RAM marine electronics mounts hold your fishfinder or chartplotter steady with model-specific cradles. Find the mount cut for your Garmin, Lowrance, or Humminbird unit. Choosing RAM Marine Electronics Mounts RAM marine electronics mounts use the ball and socket system to position a fishfinder or chartplotter at the angle you want, with many cradles cut for a specific device. Start by matching the mount to your exact unit, such as a Garmin echo, a Lowrance Elite or Mark, or a Humminbird Helix model, since the plate and hole pattern are made to fit. Pick the ball size, commonly 1 inch or 1.5 inch, and keep it consistent through the base, arm, and plate. Light use composite mounts suit smaller displays, while...
RAM Trolling Motor Stabilizer MountThe RAP-400-202U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and Tough-Claw®. The trolling motor...
Single 6" Swing Arm with 6.25" x 2" Rectangle Base and Vertical Mounting BaseThe RAM single swing arm mount consists of a 6" long swing arm mounted on...
The RAM-D-111U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one 3-3/4" diameter round base with 2.25" rubber ball and flat 11" x...
RAM® Composite Universal Marine Electronic MountThe RAP-B-111U consists of a 2" x 2.5" rectangle base, STANDARD length double socket arm and 6.25" x 2" rectangle plate. The rectangle...
RAM Mount 2.25" Ball Mount with 3.68" Round Base & 2" x 5" Rectangular Base for Humminbird HELIX 9, 10 & 12The RAM-D-202-25-C-202, powder coated marine grade aluminum...
Surface Mount for Humminbird HELIX 7The RAM-202-24-202U, powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2.5" diameter round base with the...
RAM Trolling Motor Stabilizer MountThe RAM-108U consists of a double socket arm, 2.5" diameter round base that contains the universal AMPs hole pattern and single strap base. The...
1.5" Ball Mount with 2.5" Round Base, Short Arm & 2" x 4" Plate for the Humminbird Helix 7 OnlyThe RAM-202-24-B-202U, powder coated marine grade aluminum mount, consists...
Double 6" Swing Arm with 6.25" x 2" Rectangle Base and Horizontal Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on...
RAM Large Cable Manager f/2.25" Diameter Ball BasesThe RAM Cable Manager creates an integrated route for electrical wiring and cleanly covers installation holes. A great addition to any...
1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 OnlyThe RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs...
Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm...
Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and ChartplottersThe RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm...
RAM Composite 1" Ball Mount with 6.25" X 2" Rectangular Plate & Track Ball™ BaseThe RAP-B-111B-354-TRA1U consists of a Track Ball™ base, composite double socket arm and 6.25"...
RAM® Heavy Duty Fishfinder Deck MountThe RAM® Heavy Duty Fishfinder Deck Mount (RAM-FF1U) is a robust, powder-coated aluminum bracket designed to support up to three fishfinders simultaneously. Whether...
Fishfinder Mount for Lowrance Hook2 Series - 1" Track MountDesigned for light duty fresh water use, this B size (1”) Track Ball™ kit for the Lowrance Hook² allows...
D Size 2.25" Ball Mount w/11" X 3" Rectangle Plate, 3.68" Round Plate and Hi-Torq™ WrenchThe RAM-D-111U-C consists of a short double socket arm, 3.68" diameter round base...
RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ BaseThe RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to...
Vertical Double 6" Swing Arms w/6.25" X 2" Rectangle Base & Vertical Mounting BaseThe RAM double swing arm mount includes two 6" long BENT swing arms mounted on...
LED Spotlight Mount with Medium Size Tough-ClawThe RAM Mounts LED Spotlight has been completely redesigned. We have integrated a new LED bulb that yields a brighter and more...
Ram Mixed Combination Pin-Lock™ Security Knob, Stud and Key Knob f/ Gimbal BracketsThe RAM® Gimbal Security Knob is a great solution for securing your gimbal mounted electronics, whether...
RAM 1.5" Ball Marine Electronic "Rugged Use" Mount f/the Lowrance Elite 5 SeriesPart #: RAM-101-LO11The RAM-101-LO11 consists of a double socket arm, 2.5" diameter round base with the...
RAM Quick Release Adapter with 1" Diameter Ball for "LIGHT USE" Lowrance Elite-4 & Mark-4 Series FishfindersThe RAM adapter base includes a 1" diameter rubber ball and inserts...
RAM Quick Release Adapter with 1.5" Diameter Ball for "Rugged Use" Lowrance Elite-5 & Mark-5 Series FishfindersPart #: RAM-202U-LO11The RAM adapter base includes a 1.5" diameter rubber ball...
RAM marine electronics mounts hold your fishfinder or chartplotter steady with model-specific cradles. Find the mount cut for your Garmin, Lowrance, or Humminbird unit.
RAM marine electronics mounts use the ball and socket system to position a fishfinder or chartplotter at the angle you want, with many cradles cut for a specific device. Start by matching the mount to your exact unit, such as a Garmin echo, a Lowrance Elite or Mark, or a Humminbird Helix model, since the plate and hole pattern are made to fit. Pick the ball size, commonly 1 inch or 1.5 inch, and keep it consistent through the base, arm, and plate. Light use composite mounts suit smaller displays, while rugged mounts handle larger units and rougher water. Confirm your display model against the listing so the cradle fits without adapters.
Many are. The plate and hole pattern are cut for a specific unit like a Garmin echo, Lowrance Elite, or Humminbird Helix, so match the mount to your exact model.
Light use composite mounts suit smaller displays, while rugged mounts handle larger units and rougher conditions. Choose by display size and how hard you run.
Common sizes are 1 inch and 1.5 inch. Keep the ball size consistent across the base, arm, and cradle so the whole mount connects.
