RAM Mount surface mount bases and arms anchor your gear to flat surfaces with the rugged ball and socket system. Build a mount that holds in rough water. Choosing RAM Surface Mounts RAM surface mounts attach to a flat panel or deck and use the ball and socket system to position your gear at any angle. Start with the ball size, commonly 1 inch and 1.5 inch, since that size must match every piece in the chain from base to device holder. Base patterns include AMPS hole pattern, diamond, and round bases, so pick the one that matches your mounting surface and hardware. Double socket arms link two balls and come in short and long lengths to set the reach...
Steel Adhesive Plate Adapter for Magnetic Mounts This round steel adhesive plate is an ideal solution for enabling any RAM® magnetic base – eliminating the need to drill into...
Composite Drill-Down Double Ball Mount with Rectangle AMPS Plates This composite drill-down double ball mount features two AMPS hole pattern bases with 1" diameter balls. Each base has four...
Spacer Plate Accessory for Flush Mounting A great addition to any surface mounting application, the RAM® cable manager creates an integrated route for electrical wiring and cleanly covers installation...
Double Ball Mount with 1/4"-20 Male ThreadThe RAM-B-101AU consists of a double socket arm, one 2.5" diameter round base with the universal AMPS hole pattern and universal camera/camcorder...
D Size 2.25" Ball Mount with 2 qty 3.68" Round Plates & Short Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and SHORT...
Triple Suction Cup Base with 1.5" BallThe RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong...
D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket ArmThe RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD...
Composite 1" Ball Short Length Double Socket Arm w/2.5" Round Base Including AMPs Hole PatternThe RAP-B-103U-A consists of a 2.5" round base and SHORT double socket arm that...
Tough-Track™ Overall Length - 14.5"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution...
Tough-Track™ Overall Length - 10.75"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution...
Tough-Track™ Overall Length - 7"With the RAM Tough-Track, flat surface mounting possibilities are nearly endless for ATVs, cars, combines, motorboats, tractors, trucks, and more. This track mount solution...
Triple Magnetic 2.5" Round Base with 1" BallConsists of a 1" diameter rubber ball connected to a flat 2.5" diameter base and triple magnetic base adapter. The 2.5"...
RAM 1.5" Ball Flat Surface Mount w/ Short Double Socket Arm, 2.5" Round Base and Diamond BaseThe RAM-138U-B consists of a 2.5" diameter round base that contains the...
RAM Mount 1.5" Diameter Ball Flat Surface Mount w/2.5" Round Base & Diamond BaseThe RAM-138U consists of a 2.5" diameter round base that contains the universal AMPs hole...
RAM Mount 1" Diameter Ball Mount w/Long Double Socket Arm & 2/2.5" Round Bases - AMPS Hole Pattern (7-5/16" Length)The RAM-B-101U-C consists of a long double socket arm...
The RAP-111U consists of a 2" x 1.7" 2" x 1.7" square base that contains the universal AMPs hole pattern, STANDARD LENGTH double socket arm and 6.25" x...
The RAM-101U-B-246 consists of a short double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern....
RAM 1.5" Diameter Ball Mount with Short Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-B-2461 consists...
1.5" Diameter Ball Mount with Long Double Socket Arm, 2.5" Round Base (AMPs Hole Pattern) & 3.625" Square Base (VESA 75mm X 75mm Hole Pattern)The RAM-101U-D-2461 consists of...
The RAM-101U-D-246 consists of a long double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and 4.75" square plate with the VESA hole pattern....
4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 1.5" Rubber Ball SizeThe RAM-101U-246 consists of a double socket arm, 2.5" diameter round base...
4.75" Square Base VESA 75mm & 100mm Hole Patterns with Surface Mount - 2.25" Rubber Ball "D" SizeThe RAM-D-101U-246, heavy duty universal assembly, includes a universal base piece...
Ram 1" Diameter Ball Mount with 2/2.5" Round Bases and Short ArmThe RAM-B-101-A consists of a SHORT double socket arm and two 2.5" diameter round bases that contain...
RAM 6.25" X 2" Rectangle Base with 1" BallThe RAM-B-111BU consists 1" diameter rubber ball connected to a flat 6.25" x 2" rectangle base. The base contains different...
RAM Mount surface mount bases and arms anchor your gear to flat surfaces with the rugged ball and socket system. Build a mount that holds in rough water.
RAM surface mounts attach to a flat panel or deck and use the ball and socket system to position your gear at any angle. Start with the ball size, commonly 1 inch and 1.5 inch, since that size must match every piece in the chain from base to device holder. Base patterns include AMPS hole pattern, diamond, and round bases, so pick the one that matches your mounting surface and hardware. Double socket arms link two balls and come in short and long lengths to set the reach you need. Build the mount as a chain of matching ball sizes and you get a solid, adjustable hold that stands up to vibration and chop.
Choose a ball size, commonly 1 inch or 1.5 inch, and keep it consistent across the base, arm, and device holder so every piece connects.
Match the base to your surface and hardware. RAM offers AMPS hole pattern, diamond, and round bases for different mounting points.
It links two balls and lets you angle and extend the mount. Short and long arms set how far the gear reaches from the base.
