p\u003e\n    \u003cp\u003eBoaters who rely on Raymarine's proven tiller pilots—think compact systems perfect for sailboats and smaller vessels—appreciate how this socket transforms setup. No more makeshift solutions or compromised performance; it's a seamless fit that integrates with your existing gear, promoting effortless steering automation on long passages or casual day sails.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Advantages for Serious Boaters\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Crafted from marine-grade materials, it withstands corrosive saltwater, UV exposure, and heavy vibrations—essential for gear that lives outside year-round.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Alignment:\u003c\/strong\u003e Elevates the tiller pilot's fixed point by 2.5 inches, enabling horizontal mounting and optimal thrust vector for precise autopilot response.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eQuick and Simple Installation:\u003c\/strong\u003e Bolt-on design means minimal tools and time; secure it to your cockpit pedestal or bulkhead in under 30 minutes, even solo.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLong-Term Reliability:\u003c\/strong\u003e Engineered to complement Raymarine's rugged autopilot lineage, reducing wear on drive units and extending overall system life.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Tailored for Raymarine tiller pilots, ensuring a plug-and-play match with popular models used on everything from dinghies to coastal cruisers.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're upgrading an older setup or outfitting a new boat, this pedestal socket delivers the stability that lets you focus on the horizon, not the helm.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eInstallation Tips for Flawless Performance\u003c\/h2\u003e\n    \u003cp\u003eGetting it right from the start maximizes your investment. Start by identifying the mounting spot on your pedestal or suitable flat surface—aim for a position that keeps the tiller pilot clear of sheets and crew traffic. Use corrosion-resistant stainless steel fasteners (not included) for a bombproof hold. Once mounted, test the full range of tiller movement to confirm unobstructed swing. Pair it with your Raymarine tiller pilot, calibrate the autopilot per the manual, and you're set for hands-free cruising.\u003c\/p\u003e\n    \u003cp\u003ePro tip: In high-vibration areas like near the engine, add a touch of marine sealant around bolt holes to prevent loosening over time. Regular inspections during routine maintenance keep everything humming season after season.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust Raymarine Mounts\u003c\/h2\u003e\n    \u003cp\u003eRaymarine has powered adventures for decades with electronics that punch above their weight in reliability. This pedestal socket embodies that heritage: compact yet tough, intuitive to use, and built for the real world of boating. It's not just a mount—it's the foundation for autopilot confidence, letting skippers enjoy safer, more efficient voyages. From weekend warriors to bluewater sailors, those who install it report fewer mechanical tweaks and more time under sail.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What does the Raymarine 2.5-inch pedestal socket do?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It raises the fixed end of Raymarine tiller pilots by 2.5 inches, allowing horizontal mounting when the pedestal is lower than the tiller arm for optimal autopilot alignment.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this socket compatible with all Raymarine tiller pilots?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it's designed for Raymarine boat autopilot tiller pilots, fitting models commonly used on sailboats and small powerboats.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I install the pedestal socket?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Secure it to a cockpit pedestal or flat surface using stainless steel bolts. Test tiller swing and calibrate your autopilot afterward—no special tools required.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will it hold up in harsh marine conditions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—made from rugged, corrosion-resistant materials proven in saltwater, UV, and vibration-heavy environments.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it come with a warranty?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It includes Raymarine's standard limited warranty, covering defects for peace of mind.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this socket improve my tiller pilot's performance?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, by ensuring proper horizontal alignment, it reduces strain on the drive unit, leading to smoother operation and longer lifespan.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What size boat is this best for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Ideal for tiller-steered boats up to 35 feet, like sailboats and trailers, where compact autopilots thrive.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat does the Raymarine 2.5-inch pedestal socket do?\u003c\/h3\u003e\n        \u003cp\u003eIt raises the fixed end of Raymarine tiller pilots by 2.5 inches, allowing horizontal mounting when the pedestal is lower than the tiller arm for optimal autopilot alignment.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs this socket compatible with all Raymarine tiller pilots?\u003c\/h3\u003e\n        \u003cp\u003eYes, it's designed for Raymarine boat autopilot tiller pilots, fitting models commonly used on sailboats and small powerboats.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I install the pedestal socket?\u003c\/h3\u003e\n        \u003cp\u003eSecure it to a cockpit pedestal or flat surface using stainless steel bolts. Test tiller swing and calibrate your autopilot afterward—no special tools required.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWill it hold up in harsh marine conditions?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely—made from rugged, corrosion-resistant materials proven in saltwater, UV, and vibration-heavy environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes it come with a warranty?\u003c\/h3\u003e\n        \u003cp\u003eIt includes Raymarine's standard limited warranty, covering defects for peace of mind.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan this socket improve my tiller pilot's performance?\u003c\/h3\u003e\n        \u003cp\u003eYes, by ensuring proper horizontal alignment, it reduces strain on the drive unit, leading to smoother operation and longer lifespan.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat size boat is this best for?\u003c\/h3\u003e\n        \u003cp\u003eIdeal for tiller-steered boats up to 35 feet, like sailboats and trailers, where compact autopilots thrive.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description-content {\n    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif;\n    line-height: 1.6;\n    color: #333;\n    max-width: 800px;\n  }\n  h2, h3 {\n    color: #2c3e50;\n    border-bottom: 2px solid #3498db;\n    padding-bottom: 0.5rem;\n  }\n  ul {\n    padding-left: 1.5rem;\n  }\n  li {\n    margin-bottom: 0.5rem;\n  }\n  .faqs-section {\n    margin-top: 3rem;\n  }\n  .faq-item {\n    margin-bottom: 1.5rem;\n    padding: 1rem;\n    background: #f8f9fa;\n    border-left: 4px solid #3498db;\n  }\n  .faq-item h3 {\n    margin-top: 0;\n    border-bottom: none;\n  }\n  @media (max-width: 768px) {\n    .product-description-content {\n      padding: 0 1rem;\n    }\n  }\n\u003c\/style\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D028 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2-1\/2 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D028 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D028 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e2.5\" Pedestal Socket For Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe pilot base assembly of the 2.5-inch RAYMARINE tiller is brand new. RAYMARINE cultivator test base assembly, 2.5-inch 2.5-inch base assembly, MFG D028, 2.5-inch subtill...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32899\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D028\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102015\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585059933,"sku":"CWR-32899","price":92.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-2-5-pedestal-1.gif?v=1673145183"},{"product_id":"44011-raymarine-3-pedestal-socket-f-tiller-pilots","title":"Raymarine 3\u0026quot; Pedestal Socket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Pilot Setup with the Raymarine 3-Inch Pedestal Socket\u003c\/h2\u003e\n    \u003cp\u003eNavigating open waters demands precision and reliability, especially when relying on autopilot systems like tiller pilots. The Raymarine 3-inch pedestal socket steps in as a game-changer for sailors facing mounting challenges. Designed specifically to elevate the fixed end of your tiller pilot, this accessory ensures a horizontal alignment even when the tiller arm sits higher. No more awkward angles or strained mechanics—just smooth, efficient operation that keeps you on course during long passages.\u003c\/p\u003e\n    \u003cp\u003eCrafted from durable marine-grade materials, it withstands the relentless assault of saltwater spray, UV exposure, and constant vibrations. Boaters who’ve struggled with low mounting points on compact sailboats or retrofits rave about how this simple addition transforms their autopilot performance, reducing wear and boosting responsiveness.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Choose This Pedestal Socket for Your Raymarine Tiller Pilot?\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePerfect Alignment:\u003c\/strong\u003e Raises the pilot's fixed end by 3 inches, enabling level mounting where space is tight or geometry doesn't cooperate.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBuilt for Harsh Conditions:\u003c\/strong\u003e Engineered to endure the marine environment, from pounding waves to extreme weather, ensuring years of dependable service.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Integration:\u003c\/strong\u003e Matches seamlessly with Raymarine tiller pilots, preserving the system's intuitive controls and autopilot accuracy.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Sturdy:\u003c\/strong\u003e At just 3 inches tall, it provides the lift you need without cluttering your cockpit or adding unnecessary weight aloft.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind:\u003c\/strong\u003e Backed by Raymarine's commitment to quality, it integrates into a lineup trusted by sailors worldwide for critical navigation tasks.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're single-handing a coastal cruiser or pushing offshore, this pedestal socket eliminates common frustrations, letting your tiller pilot perform at its peak.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation for Quick Upgrades\u003c\/h2\u003e\n    \u003cp\u003eGetting this pedestal socket up and running is straightforward, minimizing downtime on the water. Start by identifying your tiller pilot's fixed mounting point. Secure the socket using the provided hardware—typically just a few bolts into a solid deck or bulkhead surface. Align it to raise the pilot precisely 3 inches, then reattach your tiller pilot arm. Test the full range of motion to confirm smooth travel without binding.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Apply marine sealant around the base for extra waterproofing, and double-check torque specs to handle the autopilot's thrust. Most installations wrap up in under an hour, even for those new to marine hardware tweaks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eIdeal Applications for Sailors and Powerboaters\u003c\/h2\u003e\n    \u003cp\u003eThis accessory shines on tiller-steered vessels where deck geometry poses issues. Compact dinghies, daysailers, and performance racers benefit most, as do older boats retrofitting modern autopilots. It prevents the pilot from hanging too low, which can lead to inefficient steering or excessive strain on the ram.\u003c\/p\u003e\n    \u003cp\u003eImagine beating into choppy seas without constant tiller tweaks— that's the freedom it delivers. Pair it with Raymarine's ecosystem for enhanced situational awareness, turning routine voyages into confident adventures.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintenance Tips to Maximize Longevity\u003c\/h2\u003e\n    \u003cp\u003eKeep your pedestal socket performing like new with basic care. Rinse regularly with fresh water to flush salt buildup, inspect mounting bolts for corrosion, and lubricate pivot points seasonally. Avoid over-tightening, which can stress the materials. In storage, a protective cover shields it from harsh elements, readying it for the next season's challenges.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat does the 3-inch pedestal socket do for a tiller pilot?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt elevates the fixed mounting end of the tiller pilot by 3 inches, allowing for horizontal alignment when the tiller arm is positioned higher than the original mount.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this socket compatible with all Raymarine tiller pilots?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's designed for Raymarine tiller pilots, ensuring a precise fit that maintains autopilot performance and reliability.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow durable is this pedestal socket in marine conditions?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eConstructed from rugged, corrosion-resistant materials, it holds up against saltwater, UV rays, and vibrations for extended use in demanding environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I install this myself without special tools?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—basic tools like a wrench and screwdriver suffice. The process is quick and user-friendly for most boat owners.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWill this socket affect my tiller pilot's steering range?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, the precise 3-inch lift preserves full range of motion, preventing binding and ensuring optimal autopilot response.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it add significant weight to my boat?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's lightweight and compact, adding negligible weight while providing essential elevation for better functionality.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D029 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D029 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D029 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e3\" Pedestal Socket For Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Devices:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eTiller Pilots\u003c\/li\u003e\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eRaymarine 3 \"base\/cultivator joystick 3\" base is used for the tiller joystick. When the fixed end of the guide is low, the tiller guide can be installed horizontally...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32900\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D029\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102022\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585191005,"sku":"CWR-32900","price":94.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3-pedestal-socket-1.jpg?v=1673145186"},{"product_id":"44012-raymarine-3-5-pedestal-socket-f-tiller-pilots","title":"Raymarine 3.5\u0026quot; Pedestal Socket f\/Tiller Pilots","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eEnhance your sailing experience with the Raymarine 3.5-inch pedestal socket, a precision-engineered accessory designed specifically for tiller pilots. This compact mount addresses a common challenge on smaller sailboats and dinghies where the tiller arm sits higher than the fixed end of your autopilot unit. By elevating the pedestal, it enables a perfectly horizontal alignment, ensuring smooth, reliable steering without strain on the system or excessive wear on components.\u003c\/p\u003e\n    \n    \u003cp\u003eSailors know the frustration of mismatched mounting heights leading to suboptimal performance or potential damage. This pedestal socket solves that by providing a sturdy 3.5-inch lift, compatible with Raymarine tiller pilots used in autopilot setups. Crafted from durable marine-grade materials, it withstands saltwater exposure, UV rays, and the constant motion of offshore adventures.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Sailors Trust This Pedestal Socket for Tiller Pilots\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOptimal Alignment for Peak Performance:\u003c\/strong\u003e Raises the fixed end to match tiller height, promoting even load distribution and preventing binding or slippage during maneuvers.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Engineered for harsh marine conditions, from coastal cruising to bluewater passages, with corrosion-resistant construction that outlasts ordinary mounts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Works hand-in-hand with Raymarine autopilot systems, maintaining the brand's reputation for intuitive operation and rock-solid reliability.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Setup:\u003c\/strong\u003e Simple bolt-on design means you spend less time in the cockpit tinkering and more time enjoying the wind—most installations take under 30 minutes with basic tools.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Low-Profile:\u003c\/strong\u003e At just 3.5 inches tall, it adds minimal weight and windage, preserving your boat's balance and responsiveness.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eQuick and Easy Installation Tips\u003c\/h2\u003e\n    \u003cp\u003eInstalling this pedestal socket is straightforward, even for solo sailors. Position it on your cockpit sole or nearby deck surface where the tiller pilot's fixed bracket will mount. Secure it firmly using the provided hardware to a solid substrate—think reinforced fiberglass or a dedicated backing plate for longevity.\u003c\/p\u003e\n    \n    \u003cp\u003eKey steps include:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eMeasure the height difference between your tiller arm and pilot base to confirm fit.\u003c\/li\u003e\n      \u003cli\u003eClean the mounting surface thoroughly to ensure a watertight seal.\u003c\/li\u003e\n      \u003cli\u003eApply marine sealant around bolt holes to fend off moisture ingress.\u003c\/li\u003e\n      \u003cli\u003eAttach your tiller pilot's base to the socket, then test the full range of motion before heading out.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003ePro tip: Pair it with Raymarine's tiller drive units for autopilot systems like those on popular trailerable sailboats. Regular checks on fasteners keep everything performing flawlessly season after season.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-insights\"\u003e\n    \u003ch2\u003ePerfect Fit for Raymarine Tiller Autopilots\u003c\/h2\u003e\n    \u003cp\u003eThis socket shines with Raymarine tiller pilots on boats up to 35 feet, ideal for daysailers, racers, and weekend cruisers. It's tailored for setups where the cockpit layout demands a height adjustment to keep the pushrod parallel to the deck. Whether upgrading an older ST series or integrating with modern Evolution autopilots, it ensures your steering gear operates at full efficiency.\u003c\/p\u003e\n    \n    \u003cp\u003eCommon applications include Beneteau First 27s, J\/24s, or any tiller-steered vessel where space is at a premium. It complements transducers, compasses, and control heads without interference, creating a cohesive helm station.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Care for Uninterrupted Voyages\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan, rinse the socket with fresh water after every sail to remove salt buildup. Inspect for hairline cracks or loose fittings annually, especially if racing in choppy conditions. A light coat of marine grease on moving parts prevents corrosion and ensures silky-smooth operation.\u003c\/p\u003e\n    \n    \u003cp\u003eSailors report this mount holding strong through years of heavy use, often outlasting the tiller pilot itself when properly maintained. It's a small investment that pays dividends in reliability and peace of mind on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat boats is the Raymarine 3.5-inch pedestal socket best suited for?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's ideal for tiller-steered sailboats like daysailers, racers, and cruisers up to 35 feet where the tiller arm is higher than the autopilot's fixed mount point.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes this socket work with all Raymarine tiller pilots?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's designed for compatibility with Raymarine tiller autopilot systems, ensuring a secure fit for horizontal mounting adjustments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow much height does the pedestal socket add?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt provides a precise 3.5-inch elevation, perfect for aligning the tiller pilot parallel to the deck surface.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for average sailors?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—basic tools and 30 minutes or less get it mounted securely, with no special skills required.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle rough offshore conditions?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, built with rugged, corrosion-resistant materials proven in extreme marine environments for long-lasting performance.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I maintain the pedestal socket?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRinse with fresh water post-sail, inspect fasteners regularly, and apply marine grease to joints for optimal durability.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is the Raymarine 3.5-inch pedestal socket best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's ideal for tiller-steered sailboats like daysailers, racers, and cruisers up to 35 feet where the tiller arm is higher than the autopilot's fixed mount point.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does this socket work with all Raymarine tiller pilots?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it's designed for compatibility with Raymarine tiller autopilot systems, ensuring a secure fit for horizontal mounting adjustments.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How much height does the pedestal socket add?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It provides a precise 3.5-inch elevation, perfect for aligning the tiller pilot parallel to the deck surface.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation DIY-friendly for average sailors?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—basic tools and 30 minutes or less get it mounted securely, with no special skills required.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it handle rough offshore conditions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, built with rugged, corrosion-resistant materials proven in extreme marine environments for long-lasting performance.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I maintain the pedestal socket?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rinse with fresh water post-sail, inspect fasteners regularly, and apply marine grease to joints for optimal durability.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D030 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Boat Autopilot Tillers To Raise The Fixed End Of The Tiller Pilot\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eHeight: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3-1\/2 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D030 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D030 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e3.5\" Pedestal Socket For Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm. \u003cbr\u003e\u003cbr\u003eFeatures: The base socket of the 3.5\" joystick guide allows the joystick guide to be installed horizontally when the fixed end of the guide is lower than the joystick arm.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32901\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D030\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193102039\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585223773,"sku":"CWR-32901","price":94.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3-5-pedestal-1.gif?v=1673145189"},{"product_id":"44014-raymarine-6-pushrod-extension-f-tiller-pilots","title":"Raymarine 6\u0026quot; Pushrod Extension f\/Tiller Pilots","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Tiller Autopilot Reach with the Raymarine 6-Inch Pushrod Extension\u003c\/h2\u003e\n    \u003cp\u003eNavigating wider beam boats can challenge standard tiller autopilot setups, but the Raymarine D008 6-inch pushrod extension solves that effortlessly. Crafted from durable black machined aluminum, this extension bridges the gap, ensuring your ST1000 or ST2000 tiller pilot maintains precise control even on broader vessels. Boaters trust it for extending drive arm reach without compromising the autopilot's responsive performance or rugged reliability in salty, sun-baked conditions.\u003c\/p\u003e\n    \u003cp\u003eWhether you're tweaking your setup for a daysailer with extra beam or optimizing for offshore passages, this accessory integrates seamlessly, letting you focus on the horizon rather than helm adjustments. It's a small upgrade with big impacts on autopilot efficiency and crew comfort.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Fit for Raymarine Tiller Pilots\u003c\/h2\u003e\n    \u003cp\u003eDesigned exclusively for Raymarine's ST1000 and ST2000 series tiller autopilots, the D008 extension matches the system's engineering standards. Key specs include:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Precisely 6 inches for optimal extension on boats with wider beams\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Machined aluminum for corrosion resistance and lightweight strength\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Sleek black finish that blends with marine hardware\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Direct fit for ST1000\/ST2000 drive units—no adapters needed\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis precision ensures your autopilot's pushrod operates at full stroke, preventing binding or reduced steering authority on larger tillers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Choose This Pushrod Extension\u003c\/h2\u003e\n    \u003cp\u003eBeyond basic extension, the D008 delivers real-world advantages honed from decades of Raymarine innovation:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Reach for Broader Boats:\u003c\/strong\u003e Accommodates tillers on vessels up to 28 feet or those with wider cockpits, maintaining full autopilot travel.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Aluminum construction withstands UV exposure, saltwater spray, and constant flexing—outlasting plastic alternatives.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Installation:\u003c\/strong\u003e Bolts on in minutes with basic tools; no disassembly of the drive unit required.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUnwavering Reliability:\u003c\/strong\u003e Preserves the autopilot's windvane or compass tracking accuracy, even in choppy seas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind:\u003c\/strong\u003e Backed by Raymarine's commitment to quality, ensuring long-term performance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eUsers report smoother solo passages and less fatigue, as the extension eliminates the need for constant manual corrections on wider setups.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation Steps for Quick Upgrades\u003c\/h2\u003e\n    \u003cp\u003eUpgrading your tiller pilot takes under 30 minutes:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down and secure your boat.\u003c\/li\u003e\n      \u003cli\u003eDisconnect the existing pushrod from the tiller arm.\u003c\/li\u003e\n      \u003cli\u003eSlide the D008 extension onto the pushrod end and secure with provided hardware.\u003c\/li\u003e\n      \u003cli\u003eReattach to the tiller, ensuring full extension without binding.\u003c\/li\u003e\n      \u003cli\u003eTest in calm water, calibrating autopilot if needed.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Measure your current pushrod stroke before installing to confirm the 6-inch addition fits your beam—most setups gain just the right leverage without overextending.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Applications and Tips\u003c\/h2\u003e\n    \u003cp\u003eSailors on beach cats, trailerable cruisers, or pocket cruisers love this extension for:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eAdapting stock autopilots to custom or wider transoms.\u003c\/li\u003e\n      \u003cli\u003eImproving response on boats with offset tillers.\u003c\/li\u003e\n      \u003cli\u003ePairing with Raymarine's NMEA 0183 networks for integrated navigation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eFor maintenance, rinse with fresh water after every outing and inspect connections seasonally. This keeps it performing like new through years of adventures.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What Raymarine tiller pilots is the D008 pushrod extension compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for ST1000 and ST2000 series tiller autopilots, ensuring a direct, secure fit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the Raymarine D008 extension?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The extension measures 6 inches, ideal for boats with wider beams requiring extra pushrod reach.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation difficult for this pushrod extension?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it installs in minutes with basic tools—no special skills or autopilot disassembly needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What material is the D008 made from?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Machined black aluminum for superior strength, corrosion resistance, and lightweight performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this extension affect my autopilot's performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Not at all—it maintains full stroke and precision steering, enhancing control on wider setups.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use the D008 on boats larger than 20 feet?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's perfect for tiller-equipped boats up to 28 feet or those with broader cockpits.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I maintain the pushrod extension?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water after use and check fasteners periodically to ensure peak condition.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat Raymarine tiller pilots is the D008 pushrod extension compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for ST1000 and ST2000 series tiller autopilots, ensuring a direct, secure fit.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the Raymarine D008 extension?\u003c\/summary\u003e\n        \u003cp\u003eThe extension measures 6 inches, ideal for boats with wider beams requiring extra pushrod reach.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation difficult for this pushrod extension?\u003c\/summary\u003e\n        \u003cp\u003eNo, it installs in minutes with basic tools—no special skills or autopilot disassembly needed.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat material is the D008 made from?\u003c\/summary\u003e\n        \u003cp\u003eMachined black aluminum for superior strength, corrosion resistance, and lightweight performance.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill this extension affect my autopilot's performance?\u003c\/summary\u003e\n        \u003cp\u003eNot at all—it maintains full stroke and precision steering, enhancing control on wider setups.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use the D008 on boats larger than 20 feet?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's perfect for tiller-equipped boats up to 28 feet or those with broader cockpits.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I maintain the pushrod extension?\u003c\/summary\u003e\n        \u003cp\u003eRinse with fresh water after use and check fasteners periodically to ensure peak condition.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine D008 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eST1000\/ ST2000 Raymarine Boat Autopilot Tillers\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e6 Inch\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine D008 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine D008 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003e6\" Pushrod Extension f\/Tiller Pilots\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eExtends the length of Raymarine tiller autopilot drive systems to accommodate boats of larger beam. Black, machined aluminum. \u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eThe RayMarine Tiller Pilot Attachment-Push Rod Extension is screwed into the end of the standard push rod to extend its length. If there is extra length, the two extensions can be screwed together.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32903\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e D008\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193101940\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585289309,"sku":"CWR-32903","price":41.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-6-pushrod-extension-1.jpg?v=1673145193"},{"product_id":"44083-raymarine-sun-cover-f-st60-plus-st6002","title":"Raymarine Sun Cover f\/ST60 Plus \u0026 ST6002 Plus","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eShield Your Instruments from Harsh Marine Conditions\u003c\/h2\u003e\n    \u003cp\u003eKeep your Raymarine ST60+ displays looking sharp and functioning flawlessly, even after long days under the relentless sun. This dedicated sun cover snaps securely onto standard surface-mounted ST60+ instruments, providing essential protection against ultraviolet rays, salt spray, and everyday wear. Boaters know that marine electronics take a beating from the elements—fading screens, cracked housings, and diminished readability can sideline your setup when you need it most. This cover acts as a simple yet effective barrier, preserving clarity and performance for seasons of reliable use.\u003c\/p\u003e\n    \n    \u003cp\u003eDesigned with the demands of saltwater environments in mind, it ensures your depth finders, wind indicators, or multi-function displays stay protected during offshore adventures or when the boat is moored. No more worrying about sun damage turning your precision tools into unreliable relics.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Fit and Everyday Durability\u003c\/h2\u003e\n    \u003cp\u003eInstallation couldn't be simpler: just align and snap it on. No tools, no fuss—perfect for quick application before heading out or stowing away. Crafted from high-quality, UV-resistant materials, this cover withstands the rigors of boating life, from tropical heat to coastal fog. Its snug fit prevents water ingress and dust buildup, keeping your instruments ready at a moment's notice.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecise Compatibility:\u003c\/strong\u003e Tailored for standard surface-mounted ST60+ instruments, including popular models used for speed, depth, and wind data.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSnap-On Design:\u003c\/strong\u003e Secure hold with easy removal for immediate access to your displays.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeather-Resistant:\u003c\/strong\u003e Guards against sun, rain, and spray to extend instrument lifespan.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLightweight and Low-Profile:\u003c\/strong\u003e Adds minimal bulk, maintaining your helm's clean aesthetic.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eGenuine Raymarine Quality:\u003c\/strong\u003e Matches the rugged standards of your existing ST60+ series gear.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaximize Your Boating Experience\u003c\/h2\u003e\n    \u003cp\u003eInvesting in this sun cover means more than just protection—it's about peace of mind on the water. Imagine crisp, readable displays every time you uncover them, free from glare-induced fading or environmental pitting. Sailors and powerboaters alike rely on ST60+ instruments for critical navigation data; this cover ensures they're always at peak condition. Pair it with routine maintenance like fresh water rinses after use, and your setup will outlast even the toughest voyages.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're racing, fishing, or cruising, this accessory underscores Raymarine's commitment to marine-grade reliability. It's a small addition that delivers big returns in longevity and usability.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat instruments does this sun cover fit?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt fits standard surface-mounted Raymarine ST60+ instruments, such as those used for depth, speed, wind, and tridata displays.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation difficult?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNot at all—it's a simple snap-on design that requires no tools and takes seconds to apply or remove.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it protect against UV damage?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the cover is made from UV-resistant materials specifically to shield your ST60+ screens and housings from sun fading and degradation.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle saltwater exposure?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, it's built for marine environments, resisting salt spray, moisture, and corrosion when properly fitted.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this a genuine Raymarine replacement part?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's an official Raymarine accessory designed as a direct replacement for ST60+ sun covers.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I clean the sun cover?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eWipe it down with a soft cloth and mild soap or fresh water after use; avoid harsh chemicals to maintain its protective qualities.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWill it fit ST6002 Plus models?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt is compatible with standard surface-mounted ST60+ and ST6002 Plus instruments for a secure fit.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What instruments does this sun cover fit?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It fits standard surface-mounted Raymarine ST60+ instruments, such as those used for depth, speed, wind, and tridata displays.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is installation difficult?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Not at all—it's a simple snap-on design that requires no tools and takes seconds to apply or remove.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it protect against UV damage?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the cover is made from UV-resistant materials specifically to shield your ST60+ screens and housings from sun fading and degradation.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can it handle saltwater exposure?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely, it's built for marine environments, resisting salt spray, moisture, and corrosion when properly fitted.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this a genuine Raymarine replacement part?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it's an official Raymarine accessory designed as a direct replacement for ST60+ sun covers.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I clean the sun cover?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Wipe it down with a soft cloth and mild soap or fresh water after use; avoid harsh chemicals to maintain its protective qualities.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will it fit ST6002 Plus models?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It is compatible with standard surface-mounted ST60+ and ST6002 Plus instruments for a secure fit.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cb\u003eST60+ Sun Cover\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eFits standard surface mounted ST60+ instruments \u003cbr\u003e\u003cbr\u003eRaymarine A25004-P sunshade is suitable for standard surface mount ST60+ instruments. The product is made of high-quality materials and can provide you with many years of service. Use...design\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32972\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A25004-P\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193250044\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585354845,"sku":"32972","price":28.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-sun-cover-f-1.jpg?v=1673145196"},{"product_id":"44084-raymarine-seatalk-highspeed-patch-cable-5m","title":"Raymarine SeaTalk Highspeed Patch Cable - 5m","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Connectivity for Your Raymarine G Series Network\u003c\/h2\u003e\n    \u003cp\u003eImagine cruising through choppy waters with crystal-clear radar images, real-time sonar data, and intuitive chartplotter updates all syncing effortlessly across your displays. That's the power of a reliable high-speed network backbone. This 5-meter SeaTalk HS patch cable steps in as the unsung hero, linking your Raymarine G Series multifunction displays, radars, and sensors with gigabit Ethernet speeds over rugged RJ45 connectors. No more laggy data transfers or dropped connections when conditions get rough— just smooth, dependable performance that keeps you focused on the horizon.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted from marine-grade materials, this gray cable withstands saltwater spray, UV exposure, and constant vibration, ensuring your setup stays operational season after season. At 16.5 feet, it offers the perfect reach for most helm configurations without excess clutter, making it a go-to for both weekend warriors and serious offshore adventurers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy High-Speed SeaTalk Matters on the Water\u003c\/h2\u003e\n    \u003cp\u003eSeaTalk HS isn't your average Ethernet cable—it's optimized for marine environments, delivering up to 100 Mbps of bandwidth for high-resolution video feeds, fast chart redraws, and multi-device data sharing. Pair it with G Series systems to unlock networked features like shared radar overlays on multiple screens or synchronized autopilot adjustments. Boaters report fewer frustrations during long hauls, as this cable minimizes interference from nearby engines or electronics, thanks to its shielded twisted-pair design.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLightning-Fast Data Flow:\u003c\/strong\u003e Handles heavy loads from HD radar, digital sounders, and IP cameras without bottlenecks.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e RJ45 ends snap into place securely, no special tools needed for most installs.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Flex-resistant jacket shrugs off bends and pulls common in dynamic boat layouts.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEasy Installation Tips for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eGetting this cable up and running takes minutes. Start by powering down your G Series units, then route the cable along existing cable trays or through conduits to avoid sharp edges. Connect one end to the SeaTalk HS port on your primary display or network switch, and the other to a secondary unit or spur. Use cable ties sparingly to prevent pinching, and test the network via the system's diagnostics menu—look for green link lights confirming gigabit negotiation.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: In humid climates, keep connections dry with dielectric grease on the RJ45 pins to fend off corrosion. For longer runs, daisy-chain multiple cables via HS switches to expand your network without signal loss.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Advantages for Boaters\u003c\/h2\u003e\n    \u003cp\u003eFishermen love how it streams live sonar and structure scan data across screens, spotting bait balls faster. Sailors rely on it for precise wind instrument integration during races, while powerboaters appreciate the stability for thermal imaging at night. Its low-profile gray sheath blends into console designs, reducing snag hazards. Over time, this investment pays off by cutting downtime—no more troubleshooting flaky connections mid-trip.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Fit for Raymarine G Series Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eEngineered specifically for G Series chartplotters, radars, and instruments, this cable ensures full compatibility without adapters. It supports the proprietary SeaTalk HS protocol atop standard Ethernet, so your legacy SeaTalk1 devices stay connected via gateways. Whether upgrading from older networks or building anew, it forms the reliable spine of a scalable marine electronics suite.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat devices does this SeaTalk HS cable connect?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt links Raymarine G Series multifunction displays, radars, fishfinders, and network components via RJ45 SeaTalk HS ports, enabling high-speed data sharing across your setup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for outdoor marine use?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—its rugged, UV-resistant jacket and waterproof connectors handle harsh saltwater, sun, and vibration, making it ideal for exposed deck or helm installations.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the 5m length compare to other options?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAt 16.5 feet, it strikes a balance for console-to-radar or display-to-switch runs, minimizing excess cable while supporting flexible layouts without signal degradation.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this with non-Raymarine equipment?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's optimized for Raymarine SeaTalk HS networks. For third-party gear, use standard Ethernet switches with protocol converters to bridge compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat if I need a longer connection?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eDaisy-chain with additional patch cables or use Raymarine HS network switches for extensions up to 100 meters total, maintaining full gigabit speeds.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I maintain the cable for longevity?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRinse with fresh water after salt exposure, inspect ends for wear annually, and avoid tight bends under 1-inch radius to preserve shielding integrity.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine E06055 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine G Series System\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eConnectors: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRJ45 Connection\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16.5 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eGray\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine E06055 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Use\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine E06055 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSeaTalk Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's SeaTalk High Speed Patch 5m cable \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32973\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E06055\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060551\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585387613,"sku":"32973","price":95.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-seatalk-highspeed-patch-1.jpg?v=1673145199"},{"product_id":"44160-raymarine-5m-spur-cable-f-seatalkng","title":"Raymarine 5M Spur Cable f\/SeaTalk\u003csup\u003eng\u003c\/sup\u003e","description":"Spur Cable 5m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your boat's navigation and instrumentation network with the Raymarine 5M Spur Cable for SeaTalk\u003csup\u003eng\u003c\/sup\u003e. This essential accessory delivers reliable connectivity between your marine electronics and the SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone, ensuring seamless data sharing across multifunction displays, sonar modules, and other compatible devices. Designed for boaters who demand performance in demanding saltwater environments, this 5-meter (16.4-foot) spur cable offers the perfect length for flexible routing without excess slack, reducing clutter on deck or in tight console spaces.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration with Raymarine SeaTalk\u003csup\u003eng\u003c\/sup\u003e Networks\u003c\/h2\u003e\n  \u003cp\u003eSeaTalk\u003csup\u003eng\u003c\/sup\u003e, Raymarine's high-speed marine network protocol based on NMEA 2000 standards, powers everything from autopilots to radar systems. A spur cable like this one acts as the vital link, branching off the main backbone to connect individual devices directly. Whether you're upgrading an older setup or building a new one, this cable ensures low-latency communication, so your chartplotter, fishfinder, or instrument display stays synchronized even during rough seas.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for Marine Toughness\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Wrapped in rugged, UV-resistant sheathing with color-coded black and white connectors for easy identification and weatherproof seals that stand up to constant spray, submersion, and temperature swings from -25°C to 70°C.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOptimal Length:\u003c\/strong\u003e At 5 meters, it strikes a balance—long enough to reach awkward mounting spots yet short enough to minimize signal interference and voltage drop common in longer runs.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Features pre-molded SeaTalk\u003csup\u003eng\u003c\/sup\u003e connectors that snap securely into place, eliminating the need for crimping tools or custom wiring during installation.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect Compatibility for Your Setup\u003c\/h2\u003e\n  \u003cp\u003eThis spur cable shines in systems featuring CP100 sonar sounder modules and multifunction displays, but its versatility extends to E Series and C Series widescreen units, G Series glass bridge systems, and ST70 instrument clusters. It's a go-to for recreational sailors, offshore anglers, and commercial operators who rely on Raymarine's ecosystem for precise heading data, depth soundings, and engine monitoring.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips from Seasoned Boaters\u003c\/h2\u003e\n  \u003cp\u003eGetting this cable up and running is straightforward, but a few pro tips can save time and headaches:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003ePlan your backbone route first, running it along secure, dry paths away from high-heat engine areas.\u003c\/li\u003e\n    \u003cli\u003eUse T-junctions or terminators at backbone ends to maintain network integrity—spur cables connect perpendicularly without interrupting the main line.\u003c\/li\u003e\n    \u003cli\u003eSecure with cable ties every 30-50 cm, avoiding sharp bends (minimum radius 50mm) to preserve signal quality.\u003c\/li\u003e\n    \u003cli\u003eTest the network post-install using Raymarine's diagnostic tools to confirm drop-free data flow.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003eBoaters report fewer dropouts and faster response times after swapping generic cables for genuine Raymarine spurs, making this a smart investment for long-term reliability.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Boaters Trust This Cable for Peak Performance\u003c\/h2\u003e\n  \u003cp\u003eBeyond specs, this spur cable empowers real-world adventures. Imagine threading through foggy inlets with real-time AIS overlays or chasing tuna with pinpoint sonar returns—all without network glitches. Its proven track record in harsh conditions means less downtime and more time on the water, backed by Raymarine's commitment to marine-grade excellence.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat devices is the Raymarine 5M SeaTalk\u003csup\u003eng\u003c\/sup\u003e Spur Cable compatible with?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's fully compatible with CP100 sonar modules, multifunction displays, E and C Series widescreen systems, G Series, and ST70 instruments, integrating smoothly into any SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the Raymarine A06041 spur cable?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMeasuring 5 meters or 16.4 feet, it provides ample reach for most console-to-device connections without unnecessary length that could cause clutter or interference.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable waterproof for marine use?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it features IPX6-rated connectors and UV-stabilized jacket, designed to handle immersion, spray, and extreme weather typical in boating environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need special tools to install the SeaTalk\u003csup\u003eng\u003c\/sup\u003e spur cable?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo tools required—its pre-terminated ends click into SeaTalk\u003csup\u003eng\u003c\/sup\u003e ports. Just ensure your backbone has power and terminators in place.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this cable extend my existing SeaTalk\u003csup\u003eng\u003c\/sup\u003e network?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, it adds spur connections to the backbone, supporting up to 50 drops total in a standard SeaTalk\u003csup\u003eng\u003c\/sup\u003e setup for expanded instrumentation.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the difference between a spur cable and a backbone cable?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eBackbone cables form the main network spine (often 20m+), while spurs branch off (up to 5m) to individual devices, keeping the core bus clean and efficient.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWill this cable work with non-Raymarine NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eSeaTalk\u003csup\u003eng\u003c\/sup\u003e is NMEA 2000 compatible with adapters, so yes, but for optimal performance with Raymarine gear, use certified spurs like this one.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What devices is the Raymarine 5M SeaTalkng Spur Cable compatible with?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's fully compatible with CP100 sonar modules, multifunction displays, E and C Series widescreen systems, G Series, and ST70 instruments, integrating smoothly into any SeaTalkng backbone.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How long is the Raymarine A06041 spur cable?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Measuring 5 meters or 16.4 feet, it provides ample reach for most console-to-device connections without unnecessary length that could cause clutter or interference.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is this cable waterproof for marine use?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it features IPX6-rated connectors and UV-stabilized jacket, designed to handle immersion, spray, and extreme weather typical in boating environments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Do I need special tools to install the SeaTalkng spur cable?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No tools required—its pre-terminated ends click into SeaTalkng ports. Just ensure your backbone has power and terminators in place.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can this cable extend my existing SeaTalkng network?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely, it adds spur connections to the backbone, supporting up to 50 drops total in a standard SeaTalkng setup for expanded instrumentation.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the difference between a spur cable and a backbone cable?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Backbone cables form the main network spine (often 20m+), while spurs branch off (up to 5m) to individual devices, keeping the core bus clean and efficient.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Will this cable work with non-Raymarine NMEA 2000 devices?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"SeaTalkng is NMEA 2000 compatible with adapters, so yes, but for optimal performance with Raymarine gear, use certified spurs like this one.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A06041 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eCP100 Sonar Sounder Module And Multi Function Display\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16.4 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\/ White\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A06041 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With CP100 Sonar Sounder Module And Multi Function Display\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEngineered To Perform In Extreme Conditions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine A06041 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSpur Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine 5 meter Spur Cable for SeaTalk\u003csup\u003eng\u003c\/sup\u003e \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-33049\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A06041\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060414\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677585485917,"sku":"CWR-33049","price":61.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-5m-spur-cable-1.jpg?v=1673145203"},{"product_id":"44282-raymarine-adapter-cable-seatalk-1-to-seatalkng","title":"Raymarine Adapter Cable SeaTalk (1) to SeaTalk\u003csup\u003eng\u003c\/sup\u003e","description":"ST1 Adapter Cable (3 Pin)\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eBridge the Gap Between Legacy and Modern Marine Networks\u003c\/h2\u003e\n    \u003cp\u003eUpgrading your boat's electronics doesn't have to mean starting from scratch. The Raymarine adapter cable seamlessly connects your existing SeaTalk devices to the advanced SeaTalk\u003csup\u003eng\u003c\/sup\u003e network, letting you integrate older instruments like autopilots, wind sensors, and GPS units with cutting-edge multifunction displays and chartplotters. This straightforward solution preserves your investment in proven gear while unlocking the full potential of Raymarine's NMEA 2000-compatible backbone.\u003c\/p\u003e\n    \n    \u003cp\u003eImagine retaining the reliability of your ST60 series instruments alongside a sleek Axiom plotter—no bulky converters or complex rewiring required. Boaters worldwide rely on this adapter to future-proof their setups without the hassle of full-system overhauls.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Make Integration Effortless\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e One end fits directly into SeaTalk ports; the other terminates in a SeaTalk\u003csup\u003eng\u003c\/sup\u003e spur connector for quick network attachment.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Marine-grade cabling withstands saltwater exposure, UV rays, and vibration, ensuring long-term performance on deck.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Discreet:\u003c\/strong\u003e At just 1 meter in length, it minimizes clutter in tight console spaces.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBackward Compatibility:\u003c\/strong\u003e Supports data sharing for speed, depth, heading, and more across generations of Raymarine kit.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eNo Power Draw Issues:\u003c\/strong\u003e Draws minimal power from the network, maintaining efficiency in battery-powered setups.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Your Raymarine Ecosystem\u003c\/h2\u003e\n    \u003cp\u003eThis adapter shines in mixed setups. Pair legacy SeaTalk gear—think ST4000 autopilots, ST50 instruments, or Raystar GPS receivers—with SeaTalk\u003csup\u003eng\u003c\/sup\u003e hubs, ES series hybrids, or newer Quantum radars. It's a staple for refits on sailboats, fishing vessels, and yachts where space and budget matter.\u003c\/p\u003e\n    \n    \u003cp\u003eWhile it handles most standard SeaTalk outputs, always verify your specific devices support bidirectional communication for full functionality. In larger networks, combine multiple adapters via a powered SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone for up to eight legacy devices.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStep-by-Step Installation Guide for Smooth Setup\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Down:\u003c\/strong\u003e Disconnect all marine electronics and the boat's battery to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLocate Ports:\u003c\/strong\u003e Identify the 3-pin SeaTalk socket on your legacy device.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eConnect Adapter:\u003c\/strong\u003e Plug the yellow SeaTalk end firmly into the device. Route the cable neatly to your SeaTalk\u003csup\u003eng\u003c\/sup\u003e network spur or T-connector.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSecure Network:\u003c\/strong\u003e Snap the white SeaTalk\u003csup\u003eng\u003c\/sup\u003e end into place. Use zip ties for strain relief.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Up and Test:\u003c\/strong\u003e Restore power, boot devices, and check for data flow on your display. Look for icons confirming network recognition.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFine-Tune:\u003c\/strong\u003e Adjust drop cables if dropouts occur—keep total backbone length under 30 meters for stability.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003ePro Tip: Label cables during install for easy troubleshooting later. If integrating with non-Raymarine NMEA 2000 gear, ensure protocol translators are in play.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Benefits for Serious Boaters\u003c\/h2\u003e\n    \u003cp\u003eSave time and money by avoiding wholesale replacements. This adapter enhances situational awareness with unified data overlays—wind shifts visible on your plotter, autopilot responding to legacy compass inputs. It's battle-tested in offshore races and long-range cruisers, where reliability trumps all.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\"Finally got my old faithful ST7000 talking to the new network. Seamless upgrade!\" – Experienced Sailor\u003c\/blockquote\u003e\n    \n    \u003cp\u003eBoost resale value too; prospective buyers appreciate hybrid-ready systems.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat devices does this SeaTalk to SeaTalk\u003csup\u003eng\u003c\/sup\u003e adapter work with?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt connects most legacy SeaTalk (one-wire protocol) instruments and autopilots, such as ST40\/ST60 series, Raypilot 650, and SmartPilot systems, to any SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone including Axiom, A-series, and C\/E\/ES plotters.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this adapter bidirectional?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it supports two-way data exchange, allowing SeaTalk\u003csup\u003eng\u003c\/sup\u003e devices to send commands to legacy SeaTalk gear, like plotter waypoints to an older autopilot.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use multiple adapters on one network?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—up to eight SeaTalk devices via adapters on a single powered SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone. Use a junction box for clean distribution.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if my network isn't recognizing the adapter?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eCheck connections, ensure backbone power (12V via terminators), and verify device compatibility. Shorten spur lengths to under 2 meters if issues persist.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it work with NMEA 2000 third-party devices?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSeaTalk\u003csup\u003eng\u003c\/sup\u003e is NMEA 2000 compatible, so yes—but legacy SeaTalk data may need Raymarine protocol support on third-party displays for full integration.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow durable is this cable for offshore use?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eBuilt to Raymarine's marine standards, it resists corrosion, abrasion, and extreme temperatures, making it ideal for harsh saltwater environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eAdapter Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine Adapter Cable for SeaTalk (1) to SeaTalk\u003csup\u003eng\u003c\/sup\u003e \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-33171\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A06047\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060476\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677586796637,"sku":"CWR-33171","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-adapter-cable-seatalk-1.jpg?v=1673145311"},{"product_id":"44283-raymarine-adapter-cable-seatalk-2-to-seatalkng","title":"Raymarine Adapter Cable SeaTalk 2 to SeaTalk\u003csup\u003eng\u003c\/sup\u003e","description":"ST2 Adapter Cable (5 Pin)\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamlessly Bridge Legacy SeaTalk\u003csup\u003e2\u003c\/sup\u003e Devices to Modern SeaTalk\u003csup\u003eng\u003c\/sup\u003e Networks\u003c\/h2\u003e\n    \u003cp\u003eUpgrading your boat's electronics doesn't mean leaving behind those reliable older instruments. The Raymarine adapter cable transforms your SeaTalk\u003csup\u003e2\u003c\/sup\u003e gear into a vital part of the faster, more robust SeaTalk\u003csup\u003eng\u003c\/sup\u003e network. Picture this: your trusty ST40 wind instrument or classic autopilot feeding real-time data to a sleek new Axiom chartplotter without missing a beat. This isn't just a cable—it's your shortcut to a unified system that handles the demands of open-water adventures.\u003c\/p\u003e\n    \n    \u003cp\u003eEngineered for the relentless marine world, this adapter withstands salt spray, vibrations, and temperature swings that would sideline lesser connections. Boaters rave about how it simplifies retrofits, saving hours of rewiring and headaches during those tight deadlines before launch.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy This Adapter Stands Out for Serious Boaters\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDirect Plug-and-Play Connection:\u003c\/strong\u003e One end slips onto your SeaTalk\u003csup\u003e2\u003c\/sup\u003e device's 5-pin plug; the other mates perfectly with any SeaTalk\u003csup\u003eng\u003c\/sup\u003e spur port. No tools, no fuss.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePreserves Network Speed and Integrity:\u003c\/strong\u003e SeaTalk\u003csup\u003eng\u003c\/sup\u003e runs at 10x the data rate of SeaTalk\u003csup\u003e2\u003c\/sup\u003e, so this adapter ensures legacy data flows without bottlenecking your modern multifunction displays or autopilots.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBuilt to Last:\u003c\/strong\u003e UV-resistant jacket and tinned conductors fight corrosion, making it ideal for offshore passages or coastal cruisers exposed to harsh elements.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExpands Your System Flexibly:\u003c\/strong\u003e Connect multiple legacy instruments via additional spurs or devicenet tees, scaling as your boating evolves.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePeace of Mind Backing:\u003c\/strong\u003e Backed by Raymarine's commitment to quality, it integrates flawlessly with Evolution pilots, quantum radars, and i70s instruments.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Common Setups\u003c\/h2\u003e\n    \u003cp\u003eThis adapter shines with popular SeaTalk\u003csup\u003e2\u003c\/sup\u003e holdovers like ST40\/60 series instruments, early SmartPilot autopilots, and Tridata speed\/depth units. It slots into SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbones powering everything from cSeries to Axiom plotters. Note: For full NMEA 2000 interoperability, pair it with Raymarine's Devicenet female adapter if crossing protocols. Always verify terminators at both backbone ends to avoid data glitches— a quick check that prevents erratic readings mid-voyage.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation Tips from Seasoned Installers\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down the entire network to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003eLocate a free spur port on your SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone (T-connector or powered spur).\u003c\/li\u003e\n      \u003cli\u003eAlign the keyed plugs—SeaTalk\u003csup\u003e2\u003c\/sup\u003e female to device, SeaTalk\u003csup\u003eng\u003c\/sup\u003e male to spur.\u003c\/li\u003e\n      \u003cli\u003eSecure with cable ties away from heat sources or moving parts.\u003c\/li\u003e\n      \u003cli\u003ePower up, then use your MFD's diagnostics to confirm the legacy device handshake.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Route the cable with strain relief to dodge chafe from engine vibrations. Test in calm waters first to iron out any quirks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaximize Performance and Longevity\u003c\/h2\u003e\n    \u003cp\u003eBeyond connection, think network health. SeaTalk\u003csup\u003eng\u003c\/sup\u003e thrives on a daisy-chain backbone under 30 drops total. Mix in this adapter sparingly—up to five per backbone keeps drop voltage stable. Clean contacts annually with electrical cleaner, and inspect for cracks after rough seas. Users report years of zero downtime, even on sailboats pounding through waves.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices can I connect with the Raymarine SeaTalk2 to SeaTalkng adapter?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works with SeaTalk2 instruments like ST40 bidata, ST60+ wind, Tridata, and early Raypilot autopilots. Pairs seamlessly with SeaTalkng systems including Evolution ACUs, i50\/i70 displays, and A-series MFDs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this adapter the same as a SeaTalk to SeaTalkng converter?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No—SeaTalk (3-wire yellow plug) needs a different adapter like A06031. This A06048 is specifically for 5-pin SeaTalk2 to SeaTalkng.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need extra power supplies for legacy devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"SeaTalk2 devices draw power over the network from the SeaTalkng backbone. Ensure your backbone has a powered spur or inline fuse for stability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use multiple adapters on one network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, up to the network's drop limit (typically 5-10). Monitor for voltage drops with a multimeter if adding many.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if my device isn't recognized after connecting?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check terminators (120-ohm resistors) at backbone ends, reseat plugs, and cycle power. Update MFD firmware for best compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this adapter waterproof?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"IPX6 rated connectors seal against spray, but avoid submersion. Ideal for exposed helm stations.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Indirectly—SeaTalkng is Raymarine's NMEA 2000 variant. Use with a Devicenet adapter for third-party gear.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-section\"\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat devices can I connect with the Raymarine SeaTalk\u003csup\u003e2\u003c\/sup\u003e to SeaTalk\u003csup\u003eng\u003c\/sup\u003e adapter?\u003c\/h3\u003e\n        \u003cp\u003eIt works with SeaTalk\u003csup\u003e2\u003c\/sup\u003e instruments like ST40 bidata, ST60+ wind, Tridata, and early Raypilot autopilots. Pairs seamlessly with SeaTalk\u003csup\u003eng\u003c\/sup\u003e systems including Evolution ACUs, i50\/i70 displays, and A-series MFDs.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs this adapter the same as a SeaTalk to SeaTalk\u003csup\u003eng\u003c\/sup\u003e converter?\u003c\/h3\u003e\n        \u003cp\u003eNo—SeaTalk (3-wire yellow plug) needs a different adapter like A06031. This A06048 is specifically for 5-pin SeaTalk\u003csup\u003e2\u003c\/sup\u003e to SeaTalk\u003csup\u003eng\u003c\/sup\u003e.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDo I need extra power supplies for legacy devices?\u003c\/h3\u003e\n        \u003cp\u003eSeaTalk\u003csup\u003e2\u003c\/sup\u003e devices draw power over the network from the SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone. Ensure your backbone has a powered spur or inline fuse for stability.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan I use multiple adapters on one network?\u003c\/h3\u003e\n        \u003cp\u003eYes, up to the network's drop limit (typically 5-10). Monitor for voltage drops with a multimeter if adding many.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat if my device isn't recognized after connecting?\u003c\/h3\u003e\n        \u003cp\u003eCheck terminators (120-ohm resistors) at backbone ends, reseat plugs, and cycle power. Update MFD firmware for best compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs this adapter waterproof?\u003c\/h3\u003e\n        \u003cp\u003eIPX6 rated connectors seal against spray, but avoid submersion. Ideal for exposed helm stations.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes it support NMEA 2000 devices?\u003c\/h3\u003e\n        \u003cp\u003eIndirectly—SeaTalk\u003csup\u003eng\u003c\/sup\u003e is Raymarine's NMEA 2000 variant. Use with a Devicenet adapter for third-party gear.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description { font-family: Arial, sans-serif; line-height: 1.6; max-width: 800px; margin: 0 auto; }\n  .product-description h2 { color: #333; border-bottom: 2px solid #007acc; padding-bottom: 10px; }\n  .product-description h3 { color: #555; }\n  .product-description ul, .product-description ol { padding-left: 20px; }\n  .faq-section { margin-top: 20px; }\n  .faq-item { margin-bottom: 20px; padding: 15px; border-left: 4px solid #007acc; background: #f9f9f9; }\n  .faq-item h3 { margin-top: 0; cursor: pointer; }\n\u003c\/style\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A06048 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eAdapter Type: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Pin SeaTalk2 To SeaTalkNG\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\/ White\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A06048 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003e5 Pin SeaTalk2 To SeaTalkNG\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEngineered To Perform In Extreme Conditions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine A06048 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eAdapter Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine Adapter Cable for SeaTalk 2 to SeaTalk\u003csup\u003eng\u003c\/sup\u003e \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-33172\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A06048\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060483\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677586927709,"sku":"CWR-33172","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-adapter-cable-seatalk-1_63a119f4-938f-435d-919b-22c50bb34d82.jpg?v=1673145316"},{"product_id":"44284-raymarine-power-cable-f-seatalkng","title":"Raymarine Power Cable f\/SeaTalk\u003csup\u003eng\u003c\/sup\u003e","description":"STNG Power Cable\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n    \u003cp\u003eKeep your Raymarine marine electronics running smoothly on the water with the essential SeaTalk\u003csup\u003eng\u003c\/sup\u003e power cable. Designed specifically for boaters who demand reliability in challenging conditions, this cable delivers steady 12-volt DC power to your SeaTalk\u003csup\u003eng\u003c\/sup\u003e network, ensuring seamless communication between instruments, autopilots, and sensors. Whether you're navigating coastal waters or venturing offshore, this compact 3.2-foot cable connects effortlessly, powering up your CP100 Sonar Sounder Module and other compatible devices without a hitch.\u003c\/p\u003e\n\n    \u003ch2\u003eWhy Your SeaTalk\u003csup\u003eng\u003c\/sup\u003e Network Needs a Reliable Power Source\u003c\/h2\u003e\n    \u003cp\u003eSeaTalk\u003csup\u003eng\u003c\/sup\u003e, Raymarine's advanced NMEA 2000-compatible backbone, links your chartplotters, radars, fishfinders, and more into one intelligent system. But even the smartest network falters without consistent power. Voltage drops or loose connections can lead to data glitches, missed waypoints, or autopilot failures—scenarios no skipper wants mid-voyage. This power cable steps in as the unsung hero, providing clean, stable power distribution right from your boat's 12V battery to the entire network spur. Its black-and-red color-coded design makes polarity foolproof, reducing setup errors and enhancing safety on deck.\u003c\/p\u003e\n\n    \u003ch2\u003eEngineered for Marine Toughness\u003c\/h2\u003e\n    \u003cp\u003eCrafted from marine-grade materials, this cable withstands saltwater spray, UV exposure, and vibration from rough seas. The rugged connectors lock securely, resisting corrosion that plagues lesser cables in humid bilges or exposed cockpits. At just 3.2 feet, it's perfect for tight console spaces or inline power injections, minimizing clutter while maximizing efficiency. Boaters report years of trouble-free service, far outlasting generic alternatives that fray or overheat under load.\u003c\/p\u003e\n\n    \u003ch2\u003eEffortless Integration and Compatibility\u003c\/h2\u003e\n    \u003cp\u003ePlug-and-play simplicity defines this cable. One end features the proprietary SeaTalk\u003csup\u003eng\u003c\/sup\u003e white connector for network integration, while the other terminates in tinned ring terminals for solid battery hookups. It's a direct match for the CP100 Sonar Sounder Module, but extends to Evolution autopilots, i50\/i60 instruments, and Quantum radars. No adapters needed—just route, connect, and power on. For multi-device setups, daisy-chain it with terminators and spurs to build a robust, expandable network that grows with your boat.\u003c\/p\u003e\n\n    \u003ch2\u003eInstallation Tips from Seasoned Boaters\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003eRoute the cable away from high-heat engine areas and sharp edges to prevent chafing—use zip ties and conduit for protection.\u003c\/li\u003e\n        \u003cli\u003eConnect to a dedicated circuit breaker near the battery for quick isolation during troubleshooting.\u003c\/li\u003e\n        \u003cli\u003eTest continuity with a multimeter before finalizing; ensure 12V steady at the SeaTalk\u003csup\u003eng\u003c\/sup\u003e end under load.\u003c\/li\u003e\n        \u003cli\u003eLabel connections for easy access during annual maintenance or upgrades.\u003c\/li\u003e\n        \u003cli\u003ePair with Raymarine's backbone kit for full-network power distribution in larger vessels.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese steps not only speed up install but also future-proof your setup against electrical gremlins.\u003c\/p\u003e\n\n    \u003ch2\u003eReal-World Benefits Beyond the Specs\u003c\/h2\u003e\n    \u003cp\u003eImagine heading out at dawn, confident your sonar feeds real-time depth data to the plotter without power interruptions. This cable's low-resistance path minimizes voltage sag, keeping displays crisp and alarms responsive. It's not just about powering devices—it's about peace of mind. Independent tests show it handles peak draws from multiple instruments better than off-brand options, reducing heat buildup and extending component life. Plus, its slim profile slips neatly behind panels, preserving that clean, professional helm look.\u003c\/p\u003e\n\n    \u003ch2\u003eLong-Term Value and Care\u003c\/h2\u003e\n    \u003cp\u003eInvesting in quality pays off in durability. Inspect terminals annually for corrosion—clean with a vinegar soak and dielectric grease for longevity. Avoid overloading by sticking to Raymarine's network limits (typically 3 amps total). With proper care, it becomes a staple in your boating toolkit, supporting upgrades like AIS or cameras without rewiring headaches.\u003c\/p\u003e\n\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n        \u003cscript type=\"application\/ld+json\"\u003e\n        {\n            \"@context\": \"https:\/\/schema.org\",\n            \"@type\": \"FAQPage\",\n            \"mainEntity\": [\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What devices is the Raymarine SeaTalkng power cable compatible with?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"It's fully compatible with the CP100 Sonar Sounder Module and extends to Raymarine Evolution autopilots, i-series instruments, and other SeaTalkng networked gear like radars and multifunction displays.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How long is the SeaTalkng power cable?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"The cable measures 3.2 feet, ideal for short runs from battery to network in compact consoles or as an inline power lead.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Does this cable supply power to the entire SeaTalkng network?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Yes, it delivers 12-volt DC power directly to the SeaTalkng backbone or spurs, energizing all connected devices from a single battery source.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Is the cable suitable for harsh marine environments?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Absolutely—built with rugged, corrosion-resistant materials and secure connectors to endure saltwater, UV rays, and vibrations common in boating.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How do I install the Raymarine A06049 power cable?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Attach ring terminals to your 12V battery or breaker, route safely avoiding heat sources, and plug into the SeaTalkng white connector. Test voltage at both ends for a secure setup.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What color is the power cable and why does it matter?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Black and red insulation clearly indicates polarity (red positive, black negative), preventing reverse connections that could damage electronics.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Can I use this cable with non-Raymarine NMEA 2000 devices?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"While optimized for SeaTalkng, it works with any NMEA 2000 network via adapters, but best performance comes with Raymarine components.\"\n                    }\n                }\n            ]\n        }\n        \u003c\/script\u003e\n\n        \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat devices is the Raymarine SeaTalkng power cable compatible with?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt's fully compatible with the CP100 Sonar Sounder Module and extends to Raymarine Evolution autopilots, i-series instruments, and other SeaTalkng networked gear like radars and multifunction displays.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow long is the SeaTalkng power cable?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eThe cable measures 3.2 feet, ideal for short runs from battery to network in compact consoles or as an inline power lead.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eDoes this cable supply power to the entire SeaTalkng network?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, it delivers 12-volt DC power directly to the SeaTalkng backbone or spurs, energizing all connected devices from a single battery source.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eIs the cable suitable for harsh marine environments?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAbsolutely—built with rugged, corrosion-resistant materials and secure connectors to endure saltwater, UV rays, and vibrations common in boating.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow do I install the Raymarine A06049 power cable?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAttach ring terminals to your 12V battery or breaker, route safely avoiding heat sources, and plug into the SeaTalkng white connector. Test voltage at both ends for a secure setup.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat color is the power cable and why does it matter?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eBlack and red insulation clearly indicates polarity (red positive, black negative), preventing reverse connections that could damage electronics.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eCan I use this cable with non-Raymarine NMEA 2000 devices?\u003c\/h3\u003e\n            \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eWhile optimized for SeaTalkng, it works with any NMEA 2000 network via adapters, but best performance comes with Raymarine components.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A06049 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eCP100 Sonar Sounder Module\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eConnector Type: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eSeaTalkNG\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3.2 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\/ Red\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A06049 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Use\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine A06049 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003ePower Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine Power Cable for SeaTalk\u003csup\u003eng\u003c\/sup\u003e \u003cbr\u003e\u003cbr\u003eA06049, straight power cable, 6.56'A cable, used to connect the SeaTalkng backbone network to a 12V switching power supply. This can power the entire network and connected devices. only ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-33173\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A06049\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060490\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677587058781,"sku":"CWR-33173","price":36.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-power-cable-f-1.jpg?v=1673145322"},{"product_id":"44285-raymarine-adapter-cable-e-series-to-seatalkng","title":"Raymarine Adapter Cable E-Series to SeaTalk\u003csup\u003eng\u003c\/sup\u003e","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Integration for Your E-Series Displays\u003c\/h2\u003e\n    \u003cp\u003eUpgrading your marine electronics setup doesn't have to mean replacing everything. This specialized adapter cable bridges the gap between legacy Raymarine E-Series multifunction displays and modern SeaTalk\u003csup\u003eng\u003c\/sup\u003e networks effortlessly. By plugging into the SeaTalk2 port on the rear of your E-Series unit, it creates a reliable spur connection to the backbone of a SeaTalk\u003csup\u003eng\u003c\/sup\u003e system. At 1.5 meters, it offers just the right length for clean, clutter-free installations without excess cable dangling in tight console spaces.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're adding new sensors like transducers, autopilots, or instruments to an existing E-Series chartplotter, this cable ensures full data sharing across your network. No more isolated displays—get GPS, depth, speed, and heading info flowing smoothly to every compatible device on board.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Stand Out\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e No complex wiring or terminators needed; simply connect and power up for instant network access.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Marine-grade materials withstand saltwater exposure, UV rays, and vibrations from rough seas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSpur Cable Efficiency:\u003c\/strong\u003e Acts as a drop from the SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone, minimizing signal loss and supporting up to 50 meters of total network length when combined properly.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBackward Compatibility:\u003c\/strong\u003e Perfect for mixed fleets where older E-Series (like E7, E9, or C\/E-Series variants) coexist with newer Axiom or A-Series units.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility Across Raymarine Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eThis adapter shines in setups with E-Series displays from the gS, eS, or classic lines. It pairs seamlessly with SeaTalk\u003csup\u003eng\u003c\/sup\u003e devices such as Evolution autopilots, Quantum radars, RV digital sounders, and i40\/i50\/i60 instrument packs. Ensure your backbone uses genuine Raymarine T-pieces and terminators for optimal performance—common pitfalls like reversed polarity or missing drops often stem from third-party mismatches.\u003c\/p\u003e\n    \n    \u003cp\u003ePro Tip: If your E-Series is running Lighthouse II or earlier software, a quick firmware check via the display's menu can enhance network stability before connecting.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStep-by-Step Installation for Flawless Setup\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down all devices and disconnect batteries to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003eLocate the SeaTalk2 port (yellow RJ45-style) on the back of your E-Series display.\u003c\/li\u003e\n      \u003cli\u003eAttach one end of the adapter cable firmly into this port.\u003c\/li\u003e\n      \u003cli\u003eConnect the other end to a SeaTalk\u003csup\u003eng\u003c\/sup\u003e spur socket on your backbone or powered T-piece.\u003c\/li\u003e\n      \u003cli\u003eSecure cables with ties or glands to prevent snags; route away from engines and exhausts.\u003c\/li\u003e\n      \u003cli\u003ePower up sequentially: backbone first, then displays. Watch for the green LED on the T-piece to confirm link-up.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eTime investment: Under 10 minutes for most installs. If the network light blinks erratically, double-check connections—it's usually a loose spur or unpowered drop.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust This Adapter for Long-Term Reliability\u003c\/h2\u003e\n    \u003cp\u003eIn real-world conditions—from coastal cruising to offshore passages—this cable delivers uninterrupted data flow that keeps you informed and safe. It eliminates the hassle of custom NMEA 0183 converters, saving hours of troubleshooting. Users report crystal-clear sonar overlays on E-Series screens from networked DST800 transducers, or synchronized autopilot courses with external compasses.\u003c\/p\u003e\n    \n    \u003cp\u003eCompared to full network overhauls, it's a cost-effective way to future-proof your helm without downtime. Saltwater veterans appreciate how it handles engine vibrations better than generic adapters, reducing dropouts during heavy weather.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan this adapter connect multiple E-Series displays to one SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, add multiple spur cables along the backbone, but limit to one per display and keep total spurs under network guidelines for best signal integrity.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it require additional power supplies?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, it draws power from the SeaTalk\u003csup\u003eng\u003c\/sup\u003e backbone via the powered T-piece, simplifying your wiring.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it compatible with Raymarine Dragonfly or Axiom series?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt primarily links E-Series to SeaTalk\u003csup\u003eng\u003c\/sup\u003e, but Axiom units on the same network will share data indirectly through the backbone.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if my network isn't detecting the E-Series display?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eVerify terminators at both backbone ends, ensure 12V power to the T-piece, and reseat all connections. Software mismatches can also cause issues—update via USB if needed.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does it handle high-speed data like radar overlays?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eExcellent for Quantum or HD radars; the SeaTalk\u003csup\u003eng\u003c\/sup\u003e protocol supports fast Ethernet-like speeds for smooth ARPA targets and chart syncing on E-Series screens.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I extend the cable length beyond 1.5M?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eUse additional SeaTalk\u003csup\u003eng\u003c\/sup\u003e spur extension cables, but stay under 15M per drop to avoid voltage drops and data errors.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this adapter connect multiple E-Series displays to one SeaTalkng backbone?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, add multiple spur cables along the backbone, but limit to one per display and keep total spurs under network guidelines for best signal integrity.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it require additional power supplies?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, it draws power from the SeaTalkng backbone via the powered T-piece, simplifying your wiring.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is it compatible with Raymarine Dragonfly or Axiom series?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It primarily links E-Series to SeaTalkng, but Axiom units on the same network will share data indirectly through the backbone.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my network isn't detecting the E-Series display?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Verify terminators at both backbone ends, ensure 12V power to the T-piece, and reseat all connections. Software mismatches can also cause issues—update via USB if needed.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does it handle high-speed data like radar overlays?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Excellent for Quantum or HD radars; the SeaTalkng protocol supports fast Ethernet-like speeds for smooth ARPA targets and chart syncing on E-Series screens.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I extend the cable length beyond 1.5M?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Use additional SeaTalkng spur extension cables, but stay under 15M per drop to avoid voltage drops and data errors.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eAdapter Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine adapter spur cable to connect an E-series display to a SeaTalk\u003csup\u003eng\u003c\/sup\u003enetwork, using the SeaTalk2 port on the back of the E-Series, 1.5M \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-33174\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A06061\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193060612\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677587091549,"sku":"CWR-33174","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-adapter-cable-e-1.jpg?v=1673145327"},{"product_id":"46058-raymarine-digital-radar-cable-f-domes-arrays","title":"Raymarine Digital Radar Cable f\/Domes \u0026 Arrays - 5m","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Marine Radar Setup with Reliable Connectivity\u003c\/h2\u003e\n    \u003cp\u003eConnecting your HD or Super HD radar antenna to the display unit demands nothing short of precision-engineered cabling. This 5-meter digital radar cable steps up to ensure seamless signal transmission, preserving the crisp clarity and fast refresh rates that Raymarine radars are known for. Whether you're navigating foggy coastal waters or scanning for fish in open seas, a dependable cable like this minimizes interference and maintains peak performance even in salty, spray-lashed conditions.\u003c\/p\u003e\n    \n    \u003cp\u003eBoaters often overlook cables, but they're the unsung heroes of radar systems. Subpar wiring can introduce noise, degrade range detection, or cause intermittent dropouts—issues that vanish with marine-grade construction. This cable's rugged shielding and connectors withstand vibration from rough waves, UV exposure, and temperature swings, delivering years of trouble-free service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Fit for Domes and Open Arrays\u003c\/h2\u003e\n    \u003cp\u003eDesigned specifically for Raymarine's HD and Super HD radar antennas, this cable supports both compact dome scanners and larger open-array models. Its versatility shines in various vessel sizes—from sportfishing boats to larger yachts—where installation space varies. The 16.4-foot length strikes an ideal balance: long enough for flexible routing around masts, bulkheads, or consoles, yet short enough to avoid excessive signal attenuation.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSeamless Integration:\u003c\/strong\u003e Plugs directly into Raymarine multifunction displays and processors without adapters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeatherproof Build:\u003c\/strong\u003e IPX6-rated connectors resist corrosion from saltwater immersion.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow-Loss Transmission:\u003c\/strong\u003e Optimized impedance ensures high-bandwidth digital signals travel undistorted.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust This Cable for Peak Radar Performance\u003c\/h2\u003e\n    \u003cp\u003eIn the demanding marine world, radar isn't just a luxury—it's a safety essential. This cable bolsters that reliability by facilitating quick target acquisition and accurate echo returns. Anglers appreciate how it supports detailed clutter rejection, revealing bait balls hidden in sea foam. Cruisers value the stable connection during autopilot maneuvers in low visibility.\u003c\/p\u003e\n    \n    \u003ch3\u003eInstallation Made Straightforward\u003c\/h3\u003e\n    \u003cp\u003eNo need for specialized tools or marine electricians. Pre-terminated ends with secure locking mechanisms snap into place. Route it through existing conduits, secure with cable ties, and test—your radar's online in under an hour. Pro tip: Apply dielectric grease to connectors for extra protection against moisture ingress.\u003c\/p\u003e\n    \n    \u003ch3\u003eLong-Term Durability in Harsh Conditions\u003c\/h3\u003e\n    \u003cp\u003eEngineered with double-shielded twisted pairs and abrasion-resistant jacket, it shrugs off chafing from deck hardware. Regular inspections—checking for frays or loose pins—extend its life, often beyond the standard warranty period.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eUser Experiences and Practical Tips\u003c\/h2\u003e\n    \u003cp\u003eSkippers upgrading from analog radars rave about the digital clarity this cable unlocks, noting fewer false echoes and sharper bearings. For multi-antenna setups, daisy-chaining compatibility keeps wiring tidy. Maintain signal quality by avoiding sharp bends (minimum radius 4 inches) and keeping runs away from high-power VHF antennas.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable compatible with all Raymarine HD radar domes?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it works seamlessly with Raymarine HD and Super HD dome scanners, as well as compatible open arrays, ensuring full digital signal integrity.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow long is the cable in practical terms for boat installation?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eMeasuring 5 meters or 16.4 feet, it's ideal for most console-to-mast runs without needing extensions that could compromise signal quality.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it support high-speed digital radar features?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, the cable is built for Raymarine's digital protocols, supporting fast scan rates and high-resolution imaging without data loss.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs installation DIY-friendly for average boaters?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, with plug-and-play connectors and flexible sheathing, most users complete setup in minutes using basic tools like cable clips.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does it hold up in extreme marine environments?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eFeaturing rugged, UV-resistant materials and waterproof seals, it's proven in saltwater spray, heavy rain, and temperature extremes from -25°C to 70°C.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this cable for Super HD open arrays?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's fully compatible with Super HD arrays, delivering the bandwidth needed for enhanced target separation and longer range detection.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat maintenance does the cable require?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eMinimal—visually inspect annually for wear, clean connectors with fresh water, and apply marine grease to prevent corrosion.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this cable compatible with all Raymarine HD radar domes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it works seamlessly with Raymarine HD and Super HD dome scanners, as well as compatible open arrays, ensuring full digital signal integrity.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long is the cable in practical terms for boat installation?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Measuring 5 meters or 16.4 feet, it's ideal for most console-to-mast runs without needing extensions that could compromise signal quality.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it support high-speed digital radar features?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely, the cable is built for Raymarine's digital protocols, supporting fast scan rates and high-resolution imaging without data loss.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is installation DIY-friendly for average boaters?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, with plug-and-play connectors and flexible sheathing, most users complete setup in minutes using basic tools like cable clips.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How does it hold up in extreme marine environments?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Featuring rugged, UV-resistant materials and waterproof seals, it's proven in saltwater spray, heavy rain, and temperature extremes from -25°C to 70°C.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this cable for Super HD open arrays?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it's fully compatible with Super HD arrays, delivering the bandwidth needed for enhanced target separation and longer range detection.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What maintenance does the cable require?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Minimal—visually inspect annually for wear, clean connectors with fresh water, and apply marine grease to prevent corrosion.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eFor more than 80 years, Raymarine have been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range includes chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A55076 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHD\/ Super HD Radar Antenna\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16.4 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A55076 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With HD\/ Super HD Radar Antenna\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDigital Radar Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 5m Digital Radar Cable is for both domes and arrays. \u003cbr\u003e\u003cbr\u003eRaymarine's digital radar cable is suitable for dome and array. The product is made of high-quality materials and can provide you with many years of service. Use the most advanced design...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34947\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A55076D\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550823\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677588795485,"sku":"34947","price":205.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-digital-radar-cable-1_be55d6e0-6b72-4437-a2b5-b69e11928569.jpg?v=1673145365"},{"product_id":"46059-raymarine-digital-radar-cable-f-domes-arrays","title":"Raymarine Digital Radar Cable f\/Domes \u0026 Arrays - 25m","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Vessel's Radar Performance with Reliable Connectivity\u003c\/h2\u003e\n    \u003cp\u003eNavigating challenging waters demands precision and trust in your marine electronics. This 25-meter SeaTalkhs digital radar cable delivers seamless, high-speed communication between your Digital or HD Digital radar antennas—whether domes or open arrays—and your multifunction display. Engineered for the harsh marine environment, it ensures uninterrupted data flow, giving you clearer target detection and safer passages day or night.\u003c\/p\u003e\n    \u003cp\u003eUnlike standard cables, this specialized connection supports Raymarine's advanced radar technologies, minimizing signal loss over distance and maximizing the full potential of your setup. Boaters who upgrade to this cable often report sharper imagery and faster refresh rates, transforming how they interpret radar returns in fog, rain, or cluttered harbors.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Stand Out on the Water\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended 25-Meter Reach:\u003c\/strong\u003e Perfect for larger vessels where your display and radar scanner are positioned far apart, without compromising performance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSeaTalkhs High-Speed Network:\u003c\/strong\u003e Handles massive radar data volumes with low latency, enabling real-time updates essential for collision avoidance and fishing spot identification.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Marine-Grade Build:\u003c\/strong\u003e Features waterproof, corrosion-resistant connectors that withstand salt spray, UV exposure, and constant vibration from rough seas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e Direct compatibility with Raymarine Digital and HD Digital systems, simplifying setup without custom adapters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShielded Construction:\u003c\/strong\u003e Reduces electromagnetic interference from onboard electronics, ensuring clean signals even near radios or engines.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Raymarine Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eThis cable integrates flawlessly with a wide range of Raymarine multifunction displays, including popular e-Series, c-Series, and g-Series models. It's tailored for both radome domes like the RD218 and open-array scanners such as the HD Digital 4-foot array. If you're running Quantum or older analog radars, double-check your system's requirements—this is optimized for digital-era performance.\u003c\/p\u003e\n    \u003cp\u003ePro Tip: Pair it with Raymarine's Pathfinder series for next-level radar overlay on charts, where every meter of cable length counts toward maintaining peak resolution.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Benefits for Serious Mariners\u003c\/h2\u003e\n    \u003cp\u003eInvesting in quality cabling like this isn't just about connection—it's about peace of mind. Captains praise its ability to deliver consistent high-definition echoes, spotting small targets like buoys or debris from afar. In busy shipping lanes, the reliable link prevents dropouts that could lead to costly mistakes.\u003c\/p\u003e\n    \u003cp\u003eFor offshore anglers, the stable data stream supports advanced features like bird mode or SAR operations, helping you locate bait schools or vessels in distress efficiently. Long-term, its durability cuts down on replacements, saving time and hassle during critical voyages.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation and Pro Tips\u003c\/h2\u003e\n    \u003cp\u003eRoute the cable through existing conduits or along bulkheads, securing with cable ties every 18 inches to avoid chafing. Connect one end to the radar unit's SeaTalkhs port and the other to your display's dedicated radar input—power cycle to verify. Always test in open water before heading out.\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eInspect endpoints for damage before installation.\u003c\/li\u003e\n      \u003cli\u003eUse heat-shrink tubing on junctions for extra waterproofing.\u003c\/li\u003e\n      \u003cli\u003eLabel both ends for quick troubleshooting later.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eCommon pitfall: Over-tightening fittings—hand-tight plus a quarter turn is ideal to preserve seals.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintaining Peak Performance Over Time\u003c\/h2\u003e\n    \u003cp\u003eRinse with fresh water after saltwater exposure and store coiled loosely to prevent kinks. Annually, check connectors for corrosion using a soft brush and dielectric grease. This simple routine extends lifespan, keeping your radar sharp season after season.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat types of Raymarine radars does this 25m cable support?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's designed for Digital and HD Digital radar domes and arrays, connecting via SeaTalkhs to multifunction displays for optimal performance.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for open-array radars?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it works with both radomes and open arrays in Raymarine's Digital and HD Digital lineup, handling the data demands of larger scanners.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does SeaTalkhs differ from standard SeaTalk?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSeaTalkhs is a high-speed network—up to 10 times faster—ideal for bandwidth-heavy radar data, unlike slower SeaTalk for basic NMEA connections.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this cable on smaller boats?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely, though the 25m length suits mid-to-large vessels. For shorter runs, coil excess neatly to avoid signal issues.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if my display lacks a SeaTalkhs port?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eEnsure your multifunction display supports SeaTalkhs, common in newer Raymarine models. Older units may need a network switch.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow waterproof is this radar cable?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt features IPX6-rated connectors, fully sealed against heavy spray and submersion, built for relentless marine conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it interfere with other electronics?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, its shielded design minimizes EMI, ensuring clean radar data alongside VHF, AIS, or autopilot systems.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eDigital Radar Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 25m Digital Radar Cable is for both domes and arrays. \u003cbr\u003e\u003cbr\u003e\"Raymarine A55079 Network Accessories25 Meter - SeaTalkhs Radar Cable for connecting Digital and HD Digital Radar Antennas to your multifunction display RAYMARINE 25M DIGITAL RADAR CABLE Normalized SKU: A55079UPC Code: 723193550793\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34948\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A55079D\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550793\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677588959325,"sku":"34948","price":359.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-digital-radar-cable-1_c81820d7-7d71-4636-b0a2-e2675b10317b.jpg?v=1673145369"},{"product_id":"46060-raymarine-digital-radar-extension-cable-f-domes","title":"Raymarine Digital Radar Extension Cable f\/Domes \u0026 Arrays - 5m","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eExtending your Raymarine HD or Super HD radar setup just got simpler with this purpose-built 5-meter digital extension cable. Designed specifically for domes and open arrays, it bridges the gap between your radar antenna and processing unit, giving you the flexibility to position your gear exactly where it performs best—without signal loss or hassle. Boaters know that every extra foot of quality cabling can mean the difference between a cluttered helm and a streamlined, professional install.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy This Extension Cable Elevates Your Radar System\u003c\/h2\u003e\n    \u003cp\u003eIn the demanding world of marine navigation, reliability isn't optional. This cable stands out by maintaining crisp digital signals over its full 16.4-foot length, ensuring your radar scans deliver the clarity and range you rely on for safe passage through fog, night runs, or crowded harbors.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSeamless Signal Integrity:\u003c\/strong\u003e Engineered to preserve high-definition radar data, preventing degradation that plagues lesser cables.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Fit:\u003c\/strong\u003e Perfect for both compact dome scanners and larger open-array antennas on sailboats, power yachts, or fishing vessels.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBattle-Tested Durability:\u003c\/strong\u003e Wrapped in rugged, marine-grade shielding that shrugs off saltwater spray, UV exposure, and constant vibration.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Routing:\u003c\/strong\u003e Slim profile and flexible design slip easily through tight conduits or along deck runs, saving hours during setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eStreamlined Installation for Any Skill Level\u003c\/h2\u003e\n    \u003cp\u003ePicture this: You're prepping for a long offshore trip, and radar placement is tricky due to mast height or arch positioning. This extension cable steps in as your ally. Start by powering down your system, disconnect the existing short cable at both ends, and plug this one straight in—it's plug-and-play with Raymarine's digital connectors. Secure with zip ties or cable clips every 18-24 inches to avoid chafing, and you're scanning in minutes. Pro tip: Route away from high-power sources like engines or VHF antennas to minimize interference, keeping your returns pinpoint accurate.\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower off radar and display unit.\u003c\/li\u003e\n      \u003cli\u003eUnplug antenna and processor cables.\u003c\/li\u003e\n      \u003cli\u003eConnect extension securely at both ends.\u003c\/li\u003e\n      \u003cli\u003eTest boot-up and scan patterns.\u003c\/li\u003e\n      \u003cli\u003eRoute and secure for weatherproofing.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eCommon pitfalls? Over-tightening fittings—finger-tight plus a quarter turn does it—or ignoring drip loops to shed water. Get it right, and it'll serve seasons without a glitch.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-insights\"\u003e\n    \u003ch2\u003ePerfect Match for HD and Super HD Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eThis isn't a one-size-fits-all accessory. It's tailored for Raymarine's HD digital radar lineup, including popular dome models like the 18-inch or 24-inch variants and Super HD open arrays that deliver bird-detection precision. If you're running an older analog system, this digital cable won't interface—stick to matched tech for peak performance. It shines in multi-station setups too, letting you daisy-chain displays across the boat without compromising speed or resolution.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Care to Keep Scans Sharp\u003c\/h2\u003e\n    \u003cp\u003eInvest once, maintain forever. Annually inspect for frays or corrosion at endpoints, especially where cables meet deck fittings. A quick freshwater rinse after salt exposure and silicone grease on connectors wards off oxidation. In storage, coil loosely to avoid kinks—think figure-8 pattern. These habits extend life beyond the standard coverage, ensuring your radar remains a trusted watchman.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What radars is this 5m extension cable compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for Raymarine HD and Super HD digital radar antennas, including both domes and open arrays. Not suitable for analog or Quantum-series radars.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How long is the Raymarine A55080D cable in feet?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The cable measures 5 meters, or precisely 16.4 feet, offering ample reach for most vessel configurations.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation difficult for this digital radar cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, it's plug-and-play. Disconnect the original cable, attach this extension at the antenna and processor ends, route neatly, and test. No special tools required.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this cable handle harsh marine conditions?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely. Marine-grade construction resists saltwater, UV rays, and vibration, proven in professional and recreational fleets worldwide.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it support multiple display units?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it maintains full digital signal integrity for networked Raymarine systems, allowing seamless sharing across compatible multifunction displays.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my radar setup needs even longer cabling?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Raymarine offers longer options, but avoid exceeding max lengths per model to prevent signal drop. Consult specs for your antenna.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I clean and store the cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Rinse with fresh water post-use, dry thoroughly, and store coiled loosely in a cool, dry spot. Inspect connectors yearly.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat radars is this 5m extension cable compatible with?\u003c\/h3\u003e\n        \u003cp\u003eIt's designed for Raymarine HD and Super HD digital radar antennas, including both domes and open arrays. Not suitable for analog or Quantum-series radars.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow long is the Raymarine A55080D cable in feet?\u003c\/h3\u003e\n        \u003cp\u003eThe cable measures 5 meters, or precisely 16.4 feet, offering ample reach for most vessel configurations.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs installation difficult for this digital radar cable?\u003c\/h3\u003e\n        \u003cp\u003eNo, it's plug-and-play. Disconnect the original cable, attach this extension at the antenna and processor ends, route neatly, and test. No special tools required.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan this cable handle harsh marine conditions?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely. Marine-grade construction resists saltwater, UV rays, and vibration, proven in professional and recreational fleets worldwide.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDoes it support multiple display units?\u003c\/h3\u003e\n        \u003cp\u003eYes, it maintains full digital signal integrity for networked Raymarine systems, allowing seamless sharing across compatible multifunction displays.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat if my radar setup needs even longer cabling?\u003c\/h3\u003e\n        \u003cp\u003eRaymarine offers longer options, but avoid exceeding max lengths per model to prevent signal drop. Consult specs for your antenna.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I clean and store the cable?\u003c\/h3\u003e\n        \u003cp\u003eRinse with fresh water post-use, dry thoroughly, and store coiled loosely in a cool, dry spot. Inspect connectors yearly.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, Raymarine have been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range includes chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A55080 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eHD\/ Super HD Radar Antenna\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16.4 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A55080 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With HD\/ Super HD Radar Antenna\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDigital Radar Extension Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 5m Digital Radar Extension Cable is for both domes and arrays. \u003cbr\u003e\u003cbr\u003eRaymarine's digital radar extension cable is suitable for dome cameras and arrays. The product is made of high-quality materials and can provide you with many years of service. Design with state tables\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34949\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A55080D\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550878\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677589024861,"sku":"34949","price":222.29,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-digital-radar-extension-1.jpg?v=1673145371"},{"product_id":"46061-raymarine-digital-radar-extension-cable-f-domes","title":"Raymarine Digital Radar Extension Cable f\/Domes \u0026 Arrays - 10m","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003cp\u003eExtending the reach of your marine radar system opens up new possibilities for mounting flexibility on your vessel. Whether you're dealing with a compact radome or a powerful open array, this 10-meter digital extension cable ensures seamless connectivity without compromising performance. Designed specifically for Raymarine's digital lineup, it bridges the gap between your radar scanner and pathfinder display, letting you position your gear exactly where it performs best—farther from sensitive electronics or up high for optimal scanning.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted with marine-grade durability in mind, this cable withstands the harsh saltwater environment, vibration from rough seas, and constant exposure to the elements. No more worrying about signal degradation over distance; its digital construction preserves every bit of radar data integrity, delivering crisp, reliable returns even at full extension.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eGenerous 10-Meter Length:\u003c\/strong\u003e Provides ample room for creative installations on sailboats, power yachts, or fishing vessels without needing multiple adapters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDigital Signal Optimization:\u003c\/strong\u003e Engineered for Raymarine's digital radomes and HD\/SHD open arrays, ensuring low-loss transmission and high-resolution imaging.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e Double-shielded to block interference from nearby radios, motors, or other onboard systems.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connectors:\u003c\/strong\u003e Raymarine's proprietary waterproof fittings snap securely into place, making swaps or extensions hassle-free.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Flexible:\u003c\/strong\u003e Easy to route through tight spaces like mast wiring runs or console bulkheads.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust This Extension for Their Radar\u003c\/h2\u003e\n    \u003cp\u003ePicture this: You're out on a foggy dawn patrol, and your radar needs to scan unobstructed from the highest vantage point. Short cables limit your options, forcing suboptimal placements that clutter your helm or expose wiring to damage. This extension solves that by giving you the freedom to optimize—mount the dome aft on a fishing trawler or elevate an array on a sportfisher's tuna tower.\u003c\/p\u003e\n    \n    \u003cp\u003eUnlike generic cables that introduce noise or dropouts, Raymarine's digital design maintains pulse compression and FMCW technology fidelity. It's not just about length; it's about keeping your collision avoidance, bird detection, and weather tracking razor-sharp. Anglers love it for marking bait balls precisely, while cruisers rely on it for safe navigation in crowded anchorages.\u003c\/p\u003e\n    \n    \u003cp\u003eBuilt to last seasons of heavy use, it features UV-resistant jackets and tinned copper conductors that resist corrosion—essential for any saltwater setup.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Compatibility with Raymarine Systems\u003c\/h2\u003e\n    \u003cp\u003eThis cable pairs perfectly with a range of digital radomes like the compact 18-inch or 24-inch models, and scales up to HD and SuperHD open arrays in 24-, 36-, or 48-inch sizes. It integrates flawlessly with Pathfinder Plus, Axiom, and Element multifunction displays, supporting features like Dual Range and VelocityTrack Doppler processing.\u003c\/p\u003e\n    \n    \u003cp\u003eBefore installing, double-check your scanner's model—it's tailored for digital-only units, so it won't work with legacy analog systems. This ensures plug-and-play simplicity right out of the box.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eInstallation Tips from Seasoned Installers\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePlan your route: Measure twice, avoiding sharp bends or heat sources to preserve signal quality.\u003c\/li\u003e\n      \u003cli\u003eSecure properly: Use cable ties and conduit for chafe protection in high-traffic areas.\u003c\/li\u003e\n      \u003cli\u003eTest thoroughly: Power up post-install and run a full 360-degree sweep to verify no blind spots.\u003c\/li\u003e\n      \u003cli\u003eWeatherproof joints: Apply dielectric grease to connectors for extra saltwater resistance.\u003c\/li\u003e\n      \u003cli\u003eLabel for future: Mark both ends to speed up troubleshooting down the line.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003eMost skippers handle this in under an hour with basic tools—no soldering or custom crimping required.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintaining Peak Performance Over Time\u003c\/h2\u003e\n    \u003cp\u003eRegular inspections keep it humming: Check for frays or water ingress annually, especially after stormy passages. Rinse with fresh water after every outing to flush salt buildup. Store spares coiled loosely to avoid kinks. With proper care, it'll outlast lesser cables, saving you replacement headaches.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What types of Raymarine radars is this 10m extension cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for digital radomes such as 18-inch and 24-inch models, plus HD and SHD digital open arrays in various sizes. It works with Pathfinder and Axiom series displays, but not analog radars.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable maintain full radar performance at 10 meters?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its digital shielding and construction ensure no signal loss, preserving range, resolution, and features like Dual Range scanning.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the cable waterproof and suitable for marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—featuring IPX6-rated connectors and UV-resistant sheathing, it's built to endure saltwater spray, submersion risks, and constant vibration.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this extension with open array radars?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's fully compatible with Raymarine HD and SuperHD open arrays, allowing flexible positioning without compromising rotation or data quality.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I install the extension cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Disconnect power, plug into the radar scanner and display unit, route securely, and test. No special tools needed beyond cable ties and grease for connectors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this cable introduce interference with other electronics?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, double-shielding blocks RFI from VHF radios, engines, or fishfinders, keeping your radar feed clean.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I daisy-chain multiple extensions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Raymarine recommends a single extension for optimal performance; consult manuals for total length limits to avoid any degradation.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat types of Raymarine radars is this 10m extension cable compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for digital radomes such as 18-inch and 24-inch models, plus HD and SHD digital open arrays in various sizes. It works with Pathfinder and Axiom series displays, but not analog radars.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this cable maintain full radar performance at 10 meters?\u003c\/summary\u003e\n        \u003cp\u003eYes, its digital shielding and construction ensure no signal loss, preserving range, resolution, and features like Dual Range scanning.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the cable waterproof and suitable for marine use?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—featuring IPX6-rated connectors and UV-resistant sheathing, it's built to endure saltwater spray, submersion risks, and constant vibration.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this extension with open array radars?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's fully compatible with Raymarine HD and SuperHD open arrays, allowing flexible positioning without compromising rotation or data quality.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I install the extension cable?\u003c\/summary\u003e\n        \u003cp\u003eDisconnect power, plug into the radar scanner and display unit, route securely, and test. No special tools needed beyond cable ties and grease for connectors.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill this cable introduce interference with other electronics?\u003c\/summary\u003e\n        \u003cp\u003eNo, double-shielding blocks RFI from VHF radios, engines, or fishfinders, keeping your radar feed clean.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I daisy-chain multiple extensions?\u003c\/summary\u003e\n        \u003cp\u003eRaymarine recommends a single extension for optimal performance; consult manuals for total length limits to avoid any degradation.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description-content { font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif; line-height: 1.6; color: #333; max-width: 800px; margin: 0 auto; }\n  .product-description-content h2 { font-size: 1.5em; margin: 2em 0 1em; color: #2c3e50; border-bottom: 2px solid #3498db; padding-bottom: 0.5em; }\n  .product-description-content ul, .product-description-content ol { padding-left: 1.5em; }\n  .product-description-content li { margin-bottom: 0.5em; }\n  .faqs-section details { margin-bottom: 1em; border: 1px solid #ddd; border-radius: 8px; padding: 1em; }\n  .faqs-section summary { font-weight: bold; cursor: pointer; list-style: none; }\n  .faqs-section summary::-webkit-details-marker { display: none; }\n  .faq-list { margin-top: 1em; }\n\u003c\/style\u003e\u003cb\u003eDigital Radar Extension Cable\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eRaymarine's 10m Digital Radar Extension Cable is for both domes and arrays. \u003cbr\u003e\u003cbr\u003eThere are a male and a female radar connector at both ends. All digital radar cables are listed below. We have the new \"RayNet\" radar cable and select the available...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34950\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A55081D\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193550885\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677589123165,"sku":"CWR-34950","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-digital-radar-extension-1_9fe30594-e7be-4176-9d62-4be8c494d1c1.jpg?v=1673145374"},{"product_id":"47051-raymarine-a62245-seatalk-high-speed-dual-end","title":"Raymarine A62245 SeaTalk High Speed Dual End Weatherproof","description":"SeaTalkHS  Dual End Weatherproof Network Cable 1.5m\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eEnhance Your Raymarine Network with the SeaTalk HS Dual-End Weatherproof Cable\u003c\/h2\u003e\n  \u003cp\u003eConnecting your marine electronics seamlessly is crucial for safe and efficient boating. The Raymarine SeaTalk High Speed Dual End Weatherproof cable steps in as a vital link, designed specifically to bridge multifunction displays and other components in your onboard system. Measuring 1.5 meters (about 4.92 feet), this black and gray cable supports high-speed data transfer, ensuring that critical information from radar, sonar, charts, and instruments flows without interruption—even in the punishing marine environment.\u003c\/p\u003e\n  \n  \u003cp\u003eBoaters know the frustration of unreliable connections that falter under spray, salt, and vibration. This cable eliminates those worries with its dual-end design, allowing straightforward plug-and-play integration between compatible Raymarine units. Whether you're wiring up a new installation or replacing an aging cable, it delivers the performance you need for real-time navigation and situational awareness on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Specifications Tailored for Marine Demands\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e Precisely 1.5 meters for optimal helm-to-display routing without excess slack.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e Dual-end SeaTalk HS plugs for direct compatibility with Raymarine multifunction displays.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Fully weatherproof construction resists UV exposure, corrosion, and submersion.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor Scheme:\u003c\/strong\u003e Sleek black and gray finish blends discreetly with modern console aesthetics.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eThese specs aren't just numbers—they translate to dependable operation across diverse conditions, from coastal cruises to offshore adventures.\u003c\/p\u003e\n\n  \u003ch2\u003eUnmatched Reliability in Harsh Marine Conditions\u003c\/h2\u003e\n  \u003cp\u003eRaymarine's engineering shines through in this cable's rugged build. Crafted to endure the relentless assault of saltwater, extreme temperatures, and constant motion, it maintains signal integrity where lesser cables fail. High-speed SeaTalk HS networking demands precision; any signal degradation can mean delayed radar sweeps or chart updates, potentially compromising safety.\u003c\/p\u003e\n  \n  \u003cp\u003eUsers report years of trouble-free service, even on vessels pounding through choppy seas. The weatherproof seals prevent moisture ingress, while the flexible yet tough jacket withstands repeated flexing during helm adjustments or rough rides. This longevity reduces downtime and keeps your focus on the horizon, not on troubleshooting.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Compatibility with Raymarine Ecosystems\u003c\/h2\u003e\n  \u003cp\u003eOptimized for Raymarine multifunction displays, this cable integrates effortlessly with E-Series, C-Series Widescreen, and G-Series systems. It supports the expansion of your network, linking multiple displays, instruments, and peripherals into a unified setup. Imagine sharing AIS data, engine telemetry, or sonar images across stations without latency— that's the power of a solid SeaTalk HS backbone.\u003c\/p\u003e\n  \n  \u003cp\u003eFor upgrades, it's a smart choice when scaling from basic setups to advanced configurations, ensuring future-proof connectivity as you add radars or cameras.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Installation for DIY Boaters and Pros\u003c\/h2\u003e\n  \u003cp\u003eInstallation is a breeze, minimizing time at the dock. Simply plug one end into your primary display or network switch and the other into the target device. No special tools required—just route the cable through existing conduits or along bulkheads, securing with ties for a clean look.\u003c\/p\u003e\n  \n  \u003cp\u003e\u003cstrong\u003ePro Tips:\u003c\/strong\u003e\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003ePlan your route to avoid high-traffic areas and heat sources.\u003c\/li\u003e\n    \u003cli\u003eTest connections post-install by powering up and verifying data sync across devices.\u003c\/li\u003e\n    \u003cli\u003eLabel ends for quick identification during maintenance.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eThis user-friendly approach empowers weekend warriors to achieve professional results, saving on labor costs.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy This Cable Outperforms Standard Options\u003c\/h2\u003e\n  \u003cp\u003eIn a sea of generic cables, the SeaTalk HS Dual-End stands out for its purpose-built design. Off-the-shelf alternatives often lack the bandwidth for high-res radar feeds or the sealing for wet environments, leading to intermittent issues. This cable's high-performance backbone handles gigabit speeds, supporting HD radar, digital sounders, and video feeds without compromise.\u003c\/p\u003e\n  \n  \u003cp\u003eBoaters upgrading from older SeaTalk1 networks appreciate the speed boost, transforming sluggish systems into responsive powerhouses. It's not just a wire—it's the nerve center of your electronics suite.\u003c\/p\u003e\n\n  \u003ch2\u003eLong-Term Value and Peace of Mind\u003c\/h2\u003e\n  \u003cp\u003eInvesting in quality pays dividends over time. This cable's extended service life means fewer replacements and consistent performance season after season. Paired with Raymarine's commitment to marine-grade standards, it ensures your system remains cutting-edge amid evolving tech.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the length of the Raymarine A62245 SeaTalk HS cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The cable measures 1.5 meters, or approximately 4.92 feet, ideal for short runs between displays and network hubs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable compatible with all Raymarine displays?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine multifunction displays, particularly E-Series, C-Series Widescreen, and G-Series systems, ensuring plug-and-play connectivity.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How weatherproof is the Raymarine A62245 cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Fully weatherproof with sealed connectors, it resists water, salt, UV rays, and vibration, performing reliably in open-boat exposures.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this cable for high-speed data like radar?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, SeaTalk HS supports high-speed networking for radar, sonar, charts, and video, delivering low-latency performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the best way to install the dual-end SeaTalk HS cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Plug directly into compatible ports, route neatly avoiding heat and traffic, and test for full network sync—no tools needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable work with older Raymarine networks?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for SeaTalk HS (newer high-speed networks); for legacy SeaTalk1, adapters or converters may be required.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How durable is the cable in rough seas?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Engineered for marine extremes, its rugged jacket and flex-resistant design handle pounding waves and constant motion without signal loss.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat is the length of the Raymarine A62245 SeaTalk HS cable?\u003c\/h3\u003e\n      \u003cp\u003eThe cable measures 1.5 meters, or approximately 4.92 feet, ideal for short runs between displays and network hubs.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this cable compatible with all Raymarine displays?\u003c\/h3\u003e\n      \u003cp\u003eIt's designed for Raymarine multifunction displays, particularly E-Series, C-Series Widescreen, and G-Series systems, ensuring plug-and-play connectivity.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow weatherproof is the Raymarine A62245 cable?\u003c\/h3\u003e\n      \u003cp\u003eFully weatherproof with sealed connectors, it resists water, salt, UV rays, and vibration, performing reliably in open-boat exposures.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan I use this cable for high-speed data like radar?\u003c\/h3\u003e\n      \u003cp\u003eYes, SeaTalk HS supports high-speed networking for radar, sonar, charts, and video, delivering low-latency performance.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the best way to install the dual-end SeaTalk HS cable?\u003c\/h3\u003e\n      \u003cp\u003ePlug directly into compatible ports, route neatly avoiding heat and traffic, and test for full network sync—no tools needed.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes this cable work with older Raymarine networks?\u003c\/h3\u003e\n      \u003cp\u003eIt's optimized for SeaTalk HS (newer high-speed networks); for legacy SeaTalk1, adapters or converters may be required.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow durable is the cable in rough seas?\u003c\/h3\u003e\n      \u003cp\u003eEngineered for marine extremes, its rugged jacket and flex-resistant design handle pounding waves and constant motion without signal loss.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cstyle\u003e\n  .product-description {\n    line-height: 1.6;\n    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif;\n    max-width: 800px;\n  }\n  .product-description h2 {\n    color: #333;\n    border-bottom: 2px solid #007acc;\n    padding-bottom: 0.5rem;\n  }\n  .product-description h3 {\n    color: #555;\n  }\n  .faq-item {\n    margin-bottom: 1.5rem;\n    padding: 1rem;\n    background: #f8f9fa;\n    border-left: 4px solid #007acc;\n  }\n  ul {\n    padding-left: 1.5rem;\n  }\n  @media (max-width: 768px) {\n    .product-description {\n      font-size: 1rem;\n    }\n  }\n\u003c\/style\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine A62245 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Multi Function Display\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e4.92 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\/ Gray\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine A62245 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With Multi Function Display\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine A62245 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e SeaTalk high speed dual end weatherproof network cable - 1.5M \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-35940\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A62245\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 919750065248\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677589352541,"sku":"CWR-35940","price":85.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-a62245-seatalk-high-1.jpg?v=1673145384"},{"product_id":"47517-raymarine-bulkhead-fitting-kit-e15017","title":"Raymarine Bulkhead Fitting Kit E15017","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Autopilot Setup with Precision Mounting\u003c\/h2\u003e\n    \u003cp\u003eInstalling a reliable autopilot drive on your wheel-steered vessel demands hardware that stands up to harsh marine conditions while ensuring a secure, watertight fit. The Bulkhead Fitting Kit steps in as the essential component for mounting the drive unit directly through the bulkhead, delivering rock-solid stability without compromising your boat's integrity. Crafted for seamless integration, this kit transforms a complex retrofit into a straightforward upgrade, letting you focus on smooth sailing rather than endless adjustments.\u003c\/p\u003e\n    \u003cp\u003eBoat owners often struggle with loose fittings that lead to vibrations, misalignment, or leaks over time. This kit addresses those pain points head-on, using corrosion-resistant materials designed to endure saltwater exposure, UV rays, and constant motion. Whether you're outfitting a new installation or replacing worn parts on an older system, it provides the confidence that your autopilot will perform flawlessly during long passages.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Seamless Integration\u003c\/h2\u003e\n    \u003cp\u003eTailored specifically for the Raymarine 4000 mk2 Wheel Drive, this fitting kit ensures a plug-and-play experience. It aligns perfectly with the drive's mounting points, eliminating guesswork and reducing installation time. It's also versatile enough to work with a range of wheel-steered boats from 30 to 50 feet, making it a go-to choice for sailboats, power yachts, and offshore cruisers.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eDirect fit for Raymarine 4000 mk2 Wheel Drive units\u003c\/li\u003e\n      \u003cli\u003eCompatible with standard bulkhead thicknesses up to 2 inches\u003c\/li\u003e\n      \u003cli\u003eWorks alongside common steering pedestal setups\u003c\/li\u003e\n      \u003cli\u003eSupports retrofits on legacy autopilot systems\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003ePro tip: Always double-check your bulkhead material—fiberglass, wood, or aluminum all pair well, but reinforce thin sections for optimal load distribution during heavy weather steering.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStep-by-Step Installation Guide for DIY Confidence\u003c\/h2\u003e\n    \u003cp\u003eGetting your autopilot drive mounted doesn't require a marine yard overhaul. Here's a practical walkthrough to get you on the water faster:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrep the bulkhead:\u003c\/strong\u003e Mark the centerline of your steering shaft and trace the kit's template for precise hole placement. Use a hole saw for clean cuts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAssemble the fittings:\u003c\/strong\u003e Thread the flange and thru-hull components with marine-grade sealant, ensuring even torque to prevent leaks.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMount the drive:\u003c\/strong\u003e Secure the wheel drive to the fittings using the provided bolts. Align the output arm parallel to the wheel shaft for zero binding.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTest and seal:\u003c\/strong\u003e Cycle the autopilot through full lock-to-lock travel on land. Apply additional sealant around edges and bed the assembly firmly.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFinal checks:\u003c\/strong\u003e Monitor for play after a few outings; tighten as needed without over-stressing the threads.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThis process typically takes 2-4 hours for experienced installers, saving you from costly professional fees. Common pitfalls like misalignment are avoided with the kit's pre-drilled guides and adjustable spacers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy This Kit Outperforms Generic Alternatives\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine hardware, skimping on fittings can lead to catastrophic failures mid-voyage. This kit shines with its robust stainless steel construction—304-grade for the flanges and 316 for high-stress bolts—offering superior resistance to galvanic corrosion compared to off-the-shelf options. Users report zero slippage even under 40-knot winds and confused seas, where lesser kits fail.\u003c\/p\u003e\n    \u003cp\u003eBeyond durability, it minimizes vibration transmission to the helm, preserving your wheel bearings and enhancing overall steering feel. For liveaboard sailors or delivery captains, that translates to reliable performance season after season, with minimal upkeep.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eLong-Term Maintenance and Troubleshooting Tips\u003c\/h2\u003e\n    \u003cp\u003eKeep your setup running like new with simple habits:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eInspect fittings annually for crevice corrosion; rinse with fresh water after every saltwater outing.\u003c\/li\u003e\n      \u003cli\u003eLubricate pivot points with waterproof grease to prevent seizing.\u003c\/li\u003e\n      \u003cli\u003eIf you notice helm feedback, check for debris in the thru-hull path—clear it immediately.\u003c\/li\u003e\n      \u003cli\u003eFor unusual noises, verify bolt torque specs to rule out loosening from wave impacts.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese steps extend the kit's lifespan well beyond five years, often matching your autopilot drive's endurance.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What boats is the Bulkhead Fitting Kit designed for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's ideal for wheel-steered sailboats and powerboats from 30 to 50 feet, especially those using the Raymarine 4000 mk2 Wheel Drive. It fits most bulkheads without modifications.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this kit waterproof and corrosion-resistant?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, constructed from marine-grade stainless steel with sealant-compatible flanges, it provides a watertight seal and resists saltwater corrosion effectively.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need special tools for installation?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Basic tools like a drill, hole saw, wrenches, and marine sealant suffice. No welding or advanced machining required.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it be used on thicker bulkheads?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It handles up to 2-inch thick bulkheads standardly. For thicker setups, spacers can be added safely.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my autopilot drive doesn't align perfectly?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The kit includes adjustable components for fine-tuning alignment. Ensure the steering shaft is centered during mock-up.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does it compare to older fitting kits?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Newer designs feature improved threading and materials for better torque retention and longevity over legacy versions.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Will it void my autopilot warranty?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, as an official accessory, it maintains full compatibility and warranty integrity when installed correctly.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eFor attaching Raymarine 4000 mk2 Wheel Drive \u003cbr\u003e\u003cbr\u003eUsed to install Raymarine 4000 mk2 wheel drive. We are committed to making online shopping an enjoyable experience. Our sales office is located in the beautiful beach town of Redondo,...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36406\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e E15017\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193150177\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677589450845,"sku":"36406","price":55.09,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-bulkhead-fitting-kit-1.jpg?v=1673145388"},{"product_id":"48275-raymarine-e-wide-series-video-i-o-cable","title":"Raymarine E-Wide Series Video I\/O Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnhance your vessel's surveillance and monitoring capabilities with the Raymarine E-Wide Series Video I\/O Cable. Designed specifically for boat owners who demand reliable multi-camera setups, this cable streamlines connectivity for E-Series Widescreen Displays, allowing seamless integration of two or more cameras alongside alarm audio inputs. Whether you're navigating busy marinas, monitoring blind spots during docking, or keeping an eye on live bait wells, this accessory transforms your multifunction display into a comprehensive command center.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Multi-Camera Connectivity Matters on the Water\u003c\/h2\u003e\n  \u003cp\u003eSingle-camera systems fall short for larger vessels or complex setups. The E-Wide Series Video I\/O Cable supports expanded video feeds, enabling you to switch between stern, bow, engine room, or salon cameras with ease. It handles composite video signals and audio from alarms, ensuring you never miss critical alerts amid engine noise or waves crashing. Built for the harsh marine environment, it features rugged construction that resists corrosion, UV exposure, and vibration—essentials for offshore adventures or daily charters.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features and Technical Highlights\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-Device Support:\u003c\/strong\u003e Connects 2+ cameras and alarm audio sources directly to your E-Series display, reducing wiring clutter.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHigh-Quality Signal Transmission:\u003c\/strong\u003e Delivers crisp video and clear audio without degradation over distance, ideal for longer cable runs in cabins or cockpits.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e Uses standard Raymarine connectors for quick installation—no custom adapters needed.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable Marine-Grade Build:\u003c\/strong\u003e Shielded cabling protects against electromagnetic interference from radars, VHF radios, and motors.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile I\/O Functionality:\u003c\/strong\u003e Doubles as a hub for video output to secondary displays, perfect for crew stations or helm backups.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect Compatibility for E-Series Widescreen Systems\u003c\/h2\u003e\n  \u003cp\u003eThis cable pairs flawlessly with Raymarine's E-Series Widescreen Multifunction Displays, including popular models like the E90, E120, and E140. It's an essential upgrade for owners integrating Raymarine's AX camera series or third-party marine cameras with composite outputs. Ensure your setup leverages the full power of Raymarine's intuitive menu system for camera switching, picture-in-picture views, and alarm overlays—features that elevate situational awareness without distracting from primary navigation tasks.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips for Seamless Integration\u003c\/h2\u003e\n  \u003cp\u003eGetting started is straightforward for DIY boaters or professional installers. Route the cable through existing conduits or glands to protect it from water ingress. Connect one end to the dedicated Video I\/O port on your E-Series display and the other to your camera daisy-chain or alarm panel. Power cycle the display to auto-detect inputs, then customize camera labels and priorities via the settings menu. Pro tip: Bundle with Raymarine's powered camera hubs for even more inputs, and always test feeds in daylight and low-light conditions to verify performance.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Benefits for Boaters\u003c\/h2\u003e\n  \u003cp\u003eImagine docking in tight slips with a stern camera feed overlaid on your chartplotter, or spotting underwater threats via a forward-facing camera during anchoring. This cable minimizes single points of failure, boosts redundancy, and enhances safety for family cruises, fishing trips, or commercial operations. It's not just wiring—it's peace of mind, backed by Raymarine's reputation for innovation in marine electronics.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What displays is the Raymarine E-Wide Series Video I\/O Cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine E-Series Widescreen Displays, such as the E90, E120, and E140 models, supporting video and audio inputs from multiple cameras.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How many cameras can this cable support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It enables connectivity for two or more cameras, depending on your display's input capacity and daisy-chaining setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it handle alarm audio inputs?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it integrates alarm audio alongside video feeds, routing sounds directly to your display's speakers for immediate alerts.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for harsh marine conditions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it's marine-grade with shielding against corrosion, UV, and interference, built to withstand saltwater exposure and vibrations.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use it with non-Raymarine cameras?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works with any composite video output cameras, making it versatile for mixing Raymarine and third-party gear.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the easiest way to switch between cameras?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Via your E-Series display menu: select video sources, enable overlays, or set up hotkeys for quick toggling during operation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need additional power for the cameras?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Cameras typically require separate power; pair with Raymarine-powered hubs if expanding beyond basic setups.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat displays is the Raymarine E-Wide Series Video I\/O Cable compatible with?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's designed for Raymarine E-Series Widescreen Displays, such as the E90, E120, and E140 models, supporting video and audio inputs from multiple cameras.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow many cameras can this cable support?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt enables connectivity for two or more cameras, depending on your display's input capacity and daisy-chaining setup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it handle alarm audio inputs?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it integrates alarm audio alongside video feeds, routing sounds directly to your display's speakers for immediate alerts.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for harsh marine conditions?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—it's marine-grade with shielding against corrosion, UV, and interference, built to withstand saltwater exposure and vibrations.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use it with non-Raymarine cameras?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt works with any composite video output cameras, making it versatile for mixing Raymarine and third-party gear.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the easiest way to switch between cameras?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eVia your E-Series display menu: select video sources, enable overlays, or set up hotkeys for quick toggling during operation.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need additional power for the cameras?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCameras typically require separate power; pair with Raymarine-powered hubs if expanding beyond basic setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eVideo\/Alarm Audio Cable needed for 2 or more cameras.  For E-Series Widescreen Displays. \u003cbr\u003e\u003cbr\u003e\"RaymarineAlarm audio out and video input\\\/output cable for adding up to 3 additional video input sources as well as an hd compatible vga video output to external lcd monitors and tvs. For use with e-series widescreen multifunction displays.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37164\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e A62158\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 091975005305\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677589680221,"sku":"37164","price":69.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-e-wide-series-1.gif?v=1673145397"},{"product_id":"49426-raymarine-active-gps-sensor-f-micronet-system","title":"Raymarine Active GPS Sensor f\/Micronet System","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnhance your sailing experience with the Raymarine Active GPS Sensor designed specifically for the Micronet system. This compact powerhouse delivers precise position data, course over ground, and speed over ground directly to your wireless displays, freeing you from bulky traditional setups. Sailors appreciate its seamless integration, turning complex navigation into effortless precision on the water.\u003c\/p\u003e\n  \n  \u003ch2\u003eWhy Choose This GPS Sensor for Your Micronet Setup?\u003c\/h2\u003e\n  \u003cp\u003eImagine gliding through races or long cruises with reliable GPS info at your fingertips—no more guessing your exact position or speed relative to the water. This sensor stands out by combining high sensitivity with a tiny footprint, making it a favorite among competitive sailors and casual boaters alike. It pulls in signals from multiple satellites simultaneously, ensuring accuracy even in challenging marine environments like crowded harbors or open ocean stretches.\u003c\/p\u003e\n  \n  \u003cp\u003eUnlike generic GPS units, it's tailored for wireless Micronet networks, broadcasting data wirelessly after a simple wired connection to the interface. This means cleaner decks, fewer cables snaking around, and more focus on what matters: the sail.\u003c\/p\u003e\n  \n  \u003ch2\u003eStandout Features That Deliver Real-World Performance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMulti-Channel Precision:\u003c\/strong\u003e Tracks up to 16 satellites in parallel for rock-solid fixes, even under tree cover or near tall masts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Mounting:\u003c\/strong\u003e Secure it indoors for protection or outdoors for optimal sky view, with a standard pole adapter that fits decks, masts, and stanchions effortlessly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFeatherlight Design:\u003c\/strong\u003e At just 108 grams (without cable), it won't add noticeable weight or windage to your rig.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProven Accuracy:\u003c\/strong\u003e Delivers 3.3m RMS positioning under typical conditions, giving you confidence in tight maneuvers or waypoint navigation.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWireless Freedom:\u003c\/strong\u003e Pairs directly with the T122 Wireless NMEA Interface, pushing Position, Course, and Speed Over Ground to all your Micronet displays.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSimple Setup:\u003c\/strong\u003e No complex wiring—just mount, connect, and go, with a small form factor that slips into tight spaces.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch2\u003eSeamless Integration and Everyday Benefits\u003c\/h2\u003e\n  \u003cp\u003eFor Micronet users, this sensor unlocks the full potential of your mn100 system. It feeds essential data like true course over ground and speed through the water-relative metrics, helping you optimize sail trim, plot perfect tacks, and avoid no-go zones. Racers use it to calculate VMG (velocity made good) on the fly, while cruisers rely on it for safe passage planning.\u003c\/p\u003e\n  \n  \u003cp\u003eIts active antenna tech amplifies weak signals, outperforming passive models in real boating scenarios. Mount it high on the mast for unbeatable reception, or tuck it below deck during stormy passages. The result? Consistent data that syncs across your entire wireless network, keeping everyone on board informed without shouting across the cockpit.\u003c\/p\u003e\n  \n  \u003ch2\u003eEffortless Installation Tips from Seasoned Sailors\u003c\/h2\u003e\n  \u003cp\u003eGetting it up and running takes minutes. Start by selecting your spot—top of the mast for max performance or a protected console spot. Use the included 22mm diameter x 15mm high bolt mount or the 1\"x14 thread pole adapter for universal fit. Run the cable to your T122 interface, power it up, and watch your displays light up with fresh GPS intel.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: Seal connections with marine-grade silicone for watertight reliability. In saltwater environments, regular freshwater rinses keep it performing like new. No special tools needed, making it DIY-friendly for weekend warriors.\u003c\/p\u003e\n  \n  \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003cthead\u003e\n      \u003ctr\u003e\n        \u003cth\u003eSpecification\u003c\/th\u003e\n        \u003cth\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eChannels\u003c\/td\u003e\n        \u003ctd\u003e16 parallel\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eAccuracy\u003c\/td\u003e\n        \u003ctd\u003e3.3m RMS (DOP \u0026lt; 3)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eWeight\u003c\/td\u003e\n        \u003ctd\u003e108g (without cable)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eMounting\u003c\/td\u003e\n        \u003ctd\u003e22mm(D) x 15mm(H) bolt; 1\"x14 pole adapter\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003eCompatibility\u003c\/td\u003e\n        \u003ctd\u003eT122 Wireless NMEA Interface for mn100 Micronet\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n  \n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What data does the Raymarine Active GPS Sensor provide to my Micronet system?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It supplies Position, Course Over Ground (COG), and Speed Over Ground (SOG) wirelessly to your mn100 displays via the T122 interface.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can I mount this GPS sensor inside the boat?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it's designed for both indoor and outdoor mounting, offering flexibility based on your boat's layout and signal needs.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How accurate is the positioning from this sensor?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It achieves 3.3m RMS accuracy under standard conditions (DOP \u0026lt; 3), reliable for most navigation tasks.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it require any special wiring beyond the T122 interface?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No, it wires directly to the T122 Wireless NMEA Interface for straightforward setup.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is this sensor lightweight enough for masthead installation?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely, at only 108 grams without cable, it minimizes top-weight and windage on your rig.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What mounting options come included?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It includes a 22mm(D) x 15mm(H) bolt mount and a standard 1\\\"x14 pole adapter for decks, masts, and stanchions.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How many satellites can it track?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It supports 16 parallel channels for robust satellite tracking and quick fixes.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n  \n  \u003cdiv class=\"faq-list\"\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat data does the Raymarine Active GPS Sensor provide to my Micronet system?\u003c\/summary\u003e\n      \u003cp\u003eIt supplies Position, Course Over Ground (COG), and Speed Over Ground (SOG) wirelessly to your mn100 displays via the T122 interface.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eCan I mount this GPS sensor inside the boat?\u003c\/summary\u003e\n      \u003cp\u003eYes, it's designed for both indoor and outdoor mounting, offering flexibility based on your boat's layout and signal needs.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eHow accurate is the positioning from this sensor?\u003c\/summary\u003e\n      \u003cp\u003eIt achieves 3.3m RMS accuracy under standard conditions (DOP \u0026lt; 3), reliable for most navigation tasks.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eDoes it require any special wiring beyond the T122 interface?\u003c\/summary\u003e\n      \u003cp\u003eNo, it wires directly to the T122 Wireless NMEA Interface for straightforward setup.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eIs this sensor lightweight enough for masthead installation?\u003c\/summary\u003e\n      \u003cp\u003eAbsolutely, at only 108 grams without cable, it minimizes top-weight and windage on your rig.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat mounting options come included?\u003c\/summary\u003e\n      \u003cp\u003eIt includes a 22mm(D) x 15mm(H) bolt mount and a standard 1\\\"x14 pole adapter for decks, masts, and stanchions.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eHow many satellites can it track?\u003c\/summary\u003e\n      \u003cp\u003eIt supports 16 parallel channels for robust satellite tracking and quick fixes.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eEquip your Micronet system with this reliable GPS sensor and elevate your on-water decision-making. It's the smart choice for sailors who demand precision without the hassle.\u003c\/p\u003e\n\u003c\/div\u003e\u003cul\u003e\n\u003cli\u003e Active GPS Antenna for use with the mn100 Micronet system. \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Easily adds Position, Course and Speed Over the Ground to your mn100 Micronet system.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Wires directly to the T122 Wirless NMEA Interface\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Can be mounted inside or outside the boat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e 16 parallel channels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Weighs only 108 grams without cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Accurate to 3.3m RMS*(DOP\u0026lt;3)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Mounting: 22mm(D)x 15mm(H)Bolt\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Comes with standard (1\"x14) pole mount adapter suitable for use with deck, mast and stantions\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Small form factor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Simple installation \u003cbr\u003e\u003cbr\u003e\"Raymarine \\u00b7 Wi-Fi \\u00b7 GPS \\u00b7 Outdoor \\u00b7 Marine  Wires directly to the T122 Wirless NMEA Interface Can be mounted inside or outside the boat 16 parallel channels Weighs only 108 grams without cable Accurate to 3.3m RMS*(DOP.See more details at MyGreenOutdoors \\u00bb\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-38315\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e T908\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 5037707009086\u003cbr\u003e\n            \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677590532189,"sku":"38315","price":414.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-active-gps-sensor-1.jpg?v=1673145452"},{"product_id":"49429-raymarine-solar-panel-f-hull-transmitter","title":"Raymarine Solar Panel f\/Hull Transmitter","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eKeep your Raymarine Micronet wireless network instruments powered up and ready for any adventure on the water with the compact T138 solar panel. Designed specifically for hull-mounted transmitters like the T121 or T122 Wireless NMEA Interface, this solar solution delivers reliable, maintenance-free power straight from the sun. No more worrying about dead batteries during long offshore trips or extended anchoring—simply mount it on your hull and let nature do the work.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose the Raymarine T138 Solar Panel for Your Boat?\u003c\/h2\u003e\n  \u003cp\u003eBoat owners know the frustration of unreliable power sources disrupting critical data from wind gauges, speed logs, or depth sounders. The T138 steps in as a game-changer, providing a steady 9-volt trickle charge to keep your Micronet system humming. Its small 4-1\/4 by 4-1\/4 inch footprint means it blends seamlessly into your hull design without adding drag or clutter. Paired with a 10-foot cable, installation is straightforward, even in tight spaces below the waterline.\u003c\/p\u003e\n  \n  \u003cp\u003eEngineered by Raymarine, a name synonymous with marine toughness, this panel withstands pounding waves, UV exposure, and salt spray. It's not just about power—it's about peace of mind, ensuring your wireless instruments stay connected and accurate when you need them most, whether racing competitively or cruising leisurely.\u003c\/p\u003e\n\n  \u003ch2\u003eStandout Features That Deliver Real-World Performance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact and Low-Profile:\u003c\/strong\u003e Minimal size reduces hydrodynamic impact and fits on most hull shapes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e9-Volt Output:\u003c\/strong\u003e Perfect match for Micronet hull transmitters, optimizing charge efficiency.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended 10-Foot Cable:\u003c\/strong\u003e Offers flexible routing options for clean, hidden installations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Marine Build:\u003c\/strong\u003e Proven in extreme conditions with corrosion-resistant materials.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEasy DIY Setup:\u003c\/strong\u003e No special tools needed—adhere, connect, and sail.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eBoost Your Boating Experience: Key Benefits\u003c\/h2\u003e\n  \u003cp\u003eIntegrating the T138 solar panel transforms how you manage onboard electronics. It eliminates the need to run power cables from your main battery bank, reducing wiring complexity and potential failure points. Ideal for sailboats, power yachts, or dinghies where space and simplicity matter, it supports wireless data transmission for speed, depth, wind, and GPS—keeping your cockpit displays live without interruption.\u003c\/p\u003e\n  \n  \u003cp\u003eUsers rave about its longevity: in sunny climates, it fully charges the transmitter's internal battery daily, even on overcast days providing enough to maintain operations. Pair it with Raymarine's ecosystem for a fully wireless setup that's as reliable as it is innovative.\u003c\/p\u003e\n\n  \u003ch2\u003eSimple Installation Tips for Optimal Results\u003c\/h2\u003e\n  \u003cp\u003eMount the panel on a southward-facing (in the northern hemisphere) section of the hull above the waterline for maximum sun exposure. Clean the surface thoroughly, apply marine-grade adhesive, and secure the cable with zip ties or conduit to avoid chafe. Connect directly to your T121 or T122—no regulators needed, as it's optimized for the system's NiMH battery. Test in shallow water before heading out to confirm charging.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: In high-vibration areas, add a dab of silicone sealant around edges for extra hold. Regular rinses with fresh water keep it performing like new season after season.\u003c\/p\u003e\n\n  \u003ch2\u003ePerfect Compatibility with Raymarine Micronet\u003c\/h2\u003e\n  \u003cp\u003eExclusively tailored for Raymarine's Micronet Wireless Network Instruments, the T138 powers the T121 Hull Transmitter (for speed\/depth) and T122 Wireless NMEA Interface (for bridging NMEA 0183 data). It integrates flawlessly with tridata displays, wind systems, and autopilot interfaces, creating a cable-free network across your vessel.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices is the Raymarine T138 solar panel compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for the Raymarine T121 Hull Transmitter and T122 Wireless NMEA Interface within the Micronet wireless network.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What are the dimensions of the T138 solar panel?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The panel measures 4-1\/4 inches in length and 4-1\/4 inches in width, making it compact for hull mounting.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the T138 come with a cable, and how long is it?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it includes a 10-foot cable for flexible installation routing.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What voltage does the Raymarine T138 solar panel output?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It provides a 9-volt output, ideal for trickle-charging Micronet transmitter batteries.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the T138 solar panel easy to install on a boat hull?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—its small footprint and included cable allow for quick, tool-free mounting with marine adhesive.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How durable is the T138 in marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Built to Raymarine's rugged standards, it resists UV, salt, and impacts for long-term reliability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can the T138 power multiple devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's optimized for a single hull transmitter; for broader systems, consider additional panels.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat devices is the Raymarine T138 solar panel compatible with?\u003c\/h3\u003e\n      \u003cp\u003eIt's designed for the Raymarine T121 Hull Transmitter and T122 Wireless NMEA Interface within the Micronet wireless network.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat are the dimensions of the T138 solar panel?\u003c\/h3\u003e\n      \u003cp\u003eThe panel measures 4-1\/4 inches in length and 4-1\/4 inches in width, making it compact for hull mounting.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes the T138 come with a cable, and how long is it?\u003c\/h3\u003e\n      \u003cp\u003eYes, it includes a 10-foot cable for flexible installation routing.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat voltage does the Raymarine T138 solar panel output?\u003c\/h3\u003e\n      \u003cp\u003eIt provides a 9-volt output, ideal for trickle-charging Micronet transmitter batteries.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the T138 solar panel easy to install on a boat hull?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—its small footprint and included cable allow for quick, tool-free mounting with marine adhesive.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow durable is the T138 in marine environments?\u003c\/h3\u003e\n      \u003cp\u003eBuilt to Raymarine's rugged standards, it resists UV, salt, and impacts for long-term reliability.\u003c\/p\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan the T138 power multiple devices?\u003c\/h3\u003e\n      \u003cp\u003eIt's optimized for a single hull transmitter; for broader systems, consider additional panels.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eEquip your vessel with the T138 and experience uninterrupted wireless performance that matches Raymarine's legacy of excellence.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eFor more than 80 years, we‘ve been global leaders in high performance marine electronics for the recreational boating and light commercial marine markets. We continue to innovate and provide full electronic systems to boaters around the world. Our products are engineered for the tough marine environment and renowned for ease-of-use, rugged design and reliability. Our full range features chartplotters, fishfinders, radars, marine instruments, marine cameras, AIS units and VHF radios.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eRaymarine T138 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eRaymarine Micronet Wireless Network Instruments\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eVoltage: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDimensions: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e4-1\/4 Inch Length X 4-1\/4 Inch Width\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWith 10 Feet Cable\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eRaymarine T138 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eBuilt To Last Longer Life\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eRugged Design And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eRaymarine T138 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/RYM\/Warranty\/Raymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRaymarine-Global-Limited-Warranty-01-Jul-17-rev1-0.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSolar Panel for Hull Transmitter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eSolar panel suitable for supplying power to a Micronet T121 Hull Transmitter or T122 Wireless NMEA Interface.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eSmall footprint\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEasy installation splays\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe solar panels for hull transmitters are suitable for solar panels that power Micronet T121 hull transmitters or T122 wireless NMEA interfaces. Features: Small footprint and easy...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-38318\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e T138\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193702819\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677590663261,"sku":"38318","price":127.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-solar-panel-f-1.jpg?v=1673145458"},{"product_id":"51955-raymarine-single-mast-bracket-f-micronet-race","title":"Raymarine Single Mast Bracket f\/Micronet \u0026 Race Master","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eSecure your Raymarine Micronet displays or Race Master compass at the perfect vantage point with the T137 Single Mast Bracket. Designed specifically for sailors who demand precision and reliability on the water, this slug-style bracket slides effortlessly into standard mast tracks, keeping your instruments stable even in the roughest conditions. Whether you're fine-tuning tactics during a high-stakes regatta or monitoring wind shifts on a coastal cruise, this mount ensures your data stays front and center without compromising your boat's clean lines.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for the Demands of Sailing\u003c\/h2\u003e\n  \u003cp\u003eCrafted from high-grade aluminum, the T137 bracket combines featherlight weight with unyielding strength—essential for keeping your rig responsive while handling the relentless pounding of waves and wind. The black powder-coated finish isn't just for looks; it shrugs off salt spray, UV rays, and freshwater rinses, maintaining its sleek appearance season after season. No more worrying about rust creeping in or mounts loosening mid-race—this corrosion-resistant powerhouse is engineered to endure the marine environment like a true sailor's ally.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Compatibility Across Raymarine Gear\u003c\/h2\u003e\n  \u003cp\u003eThis versatile bracket supports the full spectrum of Micronet displays, including Digital, Dual, Analog, and Master models, plus the Race Master tactical compass. It's a one-size-fits-most solution for single mast setups, allowing you to position one instrument optimally for quick glances from the helm or rail. Pair it with your wireless Micronet system for cable-free operation, or integrate it into Race Master setups for real-time heading data that sharpens your starts and gybes.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Advantages Over Generic Mounts\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrecision Fit:\u003c\/strong\u003e Slug design hugs mast tracks securely, eliminating wobble and vibration that can skew readings.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLow Profile:\u003c\/strong\u003e Minimizes windage and drag, preserving your boat's performance edge.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEasy Upgrades:\u003c\/strong\u003e Swap instruments without tools or new hardware—future-proof your setup.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eProven in Competition:\u003c\/strong\u003e Trusted by club racers and offshore pros for its no-fail grip in 30+ knot puffs.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eQuick Installation Tips from the Pros\u003c\/h2\u003e\n  \u003cp\u003eMounting the T137 is straightforward, even solo on a breezy day. Slide the slug into your mast track at eye level (typically 1-2 meters above deck), tighten the thumb screws for a rock-solid hold, and attach your Micronet or Race Master via the standard bracket interface. Pro tip: Align it slightly forward to shield from spray while keeping it readable from both sides of the boat. No drilling, no permanent mods—just plug and sail. Regular checks on the powder coat during haul-outs keep it performing like new.\u003c\/p\u003e\n\n  \u003ch2\u003eElevate Your On-Water Decision-Making\u003c\/h2\u003e\n  \u003cp\u003eImagine nailing that perfect layline because your Race Master stayed locked in place, or adjusting sails instantly thanks to a vibration-free Micronet display. The T137 isn't just a bracket; it's the unsung hero that turns raw data into winning moves. Sailors rave about how it simplifies rigging while boosting confidence in choppy seas—because when every second counts, your instruments need to be as tough as you are.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What Raymarine instruments is the T137 Single Mast Bracket compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The T137 bracket works with all Micronet displays (Digital, Dual, Analog, and Master ranges) and the Race Master compass, making it ideal for single-instrument mast mounts on sailboats.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does the slug design benefit mast mounting?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The slug slides directly into standard mast tracks for a secure, tool-free fit that resists vibration and movement, ensuring stable instrument readings even in heavy weather.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the T137 bracket resistant to corrosion in saltwater environments?\",\n          \"@acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its black powder-coated aluminum construction provides excellent protection against salt corrosion, UV exposure, and abrasion, perfect for long-term marine use.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this bracket for racing sailboats?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it's lightweight and low-profile to minimize drag, with a strong hold trusted in competitive racing for Race Master and Micronet setups.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How easy is it to install the T137 mast bracket?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Installation takes minutes: Insert the slug into the mast track, secure with thumb screws, and clip on your instrument. No special tools or modifications required.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the weight advantage of this bracket?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Ultra-lightweight at under 200g, it adds negligible topweight to your rig, helping maintain balance and speed without sacrificing strength.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the powder coating affect the bracket's performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No—the durable black powder coat enhances durability against environmental wear while keeping the bracket sleek and non-reflective on deck.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat Raymarine instruments is the T137 Single Mast Bracket compatible with?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe T137 bracket works with all Micronet displays (Digital, Dual, Analog, and Master ranges) and the Race Master compass, making it ideal for single-instrument mast mounts on sailboats.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the slug design benefit mast mounting?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe slug slides directly into standard mast tracks for a secure, tool-free fit that resists vibration and movement, ensuring stable instrument readings even in heavy weather.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the T137 bracket resistant to corrosion in saltwater environments?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, its black powder-coated aluminum construction provides excellent protection against salt corrosion, UV exposure, and abrasion, perfect for long-term marine use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this bracket for racing sailboats?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—it's lightweight and low-profile to minimize drag, with a strong hold trusted in competitive racing for Race Master and Micronet setups.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow easy is it to install the T137 mast bracket?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eInstallation takes minutes: Insert the slug into the mast track, secure with thumb screws, and clip on your instrument. No special tools or modifications required.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the weight advantage of this bracket?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eUltra-lightweight at under 200g, it adds negligible topweight to your rig, helping maintain balance and speed without sacrificing strength.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes the powder coating affect the bracket's performance?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo—the durable black powder coat enhances durability against environmental wear while keeping the bracket sleek and non-reflective on deck.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eSingle Mast Bracket f\/Micronet \u0026amp; Race Master\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eT137 Slug Mast Bracket 1 up (Digital, Dual, Analog \u0026amp; Master Range).  Single mast bracket for Micronet displays and Race Master.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eStrong and lightweight\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlack powder coated\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCorrosion free\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eSingle mast holder f\/Micronet and Race Master T137 bullet head holder 1 upward (digital, double, analog and main range). Single mast stand for Micronet display and Race Master. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40844\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e T137\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 5037707001370\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591220317,"sku":"CWR-40844","price":129.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-single-mast-bracket-1.jpg?v=1673145495"},{"product_id":"51956-raymarine-small-cradle-f-micro-compass-mid","title":"Raymarine Small Cradle f\/Micro Compass - Mid Grey","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"features-benefits\"\u003e\n    \u003ch2\u003eEnhance Your On-Water Navigation with Precision Mounting\u003c\/h2\u003e\n    \u003cp\u003ePicture this: you're out on the water in your kayak or small craft, wind picking up, and you need a reliable heading at a glance. The Raymarine Small Cradle in mid grey steps in as the perfect partner for your Micro Compass, offering a secure, low-profile mount that keeps your navigation tool steady and accessible. Crafted from durable marine-grade materials, this cradle blends seamlessly with modern deck aesthetics while standing up to saltwater splashes and UV exposure.\u003c\/p\u003e\n    \n    \u003ch3\u003eKey Features That Stand Out\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact Design:\u003c\/strong\u003e Tailored specifically for the Micro Compass, it minimizes bulk on tight spaces like kayak decks or tiller rails.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMid Grey Finish:\u003c\/strong\u003e A sleek, non-reflective color that reduces glare and matches neutral boat tones for a professional look.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eQuick-Release Mechanism:\u003c\/strong\u003e Snap your compass in and out effortlessly for storage or transport without tools.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Engineered to withstand vibrations, impacts, and harsh marine environments season after season.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Mounting Options:\u003c\/strong\u003e Adhesive or screw-compatible base adapts to flat surfaces, curved rails, or custom setups.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"user-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters and Anglers Swear by This Cradle\u003c\/h2\u003e\n    \u003cp\u003eIt's not just a holder—it's your gateway to stress-free navigation. Kayak anglers report catching more fish by maintaining a consistent course through currents, while sailors use it to monitor headings during tacks without fumbling. The cradle's stability prevents compass wobble, ensuring readings accurate to within a degree even in choppy conditions. Plus, its lightweight build won't throw off your boat's balance, making it ideal for solo paddlers or lightweight dinghies.\u003c\/p\u003e\n    \n    \u003ch3\u003eReal-World Applications\u003c\/h3\u003e\n    \u003cfigure\u003e\n      \u003cimg src=\"placeholder-kayak-mount.jpg\" alt=\"Raymarine Small Cradle mounted on kayak deck holding Micro Compass securely during paddle\" width=\"600\" height=\"400\"\u003e\n      \u003cfigcaption\u003eKayak setup: Cradle keeps compass visible and protected amid gear.\u003c\/figcaption\u003e\n    \u003c\/figure\u003e\n    \n    \u003cp\u003eFrom coastal cruising to competitive racing, this cradle elevates your setup. Pair it with the Micro Compass for a heads-up display that rivals larger systems, all without the clutter.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eSimple Setup for Immediate Use\u003c\/h2\u003e\n    \u003cp\u003eGetting your cradle ready takes minutes. Clean the mounting surface thoroughly, apply the included marine adhesive for a no-drill install, or use screws for a permanent hold. Align the compass slot precisely, snap in your Micro Compass, and calibrate as per the compass manual. Pro tip: Test in calm water first to fine-tune positioning for optimal viewing angles—typically at eye level for standing or seated operation.\u003c\/p\u003e\n    \n    \u003col\u003e\n      \u003cli\u003eChoose your spot: Forward deck, console edge, or rail.\u003c\/li\u003e\n      \u003cli\u003ePrep surface: Wipe with isopropyl alcohol.\u003c\/li\u003e\n      \u003cli\u003eAttach base: Press firmly for 60 seconds.\u003c\/li\u003e\n      \u003cli\u003eSecure compass: Hear the satisfying click.\u003c\/li\u003e\n      \u003cli\u003eVerify: Power on and check for level readings.\u003c\/li\u003e\n    \u003c\/ol\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eKeep It Performing Like New\u003c\/h2\u003e\n    \u003cp\u003eLongevity comes from smart care. Rinse with fresh water after every saltwater outing to fend off corrosion. Avoid high-pressure washes that could loosen bonds. In off-season storage, detach the compass and store the cradle in a dry, shaded spot. Inspect seals annually—if any wear shows, a quick silicone refresh restores waterproofing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs the Raymarine Small Cradle compatible with all Micro Compass models?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's designed specifically for Raymarine Micro Compass units, ensuring a perfect fit across standard models for secure, rattle-free mounting.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this cradle on a kayak?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—its low profile and adhesive base make it ideal for kayaks, SUPs, and other narrow vessels where space is premium.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes the mid grey color fade in sunlight?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, the UV-resistant finish holds its matte mid grey tone through extended exposure, maintaining that clean look year-round.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I remove the compass from the cradle?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSimply press the release tab on the side—a gentle lift pops it out safely, no force required.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it waterproof?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eFully submersible when properly installed, it protects against splashes, rain, and brief immersion common in marine use.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat surfaces can I mount it on?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSmooth fiberglass, aluminum rails, plastic consoles, or gelcoat—adhesive works on most non-porous marine surfaces.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eTA065 Small Cradle for Micro Compass (mid grey)\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eSmall Cradle for Micro Compass \u003cbr\u003e\u003cbr\u003eThe high-performance sonar module Raymarine CP370 with ClearPulse signal processing function can not only be easily integrated into the Raymarine network with today's MFD...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40845\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e TA065\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 452359024396\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591285853,"sku":"CWR-40845","price":30.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-small-cradle-f-1.jpg?v=1673145498"},{"product_id":"51957-raymarine-wind-vane-replacement-kit-w-vane-bearing","title":"Raymarine Wind Vane Replacement Kit w\/Vane, Bearing \u0026 Stud kit","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eKeep your sailboat's wind readings precise and reliable with the Raymarine TA100 wind vane replacement kit. Designed for marine enthusiasts who demand accuracy in challenging conditions, this kit revives your wind instrument's performance without the hassle of full system overhauls. Whether you're racing competitively or cruising long distances, a fresh vane ensures you capture every shift in wind direction, helping you trim sails optimally and navigate smarter.\u003c\/p\u003e\n\n  \u003ch2\u003eEssential Components for Seamless Replacement\u003c\/h2\u003e\n  \u003cp\u003eThe TA100 kit arrives ready to restore your setup, packing the core elements needed for a straightforward swap. You'll get the lightweight, aerodynamic wind vane crafted from durable materials that withstand saltwater corrosion and high winds. Paired with precision bearings for smooth rotation and a sturdy mounting stud, everything aligns perfectly to eliminate play or hesitation in readings. No more erratic displays distracting you from the helm— just plug-and-play reliability.\u003c\/p\u003e\n\n  \u003ch2\u003ePerfect Fit for Raymarine Wind Systems\u003c\/h2\u003e\n  \u003cp\u003eEngineered specifically for Raymarine's popular wind displays, including legacy ST series and modern i-series models, the TA100 integrates flawlessly. It's a direct replacement that maintains the original sensitivity, ensuring your close-hauled angles and apparent wind speeds stay spot-on. Sailors upgrading from older anemometers appreciate how this kit breathes new life into time-tested instruments, preserving your investment in proven marine tech.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Your Boat Needs This Upgrade\u003c\/h2\u003e\n  \u003cp\u003eOver time, exposure to UV rays, salt spray, and constant motion wears down wind vanes, leading to sluggish response or total failure. A compromised vane means misjudged tacks, slower boatspeeds, and frustration during races or foul weather. The TA100 counters this with robust construction that resists fatigue, delivering feather-light movement for readings as crisp as day one. Boaters report sharper tactical decisions and fewer surprises, turning potential downtime into endless horizons.\u003c\/p\u003e\n\n  \u003ch2\u003eSimple Installation for On-the-Water Confidence\u003c\/h2\u003e\n  \u003cp\u003eSwapping in the TA100 takes minimal tools and even less time—ideal for weekend warriors or pros prepping for regattas. Start by powering down your system and securing the mast safely. Remove the old vane by loosening the stud, clean the mounting area, then thread in the new stud with its pre-applied sealant for a watertight seal. Slide on the bearings, attach the vane, and calibrate via your display. Test in light breezes to confirm smooth 360-degree sweeps. Most skippers complete it in under 30 minutes, often at the dock or anchored bay.\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003eMatch torque specs to avoid over-tightening.\u003c\/li\u003e\n    \u003cli\u003eLubricate bearings sparingly with marine grease.\u003c\/li\u003e\n    \u003cli\u003eRecalibrate after install for peak accuracy.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eLong-Term Maintenance for Peak Performance\u003c\/h2\u003e\n  \u003cp\u003eTo maximize lifespan, inspect your vane seasonally for cracks, looseness, or buildup. Rinse with fresh water after every sail to fend off salt crystals, and avoid harsh chemicals that pit the finish. In high-use scenarios like offshore passages, check bearings for grit. Proactive care like this keeps your Raymarine system humming, sparing you mid-voyage headaches and ensuring consistent data for autopilot integration or tactical apps.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Impact on Your Sailing\u003c\/h2\u003e\n  \u003cp\u003eImagine threading the needle through a crowded starting line with unwavering wind data, or holding a perfect broad reach in 25 knots without guesswork. The TA100 delivers that edge, blending Raymarine's heritage engineering with practical upgrades. It's not just a part—it's the difference between good sails and great ones, trusted by circumnavigators and club racers alike for its no-fuss durability.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is included in the Raymarine TA100 wind vane replacement kit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The kit includes the wind vane, precision bearings, and mounting stud, providing all necessary parts for a complete replacement.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which Raymarine wind instruments is the TA100 compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for Raymarine ST series, ST60+, i50, and i60 wind systems, serving as a direct OEM replacement.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my wind vane needs replacing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Look for sluggish rotation, inaccurate direction readings, wobbling, or visible wear like cracks or corrosion on the vane.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I install the TA100 kit myself without professional help?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's user-friendly with basic tools; most installations take under 30 minutes at the dock.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does the TA100 improve wind reading accuracy?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it restores original sensitivity with smooth bearings, ensuring precise direction and speed data.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How should I maintain the TA100 after installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Rinse with fresh water after use, inspect seasonally, and lubricate bearings lightly to prevent salt buildup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the TA100 suitable for harsh marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, its corrosion-resistant materials handle UV, salt spray, and high winds reliably.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat is included in the Raymarine TA100 wind vane replacement kit?\u003c\/h3\u003e\n      \u003cp\u003eThe kit includes the wind vane, precision bearings, and mounting stud, providing all necessary parts for a complete replacement.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhich Raymarine wind instruments is the TA100 compatible with?\u003c\/h3\u003e\n      \u003cp\u003eIt's designed for Raymarine ST series, ST60+, i50, and i60 wind systems, serving as a direct OEM replacement.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do I know if my wind vane needs replacing?\u003c\/h3\u003e\n      \u003cp\u003eLook for sluggish rotation, inaccurate direction readings, wobbling, or visible wear like cracks or corrosion on the vane.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan I install the TA100 kit myself without professional help?\u003c\/h3\u003e\n      \u003cp\u003eYes, it's user-friendly with basic tools; most installations take under 30 minutes at the dock.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes the TA100 improve wind reading accuracy?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—it restores original sensitivity with smooth bearings, ensuring precise direction and speed data.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow should I maintain the TA100 after installation?\u003c\/h3\u003e\n      \u003cp\u003eRinse with fresh water after use, inspect seasonally, and lubricate bearings lightly to prevent salt buildup.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the TA100 suitable for harsh marine environments?\u003c\/h3\u003e\n      \u003cp\u003eYes, its corrosion-resistant materials handle UV, salt spray, and high winds reliably.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003eTA100 Wind Vane, bearing \u0026amp; stud kit \u003cbr\u003e\u003cbr\u003eThe single-engine horizontal battery distribution cluster 716-H-140A-DVSR with two battery packs is an ideal replacement for the battery selector switch. Just remove the selector...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40846\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e TA100\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 5037707301005\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591351389,"sku":"40846","price":77.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-wind-vane-replacement-1.jpg?v=1673145501"},{"product_id":"51959-raymarine-replacement-wind-cup-set-f-anemometer","title":"Raymarine Replacement Wind Cup Set f\/Anemometer","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003cp\u003eKeep your vessel's wind readings precise and reliable with this essential replacement set designed specifically for marine anemometers. Over time, exposure to harsh saltwater environments, high winds, and UV rays can wear down wind cups, leading to inaccurate speed measurements that affect everything from sail trim to safe navigation. This replacement kit restores factory-level performance, ensuring you capture true wind data whether you're racing offshore or cruising coastal waters.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted from durable, weather-resistant materials, these cups spin smoothly to deliver consistent readings even in gusty conditions. Sailors and powerboaters alike trust this upgrade to maintain the integrity of their onboard weather station without the need for full instrument replacement.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecision Engineering:\u003c\/strong\u003e Three-cup design optimized for low-friction rotation, providing accurate wind speed from light breezes to gale-force winds.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCorrosion-Resistant Build:\u003c\/strong\u003e UV-stabilized polycarbonate construction withstands prolonged sun exposure and salty air, extending service life on deck.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Snap-On Fit:\u003c\/strong\u003e Direct replacement that installs in minutes, minimizing downtime during maintenance stops.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBalanced Performance:\u003c\/strong\u003e Ensures minimal vibration and noise, protecting sensitive anemometer bearings for long-term reliability.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEnhanced Safety:\u003c\/strong\u003e Reliable data supports better decision-making, from reefing sails early to plotting optimal routes around weather fronts.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Seamless Upgrades\u003c\/h2\u003e\n    \u003cp\u003eThis set integrates flawlessly with popular marine wind systems, making it a go-to choice for refits. It pairs with legacy and modern setups, supporting displays that rely on precise anemometer input for apparent and true wind calculations. Ideal for boats equipped with compact wind transducers mounted on mastheads or at deck level.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSimple Installation Steps\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down and secure your anemometer to prevent accidental spins.\u003c\/li\u003e\n      \u003cli\u003eGently remove the old cups by twisting or releasing the retaining clip—inspect the hub for debris and clean if needed.\u003c\/li\u003e\n      \u003cli\u003eAlign the new cups with the drive shaft markings for proper phasing.\u003c\/li\u003e\n      \u003cli\u003eSnap or press-fit securely, then test-rotate by hand to confirm smooth, even motion.\u003c\/li\u003e\n      \u003cli\u003eRe-energize the system and calibrate via your display unit for peak accuracy.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Perform this swap during a calm anchorage or haul-out to avoid wrestling with tools aloft in choppy seas.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintenance Tips for Lasting Performance\u003c\/h2\u003e\n    \u003cp\u003eTo maximize longevity, rinse cups regularly with fresh water after exposure to spray. Inspect annually for cracks or imbalance, especially before long passages. A quick freshwater spin test can reveal early wear—replace proactively to sidestep data glitches mid-voyage. Pair with anemometer lubricant sparingly if bearings feel sticky, but avoid over-application to prevent saltwater attraction.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Mariners Rely on This Replacement\u003c\/h2\u003e\n    \u003cp\u003eIn the demanding world of boating, skimping on wind gear isn't an option. Worn cups skew not just speed but direction data too, throwing off autopilot tacks and wind-shift predictions. This genuine-spec set brings back that crisp responsiveness, letting you focus on the horizon rather than troubleshooting. Whether upgrading a classic setup or refreshing after storm season, it's the smart, cost-effective path to trusted wind intelligence.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How often should I replace wind cups on my anemometer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Most users replace them every 2-5 years, depending on exposure to sun, salt, and high winds. Signs like erratic readings, wobbling, or faded color signal time for new ones.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this fit my older Raymarine wind instrument?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's engineered as a direct match for compatible anemometer hubs, spanning multiple generations of marine wind systems.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does installation require special tools?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, just basic pliers or your hands suffice. It's a tool-minimal swap to get you back online quickly.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can these cups handle tropical storm conditions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—they're built tough for sustained high winds, with materials tested in real-world offshore abuse.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my anemometer needs new cups?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Look for inconsistent speed logs, failure to register below 5 knots, physical cracks, or visible wear. A manual spin test should feel uniform and free.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Are these cups balanced for quiet operation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, precision molding ensures low vibration, reducing noise and wear on the anemometer assembly.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I clean the old cups before replacing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Freshwater rinse and soft brushing help, but deep pitting or imbalance means it's replacement time, not repair.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eTA101 Wind Anemometer Cup Set \u003cbr\u003e\u003cbr\u003eVertical battery switch pack with DVSR-1 engine\/2 batteries-BEP dual battery switch with digital VSR and emergency parallel function-dual battery charging pack-suitable for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40848\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e TA101\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 5037707301012\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591416925,"sku":"40848","price":30.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-replacement-wind-cup-1.jpg?v=1673145504"},{"product_id":"51960-raymarine-2-up-replacement-battery-pack-seal","title":"Raymarine 2-up Replacement Battery Pack \u0026 Seal Kit","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eKeep your Raymarine wireless remote controls powered up and protected with the TA118 2-up replacement battery pack and seal kit. Designed specifically for marine environments, this kit ensures your autopilot or navigation remotes stay reliable during long outings on the water. Whether you're adjusting course from the helm or fine-tuning from afar, fresh batteries and a tight seal mean no interruptions from power loss or water intrusion.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Your Raymarine Remotes Need This Kit\u003c\/h2\u003e\n  \u003cp\u003eOver time, batteries in handheld remotes degrade, especially in harsh saltwater conditions where corrosion and moisture take a toll. A failing battery can lead to unresponsive controls at the worst moments—like during a tack or when docking in choppy waters. The TA118 addresses this head-on by providing exact-fit replacements that restore full performance. The included seal kit reinforces waterproofing, preventing leaks that could short-circuit internals and extend the life of your device.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Benefits for Boaters\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eExtended Runtime:\u003c\/strong\u003e High-capacity batteries deliver consistent power for extended cruises, giving you confidence without constant recharges.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuperior Waterproofing:\u003c\/strong\u003e Custom seals create a barrier against spray, rain, and submersion, ideal for open-deck use.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEasy Swap:\u003c\/strong\u003e No tools required for most installations, so you can refresh your remotes dockside in minutes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGenuine Compatibility:\u003c\/strong\u003e Engineered to match Raymarine's specs, avoiding issues with aftermarket parts that might void warranties or underperform.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePeace of Mind:\u003c\/strong\u003e Reliable operation means safer navigation, especially solo or in low visibility.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect Fit for Your Setup\u003c\/h2\u003e\n  \u003cp\u003eThis kit is tailored for Raymarine 2-up wireless controllers, commonly found in Evolution autopilot systems and other SeaTalk ng-enabled remotes. It slots seamlessly into models used by sailors, powerboaters, and offshore adventurers. If your remote shows signs like dim displays, erratic signals, or swelling batteries, it's time for this upgrade.\u003c\/p\u003e\n\n  \u003ch2\u003eQuick Installation Tips\u003c\/h2\u003e\n  \u003col\u003e\n    \u003cli\u003ePower off and remove the old battery pack by gently prying the cover.\u003c\/li\u003e\n    \u003cli\u003eClean the compartment of any residue or salt buildup with fresh water.\u003c\/li\u003e\n    \u003cli\u003eInsert the new TA118 battery pack, ensuring proper alignment.\u003c\/li\u003e\n    \u003cli\u003eApply the fresh seal evenly around the edges for a snug fit.\u003c\/li\u003e\n    \u003cli\u003eSnap the cover back on and test functionality before heading out.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003ePro tip: Perform this maintenance annually or after heavy use to catch issues early. Store spares in a dry locker for on-demand readiness.\u003c\/p\u003e\n\n  \u003ch2\u003eLong-Term Care for Peak Performance\u003c\/h2\u003e\n  \u003cp\u003eBeyond replacement, protect your investment by rinsing remotes with freshwater after every saltwater exposure. Avoid extreme temperatures during storage, and cycle batteries periodically if not in use. Pairing this kit with regular firmware updates keeps your Raymarine ecosystem at its best, enhancing overall system responsiveness.\u003c\/p\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices is the Raymarine TA118 compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The TA118 is designed for Raymarine 2-up wireless remote controls, including those in Evolution autopilot systems and SeaTalk ng networks. It fits standard handheld models used for steering and navigation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How often should I replace the battery pack in my Raymarine remote?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Replace every 1-2 years or sooner if you notice reduced runtime, failure to power on, or physical swelling. Heavy use in marine conditions accelerates wear.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the seal kit necessary when replacing batteries?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—seals degrade over time from UV exposure and saltwater. A new seal ensures full waterproof integrity, preventing corrosion inside the unit.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use non-Raymarine batteries in my remote?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"While possible, genuine Raymarine batteries like the TA118 provide optimal voltage, capacity, and fit. Third-party options may cause connectivity issues or reduced lifespan.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if my remote doesn't work after installing the TA118 kit?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Double-check alignment and seal placement. Reset the remote by removing batteries for 10 minutes, then re-pair with your display if needed. Persistent issues may indicate a deeper fault.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I store spare TA118 kits?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Keep in a cool, dry place away from direct sunlight. Avoid metal containers to prevent shorts, and check seals periodically for freshness.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this kit improve remote range or signal strength?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Primarily it restores power reliability, but fresh batteries often yield better signal consistency by eliminating weak power draw issues.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003ch3\u003eWhat devices is the Raymarine TA118 compatible with?\u003c\/h3\u003e\n      \u003cp\u003eThe TA118 is designed for Raymarine 2-up wireless remote controls, including those in Evolution autopilot systems and SeaTalk ng networks. It fits standard handheld models used for steering and navigation.\u003c\/p\u003e\n\n      \u003ch3\u003eHow often should I replace the battery pack in my Raymarine remote?\u003c\/h3\u003e\n      \u003cp\u003eReplace every 1-2 years or sooner if you notice reduced runtime, failure to power on, or physical swelling. Heavy use in marine conditions accelerates wear.\u003c\/p\u003e\n\n      \u003ch3\u003eIs the seal kit necessary when replacing batteries?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—seals degrade over time from UV exposure and saltwater. A new seal ensures full waterproof integrity, preventing corrosion inside the unit.\u003c\/p\u003e\n\n      \u003ch3\u003eCan I use non-Raymarine batteries in my remote?\u003c\/h3\u003e\n      \u003cp\u003eWhile possible, genuine Raymarine batteries like the TA118 provide optimal voltage, capacity, and fit. Third-party options may cause connectivity issues or reduced lifespan.\u003c\/p\u003e\n\n      \u003ch3\u003eWhat if my remote doesn't work after installing the TA118 kit?\u003c\/h3\u003e\n      \u003cp\u003eDouble-check alignment and seal placement. Reset the remote by removing batteries for 10 minutes, then re-pair with your display if needed. Persistent issues may indicate a deeper fault.\u003c\/p\u003e\n\n      \u003ch3\u003eHow do I store spare TA118 kits?\u003c\/h3\u003e\n      \u003cp\u003eKeep in a cool, dry place away from direct sunlight. Avoid metal containers to prevent shorts, and check seals periodically for freshness.\u003c\/p\u003e\n\n      \u003ch3\u003eDoes this kit improve remote range or signal strength?\u003c\/h3\u003e\n      \u003cp\u003ePrimarily it restores power reliability, but fresh batteries often yield better signal consistency by eliminating weak power draw issues.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eTA118 2-up battery pack and seal kit \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40849\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e TA118\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193703076\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591482461,"sku":"CWR-40849","price":75.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-2-up-replacement-1.jpg?v=1673145507"},{"product_id":"51963-raymarine-3-up-replacement-battery-pack-and-seal","title":"Raymarine 3-Up Replacement Battery Pack and Seal Kit","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"overview-section\"\u003e\n    \u003ch2\u003eEnsure Uninterrupted Performance with the Raymarine TA119 Battery Pack\u003c\/h2\u003e\n    \u003cp\u003eMaintaining reliable power in demanding marine environments starts with quality replacements like the Raymarine TA119 3-up battery pack and seal kit. Designed specifically for Raymarine's compact communication and navigation devices, this kit delivers consistent voltage and waterproof integrity, keeping your gear operational during critical moments on the water. Whether you're out for a day sail or extended offshore voyages, swapping in fresh batteries restores peak performance without the hassle of mismatched generics.\u003c\/p\u003e\n    \u003cp\u003eCrafted with marine-grade durability in mind, the TA119 pack features pre-assembled AA batteries in a 3-up configuration, paired with a robust seal kit. This setup mimics the original factory assembly, ensuring seamless integration and resistance to corrosion from saltwater exposure, humidity, and vibration.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"whats-included-section\"\u003e\n    \u003ch2\u003eWhat's Included in the TA119 Kit\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003ePre-configured 3-up AA battery pack for direct drop-in replacement\u003c\/li\u003e\n      \u003cli\u003eWaterproof seal kit with O-rings and gaskets for secure, leak-proof closure\u003c\/li\u003e\n      \u003cli\u003eEasy-access design that matches OEM specifications\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThis all-in-one solution minimizes downtime, as everything you need arrives ready to install—no soldering, wiring, or custom fitting required.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-section\"\u003e\n    \u003ch2\u003ePerfect Fit for Key Raymarine Devices\u003c\/h2\u003e\n    \u003cp\u003eThe TA119 shines in powering handheld and fixed-mount VHF radios, AIS transponders, and other battery-dependent Raymarine electronics. It's engineered to match the exact dimensions and electrical output of original packs, preventing issues like poor contact or voltage drops that plague off-brand alternatives. Users report extended runtime in transmit-heavy scenarios, thanks to high-drain alkaline cells optimized for intermittent high-power bursts typical in marine comms.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-section\"\u003e\n    \u003ch2\u003eSimple Step-by-Step Installation Guide\u003c\/h2\u003e\n    \u003cp\u003eReplacing your battery pack takes under five minutes with basic tools. Follow these steps for a flawless swap:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down and remove the device from any mounting bracket.\u003c\/li\u003e\n      \u003cli\u003eCarefully pry open the battery compartment using a non-marring tool.\u003c\/li\u003e\n      \u003cli\u003eExtract the old pack, noting connector orientation.\u003c\/li\u003e\n      \u003cli\u003eInsert the new TA119 pack, ensuring polarity matches.\u003c\/li\u003e\n      \u003cli\u003eApply fresh seals from the kit, lubricating O-rings lightly with silicone grease if available.\u003c\/li\u003e\n      \u003cli\u003eSnap the compartment shut and test power-up.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Inspect seals annually or after heavy submersion to preempt leaks, extending the life of both batteries and your device.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips-section\"\u003e\n    \u003ch2\u003eMaximize Longevity and Reliability\u003c\/h2\u003e\n    \u003cp\u003eTo get the most from your TA119 pack:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eStore spares in a cool, dry place away from direct sunlight to prevent premature discharge.\u003c\/li\u003e\n      \u003cli\u003eAvoid deep discharges by monitoring voltage during long trips—most Raymarine units signal low battery early.\u003c\/li\u003e\n      \u003cli\u003eClean contacts with isopropyl alcohol before installation to ensure solid connections.\u003c\/li\u003e\n      \u003cli\u003eIn cold conditions, warm batteries to room temp prior to use for optimal output.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese habits can double effective runtime compared to neglected generics, based on real-world boater feedback from extended cruises.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-genuine-section\"\u003e\n    \u003ch2\u003eWhy Stick with Genuine Raymarine Replacements\u003c\/h2\u003e\n    \u003cp\u003eCounterfeits often fail under scrutiny: inconsistent capacity, faulty seals leading to water ingress, or mismatched voltage spikes that fry internals. The TA119 upholds Raymarine's standards for shock resistance and thermal stability, crucial when devices endure pounding waves or engine vibrations. Boaters trust it for peace of mind, knowing it supports emergency DSC calls or AIS tracking without falter.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"troubleshooting-section\"\u003e\n    \u003ch2\u003eQuick Fixes for Common Battery Issues\u003c\/h2\u003e\n    \u003cp\u003eFacing power glitches? Check these first:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eNo power:\u003c\/strong\u003e Verify connections and reseat the pack.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShort runtime:\u003c\/strong\u003e Test with a multimeter; replace if under spec.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWater damage:\u003c\/strong\u003e Always refresh seals post-exposure.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eErratic display:\u003c\/strong\u003e Clean corrosion and ensure tight compartment fit.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eRegular TA119 rotations keep issues at bay, saving costly repairs down the line.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What devices is the Raymarine TA119 battery pack compatible with?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"The TA119 fits select Raymarine VHF radios, AIS units, and similar battery-powered marine electronics requiring a 3-up AA configuration.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How long does the TA119 battery pack last in typical use?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Runtime varies by usage, but expect 8-12 hours of active transmit\/receive cycles, longer in standby mode, outperforming many generics.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the seal kit necessary for every replacement?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, always replace seals to maintain waterproofing—old ones degrade, risking device failure in wet conditions.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use rechargeable batteries in place of the TA119?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Raymarine recommends alkaline disposables like the TA119 for reliable high-drain performance; rechargeables may underperform.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my device won't power on after installing the TA119?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Double-check polarity, clean contacts, and ensure seals are properly seated. Test pack voltage externally if needed.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I store spare TA119 packs for long-term voyages?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Keep in a sealed bag in a cool, dry locker; shelf life exceeds 3 years when stored properly.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does the TA119 resist saltwater corrosion?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, the seal kit and materials provide robust protection, but rinse devices after exposure and inspect seals regularly.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n      \u003cdiv class=\"faq-list\"\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eWhat devices is the Raymarine TA119 battery pack compatible with?\u003c\/h3\u003e\n          \u003cp\u003eThe TA119 fits select Raymarine VHF radios, AIS units, and similar battery-powered marine electronics requiring a 3-up AA configuration.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eHow long does the TA119 battery pack last in typical use?\u003c\/h3\u003e\n          \u003cp\u003eRuntime varies by usage, but expect 8-12 hours of active transmit\/receive cycles, longer in standby mode, outperforming many generics.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eIs the seal kit necessary for every replacement?\u003c\/h3\u003e\n          \u003cp\u003eYes, always replace seals to maintain waterproofing—old ones degrade, risking device failure in wet conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eCan I use rechargeable batteries in place of the TA119?\u003c\/h3\u003e\n          \u003cp\u003eRaymarine recommends alkaline disposables like the TA119 for reliable high-drain performance; rechargeables may underperform.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eWhat if my device won't power on after installing the TA119?\u003c\/h3\u003e\n          \u003cp\u003eDouble-check polarity, clean contacts, and ensure seals are properly seated. Test pack voltage externally if needed.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eHow do I store spare TA119 packs for long-term voyages?\u003c\/h3\u003e\n          \u003cp\u003eKeep in a sealed bag in a cool, dry locker; shelf life exceeds 3 years when stored properly.\u003c\/p\u003e\n        \u003c\/div\u003e\n        \u003cdiv class=\"faq-item\"\u003e\n          \u003ch3\u003eDoes the TA119 resist saltwater corrosion?\u003c\/h3\u003e\n          \u003cp\u003eYes, the seal kit and materials provide robust protection, but rinse devices after exposure and inspect seals regularly.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eTA119 3-up Battery Pack and Seal Kit \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40852\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e TA119\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 723193703083\u003cbr\u003e\n            ","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":32677591547997,"sku":"40852","price":77.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/raymarine-3-up-replacement-1.jpg?v=1673145510"}],"url":"https:\/\/nvnmarine.com\/collections\/raymarine-products-accessories.oembed?page=4","provider":"NVN Marine","version":"1.0","type":"link"}