{"title":"Polyform U.S. Fenders","description":"\u003cp class=\"nvn-collection-hero\"\u003ePolyform fenders take the hit so your hull does not. Size them to your boat, carry enough, and hang them right to protect your topsides at the dock and in a raft-up.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-collection-guide\"\u003e\n\u003cp\u003eFenders are cheap insurance for an expensive hull, and Polyform U.S. has set the standard for inflatable vinyl boat fenders for decades. This collection covers the full range, from small fenders for runabouts to big commercial-grade fenders for cruisers and trawlers. Choosing right comes down to size, the right series for how you hang them, and carrying enough.\u003c\/p\u003e\n\u003ch2\u003eSize the fender to your boat\u003c\/h2\u003e\n\u003cp\u003eBigger and heavier boats need larger fenders to absorb the load and keep the hull off the dock. As a general rule, plan for at least one inch of fender diameter for every four to five feet of boat length, and step up if you dock in rough water or against pilings. Undersized fenders compress to nothing and let the hull contact the dock, which defeats the purpose.\u003c\/p\u003e\n\u003ch2\u003eTwin-eye or center-hole\u003c\/h2\u003e\n\u003cp\u003ePolyform F-series fenders have a molded eye at each end, so you hang them with a line through both eyes, which is great for vertical hanging along a hull. G and HTM series fenders use a center rope tube running through the middle, which suits hanging from a single point or rolling along a piling. Pick the series that matches how you tie up.\u003c\/p\u003e\n\u003ch2\u003eCarry enough fenders\u003c\/h2\u003e\n\u003cp\u003eOne fender does not protect a boat. A common guideline is at least three fenders for boats up to the mid-twenties in length, and more as the boat grows, plus a spare or two. You want enough to cover the contact points at the dock and to fend off in a raft-up or lock.\u003c\/p\u003e\n\u003ch2\u003eHang them right\u003c\/h2\u003e\n\u003cp\u003eHang fenders at the waterline where the hull meets the dock, and adjust the height for the tide and the dock face. Vertical hanging works along a flat dock, while horizontal hanging spreads protection against pilings. A fender board over two fenders is the trick for rough pilings.\u003c\/p\u003e\n\u003ch2\u003eInflation and care\u003c\/h2\u003e\n\u003cp\u003ePolyform fenders inflate with a needle through the valve to a firm but not rock-hard feel, leaving a little give to absorb shock. Rinse them to keep the vinyl clean, and top off the air as temperature changes. Choose a color that hides dock scuffs if you dock often.\u003c\/p\u003e\n\u003ch2\u003eMaterials and storage\u003c\/h2\u003e\n\u003cp\u003ePolyform fenders are made from marine-grade vinyl that resists UV, oil, and abrasion common around docks. When the season ends, deflate them partway, coil the lines, and store the fenders in a cool dry place away from direct sun. Proper storage keeps the vinyl supple and extends service life for many seasons.\u003c\/p\u003e\n\u003cp\u003eNot sure what size or how many you need? Tell our crew your boat length and where you dock, and we will match the fender size, series, and count so your hull stays protected.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-collection-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat size fenders do I need?\u003c\/summary\u003e\n    \u003cp\u003ePlan for at least one inch of fender diameter per four to five feet of boat length, and step up if you dock in rough water or against pilings. Undersized fenders compress and let the hull contact the dock, so size up when in doubt.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat is the difference between twin-eye and center-hole fenders?\u003c\/summary\u003e\n    \u003cp\u003eTwin-eye F-series fenders have an eye at each end for hanging a line through both, ideal for vertical hanging along a hull. Center-hole G and HTM fenders have a rope tube through the middle for single-point hanging or rolling along a piling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow many fenders should I carry?\u003c\/summary\u003e\n    \u003cp\u003eOne fender will not protect a boat. Carry at least three for boats up to the mid-twenties in length, and more as the boat grows, plus a spare or two for raft-ups and locks. You want every dock contact point covered.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow firm should I inflate a fender?\u003c\/summary\u003e\n    \u003cp\u003eInflate with a needle through the valve to a firm but not rock-hard feel, leaving a little give to absorb shock. A fender pumped bone-hard transmits the load instead of cushioning it, and top off the air as temperature changes.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I protect against pilings?\u003c\/summary\u003e\n    \u003cp\u003eHang fenders horizontally to spread protection, and use a fender board placed over two fenders for rough pilings. Adjust the height for the tide so the fenders stay between the hull and the piling.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRelated Collections\u003c\/h2\u003e\n\u003cul class=\"nvn-related-collections\"\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/anchoring-docking\"\u003eAnchoring \u0026amp; Docking\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/polyform-u-s-products\"\u003ePolyform U.S.\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/anchoring-docking-cleats\"\u003eCleats\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"CollectionPage\",\n    \"name\": \"Polyform U.S. Fenders\",\n    \"description\": \"Shop Polyform U.S. boat fenders: twin-eye and center-hole inflatable fenders in every size. Protect your hull at the dock. Same-day shipping from NVN Marine.\",\n    \"url\": \"https:\/\/www.nvnmarine.com\/collections\/polyform-u-s-products-fenders\"\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"BreadcrumbList\",\n    \"itemListElement\": [\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 1,\n            \"name\": \"Home\",\n            \"item\": \"https:\/\/www.nvnmarine.com\"\n        },\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 2,\n            \"name\": \"Polyform U.S. Fenders\",\n            \"item\": \"https:\/\/www.nvnmarine.com\/collections\/polyform-u-s-products-fenders\"\n        }\n    ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What size fenders do I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Plan for at least one inch of fender diameter per four to five feet of boat length, and step up if you dock in rough water or against pilings. Undersized fenders compress and let the hull contact the dock, so size up when in doubt.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What is the difference between twin-eye and center-hole fenders?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Twin-eye F-series fenders have an eye at each end for hanging a line through both, ideal for vertical hanging along a hull. Center-hole G and HTM fenders have a rope tube through the middle for single-point hanging or rolling along a piling.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How many fenders should I carry?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"One fender will not protect a boat. Carry at least three for boats up to the mid-twenties in length, and more as the boat grows, plus a spare or two for raft-ups and locks. You want every dock contact point covered.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How firm should I inflate a fender?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Inflate with a needle through the valve to a firm but not rock-hard feel, leaving a little give to absorb shock. A fender pumped bone-hard transmits the load instead of cushioning it, and top off the air as temperature changes.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I protect against pilings?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Hang fenders horizontally to spread protection, and use a fender board placed over two fenders for rough pilings. Adjust the height for the tide so the fenders stay between the hull and the piling.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","products":[{"product_id":"47893-polyform-g-1-twin-eye-fender-3-5-x","title":"Polyform G-1 Twin Eye Fender 3.5\u0026quot; x 12.8\u0026quot; - Black","description":"\u003cb\u003eG-1 Twin Eye Fender 3.5\" x 12.8\" - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003e Even wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 3.5\" x 12.8\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 11 in \u003cbr\u003e\u003cbr\u003eG-1 double-eye mudguard 3.5 inches x 12 inches. The 8-inch-black polyform g series fender improves the quality and appearance standards of the multifunctional fender. subscription...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36782\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-1-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003001\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536368414813,"sku":"CWR-36782","price":14.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-1-twin-1.jpg?v=1673080530"},{"product_id":"47894-polyform-g-1-twin-eye-fender-3-5-x","title":"Polyform G-1 Twin Eye Fender 3.5\u0026quot; x 12.8\u0026quot; - Blue","description":"\u003cb\u003eG-1 Twin Eye Fender 3.5\" x 12.8\" - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 3.5\" x 12.8\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 11 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standards of the Polyform G series are higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36783\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 05-117-533\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003018\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536368480349,"sku":"CWR-36783","price":17.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-1-twin-1_e6600c2a-3818-4b9b-ade4-8607019c5d17.jpg?v=1673080536"},{"product_id":"47895-polyform-g-1-twin-eye-fender-3-5-x","title":"Polyform G-1 Twin Eye Fender 3.5\u0026quot; x 12.8\u0026quot; - White","description":"\u003cb\u003eG-1 Twin Eye Fender 3.5\" x 12.8\" - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 3.5\" x 12.8\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 11 in  \u003cbr\u003e\u003cbr\u003eG-1 double-eye fender 3.5 inches x 12.8 inches-the white polyform g series fender improves the quality and appearance standards of the multifunctional fender. subscription...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36784\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 68-323-692\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003056\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536368545885,"sku":"CWR-36784","price":14.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-1-twin-1_bc6cf3d9-bef9-4588-ab81-2b106a91ffc4.jpg?v=1673080542"},{"product_id":"47896-polyform-g-2-twin-eye-fender-4-5-x","title":"Polyform G-2 Twin Eye Fender 4.5\u0026quot; x 15.5\u0026quot; - Black","description":"\u003cb\u003eG-2 Twin Eye Fender 4.5\" x 15.5\" - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 4.5\" x 15.5\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 1\/2 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 14.1 in  \u003cbr\u003e\u003cbr\u003ePolyform USA G series inflatable mudguards. 4.5 inches in diameter x 15.5 inches in length. Colour: Black. Polyform G fenders are blow-molded from marine-grade vinyl materials. Intended for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36785\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 06-198-906\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003063\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536368775261,"sku":"36785","price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-2-twin-1.jpg?v=1673080548"},{"product_id":"47897-polyform-g-2-twin-eye-fender-4-5-x","title":"Polyform G-2 Twin Eye Fender 4.5\u0026quot; x 15.5\u0026quot; - Blue","description":"\u003cb\u003eG-2 Twin Eye Fender 4.5\" x 15.5\" - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 4.5\" x 15.5\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 1\/2 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 14.1 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of the Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36786\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 04-271-298\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003070\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536368873565,"sku":"36786","price":12.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-2-twin-1_4c1e0a5c-0c6b-478a-96f1-2be3e59b0b61.jpg?v=1673080553"},{"product_id":"47898-polyform-g-2-twin-eye-fender-4-5-x","title":"Polyform G-2 Twin Eye Fender 4.5\u0026quot; x 15.5\u0026quot; - White","description":"\u003cb\u003eG-2 Twin Eye Fender 4.5\" x 15.5\" - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 4.5\" x 15.5\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 1\/2 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 14.1 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standards of the Polyform G series are higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36787\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 45-162-056\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003124\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369004637,"sku":"CWR-36787","price":17.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-2-twin-1_27a7ae72-3975-42e2-8332-43dbf9973d88.jpg?v=1673080559"},{"product_id":"47899-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - Black","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003eThe G series marine fenders improve the quality and appearance standards of practical fenders. Following the philosophy that quality does not cost more, we include ribs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36788\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 73-389-943\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003131\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369102941,"sku":"CWR-36788","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1.jpg?v=1673080565"},{"product_id":"47900-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - Blue","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 17.3 in  \u003cbr\u003e\u003cbr\u003eSH10 fixed bullet head-10mm stainless steel bullet head-f \/ 11-44lb. There must be a rotation or shackle between the anchor and the ship e to allow the anchor to enter the bow.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36789\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-3-BLUEWO\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369201245,"sku":"36789","price":14.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1_d808135e-d54f-4733-85f7-fbfef31a8d36.jpg?v=1673080571"},{"product_id":"47901-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - White","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 17.3 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36790\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 83-408-891\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003193\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369430621,"sku":"CWR-36790","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1_a9a80d4c-af40-4fed-84a0-2577878945ab.jpg?v=1673080578"},{"product_id":"47902-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5\" x 19\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 17.3 in  \u003cbr\u003e\u003cbr\u003eThe G series marine fenders improve the quality and appearance standards of practical fenders. Following the philosophy that quality does not cost more, we include ribs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36791\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-3-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 00743952003131\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369496157,"sku":"CWR-36791","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1_3c7a9fd1-94b6-41bb-b3f0-e18eb8e9198b.jpg?v=1673080581"},{"product_id":"47903-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5\" x 19\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 17.3 in  \u003cbr\u003e\u003cbr\u003eSH10 fixed bullet head-10mm stainless steel bullet head-f \/ 11-44lb. There must be a rotation or shackle between the anchor and the ship e to allow the anchor to enter the bow.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36792\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-3-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369594461,"sku":"CWR-36792","price":19.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1_f8fca2a8-5f29-4e2f-b2c9-2728981bd20c.jpg?v=1673080587"},{"product_id":"47904-polyform-g-3-twin-eye-fender-5-5-x","title":"Polyform G-3 Twin Eye Fender 5.5\u0026quot; x 19\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eG-3 Twin Eye Fender 5.5\" x 19\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 5.5\" x 19\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 17.3 in  \u003cbr\u003e\u003cbr\u003eThe nf series combines the style of the g series with the multi-ribbed rope support of the f series. The smooth monochromatic shape strengthens the double-eye rope fixing device, which is flexible and flexible.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36793\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-3-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 995476299495\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369659997,"sku":"CWR-36793","price":19.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-3-twin-1_7680e7d0-c801-40fc-ab86-2fe862572b88.jpg?v=1673080593"},{"product_id":"47905-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; - Black","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5 x 23 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36794\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 22-830-435\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003209\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369791069,"sku":"CWR-36794","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1.jpg?v=1673080599"},{"product_id":"47906-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; - Blue","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5 x 23 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36795\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 44-714-290\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003216\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536369856605,"sku":"CWR-36795","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1_e8fe94fe-22f1-4f56-a673-1c028517c3b9.jpg?v=1673080604"},{"product_id":"47907-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; White","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5 x 23 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003ePolyform USA G series inflatable mudguards. 6.5 inches in diameter x 23 inches in length. White color. Polyform G fenders are blow-molded from marine-grade vinyl materials. Intended for...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36796\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 63-267-743\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003278\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536370217053,"sku":"CWR-36796","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1_f0ceebd2-7efd-4e0c-9db4-b73bfe0d0e7d.jpg?v=1673080613"},{"product_id":"47908-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5\" x 22\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of the Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36797\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-4-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536370315357,"sku":"CWR-36797","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1_5c825cc6-459d-436f-b23f-b451a7a78a61.jpg?v=1673080616"},{"product_id":"47909-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5\" x 22\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36798\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-4-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 995475551778\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536370413661,"sku":"CWR-36798","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1_2ee325b3-5e0d-4b98-bd02-69b0c8652dab.jpg?v=1673080622"},{"product_id":"47910-polyform-g-4-twin-eye-fender-6-5-x","title":"Polyform G-4 Twin Eye Fender 6.5\u0026quot; x 22\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eG-4 Twin Eye Fender 6.5\" x 22\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.5\" x 22\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 20.4 in  \u003cbr\u003e\u003cbr\u003eAdhering to the concept of quality without spending more money, we include ribs for increased strength, inflation valves for larger sizes, and reinforced rope fixing areas for the following purposes:\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36799\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-4-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 316000808257\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536370511965,"sku":"CWR-36799","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-4-twin-1_f5e6222e-ba58-4b03-85fb-61ae3d018d09.jpg?v=1673080628"},{"product_id":"47911-polyform-g-5-twin-eye-fender-8-8-x","title":"Polyform G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; - Black","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5 x 27 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003ePolyform G series G-5 black Polyforms G series fenders were first produced in the mid-1980s and immediately became the standard for all other practical fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36800\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 49-941-328\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003285\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536370643037,"sku":"36800","price":55.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-5-twin-1.jpg?v=1673080638"},{"product_id":"47912-polyform-g-5-twin-eye-fender-8-8-x","title":"Polyform G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; - Blue","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5 x 27 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36801\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-5-BLUEWO\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952901864\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371003485,"sku":"36801","price":53.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-5-twin-1_bd0b6412-e912-49f0-8206-e6164a8fb42f.jpg?v=1673080644"},{"product_id":"47913-polyform-g-5-twin-eye-fender-8-8-x","title":"Polyform G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; - White","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5 x 27 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003ePolyform G Series G-5 White Polyforms G Series fenders were first produced in the mid-1980s and immediately became the standard for all other practical fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36802\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 41-639-559\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003353\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371069021,"sku":"CWR-36802","price":55.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-5-twin-1_1cce249f-f5e2-4796-af14-266aea8f7075.jpg?v=1673080647"},{"product_id":"47914-polyform-s-g-5-twin-eye-fender-8-8-x","title":"Polyform's G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; Black w\/Air Adapter","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.8\" x 26.8\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of the Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36803\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-5-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952018616\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371200093,"sku":"CWR-36803","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-s-g-5-1.jpg?v=1673080651"},{"product_id":"47915-polyform-g-5-twin-eye-fender-8-8-x","title":"Polyform G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.8\" x 26.8\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standards of the Polyform G series are higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36804\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-5-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 995478271963\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371298397,"sku":"CWR-36804","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-5-twin-1_6d9eacd3-9be7-48b9-b7b4-fe729a5ff800.jpg?v=1673080654"},{"product_id":"47916-polyform-g-5-twin-eye-fender-8-8-x","title":"Polyform G-5 Twin Eye Fender 8.8\u0026quot; x 26.8\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eG-5 Twin Eye Fender 8.8\" x 26.8\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.8\" x 26.8\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 3\/4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in  \u003cbr\u003e\u003cbr\u003ePolyform G Series G-5 White Polyforms G Series fenders were first produced in the mid-1980s and immediately became the standard for all other practical fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36805\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-5-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 995478977919\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371396701,"sku":"CWR-36805","price":55.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-5-twin-1_a49a466b-bc1b-467c-a274-5f2eb8cd5d5b.jpg?v=1673080660"},{"product_id":"47917-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11 x 30 - Black","description":"\u003cb\u003eG-6 Twin Eye Fender 11 x 30 - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5 x 30 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of the Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36806\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 71-201-180\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003360\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371462237,"sku":"CWR-36806","price":83.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1.jpg?v=1673080663"},{"product_id":"47918-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11 x 30 - Blue","description":"\u003cb\u003eG-6 Twin Eye Fender 11 x 30 - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5 x 30 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36807\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 65-871-829\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003377\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536371593309,"sku":"36807","price":87.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1_89c98519-eca6-4847-b21d-0a8fb09b0c09.jpg?v=1673080672"},{"product_id":"47919-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11 x 30 - White","description":"\u003cb\u003eG-6 Twin Eye Fender 11 x 30 - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5 x 30 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36808\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 41-137-889\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003414\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536372838493,"sku":"36808","price":72.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1_ea58ad6f-aa03-46b8-8f22-fd6226f92ab0.jpg?v=1673080680"},{"product_id":"47920-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11\u0026quot; x 30\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eG-6 Twin Eye Fender 11\" x 30\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 11\" x 30\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003eG-6 double eye fender 11\" x 30\"-black, with\/air adapter Polyform G series fender improves the quality and appearance of practical fender. The philosophy of subscription quality...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36809\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-6-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 013179092837\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536373100637,"sku":"CWR-36809","price":72.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1_5b2154ee-21d9-47de-8c4e-4eeea1c07da4.jpg?v=1673080686"},{"product_id":"47921-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11\u0026quot; x 30\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eG-6 Twin Eye Fender 11\" x 30\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 11\" x 30\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003eThe manufacturing standard of Polyform G series is higher than other multifunctional marine fenders made in the United States, aiming to become the most valuable recreational marine fenders.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36810\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-6-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 013179092264\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536373657693,"sku":"CWR-36810","price":73.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1_b97e40e2-c7e5-414a-a8e7-5871dae40a00.jpg?v=1673080692"},{"product_id":"47922-polyform-g-6-twin-eye-fender-11-x","title":"Polyform G-6 Twin Eye Fender 11\u0026quot; x 30\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eG-6 Twin Eye Fender 11\" x 30\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePolyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced ropeholds \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use by trailered boats and permanent protected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service. \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 11\" x 30\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Eye Diameter: 7\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33 in  \u003cbr\u003e\u003cbr\u003ePolyforms G series fenders were first produced in the mid-1980s and immediately became the standard for judging all other practical fenders. In this period of time...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36811\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e G-6-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991429755278\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536373755997,"sku":"CWR-36811","price":72.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-g-6-twin-1_49893eaa-5362-4af5-88ed-8eedeec0c2bf.jpg?v=1673080700"},{"product_id":"47923-polyform-htm-1-hole-through-middle-fender-6","title":"Polyform HTM-1 Hole Through Middle Fender 6 x 15 - Black","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6 x 15 - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6 x 15 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 18.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36812\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 79-751-374\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004008\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536374345821,"sku":"36812","price":39.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1.jpg?v=1673080706"},{"product_id":"47924-polyform-htm-1-hole-through-middle-fender-6","title":"Polyform HTM-1 Hole Through Middle Fender 6 x 15 - Blue","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6 x 15 - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6 x 15 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 18.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36813\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 10-377-440\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004015\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536374444125,"sku":"36813","price":49.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1_a9123bf5-611b-43f3-a376-73eeb8354c81.jpg?v=1673080715"},{"product_id":"47925-polyform-htm-1-hole-through-middle-fender-6","title":"Polyform HTM-1 Hole Through Middle Fender 6 x 15 - White","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6 x 15 - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6 x 15 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 18.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36814\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 53-672-247\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004039\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536374476893,"sku":"36814","price":49.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1_cb7e4ac5-0d5f-48e6-857d-6504b95b89f7.jpg?v=1673080718"},{"product_id":"47926-polyform-htm-1-hole-through-middle-fender-6-3","title":"Polyform HTM-1 Hole Through Middle Fender 6.3\u0026quot; x 15.5\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6.3\" x 15.5\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.3\" x 15.5\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 19.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIt is made of high-quality PVC and has a firm rope fixation. The buoy is durable. Conforms to the specifications of the American WaterSki Association for the recording function...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36815\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-1-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991428980787\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536374542429,"sku":"CWR-36815","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1_3f67db51-1b2c-484d-9abe-f6a7683cbaae.jpg?v=1673080723"},{"product_id":"47927-polyform-htm-1-hole-through-middle-fender-6-3","title":"Polyform HTM-1 Hole Through Middle Fender 6.3\u0026quot; x 15.5\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6.3\" x 15.5\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6.3\" x 15.5\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 19.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36816\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-1-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 998826104104\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536374968413,"sku":"CWR-36816","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1_1bf012ca-2734-43e0-b392-9db3ea8baffa.jpg?v=1673080729"},{"product_id":"47928-polyform-htm-1-hole-through-middle-fender-6-3","title":"Polyform HTM-1 Hole Through Middle Fender 6.3\u0026quot; x 15.5\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eHTM-1 Hole Through Middle Fender 6.3\" x 15.5\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 6 .3\" x 15.5\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 19.8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 15 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36817\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-1-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991433734382\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375066717,"sku":"36817","price":39.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-1-hole-1_82cead96-8d5d-4671-86a3-d1c1758ec99a.jpg?v=1673080738"},{"product_id":"47929-polyform-htm-2-hole-through-middle-fender-8","title":"Polyform HTM-2 Hole Through Middle Fender 8 x 20 - Black","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8 x 20 - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 25.1 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36818\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 84-065-681\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004046\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375263325,"sku":"CWR-36818","price":51.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1.jpg?v=1673080747"},{"product_id":"47930-polyform-htm-2-hole-through-middle-fender-8","title":"Polyform HTM-2 Hole Through Middle Fender 8 x 20 - Blue","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8 x 20 - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 25.1 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36819\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 16-436-415\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004053\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375328861,"sku":"CWR-36819","price":58.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1_4b2302b2-0912-44ea-adc9-75dcacf354e9.jpg?v=1673080753"},{"product_id":"47931-polyform-htm-2-hole-through-middle-fender-8","title":"Polyform HTM-2 Hole Through Middle Fender 8 x 20 - White","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8 x 20 - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8 x 20 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 25.1 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36820\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 20-953-038\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004114\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375558237,"sku":"CWR-36820","price":51.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1_7e7d7810-4cb9-4ab2-81da-129bebf6d3de.jpg?v=1673080760"},{"product_id":"47932-polyform-htm-2-hole-through-middle-fender-8-5","title":"Polyform HTM-2 Hole Through Middle Fender 8.5\u0026quot; x 20.5\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8.5\" x 20.5\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5\" x 20.5\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings: 37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36821\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-2-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991429092458\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375656541,"sku":"CWR-36821","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1_b8e4bb6e-fd2b-46a8-bc41-8c90127afcf4.jpg?v=1673080766"},{"product_id":"47933-polyform-htm-2-hole-through-middle-fender-8-5","title":"Polyform HTM-2 Hole Through Middle Fender 8.5\u0026quot; x 20.5\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8.5\" x 20.5\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5\" x 20.5\" \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36822\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 95-396-458\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952003810\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375754845,"sku":"CWR-36822","price":51.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1_c7d8ed18-9f63-4694-b5b3-89ed28d6f3ca.jpg?v=1673080771"},{"product_id":"47934-polyform-htm-2-hole-through-middle-fender-8-5","title":"Polyform HTM-2 Hole Through Middle Fender 8.5\u0026quot; x 20.5\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eHTM-2 Hole Through Middle Fender 8.5\" x 20.5\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 8.5\" x 20.5\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 26.7 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  37 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality tradition of Polyform, HTM (Middle Hole) mudguards are designed to provide maximum protection in a variety of applications. vertical ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36823\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-2-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991431295625\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375820381,"sku":"CWR-36823","price":52.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-2-hole-1_ad64d5d2-fec1-4142-b9fb-51990732e821.jpg?v=1673080778"},{"product_id":"47935-polyform-htm-3-hole-through-middle-fender-10","title":"Polyform HTM-3 Hole Through Middle Fender 10 x 26 - Black","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10 x 26 - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10 x 26 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 31.4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003eThe center tube allows the user to see the position of the mudguard in an instant from vertical to horizontal. These fenders are most suitable for boats under 40'.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36824\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-3-BLACKWO\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952902113\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536375951453,"sku":"36824","price":87.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1.jpg?v=1673080784"},{"product_id":"47936-polyform-htm-3-hole-through-middle-fender-10","title":"Polyform HTM-3 Hole Through Middle Fender 10 x 26 - Blue","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10 x 26 - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10 x 26 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 31.4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36825\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 03-088-059\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004138\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376016989,"sku":"36825","price":109.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1_bfde303b-7bd7-41e4-9ebb-9fc84a06d6cf.jpg?v=1673080787"},{"product_id":"47937-polyform-htm-3-hole-through-middle-fender-10","title":"Polyform HTM-3 Hole Through Middle Fender 10 x 26 - White","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10 x 26 - White\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10 x 26 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 31.4 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36826\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 70-051-909\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004183\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376082525,"sku":"36826","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1_d9c4a38b-87d7-466a-8e0a-ff37e3f2bf52.jpg?v=1673080792"},{"product_id":"47938-polyform-htm-3-hole-through-middle-fender-10-5","title":"Polyform HTM-3 Hole Through Middle Fender 10.5\u0026quot; x 27\u0026quot; - Black w\/Air Adapter","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10.5\" x 27\" - Black w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5\" x 27\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33.0 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003eThe center tube allows the user to see the position of the mudguard in an instant from vertical to horizontal. These fenders are most suitable for boats under 40'.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36827\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-3-BLACK\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991430843490\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376180829,"sku":"CWR-36827","price":90.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1_f993c1d8-8933-4f3d-9e4d-999fcabe7590.jpg?v=1673080799"},{"product_id":"47939-polyform-htm-3-hole-through-middle-fender-10-5","title":"Polyform HTM-3 Hole Through Middle Fender 10.5\u0026quot; x 27\u0026quot; - Blue w\/Air Adapter","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10.5\" x 27\" - Blue w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5 x 27\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33.0 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003ePolyform Htm-3 10 x 26-blue status: new brand: Polyform USA\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36828\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-3-BLUE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991433528318\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376475741,"sku":"CWR-36828","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1_8826a0e1-3daf-4747-8886-e83d42ada627.jpg?v=1673080805"},{"product_id":"47940-polyform-htm-3-hole-through-middle-fender-10-5","title":"Polyform HTM-3 Hole Through Middle Fender 10.5\u0026quot; x 27\u0026quot; - White w\/Air Adapter","description":"\u003cb\u003eHTM-3 Hole Through Middle Fender 10.5\" x 27\" - White w\/Air Adapter\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 10.5\" x 27\"\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 33.0 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  77 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36829\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e HTM-3-WHITE\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 991428993121\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376541277,"sku":"CWR-36829","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-3-hole-1_275280fd-c85e-43c4-aa4e-bd529031b7a4.jpg?v=1673080808"},{"product_id":"47941-polyform-htm-4-hole-through-middle-fender-12","title":"Polyform HTM-4 Hole Through Middle Fender 12 x 34 - Black","description":"\u003cb\u003eHTM-4 Hole Through Middle Fender 12 x 34 - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 12 x 34 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 37.7 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  145 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36830\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 24-890-772\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004190\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376639581,"sku":"36830","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-4-hole-1.jpg?v=1673080815"},{"product_id":"47942-polyform-htm-4-hole-through-middle-fender-12","title":"Polyform HTM-4 Hole Through Middle Fender 12 x 34 - Blue","description":"\u003cb\u003eHTM-4 Hole Through Middle Fender 12 x 34 - Blue\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eIn keeping with the Polyform tradition of quality, the HTM (hole through middle) fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from being pulled through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features this high quality fender has to offer. Like our G-Series, this style fender is available in fourteen colors, ready to beautify as well as protect your boat.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cli\u003eEven wall thickness for maximum strength \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Molded in ribs for strength and abrasion resistance \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Reinforced tube ends \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Designed for use in medium duty applications in both permanent protected and unprotected moorings \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Unique Polyform valve for years of service \u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Size: 12 x 34 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Tube Diameter: 5\/8 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Circumference: 37.7 in\u003cbr\u003e\n\u003c\/li\u003e\u003cli\u003e Buoyancy Ratings:  145 lbs \u003cbr\u003e\u003cbr\u003eIn order to maintain the quality and value tradition of Polyform, HTM (Through Hole) fenders are designed to provide maximum protection in a variety of applications. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36831\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 30-347-203\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 743952004206\u003cbr\u003e\n            \u003c\/li\u003e","brand":"Polyform U.S.","offers":[{"title":"Default Title","offer_id":32536376737885,"sku":"36831","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/polyform-htm-4-hole-1_d0b23bcd-30fa-405c-97d9-7b3c05d9e5db.jpg?v=1673080826"}],"url":"https:\/\/nvnmarine.com\/collections\/polyform-u-s-products-fenders.oembed?page=7","provider":"NVN Marine","version":"1.0","type":"link"}