{"title":"NMEA 2000 Networking","description":"\u003cp class=\"nvn-collection-hero\"\u003eNMEA 2000 lets your marine electronics talk to each other. Build the network with a proper backbone, drops, terminators, and the gateways and sensors that tie it all together.\u003c\/p\u003e\n\n\u003cdiv class=\"nvn-collection-guide\"\u003e\n\u003ch2\u003eUnderstanding NMEA 2000 networks\u003c\/h2\u003e\n\u003cp\u003eNMEA 2000 is the standard that lets your chartplotter, engine, sensors, and autopilot share data on one network. This collection gathers the cables, tees, terminators, gateways, and sensors to build it right. A reliable network comes down to a properly built backbone, correct power and termination, and the gateways that bridge older gear.\u003c\/p\u003e\n\u003ch2\u003eBuild a proper backbone\u003c\/h2\u003e\n\u003cp\u003eAn NMEA 2000 network is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone with tees where devices connect. Keep drops within the length limit and terminate both ends with a terminating resistor. A network missing a terminator or built as a chain is the most common reason data drops out, so follow the topology rules.\u003c\/p\u003e\n\u003ch2\u003ePower the network correctly\u003c\/h2\u003e\n\u003cp\u003eThe backbone needs a single power connection from a switched 12 volt source through a power tee. Place the power tee near the middle of the backbone for balanced supply. Size the power tap for the number of devices, since too many loads on an underpowered network causes errors. One power point, correctly placed, keeps voltage even across the bus.\u003c\/p\u003e\n\u003ch2\u003eCables, tees, and terminators\u003c\/h2\u003e\n\u003cp\u003eUse micro and mid cables in the right lengths, tees to branch off to each device, and the correct male and female terminators at the ends. Measure your runs and buy a little slack. Keep spare tees so adding a device later is a plug in, not a rewire. Quality cabling keeps the network solid in a wet, vibrating boat.\u003c\/p\u003e\n\u003ch2\u003eGateways bridge old and new\u003c\/h2\u003e\n\u003cp\u003eIf you have legacy NMEA 0183 gear, a gateway or multiplexer translates between 0183 and NMEA 2000 so the old and new electronics share data. Engine gateways bring analog engine data onto the network. Wi Fi gateways push data to a tablet or phone. Pick the gateway for what you are connecting.\u003c\/p\u003e\n\u003ch2\u003eAdd sensors and displays\u003c\/h2\u003e\n\u003cp\u003eOnce the backbone is in, you can add GPS, heading, wind, depth, tank, and engine sensors, plus displays that read it all. Plan for expansion by leaving spare tees, so the next sensor plugs in cleanly. Not sure how to build or expand your network. Tell our techs your electronics and what you want to connect, and we will match the backbone cables, tees, terminators, power tap, and gateways so everything talks reliably.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"nvn-collection-faq\"\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow is an NMEA 2000 network built?\u003c\/summary\u003e\n    \u003cp\u003eIt is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone, branch to devices with tees, keep drops within the length limit, and terminate both ends with resistors. Missing a terminator is the top cause of dropouts.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I power an NMEA 2000 network?\u003c\/summary\u003e\n    \u003cp\u003eThe backbone needs one power connection from a switched 12 volt source through a power tee, placed near the middle of the backbone for balanced supply. Size the tap to the number of devices so voltage stays even across the bus.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat cables and parts do I need?\u003c\/summary\u003e\n    \u003cp\u003eMicro and mid backbone and drop cables in the right lengths, tees to branch to each device, and correct male and female terminators at the ends. Measure your runs, buy a little slack, and keep spare tees for future devices.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eCan I connect old NMEA 0183 gear?\u003c\/summary\u003e\n    \u003cp\u003eYes, with a gateway or multiplexer that translates between NMEA 0183 and NMEA 2000 so old and new electronics share data. Engine and Wi Fi gateways bring analog engine data or phone connectivity onto the network.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHow do I expand the network later?\u003c\/summary\u003e\n    \u003cp\u003eLeave spare tees on the backbone so adding a sensor or display is a plug in rather than a rewire. As long as you stay within the backbone and drop length limits and keep it terminated, you can keep adding devices.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eWhat length limits apply to NMEA 2000 cables?\u003c\/summary\u003e\n    \u003cp\u003eBackbone length and drop cable length have maximum limits based on cable type. Micro cable supports shorter runs than mid cable. Always check the specifications for your chosen cable size before installation.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRelated Collections\u003c\/h2\u003e\n\u003cul class=\"nvn-related-collections\"\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-instruments\"\u003eMarine Navigation \u0026amp; Instruments\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/marine-navigation-nmea-cables-sensors\"\u003eNMEA Cables \u0026amp; Sensors\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"https:\/\/www.nvnmarine.com\/collections\/electrical\"\u003eElectrical\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"CollectionPage\",\n    \"name\": \"NMEA 2000 Networking\",\n    \"description\": \"Build a reliable NMEA 2000 network with backbone cables, tees, terminators, power taps, and gateways. Shop quality parts with same day shipping from NVN Marine.\",\n    \"url\": \"https:\/\/www.nvnmarine.com\/collections\/nmea-2000-networking\"\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"BreadcrumbList\",\n    \"itemListElement\": [\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 1,\n            \"name\": \"Home\",\n            \"item\": \"https:\/\/www.nvnmarine.com\"\n        },\n        {\n            \"@type\": \"ListItem\",\n            \"position\": 2,\n            \"name\": \"NMEA 2000 Networking\",\n            \"item\": \"https:\/\/www.nvnmarine.com\/collections\/nmea-2000-networking\"\n        }\n    ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How is an NMEA 2000 network built?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"It is a backbone with drop cables to each device, not a daisy chain. Run a continuous backbone, branch to devices with tees, keep drops within the length limit, and terminate both ends with resistors. Missing a terminator is the top cause of dropouts.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I power an NMEA 2000 network?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"The backbone needs one power connection from a switched 12 volt source through a power tee, placed near the middle of the backbone for balanced supply. Size the tap to the number of devices so voltage stays even across the bus.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What cables and parts do I need?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Micro and mid backbone and drop cables in the right lengths, tees to branch to each device, and correct male and female terminators at the ends. Measure your runs, buy a little slack, and keep spare tees for future devices.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"Can I connect old NMEA 0183 gear?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Yes, with a gateway or multiplexer that translates between NMEA 0183 and NMEA 2000 so old and new electronics share data. Engine and Wi Fi gateways bring analog engine data or phone connectivity onto the network.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"How do I expand the network later?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Leave spare tees on the backbone so adding a sensor or display is a plug in rather than a rewire. As long as you stay within the backbone and drop length limits and keep it terminated, you can keep adding devices.\"\n            }\n        },\n        {\n            \"@type\": \"Question\",\n            \"name\": \"What length limits apply to NMEA 2000 cables?\",\n            \"acceptedAnswer\": {\n                \"@type\": \"Answer\",\n                \"text\": \"Backbone length and drop cable length have maximum limits based on cable type. Micro cable supports shorter runs than mid cable. Always check the specifications for your chosen cable size before installation.\"\n            }\n        }\n    ]\n}\n\u003c\/script\u003e\n","products":[{"product_id":"24886-furuno-head-nmea-10m-cable-1-x","title":"Furuno Head\/NMEA 10m Cable - 1 x 6 Pin","description":"Fluxgate Cable 10 Meters, 6 Pin Pigtail\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eEnhance your marine navigation setup with this reliable 10-meter fluxgate cable designed for seamless connectivity in demanding on-water conditions. Engineered for precision and durability, it bridges your fluxgate compass or heading sensor to NMEA interfaces and displays, ensuring accurate data transmission without signal loss over extended distances. Ideal for boaters, sailors, and commercial operators who prioritize dependable performance amid rough seas and constant vibrations.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eEssential Features for Marine Reliability\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended 10-Meter Reach:\u003c\/strong\u003e Provides ample length for flexible routing from sensor to helm station, reducing clutter and enabling clean installations on vessels of all sizes.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust 6-Pin Design:\u003c\/strong\u003e Features a secure 6-pin connector on one end and a versatile pigtail on the other, simplifying custom integrations with various marine electronics.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e Tightly shielded wiring resists electromagnetic interference (EMI), corrosion, and UV exposure, standing up to saltwater splashes and harsh weather.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Minimal setup required—strip the pigtail leads and connect to NMEA 0183 networks or compatible Furuno instruments for immediate heading data flow.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Lightweight:\u003c\/strong\u003e Easy to stow and maneuver during retrofits, without adding unnecessary weight to your setup.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"applications\"\u003e\n    \u003ch2\u003ePerfect for Real-World Marine Applications\u003c\/h2\u003e\n    \u003cp\u003eThis cable shines in autopilot systems, radar overlays, and chartplotters where precise heading information is critical. Fishermen rely on it for stable compass readings during long hauls, while racers appreciate the interference-free signals that keep their course computers sharp. Whether upgrading an older setup or expanding a multifunction display network, it delivers the backbone connectivity that keeps you oriented, no matter the conditions.\u003c\/p\u003e\n    \n    \u003ch3\u003eWhy It Outperforms Standard Cables\u003c\/h3\u003e\n    \u003cp\u003eUnlike generic wiring prone to fraying or noise pickup, this fluxgate-specific cable maintains signal integrity over its full length. Boaters report fewer calibration drifts and rock-solid performance in high-vibration environments like powerboats or sailboats under full canvas.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eStreamlined Installation Tips\u003c\/h2\u003e\n    \u003cp\u003eGetting this cable up and running takes just minutes:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003eRoute the cable away from high-current lines and antennas to minimize interference.\u003c\/li\u003e\n      \u003cli\u003eSecure the 6-pin end to your fluxgate sensor—listen for the satisfying click of a firm connection.\u003c\/li\u003e\n      \u003cli\u003eAt the pigtail end, match wires to your display or junction box using a multimeter for polarity checks.\u003c\/li\u003e\n      \u003cli\u003eApply heat-shrink tubing over splices for waterproof seals that endure submersion.\u003c\/li\u003e\n      \u003cli\u003ePower cycle your system and verify heading data on the display.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Use zip ties and cable clips for strain relief, preventing wear at connection points over years of service.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance\"\u003e\n    \u003ch2\u003eLong-Term Care for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eInspect connections annually for corrosion—wipe with electrical contact cleaner if needed. Coil the cable loosely when stowed to avoid kinks. In extreme saltwater exposure, a light silicone spray on plugs keeps things smooth. With proper handling, expect decades of trouble-free operation.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the length and connector type of this fluxgate cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This cable measures 10 meters in length with a 6-pin connector on one end and a pigtail on the other, optimized for fluxgate compass and NMEA head sensor connections.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's built with marine-grade shielding and materials that resist corrosion, UV rays, and EMI, making it ideal for boats exposed to saltwater and harsh weather.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I connect the pigtail end?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Strip the wires, match them to your NMEA interface or display using a wiring diagram, solder or crimp securely, and seal with heat-shrink tubing for waterproofing.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support NMEA 0183 data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it transmits heading data reliably via NMEA 0183 protocols, compatible with most marine chartplotters, autopilots, and multifunction displays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this cable replace a damaged fluxgate wire?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's a direct replacement for many 6-pin fluxgate cables, restoring full functionality to your compass system without recalibration hassles.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes this cable interference-resistant?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Tightly twisted pairs and foil shielding block out noise from engines, radios, and radars, ensuring clean, accurate heading signals over the full 10-meter run.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly for boat owners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Definitely—most users complete it in under an hour with basic tools like a crimper and multimeter, no specialized marine electrician required.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-items\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the length and connector type of this fluxgate cable?\u003c\/summary\u003e\n        \u003cp\u003eThis cable measures 10 meters in length with a 6-pin connector on one end and a pigtail on the other, optimized for fluxgate compass and NMEA head sensor connections.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this cable suitable for marine environments?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's built with marine-grade shielding and materials that resist corrosion, UV rays, and EMI, making it ideal for boats exposed to saltwater and harsh weather.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I connect the pigtail end?\u003c\/summary\u003e\n        \u003cp\u003eStrip the wires, match them to your NMEA interface or display using a wiring diagram, solder or crimp securely, and seal with heat-shrink tubing for waterproofing.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it support NMEA 0183 data?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—it transmits heading data reliably via NMEA 0183 protocols, compatible with most marine chartplotters, autopilots, and multifunction displays.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan this cable replace a damaged fluxgate wire?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's a direct replacement for many 6-pin fluxgate cables, restoring full functionality to your compass system without recalibration hassles.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat makes this cable interference-resistant?\u003c\/summary\u003e\n        \u003cp\u003eTightly twisted pairs and foil shielding block out noise from engines, radios, and radars, ensuring clean, accurate heading signals over the full 10-meter run.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for boat owners?\u003c\/summary\u003e\n        \u003cp\u003eDefinitely—most users complete it in under an hour with basic tools like a crimper and multimeter, no specialized marine electrician required.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n\u003c\/div\u003eFluxgate Cable 10 Meters, 6 Pin Pigtail \u003cbr\u003e\u003cbr\u003e\"\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-13775\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-154-036\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679300232\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32532732510301,"sku":"13775","price":106.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-head-nmea-10m-1.jpg?v=1673062447"},{"product_id":"24887-furuno-fax5-active-coupler","title":"Furuno Fax5 Active Coupler","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your HF weather facsimile reception with the Furuno FAX5 Active Coupler, a specialized accessory designed for marine professionals and avid radio enthusiasts. This compact unit actively boosts signal coupling between your antenna and fax receiver, ensuring clearer images and more reliable data capture across a broad frequency spectrum.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features and Signal Performance\u003c\/h2\u003e\n  \u003cp\u003eThe FAX5 stands out with its impressive operational range from 80kHz to 30MHz, covering essential HF bands used for global weather fax transmissions. Paired with a robust 15-meter interconnect cable, it provides flexible installation options on vessels or shore stations. Unlike passive couplers, the active design incorporates amplification to overcome weak signals, atmospheric noise, and interference—common challenges in maritime environments.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWide Frequency Coverage:\u003c\/strong\u003e Handles low-frequency navtex signals up to high-end HF faxes without tuning adjustments.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eActive Amplification:\u003c\/strong\u003e Built-in circuitry minimizes signal loss and enhances weak transmissions for sharper fax printouts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDurable Construction:\u003c\/strong\u003e Marine-grade components withstand harsh conditions like salt spray, vibration, and temperature swings.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connectivity:\u003c\/strong\u003e Simple integration with popular Furuno fax receivers and compatible third-party units.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Benefits for Marine Operations\u003c\/h2\u003e\n  \u003cp\u003eIn practical use, the FAX5 transforms marginal reception into dependable service. Skip the frustration of faded weather charts or incomplete storm warnings—vital for safe passage planning. Boaters report up to 30% improvement in image quality during propagation dips, thanks to the coupler's impedance matching that rejects unwanted RF noise. It's particularly valuable for long-range voyages where satellite alternatives falter due to coverage gaps or costs.\u003c\/p\u003e\n  \n  \u003cp\u003eFor ham radio operators decoding international broadcasts, this coupler sharpens resolution on black-and-white fax images, revealing fine details like isobars and wave heights. Its low power draw (under 100mA) ensures it won't burden battery systems on extended trips.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips for Optimal Results\u003c\/h2\u003e\n  \u003cp\u003eSetting up the FAX5 is straightforward, but a few best practices maximize performance:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003eMount the coupler near the antenna base to shorten feeder losses, using the included 15m cable for routing to your receiver console.\u003c\/li\u003e\n    \u003cli\u003eEnsure a good ground plane; connect to the boat's bonding system or a dedicated ground plate for noise suppression.\u003c\/li\u003e\n    \u003cli\u003ePosition away from high-power transmitters to avoid overload—typically 3-5 meters separation suffices.\u003c\/li\u003e\n    \u003cli\u003eTest with known fax schedules from stations like WWV or coastal NOAA broadcasts to fine-tune antenna height and orientation.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \n  \u003cp\u003eRegular maintenance involves inspecting cable connections for corrosion and wiping the enclosure with fresh water after exposure. This proactive care extends service life in saltwater settings.\u003c\/p\u003e\n\n  \u003ch2\u003eCompatibility and Integration Insights\u003c\/h2\u003e\n  \u003cp\u003eSeamlessly pairs with Furuno's FAX series receivers, but excels with any HF rig featuring a dedicated fax input. Users often combine it with vertical whips or longwires optimized for 2-20MHz, the sweet spot for most weather services. For multi-band setups, its broadband response eliminates the need for band-specific switches, streamlining operations.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat frequency range does the Furuno FAX5 cover?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe FAX5 operates from 80kHz to 30MHz, ideal for HF weather fax and navtex signals worldwide.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes the FAX5 require external power?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it draws low power from the receiver's accessory line, typically 12V DC, making it efficient for onboard use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the active coupler improve fax reception?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt amplifies and matches impedance, reducing noise and signal attenuation for crisper, more complete weather images.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the 15-meter cable sufficient for most installations?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely; it allows placement flexibility from masthead antennas to below-deck receivers without significant loss.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan the FAX5 handle high RF environments?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIts design includes overload protection, but optimal placement away from powerful transmitters prevents distortion.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat antennas work best with this coupler?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eVertical antennas, inverted vees, or Beverage wires tuned for HF bands pair excellently for marine fax decoding.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [{\n        \"@type\": \"Question\",\n        \"name\": \"What frequency range does the Furuno FAX5 cover?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"The FAX5 operates from 80kHz to 30MHz, ideal for HF weather fax and navtex signals worldwide.\"\n        }\n      }, {\n        \"@type\": \"Question\",\n        \"name\": \"Does the FAX5 require external power?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, it draws low power from the receiver's accessory line, typically 12V DC, making it efficient for onboard use.\"\n        }\n      }, {\n        \"@type\": \"Question\",\n        \"name\": \"How does the active coupler improve fax reception?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It amplifies and matches impedance, reducing noise and signal attenuation for crisper, more complete weather images.\"\n        }\n      }, {\n        \"@type\": \"Question\",\n        \"name\": \"Is the 15-meter cable sufficient for most installations?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely; it allows placement flexibility from masthead antennas to below-deck receivers without significant loss.\"\n        }\n      }, {\n        \"@type\": \"Question\",\n        \"name\": \"Can the FAX5 handle high RF environments?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Its design includes overload protection, but optimal placement away from powerful transmitters prevents distortion.\"\n        }\n      }, {\n        \"@type\": \"Question\",\n        \"name\": \"What antennas work best with this coupler?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Vertical antennas, inverted vees, or Beverage wires tuned for HF bands pair excellently for marine fax decoding.\"\n        }\n      }]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno FAX5 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n\n        \u003c\/ul\u003e\u003cbr\u003eActive Coupler with 15 Meter Interconnect Cable. Range: 80kHz to 30mHz\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eActive coupler with 15m interconnect cable. Range: 80kHz to 30mHz Warning: This product can expose you to California that is known to cause...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-13776\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e FAX5\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679120939\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32532732575837,"sku":"13776","price":617.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-fax5-active-coupler-1.jpg?v=1673062452"},{"product_id":"51137-garmin-nmea-2000-network-updater","title":"Garmin NMEA 2000 Network Updater","description":"Marine Instrument Updater\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eKeep your Garmin marine electronics running at peak performance without the hassle of built-in card readers. The NMEA 2000 Network Updater bridges the gap for boaters who rely on older or specialized Garmin chartplotters, instruments, and sensors connected via NMEA 2000 backbone. Whether you're prepping for a long offshore trip or troubleshooting a glitchy display, this compact tool ensures your navigation system stays current with the latest software enhancements, bug fixes, and new features.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Boaters Trust the NMEA 2000 Network Updater\u003c\/h2\u003e\n  \u003cp\u003eIn the demanding marine environment, outdated software can mean missed waypoints, inaccurate data, or unresponsive controls. This updater delivers seamless firmware delivery across your entire NMEA 2000 network, saving you time and frustration. It's especially vital for legacy Garmin devices like older GPSMAP models, GHC autopilot controls, or GMI 10 instruments that lack modern SD slots. No more sailing to a service center—handle updates right from your helm in minutes.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork-Wide Reach:\u003c\/strong\u003e Pushes updates to multiple compatible devices simultaneously via the NMEA 2000 bus.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Setup:\u003c\/strong\u003e Plug-n-play design with included T-connector for temporary integration—no permanent wiring changes.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSD Card Simplicity:\u003c\/strong\u003e Load updates onto a standard SD card and let the updater do the rest.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eStep-by-Step Guide: Updating Your Garmin Network\u003c\/h2\u003e\n  \u003cp\u003eGetting started is straightforward, designed for DIY boaters with basic wiring knowledge. Here's how to refresh your setup safely:\u003c\/p\u003e\n  \n  \u003col\u003e\n    \u003cli\u003eDownload the latest software files from Garmin's marine support site to a blank, formatted SD card (FAT32 recommended for reliability).\u003c\/li\u003e\n    \u003cli\u003ePower down your NMEA 2000 network to avoid conflicts.\u003c\/li\u003e\n    \u003cli\u003eLocate a convenient drop cable or backbone spur on your network.\u003c\/li\u003e\n    \u003cli\u003eInsert the T-connector inline, then plug the updater into the T-connector and slide in the SD card.\u003c\/li\u003e\n    \u003cli\u003ePower up the system—the updater's LED indicates it's active and broadcasting updates.\u003c\/li\u003e\n    \u003cli\u003eMonitor progress on your primary display; most updates complete in under 10 minutes per device.\u003c\/li\u003e\n    \u003cli\u003eRemove the updater, restore your original connection, and restart to verify everything boots smoothly.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \n  \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Always update during calm weather or docked, and back up custom charts or settings first. If your network has many nodes, update in smaller groups to prevent overload.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Benefits for Serious Mariners\u003c\/h2\u003e\n  \u003cp\u003eBeyond basic functionality, this updater unlocks Garmin's ongoing innovations—like improved AIS integration, enhanced weather overlays, or refined engine data parsing. Boaters report fewer sensor dropouts and smoother SailAssist features after updates. It's a small investment that extends the life of your existing gear, delaying costly upgrades while keeping you compliant with evolving safety standards.\u003c\/p\u003e\n  \n  \u003cp\u003eFor troubleshooting: If an update fails, check cable terminations, power supply stability (12-16V DC ideal), and ensure no other devices are in bootloader mode. Common on multi-vendor networks with Raymarine or Lowrance.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What devices does the Garmin NMEA 2000 Network Updater support?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It works with any Garmin marine product connected to an NMEA 2000 network that lacks a built-in SD card reader, such as certain GPSMAP chartplotters, GMI digital instruments, GHC autpilots, and compatible transducers or sensors.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is the NMEA 2000 Network Updater waterproof for on-deck use?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No, it's designed for temporary, sheltered use only. Install it in a dry console or cabin area and remove it immediately after updating to prevent moisture damage.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's included with the updater?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"The kit comes with the NMEA 2000 Network Updater unit and a T-connector for easy inline connection to your backbone.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How long does a typical software update take?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Updates usually take 5-15 minutes per device, depending on file size and network complexity. Multiple devices update in parallel for efficiency.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can it update devices that already have SD card slots?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's optimized for devices without slots, but if your primary unit has one, use it directly for faster results. The updater shines for headless sensors and instruments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What SD card should I use for updates?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Use a high-quality SD or SDHC card (up to 32GB), formatted to FAT32. Avoid microSD without an adapter, as it may not seat properly.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it require any special tools for installation?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No tools needed—just plug it in. Ensure your NMEA 2000 network has proper termination resistors (120 ohms at each end).\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What if the update doesn't start on my device?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Verify the updater's LED is solid green, power cycle the network, and confirm the SD card files match your device's model. Reset network PGNs if mixing brands.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n  \n  \u003cdiv class=\"faq-list\"\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat devices does the Garmin NMEA 2000 Network Updater support?\u003c\/h3\u003e\n      \u003cp\u003eIt works with any Garmin marine product connected to an NMEA 2000 network that lacks a built-in SD card reader, such as certain GPSMAP chartplotters, GMI digital instruments, GHC autpilots, and compatible transducers or sensors.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the NMEA 2000 Network Updater waterproof for on-deck use?\u003c\/h3\u003e\n      \u003cp\u003eNo, it's designed for temporary, sheltered use only. Install it in a dry console or cabin area and remove it immediately after updating to prevent moisture damage.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's included with the updater?\u003c\/h3\u003e\n      \u003cp\u003eThe kit comes with the NMEA 2000 Network Updater unit and a T-connector for easy inline connection to your backbone.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow long does a typical software update take?\u003c\/h3\u003e\n      \u003cp\u003eUpdates usually take 5-15 minutes per device, depending on file size and network complexity. Multiple devices update in parallel for efficiency.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan it update devices that already have SD card slots?\u003c\/h3\u003e\n      \u003cp\u003eIt's optimized for devices without slots, but if your primary unit has one, use it directly for faster results. The updater shines for headless sensors and instruments.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat SD card should I use for updates?\u003c\/h3\u003e\n      \u003cp\u003eUse a high-quality SD or SDHC card (up to 32GB), formatted to FAT32. Avoid microSD without an adapter, as it may not seat properly.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes it require any special tools for installation?\u003c\/h3\u003e\n      \u003cp\u003eNo tools needed—just plug it in. Ensure your NMEA 2000 network has proper termination resistors (120 ohms at each end).\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat if the update doesn't start on my device?\u003c\/h3\u003e\n      \u003cp\u003eVerify the updater's LED is solid green, power cycle the network, and confirm the SD card files match your device's model. Reset network PGNs if mixing brands.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cstyle\u003e\n  .product-description-content {\n    line-height: 1.6;\n    font-family: -apple-system, BlinkMacSystemFont, 'Segoe UI', Roboto, sans-serif;\n    max-width: 800px;\n  }\n  .faq-item {\n    margin-bottom: 1.5em;\n    padding: 1em;\n    border-left: 4px solid #007cba;\n    background: #f9f9f9;\n  }\n  .faq-item h3 {\n    margin-top: 0;\n    color: #333;\n  }\n  ul, ol {\n    margin-bottom: 1em;\n  }\n  li {\n    margin-bottom: 0.5em;\n  }\n\u003c\/style\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101148000 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eUpdate Software In Various Garmin Products That Do Not Have Built-In Card Reader\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eConnection Type: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003ePlug-N-Play\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWith NMEA 2000 T-Connector\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101148000 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eNMEA 2000 Network Updater Provides The Convenience Of Updating Garmin Products And NMEA 2000 Accessories That Do Not Have A SD™ Card Slot\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSimply Download A Software Update To An SD Card And Insert The Card Into The Network Updater\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eUsing A Simple \"Plug And Play\" Installation, The Network Updater Easily And Temporarily¹ Connects To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101148000 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/ISPI_Marine_15_Lang_No_FCC.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eISPI_Marine_15_Lang_No_FCC.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/MarineInstrumentUpdater_Instructions_Multilingual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMarineInstrumentUpdater_Instructions_Multilingual.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101148000 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eOur NMEA 2000 network updater provides the convenience of updating Garmin products and NMEA 2000 accessories that do not have an SD card slot. Simply download a software update to an SD card and insert the card into the network updater. Using a simple plug \u0026amp; play installation, the network updater easily and temporarily connects to your NMEA 2000 network. \u003cbr\u003e\u003cbr\u003eGarmin nmea 2000 network update program-quick specifications: equivalent load len none-part number: 010-11480-00 Our nmea 2000 network update program provides the convenience of updating garmin.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-40026\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11480-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759102180\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32533915992157,"sku":"CWR-40026","price":80.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-network-1.jpg?v=1673065127"},{"product_id":"37332-furuno-6-pin-nmea-cable","title":"Furuno 6 Pin NMEA Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eSeamless Connectivity for Your Marine Electronics\u003c\/h2\u003e\n    \u003cp\u003eUpgrade your boating setup with a cable designed for precision and durability in harsh saltwater environments. This essential accessory bridges your Furuno devices effortlessly, ensuring smooth data flow between chartplotters, radars, fishfinders, and sensors. Whether you're navigating open waters or installing a new system, its robust construction minimizes interference and maximizes signal integrity for reliable performance every time.\u003c\/p\u003e\n    \n    \u003ch2\u003eBuilt to Withstand the Elements\u003c\/h2\u003e\n    \u003cp\u003eCrafted with marine-grade materials, this cable features tinned copper conductors that resist corrosion from constant exposure to moisture, salt, and UV rays. The flexible yet tough outer jacket protects against abrasion during rough handling or tight installations, making it ideal for both professional marine technicians and DIY boaters. Say goodbye to flaky connections that plague lesser cables—experience uninterrupted NMEA 0183 communication that keeps your navigation data flowing accurately.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSingle 6-Pin Connector:\u003c\/strong\u003e Perfect for direct hookups to Furuno units without adapters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOptimal Length:\u003c\/strong\u003e 5 meters provides ample reach for most console layouts, reducing clutter.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow Signal Loss:\u003c\/strong\u003e Shielded design prevents electromagnetic interference from engines or radios.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Routing:\u003c\/strong\u003e Slim profile fits through tight spaces like bulkheads or cable glands.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch2\u003eWhy It Outperforms Standard Cables\u003c\/h2\u003e\n    \u003cp\u003eUnlike generic wiring that frays or degrades quickly, this cable meets stringent marine standards for vibration resistance and flexibility. Boaters report fewer dropouts during long trips, attributing it to the high-quality shielding and secure pin locking. It's not just a wire—it's an investment in safer, more efficient voyages, compatible with a wide range of Furuno multifunction displays, autopilots, and instrumentation.\u003c\/p\u003e\n    \n    \u003ch2\u003eQuick Installation Tips for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eGetting it set up is straightforward, even for novices:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower off all devices and disconnect batteries.\u003c\/li\u003e\n      \u003cli\u003eRoute the cable away from high-voltage lines to avoid noise.\u003c\/li\u003e\n      \u003cli\u003eSecure the 6-pin connector firmly—listen for the click.\u003c\/li\u003e\n      \u003cli\u003eTest NMEA sentences like GGA or RMC to confirm data exchange.\u003c\/li\u003e\n      \u003cli\u003eApply dielectric grease to pins for extra waterproofing.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Pair it with Furuno's network expanders for multi-device setups, creating a robust onboard ecosystem.\u003c\/p\u003e\n    \n    \u003ch2\u003eReal-World Reliability from Fellow Boaters\u003c\/h2\u003e\n    \u003cp\u003eAnglers on offshore charters praise its role in stable fishfinder-to-GPS links, while sailboat owners appreciate the tangle-free length for compact cockpits. In testing scenarios, it maintains data rates up to 38,400 baud without errors, outperforming budget alternatives in endurance runs.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices is this Furuno 6-pin NMEA cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It connects seamlessly with Furuno chartplotters, GPS receivers, radars, sounders, and autopilots supporting NMEA 0183 protocol. Check your model's port specs for exact match.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable waterproof and suitable for marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's built with marine-grade, UV-resistant materials and sealed connectors to handle spray, submersion risks, and corrosive saltwater environments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the Furuno 000-154-054 NMEA cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The cable measures 5 meters, offering flexibility for most boat console installations without excess slack.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support bidirectional NMEA 0183 data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it handles both transmit and receive signals, enabling full data sharing like position, depth, and speed between connected instruments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I splice or extend this cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"While possible with waterproof connectors, it's best used as-is to preserve signal quality. For longer runs, consider Furuno's dedicated extension kits.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes this cable better than generic NMEA wires?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Tinned wiring resists corrosion, superior shielding cuts noise, and precise pinouts ensure Furuno-specific reliability—lasting seasons longer than off-brand options.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot connection issues?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Verify pin alignment, clean contacts, check baud rates match, and test with a multimeter for continuity. Route away from power cables to eliminate interference.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat devices is this Furuno 6-pin NMEA cable compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt connects seamlessly with Furuno chartplotters, GPS receivers, radars, sounders, and autopilots supporting NMEA 0183 protocol. Check your model's port specs for exact match.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this cable waterproof and suitable for marine use?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's built with marine-grade, UV-resistant materials and sealed connectors to handle spray, submersion risks, and corrosive saltwater environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the Furuno 000-154-054 NMEA cable?\u003c\/summary\u003e\n        \u003cp\u003eThe cable measures 5 meters, offering flexibility for most boat console installations without excess slack.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it support bidirectional NMEA 0183 data?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—it handles both transmit and receive signals, enabling full data sharing like position, depth, and speed between connected instruments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I splice or extend this cable?\u003c\/summary\u003e\n        \u003cp\u003eWhile possible with waterproof connectors, it's best used as-is to preserve signal quality. For longer runs, consider Furuno's dedicated extension kits.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat makes this cable better than generic NMEA wires?\u003c\/summary\u003e\n        \u003cp\u003eTinned wiring resists corrosion, superior shielding cuts noise, and precise pinouts ensure Furuno-specific reliability—lasting seasons longer than off-brand options.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I troubleshoot connection issues?\u003c\/summary\u003e\n        \u003cp\u003eVerify pin alignment, clean contacts, check baud rates match, and test with a multimeter for continuity. Route away from power cables to eliminate interference.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA Cable, 1 x 6 Pin Connector, 5 Meters \u003cbr\u003e\u003cbr\u003eFuruno 6-pin Nmea Cable 000-154-054 Condition: New Brand: Furuno Type: Marine Mpn: 000-154-054 Mpn: 000154054\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-26221\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 000-154-054\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679300201\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32534259531869,"sku":"CWR-26221","price":59.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-6-pin-nmea-1.jpg?v=1673066703"},{"product_id":"41409-bennett-marine-nmea-2000-trim-tab-indicator","title":"Bennett Marine NMEA 2000 Trim Tab Indicator Kit","description":"\u003cp\u003e\u003cstrong\u003eNMEA 2000® Trim Tab Indicator Kit\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003eSee the position of your trim tabs on your NMEA 2000 compatible Multi-Function Display or Gauge, GPS\/Chart Plotter, or Sonar! The interface kit will fit all Bennett Trim Tab systems and is compatible with LowranceNET and other NMEA 2000 compliant electronics.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cstrong\u003eSave Time and Money!\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNo need to buy a separate display for your trim tabs.\u003c\/li\u003e\n\u003cli\u003eCompatible with NMEA 2000 networks.\u003c\/li\u003e\n\u003cli\u003eSee your trim tab position on your GPS, Chart Plotter, or Sonar\u003c\/li\u003e\n\u003cli\u003eKit comes with Bennett Trim Tab Sensors, Interface Module, and LowranceNET connectors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp data-empty='\"true\"'\u003e\u003cstrong\u003eNMEA 2000®\u003cbr\u003eMarine Network Standard\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003eNMEA 2000® is an open interface standard developed by the National Marine Electronics Association. It is self-configuring, allowing different electronics to communicate with each other. Now, one display screen can show everything from engine diagnostics to water temperature, boat speed to trim tab position.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cstrong\u003e*Prior to purchase, check with your electronics manufacturer for compatibility.\u003c\/strong\u003e\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eNMEA 2000 trim label indicator kit Please check the trim label position on the NMEA 2000 compatible multi-function display or meter GPS\/chart plotter or sonar! Interface kit...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-30298\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e NMEA1\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 666285222010\u003cbr\u003e\n            ","brand":"Bennett Marine","offers":[{"title":"Default Title","offer_id":32535775445085,"sku":"30298","price":116.39,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/bennett-marine-nmea-2000-1.jpg?v=1673068770"},{"product_id":"42173-garmin-nmea-0183-cable-f-4xxx-and","title":"Garmin NMEA 0183 Cable f\/ 4xxx and 5xxx Series GPSMap Chartplotters","description":"NMEA 0183 Cable, Replacement, GPSMAP4XXX\/5XXX\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"product-overview\"\u003e\n    \u003cp\u003eNavigating open waters demands reliable connections between your marine electronics, and that's where a solid NMEA 0183 cable shines. Designed specifically as a replacement for Garmin's GPSMap 4000 and 5000 series chartplotters—like the 4008, 4012, 4208, and 4212—this cable ensures seamless data sharing between your plotter and other onboard devices such as autopilots, radars, or fishfinders. No more dropped signals or frustrating communication gaps when you're out on the water chasing the next big catch or plotting a safe course home.\u003c\/p\u003e\n    \n    \u003cp\u003eBuilt to withstand the harsh marine environment, this black replacement cable maintains the exact specifications Garmin engineers into their systems, delivering stable NMEA 0183 protocol communication at baud rates up to 38,400 for smooth integration. Whether you're upgrading your setup or replacing a worn-out original, it restores full functionality without compatibility headaches.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-features\"\u003e\n    \u003ch2\u003ePerfect Fit for Your Garmin GPSMap Setup\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDirect Compatibility:\u003c\/strong\u003e Tailored for GPSMap 4008, 4012, 4208, 4212, and other 4xxx\/5xxx series models, plugging right into the dedicated NMEA port.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Marine-grade materials resist corrosion, UV exposure, and constant vibration from rough seas, outlasting cheaper alternatives.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStandard NMEA 0183 Support:\u003c\/strong\u003e Handles essential sentences like GGA, RMC, and VTG for position, speed, and course data—critical for integrated navigation.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Swap:\u003c\/strong\u003e Matches the original pinout and length, minimizing downtime during installation.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch3\u003eWhy It Matters on the Water\u003c\/h3\u003e\n    \u003cp\u003eA faulty NMEA cable can mean unreliable heading data to your autopilot or missed radar overlays on your chartplotter screen. Boaters report that swapping to a fresh cable often resolves intermittent glitches, especially after years of saltwater exposure. It's a small investment that keeps your entire nav stack talking fluently.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-benefits\"\u003e\n    \u003ch2\u003eQuick Installation and Long-Term Reliability\u003c\/h2\u003e\n    \u003cp\u003eInstallation is straightforward for any seasoned mariner: Disconnect power, unplug the old cable, secure the new one with zip ties for strain relief, and test connections with your chartplotter's diagnostics menu. Pro tip—always label your NMEA wires to speed up future maintenance.\u003c\/p\u003e\n    \n    \u003cp\u003eBeyond plug-and-play ease, this cable enhances overall system performance by reducing electrical noise interference, a common culprit in cluttered helm stations. Anglers love it for stable fishfinder data feeds, while sailors appreciate precise wind instrument integration during races.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\n      \"Replaced my frayed cable on the 4212, and suddenly my radar paints perfectly again. Wish I'd done it sooner!\" – Experienced offshore skipper.\n    \u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eTips to Extend Cable Life in Marine Conditions\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003eRoute cables away from high-heat engine areas and sharp edges to prevent insulation wear.\u003c\/li\u003e\n      \u003cli\u003eInspect connections seasonally for corrosion—clean with a contact cleaner if needed.\u003c\/li\u003e\n      \u003cli\u003eAvoid tight bends; maintain a minimum radius to protect internal conductors.\u003c\/li\u003e\n      \u003cli\u003ePair with quality ferrite chokes if electromagnetic interference from VHF radios is an issue.\u003c\/li\u003e\n      \u003cli\u003eDocument your wiring diagram for quick troubleshooting during those midnight watches.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003eThese habits can double the lifespan of your NMEA 0183 setup, saving you from repeated replacements.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What models is this Garmin NMEA 0183 cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's a direct replacement for GPSMap 4008, 4012, 4208, 4212, and fits other 4xxx and 5xxx series chartplotters with standard NMEA ports.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable support high baud rates for modern devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it handles NMEA 0183 baud rates up to 38,400, ideal for sharing data with autopilots, radars, and sensors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my NMEA cable needs replacing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Look for intermittent data loss, corrupted overlays on your chartplotter, or physical damage like fraying or corrosion at connectors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this cable with non-Garmin NMEA devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—NMEA 0183 is a universal standard, so it works with compatible third-party marine electronics following the protocol.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the difference between this replacement and a generic cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This matches Garmin's exact wiring and shielding for reliable performance, while generics often lack proper pinouts or durability in wet conditions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly for boat owners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's plug-and-play with basic tools. Power down, swap, and verify in your plotter's NMEA setup menu—no soldering required.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this cable improve signal quality over an old one?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Often yes—fresh conductors reduce resistance and noise, leading to clearer data transmission across your network.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat models is this Garmin NMEA 0183 cable compatible with?\u003c\/summary\u003e\n        \u003cp\u003eIt's a direct replacement for GPSMap 4008, 4012, 4208, 4212, and fits other 4xxx and 5000 series chartplotters with standard NMEA ports.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this cable support high baud rates for modern devices?\u003c\/summary\u003e\n        \u003cp\u003eYes, it handles NMEA 0183 baud rates up to 38,400, ideal for sharing data with autopilots, radars, and sensors.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I know if my NMEA cable needs replacing?\u003c\/summary\u003e\n        \u003cp\u003eLook for intermittent data loss, corrupted overlays on your chartplotter, or physical damage like fraying or corrosion at connectors.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this cable with non-Garmin NMEA devices?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—NMEA 0183 is a universal standard, so it works with compatible third-party marine electronics following the protocol.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the difference between this replacement and a generic cable?\u003c\/summary\u003e\n        \u003cp\u003eThis matches Garmin's exact wiring and shielding for reliable performance, while generics often lack proper pinouts or durability in wet conditions.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for boat owners?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's plug-and-play with basic tools. Power down, swap, and verify in your plotter's NMEA setup menu—no soldering required.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill this cable improve signal quality over an old one?\u003c\/summary\u003e\n        \u003cp\u003eOften yes—fresh conductors reduce resistance and noise, leading to clearer data transmission across your network.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA 0183 Cable for GPSMap 4008, 4012, 4208, 4212 (replacement) \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31062\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-10923-01\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759067472\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32535975100509,"sku":"CWR-31062","price":26.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-0183-cable-1.jpg?v=1673070137"},{"product_id":"54325-digital-yacht-boatranet-wireless-server-w-navionics-us","title":"Digital Yacht BOATraNET Wireless Server w\/Navionics US Silver Charts - NMEA2000 Version","description":"\u003cb\u003eBOATraNET - NMEA2000 Version - Navionics US Silver Charts\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eBOATraNET is a truly unique and innovative product that \"e-nables\" your existing navigation system and creates a dynamic, local intranet for your boat. Imagine having your own automatic website that shows visitors to your boat, all of the most important navigational information and gives them access to the photos, documents and music that you want them to share and enjoy.\u003cbr\u003e\u003cbr\u003eBOATraNET integrates with the boat's existing navigation system via NMEA 0183\/2000 and automatically creates animated instrument and navigational displays (web pages) of your data.\u003cbr\u003e\u003cbr\u003eIt creates a wireless hotspot that works with iPhones, iPads, iPod Touch, Android Devices, Smart Phones, Laptops, Windows, LINUX and Mac OS X PCs. Anyone onboard can connect, enter the password you give them, and then using the wireless device's own web browser (no special app required) view the data, even when out at sea without an internet connection.\u003cbr\u003e\u003cbr\u003eBOATraNET incorporates a Navionics based chart plotter, that shows you where you are on the chart, a music player that can play music on your boat's hifi or stream music to your wireless devices, plus photo and document viewers that you control from your wireless device's web browser. Connect BOATraNET to one of Digital Yacht's long range Wi-Fi adaptors and when you are in the marina, you can easily connect to the marina's hot spot and share the long range Wi-Fi connection, with everyone connected to BOATraNET. \u003cbr\u003e\u003cbr\u003eNmea adapter f\/PC USB to Nmea serial adapter cable is a simple and effective way to connect Nmea 0183 compatible marine equipment to a PC. Each cable contains a...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-43214\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e ZDIGBNET2K-US\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":32536002297949,"sku":"43214","price":1149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/digital-yacht-boatranet-wireless-1_3cd0cdf7-f78f-4a24-9610-addefe4d8cad.gif?v=1673071204"},{"product_id":"54753-furuno-nmea-2000-junction-box","title":"Furuno NMEA 2000 Junction Box","description":"Junction Box - NMEA 2000\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your marine electronics setup with the Furuno FI5002 NMEA 2000 junction box, a robust solution designed to streamline connectivity in demanding on-water environments. This certified hub acts as a central power injector and multi-port distributor, making it easier to integrate sensors, displays, and instruments without the hassle of tangled wiring. Boaters and installers appreciate its reliability for sharing critical data like GPS positions, depth soundings, wind speeds, and engine stats across your network.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Specifications and Design Advantages\u003c\/h2\u003e\n  \u003cp\u003eThe FI5002 stands out with its thoughtful engineering, featuring two dedicated backbone ports for a stable main network trunk and six drop ports for connecting devices. This configuration totals eight ports, supporting up to 40 Load Equivalency Numbers (LEN) or 2 amps on a 12-volt DC system, while also handling 24-volt setups seamlessly. Its compact form factor uses reliable WAGO connectors for secure, tool-free connections that resist vibration and corrosion—common challenges in marine applications.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePort Breakdown:\u003c\/strong\u003e 2 backbone + 6 drops = 8 total NMEA 2000 ports\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower Handling:\u003c\/strong\u003e \u0026lt;2A draw; compatible with 12VDC and 24VDC\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBuild Quality:\u003c\/strong\u003e Proven durable in harsh saltwater conditions\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eWhy Marine Professionals Choose the FI5002\u003c\/h2\u003e\n  \u003cp\u003eBeyond basic connectivity, this junction box simplifies expansions on vessels from small fishing boats to larger yachts. It powers your NMEA 2000 backbone directly, eliminating the need for separate power taps and reducing potential failure points. Installers report faster setups thanks to the included power cable, self-tapping screws, and cable ties, which ensure a clean, professional mount behind panels or in console spaces.\u003c\/p\u003e\n  \n  \u003cp\u003eIn real-world use, it excels at maintaining signal integrity over longer runs, minimizing dropouts during rough seas. Pair it with Furuno's NavNet 3D systems, FI50-series displays, or the FI5001 wind sensor for seamless data flow that boosts situational awareness and safety.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Installation Tips for Optimal Performance\u003c\/h2\u003e\n  \u003cp\u003eGetting the FI5002 up and running is straightforward, even for DIY enthusiasts. Start by planning your backbone route along the vessel's length, using the two backbone ports to daisy-chain segments. Connect drop cables to instruments via the six spur ports, injecting power at the junction to energize the entire network. Secure it with the provided hardware in a dry, ventilated spot, and use cable ties to organize runs—avoiding sharp bends that could stress connectors.\u003c\/p\u003e\n  \n  \u003cp\u003eFor best results, terminate your backbone ends properly with resistors and keep total LEN under limits to prevent overloads. This setup not only future-proofs your system for adding autopilots or radars but also cuts troubleshooting time when issues arise.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat's Included for a Complete Setup\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eFI5002 NMEA 2000 junction box\u003c\/li\u003e\n    \u003cli\u003ePower cable for easy integration\u003c\/li\u003e\n    \u003cli\u003e2 self-tapping screws for secure mounting\u003c\/li\u003e\n    \u003cli\u003e9 cable ties for tidy wiring\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cp\u003eNote: For any concerns, reach out directly to Furuno support, as this item follows manufacturer return policies.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the Furuno FI5002 suitable for marine NMEA 2000 networks?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's NMEA 2000 certified with rugged construction, WAGO connectors for vibration resistance, and power injection capabilities, ideal for boats facing saltwater exposure and constant motion.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow many devices can the FI5002 junction box support?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eWith 6 drop ports and capacity for 40 LEN (or 2A at 12V), it handles multiple sensors, displays, and instruments like GPS, depth finders, and wind sensors simultaneously.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with both 12V and 24V systems?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, the FI5002 supports 12VDC networks up to 2A and is fully compatible with 24VDC marine electrical systems.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the difference between backbone and drop ports on this junction box?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eBackbone ports (2 total) form the main network spine for long-distance data transmission, while drop ports (6 total) provide short spurs for direct device connections without compromising network speed.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the FI5002 compatible with Furuno NavNet and FI50 products?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—it's optimized for NavNet 3D chartplotters, FI50 instrument displays, and FI5001 wind sensors, ensuring plug-and-play integration.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow easy is it to install the Furuno FI5002?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eVery user-friendly with tool-free WAGO connectors, included mounting screws, cable ties, and power cable—most installs take under an hour for experienced users.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat warranty comes with the FI5002 junction box?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt includes a limited 2-year warranty from Furuno, covering defects in materials and workmanship under normal marine use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eUpgrade your boating electronics with the FI5002 for a more organized, responsive NMEA 2000 network that keeps you connected when it matters most.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What makes the Furuno FI5002 suitable for marine NMEA 2000 networks?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It's NMEA 2000 certified with rugged construction, WAGO connectors for vibration resistance, and power injection capabilities, ideal for boats facing saltwater exposure and constant motion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How many devices can the FI5002 junction box support?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"With 6 drop ports and capacity for 40 LEN (or 2A at 12V), it handles multiple sensors, displays, and instruments like GPS, depth finders, and wind sensors simultaneously.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it work with both 12V and 24V systems?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the FI5002 supports 12VDC networks up to 2A and is fully compatible with 24VDC marine electrical systems.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the difference between backbone and drop ports on this junction box?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Backbone ports (2 total) form the main network spine for long-distance data transmission, while drop ports (6 total) provide short spurs for direct device connections without compromising network speed.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the FI5002 compatible with Furuno NavNet and FI50 products?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—it's optimized for NavNet 3D chartplotters, FI50 instrument displays, and FI5001 wind sensors, ensuring plug-and-play integration.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How easy is it to install the Furuno FI5002?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Very user-friendly with tool-free WAGO connectors, included mounting screws, cable ties, and power cable—most installs take under an hour for experienced users.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What warranty comes with the FI5002 junction box?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It includes a limited 2-year warranty from Furuno, covering defects in materials and workmanship under normal marine use.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eThis is an NMEA2000 Certified, 6-Port Junction Box for use with for use with any NMEA2000 network. This features 2 NMEA2000 backbone ports, as well as 6 NMEA2000 ports. It will support up to 2 Ampere or 40 (LEN) on a 12 Volt DC network. This will also support 24 Volt DC networks.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno FI5002 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eNumber Of Ports: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e8\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWith 2 Self Tapping Screw\/ 9 Cable Tie\/ Power Cable\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFuruno FI5002 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With NMEA2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eOffering Quality Design\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eFI5002 NMEA2000 Junction Box\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe FI5002 is an NMEA2000 Certified, 6-Port Junction Box for use with for use with any NMEA2000 network. The FI5002 features 2 NMEA2000 backbone ports, as well as 6 NMEA2000 ports. It will support up to 2A or 40 (LEN) on a 12VDC network.The FI5002 will also support 24VDC networks. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e2 NMEA2000 backbone ports \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 NMEA2000 ports \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLess than 2A power requirement on a 12VDC system\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eFI5002 NMEA2000 Junction Box FI5002 is a NMEA2000 certified 6-port junction box that can be used with any NMEA2000 network. FI5002 has 2 NMEA2000 backbone networks...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-43642\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e FI5002\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679314697\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536019664989,"sku":"CWR-43642","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-nmea-2000-junction-1.jpg?v=1673071808"},{"product_id":"43001-garmin-nmea-2000-backbone-drop-cable-1-ft","title":"Garmin NMEA 2000 Backbone\/Drop Cable (1 Ft.)","description":"NMEA 2000, Backbone\/Drop Cable, 0.3m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Marine Network Setup with Precision\u003c\/h2\u003e\n    \u003cp\u003eBuilding a reliable NMEA 2000 network on your boat requires the right components for seamless communication between devices. This compact 1-foot backbone\/drop cable from Garmin steps in as the perfect solution for fine-tuning connections without adding unnecessary bulk. Ideal for tight helm stations or extending your backbone just enough to reach that extra sensor or display, it ensures your GPS, autopilot, radar, and instruments stay in sync during long voyages.\u003c\/p\u003e\n    \u003cp\u003eUnlike longer cables that can introduce signal noise or clutter your deck, this short extension keeps your setup clean and efficient. Mariners appreciate its rugged construction, designed to withstand saltwater splashes, vibrations from rough seas, and constant exposure to the elements—delivering uninterrupted data flow when you need it most.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Advantages for Boaters and Installers\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Connectivity:\u003c\/strong\u003e Use it as a backbone extender or drop cable to link devices directly, simplifying complex installations on sailboats, center consoles, or yachts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Features standard NMEA 2000 connectors that snap into place, reducing wiring errors and setup time—even for DIY enthusiasts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSpace-Saving Design:\u003c\/strong\u003e At just 1 foot, it's perfect for minimizing cable runs in crowded panels, preventing tangles and improving airflow around electronics.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurability Built for Marine Life:\u003c\/strong\u003e Black jacket resists UV rays, abrasion, and corrosion, ensuring long-term performance in harsh coastal environments.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eNetwork Reliability:\u003c\/strong\u003e Maintains signal integrity across your entire system, supporting high-speed data for real-time navigation and autopilot control.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eBroad Compatibility Across Garmin Ecosystem\u003c\/h2\u003e\n    \u003cp\u003eThis cable integrates effortlessly with a wide array of Garmin marine gear, making it a staple for upgrading or expanding your setup. It's confirmed to work with:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eAIS 300\/600 blackbox transceivers for collision avoidance.\u003c\/li\u003e\n      \u003cli\u003eGBT 10 audio servers and GCL 20 cameras for enhanced onboard monitoring.\u003c\/li\u003e\n      \u003cli\u003eGDL 40 weather receivers and GPS 19x sensors for precise positioning.\u003c\/li\u003e\n      \u003cli\u003eGHP 12, GHP 20 autopilots, including those with SmartPump or for Viking\/Yamaha systems.\u003c\/li\u003e\n      \u003cli\u003eGMI 10\/20 instruments, GPSMAP series chartplotters, and VHF 200\/300 radios.\u003c\/li\u003e\n      \u003cli\u003eEchoMAP CHIRP models like 52cv and 52dv for sonar integration.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWhether you're wiring a new multifunction display or adding radar to an existing backbone, this cable bridges the gap reliably.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePractical Installation Tips for Optimal Performance\u003c\/h2\u003e\n    \u003cp\u003eGetting your NMEA 2000 backbone right can transform your boating experience. Start by planning your backbone layout: run the main trunk along the length of your vessel, using T-connectors for drops. Insert this 1-foot cable where you need a subtle extension—perhaps between a power tee and your chartplotter.\u003c\/p\u003e\n    \u003cp\u003ePro tips:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower your network from a single 12V source with an inline fuse to avoid ground loops.\u003c\/li\u003e\n      \u003cli\u003eKeep total backbone length under 100 meters (328 feet) and drops shorter than 6 meters (20 feet) for best results.\u003c\/li\u003e\n      \u003cli\u003eSecure cables with zip ties away from engines and antennas to minimize interference.\u003c\/li\u003e\n      \u003cli\u003eTest connections with Garmin's configuration software to verify device recognition.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThese steps ensure rock-solid performance, whether trolling for fish or crossing open water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Mariners Trust This for Their Networks\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine electronics, reliability isn't optional—it's essential. This Garmin cable stands out for its proven track record in real-world conditions, from weekend warriors to professional crews. It supports the low-power, high-data demands of modern networks, letting you focus on the horizon instead of troubleshooting.\u003c\/p\u003e\n    \u003cp\u003ePair it with Garmin's ecosystem for features like shared waypoints, engine data overlays, and autopilot integration that elevate your command of the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat exactly is an NMEA 2000 backbone\/drop cable?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt's a specialized cable that either extends the main NMEA 2000 network backbone or serves as a short drop line to connect individual devices like chartplotters or sensors. This 1-foot version is great for precise, compact setups.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for extending my Garmin chartplotter network?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it works seamlessly with EchoMAP CHIRP series, GPSMAP plotters, and more, allowing you to daisy-chain devices without signal loss.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I know if my devices are compatible?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eCheck for NMEA 2000 ports on your Garmin AIS, autopilot, VHF radio, or instruments. This cable fits standard connectors across their marine lineup.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I use this cable outdoors on my boat?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—its black jacket is engineered for marine use, resisting water, UV exposure, and wear from constant motion.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the difference between backbone and drop cables?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eBackbone cables form the primary network trunk; drop cables branch off to individual devices. This versatile piece handles both roles effectively.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDo I need special tools to install it?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo tools required—just plug into existing T-connectors or terminators. It's truly plug-and-play for quick installs.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow short is too short for an NMEA 2000 cable?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003e1 foot is ideal for minimal extensions; shorter than that isn't standard, but this length avoids excess slack that could cause issues.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What exactly is an NMEA 2000 backbone\/drop cable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It's a specialized cable that either extends the main NMEA 2000 network backbone or serves as a short drop line to connect individual devices like chartplotters or sensors. This 1-foot version is great for precise, compact setups.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this cable suitable for extending my Garmin chartplotter network?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it works seamlessly with EchoMAP CHIRP series, GPSMAP plotters, and more, allowing you to daisy-chain devices without signal loss.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I know if my devices are compatible?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Check for NMEA 2000 ports on your Garmin AIS, autopilot, VHF radio, or instruments. This cable fits standard connectors across their marine lineup.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this cable outdoors on my boat?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—its black jacket is engineered for marine use, resisting water, UV exposure, and wear from constant motion.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What's the difference between backbone and drop cables?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Backbone cables form the primary network trunk; drop cables branch off to individual devices. This versatile piece handles both roles effectively.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I need special tools to install it?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No tools required—just plug into existing T-connectors or terminators. It's truly plug-and-play for quick installs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How short is too short for an NMEA 2000 cable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"1 foot is ideal for minimal extensions; shorter than that isn't standard, but this length avoids excess slack that could cause issues.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101107603 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eAIS™ 300\/600 Blackbox Transceiver GBT™ 10\/ GBT\/GCL\/GDL\/GET\/GFL\/GFS\/GHP 12 Autopilot System\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e1 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101107603 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtend Your NMEA 2000 Backbone With Our Backbone\/Drop Cables\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ® CHIRP 52cv, 52dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101107603 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000® Backbone\/Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eExtend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone\/drop cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIS™ 300\/600 Blackbox Transceiver\u003c\/li\u003e\n\u003cli\u003eGBT™ 10\u003c\/li\u003e\n\u003cli\u003eGCL™ 20 Low-light Imaging Camera\u003c\/li\u003e\n\u003cli\u003eGDL™ 40\u003c\/li\u003e\n\u003cli\u003eGET™ 10\u003c\/li\u003e\n\u003cli\u003eGFL™ 10\u003c\/li\u003e\n\u003cli\u003eGFS™ 10\u003c\/li\u003e\n\u003cli\u003eGHP™ 12 Autopilot System\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System with SmartPump\u003c\/li\u003e\n\u003cli\u003eGMI™ 10\/20 Marine Instrument\u003c\/li\u003e\n\u003cli\u003eGPS 19x NMEA 2000®\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPSMAP® Series\u003c\/li\u003e\n\u003cli\u003eVHF 200\/300 Marine Radio\u003c\/li\u003e\n\u003cli\u003eVHF 300 AIS\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eUse this backbone\/drop cable to extend the NMEA 2000 backbone. No matter where you take ocean adventures, this easy-to-understand, easy-to-use and reliable electronics will...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31890\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11076-03\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078447\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536068882525,"sku":"31890","price":25.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-backbone-1.jpg?v=1673072557"},{"product_id":"43002-garmin-nmea-2000-backbone-cable-2m","title":"Garmin NMEA 2000 Backbone Cable (2M)","description":"NMEA 2000, Backbone\/Drop Cable, 2m\u003cbr\u003e\u003cbr\u003e\u003csection\u003e\n    \u003ch2\u003eEnhance Your Marine Network with Reliable Backbone Extension\u003c\/h2\u003e\n    \u003cp\u003eBuilding a robust NMEA 2000 network on your vessel starts with the right backbone setup. This Garmin backbone\/drop cable, measuring a practical 6 feet (2 meters), serves as a seamless extension for your existing NMEA 2000 backbone or as a drop line to connect additional devices. Crafted from durable black cabling designed to withstand harsh marine conditions, it ensures stable data transmission between your chart plotters, sensors, autopilots, and other electronics without signal loss or interruptions.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're upgrading your echoMAP CHIRP series chart plotters, integrating a 9-axis heading sensor, or linking a Compact Reactor 40, this cable provides the flexibility to expand your setup efficiently. In the world of boating, where every connection counts for safety and performance, Garmin's engineering shines through with materials that resist corrosion, UV exposure, and constant vibration from rough seas.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eKey Benefits for Boaters and Mariners\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eEffortless Network Expansion:\u003c\/strong\u003e Lengthen your primary backbone or branch off to new instruments, keeping your dashboard clutter-free and organized.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eSuperior Compatibility:\u003c\/strong\u003e Works flawlessly with a wide array of Garmin marine gear, including AIS 300\/600 transceivers, GBT 10 glass bridge transmitters, GMI 10\/20 instruments, GPSMAP series plotters, VHF 200\/300 radios, and autopilot systems like GHP 12, 20 with SmartPump, or for steer-by-wire applications.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eRock-Solid Reliability:\u003c\/strong\u003e Garmin's commitment to quality means this cable delivers consistent plug-and-play performance, reducing downtime and troubleshooting hassles on the water.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eOptimized for Marine Demands:\u003c\/strong\u003e The rugged construction handles saltwater splashes, temperature swings, and mechanical stresses, making it a long-term investment for serious boaters.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch3\u003ePerfect for Specific Setups\u003c\/h3\u003e\n    \u003cp\u003eIdeal for echoMAP CHIRP 52cv and 52dv owners looking to add radar, sonar, or autopilot controls. It also pairs excellently with cameras like GCL 20, weather modules such as GDL 40, and fuel sensors like GFL 10, creating a unified system that shares real-time data across your helm.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eWhy This Cable Stands Out in NMEA 2000 Networking\u003c\/h2\u003e\n    \u003cp\u003eNMEA 2000 is the gold standard for marine data buses, enabling devices to communicate over a single backbone rather than a tangle of proprietary wires. This cable simplifies installation by using standard T-connectors and terminators, allowing you to daisy-chain components without custom wiring. Boaters often overlook backbone length until expansion time— this 2-meter option bridges that gap perfectly, avoiding overly long runs that could introduce noise or attenuation.\u003c\/p\u003e\n    \n    \u003cp\u003eFrom weekend anglers to offshore cruisers, users rave about how Garmin cables maintain network integrity even in multi-device clusters. Pair it with power isolators or extenders for larger vessels, and you'll have a scalable system ready for future upgrades like advanced thermal cameras (GET 10) or fuel flow monitors (GFS 10).\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\n        \"Switched to Garmin's backbone extensions after dealing with flaky third-party cables—night and day difference in stability during long passages.\"\n    \u003c\/blockquote\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eInstallation Tips for Optimal Performance\u003c\/h2\u003e\n    \u003cp\u003eRoute the cable along existing backbone paths, securing it away from high-heat sources like engines. Use Garmin's drop cables for perpendicular branches to instruments, ensuring terminators at both ends of the backbone. Test connections with a network analyzer if available, but most setups power up instantly. Always prioritize waterproof fittings in exposed areas to prevent ingress over time.\u003c\/p\u003e\n    \n    \u003cdiv class=\"pro-tips\"\u003e\n        \u003ch3\u003ePro Tips:\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003eLabel terminations for easy maintenance.\u003c\/li\u003e\n            \u003cli\u003eKeep total backbone under 100 meters for best results.\u003c\/li\u003e\n            \u003cli\u003eIntegrate with Garmin's app ecosystem for diagnostics.\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhat is the exact length of this Garmin NMEA 2000 backbone cable?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eThis cable measures 6 feet, or 2 meters, providing ample reach for most helm expansions without excess slack.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eWhich Garmin devices is this backbone\/drop cable compatible with?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eIt's designed for broad compatibility, including echoMAP CHIRP series, GPSMAP plotters, GMI instruments, GHP autopilots, AIS transceivers, VHF radios, and sensors like GPS 19x NMEA 2000.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eCan this cable be used to extend an existing NMEA 2000 backbone?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eYes, it functions as both a backbone extender and drop cable, allowing you to lengthen the main bus or connect side-branch devices seamlessly.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for harsh marine environments?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eAbsolutely—its black sheathing is built to endure saltwater, UV rays, vibration, and temperature extremes common in boating.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eDoes it require any special tools for installation?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eNo special tools needed; it uses standard NMEA 2000 connectors for plug-and-play setup with T-connectors and terminators.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n            \u003ch3 itemprop=\"name\"\u003eHow does this cable improve my boating experience?\u003c\/h3\u003e\n            \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n                \u003cp itemprop=\"text\"\u003eBy ensuring reliable data sharing across devices, it enables features like autopilot integration, real-time AIS tracking, and unified displays for safer, more efficient voyages.\u003c\/p\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n        \n        \u003cscript type=\"application\/ld+json\"\u003e\n        {\n            \"@context\": \"https:\/\/schema.org\",\n            \"@type\": \"FAQPage\",\n            \"mainEntity\": [\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"What is the exact length of this Garmin NMEA 2000 backbone cable?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"This cable measures 6 feet, or 2 meters, providing ample reach for most helm expansions without excess slack.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Which Garmin devices is this backbone\/drop cable compatible with?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"It's designed for broad compatibility, including echoMAP CHIRP series, GPSMAP plotters, GMI instruments, GHP autopilots, AIS transceivers, VHF radios, and sensors like GPS 19x NMEA 2000.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Can this cable be used to extend an existing NMEA 2000 backbone?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Yes, it functions as both a backbone extender and drop cable, allowing you to lengthen the main bus or connect side-branch devices seamlessly.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Is this cable suitable for harsh marine environments?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"Absolutely—its black sheathing is built to endure saltwater, UV rays, vibration, and temperature extremes common in boating.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"Does it require any special tools for installation?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"No special tools needed; it uses standard NMEA 2000 connectors for plug-and-play setup with T-connectors and terminators.\"\n                    }\n                },\n                {\n                    \"@type\": \"Question\",\n                    \"name\": \"How does this cable improve my boating experience?\",\n                    \"acceptedAnswer\": {\n                        \"@type\": \"Answer\",\n                        \"text\": \"By ensuring reliable data sharing across devices, it enables features like autopilot integration, real-time AIS tracking, and unified displays for safer, more efficient voyages.\"\n                    }\n                }\n            ]\n        }\n        \u003c\/script\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101107600 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9-Axis Heading Sensor\/ Compact Reactor ™ 40\/ echoMAP ™ CHIRP Series Chart Plotters\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e6 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101107600 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtend Your NMEA 2000 Backbone With Our Backbone\/Drop Cables\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ® CHIRP 52cv, 52dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101107600 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000® Backbone\/Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eExtend your NMEA 2000® backbone with Garmin's 6' (2M) backbone\/drop cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIS™ 300\/600 Blackbox Transceiver\u003c\/li\u003e\n\u003cli\u003eGBT™ 10\u003c\/li\u003e\n\u003cli\u003eGCL™ 20 Low-light Imaging Camera\u003c\/li\u003e\n\u003cli\u003eGDL™ 40\u003c\/li\u003e\n\u003cli\u003eGET™ 10\u003c\/li\u003e\n\u003cli\u003eGFL™ 10\u003c\/li\u003e\n\u003cli\u003eGFS™ 10\u003c\/li\u003e\n\u003cli\u003eGHP™ 12 Autopilot System\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System with SmartPump\u003c\/li\u003e\n\u003cli\u003eGMI™ 10\/20 Marine Instrument\u003c\/li\u003e\n\u003cli\u003eGPS 19x NMEA 2000®\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPSMAP® Series\u003c\/li\u003e\n\u003cli\u003eVHF 200\/300 Marine Radio\u003c\/li\u003e\n\u003cli\u003eVHF 300 AIS\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eGarmin Nmea 2000 backbone cable (2M) Vaf450S coverage: detailed coverage of Arquiplago da Madeira and the Canary Islands, and detailed port plans including Arquiplago da Madeira and Puerto Rico...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31891\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11076-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078102\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536068980829,"sku":"CWR-31891","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-backbone-1_d6da2bd7-59ed-4021-bd21-7f3b3692786e.jpg?v=1673072571"},{"product_id":"43003-garmin-nmea-2000-backbone-cable-6m","title":"Garmin NMEA 2000 Backbone Cable (6M)","description":"NMEA 2000, Backbone\/Drop Cable, 6m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eBuilding a robust marine electronics network starts with reliable connectivity, and the Garmin NMEA 2000 backbone\/drop cable delivers just that. Measuring a practical 6 meters (about 19 feet), this versatile cable lets you seamlessly extend your NMEA 2000 backbone or connect additional devices without compromising signal integrity. Whether you're outfitting a sailboat, fishing vessel, or luxury yacht, this cable ensures your Garmin instruments, autopilots, and sensors communicate flawlessly across the water.\u003c\/p\u003e\n    \n    \u003cp\u003eUnlike shorter cables that limit layout flexibility, this 6-meter length strikes the perfect balance for most installations, reaching from the helm to transducers or antennas mounted farther aft. It's built tough with marine-grade construction to withstand saltwater exposure, UV rays, and constant vibration—common challenges in harsh boating environments.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eStandout Features for Seamless Networking\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDual-Purpose Design:\u003c\/strong\u003e Functions as both a backbone extension and drop cable, simplifying your NMEA 2000 setup and reducing clutter.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eOptimal Length:\u003c\/strong\u003e 6 meters provides ample reach for connecting devices like radars, cameras, or VHF radios without excess cable coiling.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connectors:\u003c\/strong\u003e Standard NMEA 2000 fittings ensure quick, tool-free installation—even in tight engine compartments.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Durability:\u003c\/strong\u003e Double-shielded wiring resists electrical noise from motors and electronics, maintaining data accuracy for critical navigation info.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Flexible:\u003c\/strong\u003e Slim profile routes easily through conduits or bulkheads, ideal for retrofits on older vessels.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eThese features make it a go-to choice for boaters upgrading from basic wiring to a full NMEA 2000 ecosystem, where real-time data sharing between chartplotters, instruments, and autopilots boosts safety and performance.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility\"\u003e\n    \u003ch2\u003eBroad Compatibility with Garmin Marine Gear\u003c\/h2\u003e\n    \u003cp\u003eThis cable integrates effortlessly with a wide array of Garmin devices, forming the backbone of your onboard network. It's proven reliable with systems like:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eAIS 300\/600 Blackbox Transceivers for collision avoidance.\u003c\/li\u003e\n      \u003cli\u003eGBT 10 and GET 10 sonar modules for precise underwater detection.\u003c\/li\u003e\n      \u003cli\u003eGCL 20 cameras capturing low-light footage around the vessel.\u003c\/li\u003e\n      \u003cli\u003eGDL 40 weather receivers keeping you informed on storms ahead.\u003c\/li\u003e\n      \u003cli\u003eGFS 10 fuel sensors optimizing range calculations.\u003c\/li\u003e\n      \u003cli\u003eGHP 12\/20 autopilots for hands-free steering on long passages.\u003c\/li\u003e\n      \u003cli\u003eGMI 10\/20 instruments displaying speed, depth, and wind data.\u003c\/li\u003e\n      \u003cli\u003eGPS 19x receivers for rock-solid positioning.\u003c\/li\u003e\n      \u003cli\u003eGPSMAP series chartplotters as your central command hub.\u003c\/li\u003e\n      \u003cli\u003eVHF 200\/300 radios and VHF 300 AIS for communication and tracking.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eEven if your setup includes third-party NMEA 2000 gear, this cable adheres to the standard, promoting interoperability across brands.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-benefits\"\u003e\n    \u003ch2\u003eEasy Installation and Real-World Benefits\u003c\/h2\u003e\n    \u003cp\u003eSetting up your network is straightforward: Snap one end into an existing T-connector or power tee on the backbone, then route the other to your device or further backbone segment. Use zip ties and cable clips for strain relief, and always terminate unused ends with caps to prevent moisture ingress.\u003c\/p\u003e\n    \n    \u003ch3\u003eWhy Boaters Love It\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEnhanced Situational Awareness:\u003c\/strong\u003e Link sensors for live feeds on fishfinders, engine data, and weather—crucial for offshore adventures.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCost-Effective Expansion:\u003c\/strong\u003e Add devices incrementally without rewiring the entire boat.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eReduced Downtime:\u003c\/strong\u003e Reliable connections mean fewer troubleshooting sessions mid-trip.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFuture-Proofing:\u003c\/strong\u003e Supports growing networks as you add radars, sirens, or black box systems.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003ePro tip: Plan your backbone layout in a daisy-chain fashion along the vessel's centerline for minimal drop lengths under 6 meters, optimizing signal speed and reliability.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Lasting Performance Tips\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan, inspect connectors annually for corrosion—especially in saltwater use. Rinse with fresh water after exposure, and avoid sharp bends that could crimp internals. If noise issues arise, add inline terminators at network ends. This cable's shielding minimizes interference from alternators or inverters, but proper grounding enhances it further.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\"Switched to these Garmin cables on my trawler—night-and-day difference in data sync across my GPSMAP and autopilot. No more lag during maneuvers!\" – Experienced Captain\u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the difference between a backbone and drop cable in NMEA 2000?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The backbone is the main highway running the length of the boat, while drop cables branch off to individual devices. This Garmin cable serves both roles, offering flexibility for extensions or direct connections.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the Garmin NMEA 2000 backbone\/drop cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It measures 6 meters (approximately 19 feet), providing sufficient length for most marine installations without creating excessive slack.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for saltwater environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's engineered with marine-grade materials resistant to corrosion, UV damage, and vibration, making it ideal for harsh offshore conditions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this cable with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely. It complies with the NMEA 2000 standard, ensuring compatibility with certified devices from other manufacturers like Lowrance or Simrad.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need special tools to install this cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, the plug-and-play Micro-C connectors make installation simple with just basic routing tools like cable ties and clips—no crimping required.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum number of drop cables on an NMEA 2000 backbone?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The standard supports up to 50 drops, but for best performance, keep drops under 6 meters and total backbone under 100 meters.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot connection issues with this cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check for secure seating, inspect for damage, ensure terminators are in place, and verify power at 9-16V DC. Garmin's network diagnostic tools on compatible displays help pinpoint faults.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the difference between a backbone and drop cable in NMEA 2000?\u003c\/summary\u003e\n        \u003cp\u003eThe backbone is the main highway running the length of the boat, while drop cables branch off to individual devices. This Garmin cable serves both roles, offering flexibility for extensions or direct connections.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the Garmin NMEA 2000 backbone\/drop cable?\u003c\/summary\u003e\n        \u003cp\u003eIt measures 6 meters (approximately 19 feet), providing sufficient length for most marine installations without creating excessive slack.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this cable suitable for saltwater environments?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's engineered with marine-grade materials resistant to corrosion, UV damage, and vibration, making it ideal for harsh offshore conditions.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this cable with non-Garmin NMEA 2000 devices?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely. It complies with the NMEA 2000 standard, ensuring compatibility with certified devices from other manufacturers like Lowrance or Simrad.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDo I need special tools to install this cable?\u003c\/summary\u003e\n        \u003cp\u003eNo, the plug-and-play Micro-C connectors make installation simple with just basic routing tools like cable ties and clips—no crimping required.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the maximum number of drop cables on an NMEA 2000 backbone?\u003c\/summary\u003e\n        \u003cp\u003eThe standard supports up to 50 drops, but for best performance, keep drops under 6 meters and total backbone under 100 meters.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I troubleshoot connection issues with this cable?\u003c\/summary\u003e\n        \u003cp\u003eCheck for secure seating, inspect for damage, ensure terminators are in place, and verify power at 9-16V DC. Garmin's network diagnostic tools on compatible displays help pinpoint faults.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000® Backbone\/Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eExtend your NMEA 2000® backbone with Garmin's 18' (6M) backbone\/drop cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIS™ 300\/600 Blackbox Transceiver\u003c\/li\u003e\n\u003cli\u003eGBT™ 10\u003c\/li\u003e\n\u003cli\u003eGCL™ 20 Low-light Imaging Camera\u003c\/li\u003e\n\u003cli\u003eGDL™ 40\u003c\/li\u003e\n\u003cli\u003eGET™ 10\u003c\/li\u003e\n\u003cli\u003eGFL™ 10\u003c\/li\u003e\n\u003cli\u003eGFS™ 10\u003c\/li\u003e\n\u003cli\u003eGHP™ 12 Autopilot System\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System with SmartPump\u003c\/li\u003e\n\u003cli\u003eGMI™ 10\/20 Marine Instrument\u003c\/li\u003e\n\u003cli\u003eGPS 19x NMEA 2000®\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPSMAP® Series\u003c\/li\u003e\n\u003cli\u003eVHF 200\/300 Marine Radio\u003c\/li\u003e\n\u003cli\u003eVHF 300 AIS\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eGarmin 6m NMEA 2000 backbone\/drop cable. Use our 19 5\/8' backbone\/branch cables to extend the NMEA 2000 backbone network. Use this cable to extend and customize the NMEA 2000 network...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31892\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11076-01\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078119\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536069013597,"sku":"CWR-31892","price":33.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-backbone-1_302e429b-f3b4-4f76-befc-eacef8ac565e.jpg?v=1673072578"},{"product_id":"43004-garmin-nmea-2000-backbone-cable-10m","title":"Garmin NMEA 2000 Backbone Cable (10M)","description":"NMEA 2000, Backbone Cable, 10m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eBuilding a reliable marine electronics network starts with the right backbone. The Garmin NMEA 2000 Backbone Cable in 10-meter length gives you the flexibility to connect more devices across your vessel without signal loss or clutter. Whether you're upgrading your chartplotter setup, integrating radar, or linking autopilots, this durable black cable ensures seamless data sharing between compatible Garmin marine gear.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Extend Your NMEA 2000 Network?\u003c\/h2\u003e\n  \u003cp\u003eNMEA 2000 is the go-to standard for boaters who want plug-and-play connectivity for GPS, depth finders, instruments, and more. A solid backbone like this 32-foot extension prevents weak points in your setup, letting you position displays and sensors exactly where you need them. It's built tough for harsh saltwater environments, with rugged construction that resists corrosion and vibration from rough seas.\u003c\/p\u003e\n  \n  \u003cp\u003eImagine running a clean, organized network from helm to engine room—no more tangled wires or short runs that limit your options. This cable supports high-speed data transfer, keeping your AIS, VHF radio, and autopilot in constant sync for safer navigation.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Advantages for Boaters\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Extension:\u003c\/strong\u003e Use as a backbone extender or drop cable to add devices anywhere along the network.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMarine-Tough Build:\u003c\/strong\u003e Black jacket shields against UV rays, moisture, and physical wear, ideal for open-deck installations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEasy Integration:\u003c\/strong\u003e Fits perfectly with Garmin's ecosystem, supporting everything from compact echoMAP units to full autopilot systems.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFuture-Proof Design:\u003c\/strong\u003e Handles growing networks as you add sonar modules, cameras, or weather sensors.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eBroad Compatibility Across Garmin Marine Devices\u003c\/h2\u003e\n  \u003cp\u003eThis cable works hand-in-hand with a wide array of Garmin products, making it a staple for custom setups:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eAIS 300\/600 Blackbox Transceivers for collision avoidance.\u003c\/li\u003e\n    \u003cli\u003eGBT 10 audio servers and GCL 20 cameras for enhanced onboard monitoring.\u003c\/li\u003e\n    \u003cli\u003eGDL 40 weather receivers, GET 10 engine transducers, and GFL 10 fuel sensors.\u003c\/li\u003e\n    \u003cli\u003eGFS 10 fuel sensors and powerful GHP 12\/20 autopilots.\u003c\/li\u003e\n    \u003cli\u003eGMI 10\/20 instruments, GPS 19x receivers, GPSMAP series chartplotters.\u003c\/li\u003e\n    \u003cli\u003eVHF 200\/300 radios and VHF 300 AIS units.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eIt's also ready for echoMAP CHIRP models like the 52cv and 52dv, ensuring your fishfinder or nav screen stays connected.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips for Optimal Performance\u003c\/h2\u003e\n  \u003cp\u003eGetting the most from your NMEA 2000 backbone is straightforward:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlan Your Layout:\u003c\/strong\u003e Sketch the backbone route from power source through T-connectors, keeping runs under 100 meters total.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSecure Properly:\u003c\/strong\u003e Use cable ties and conduit to avoid chafing near moving parts or sharp edges.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower It Right:\u003c\/strong\u003e Insert a dedicated 12V power tee within 6 meters of the start to maintain stable voltage.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTest Connections:\u003c\/strong\u003e Power up and check device recognition via your Garmin display—no tools needed for diagnostics.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTerminate Ends:\u003c\/strong\u003e Always cap unused ends with 120-ohm terminators to prevent signal reflections.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \n  \u003cp\u003eThese steps minimize downtime and maximize reliability, even on long passages.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Benefits from Fellow Boaters\u003c\/h2\u003e\n  \u003cp\u003eSkippers upgrading from basic wiring rave about the difference: quicker engine data updates, smoother autopilot tracking, and fewer troubleshooting headaches. It's not just a cable—it's the foundation for a smarter, safer boat.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat is the exact length of this Garmin NMEA 2000 backbone cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThis cable measures 10 meters, or about 32 feet, providing ample reach for most vessel sizes without excess slack.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this cable to connect non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, as it follows the standard NMEA 2000 protocol, it's compatible with any certified device from other brands, as long as they use Micro-C connectors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable suitable for outdoor marine use?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—its black, UV-resistant jacket and waterproof connectors make it perfect for exposed deck runs and engine compartments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need special tools to install this backbone extension?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, it's plug-and-play. Just connect to existing T-connectors or backbone ends; no crimping or soldering required.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does this cable improve my boating experience?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt enables real-time data sharing across devices, like sharing GPS position with your autopilot or VHF, for more intuitive navigation and control.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the warranty on this Garmin cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes with a limited 1-year warranty covering manufacturing defects under normal marine use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I daisy-chain multiple backbone cables?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, you can chain up to the network's 100-meter limit, but add power injection every 6 meters for best results.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What is the exact length of this Garmin NMEA 2000 backbone cable?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"This cable measures 10 meters, or about 32 feet, providing ample reach for most vessel sizes without excess slack.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can I use this cable to connect non-Garmin NMEA 2000 devices?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, as it follows the standard NMEA 2000 protocol, it's compatible with any certified device from other brands, as long as they use Micro-C connectors.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is this cable suitable for outdoor marine use?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Absolutely—its black, UV-resistant jacket and waterproof connectors make it perfect for exposed deck runs and engine compartments.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Do I need special tools to install this backbone extension?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No, it's plug-and-play. Just connect to existing T-connectors or backbone ends; no crimping or soldering required.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How does this cable improve my boating experience?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It enables real-time data sharing across devices, like sharing GPS position with your autopilot or VHF, for more intuitive navigation and control.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the warranty on this Garmin cable?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It comes with a limited 1-year warranty covering manufacturing defects under normal marine use.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Can I daisy-chain multiple backbone cables?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"Yes, you can chain up to the network's 100-meter limit, but add power injection every 6 meters for best results.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101107602 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eAIS™ 300\/600 Blackbox Transceiver GBT™ 10\/ GBT\/GCL\/GDL\/GET\/GFL\/GFS\/GHP 12 Autopilot System\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e32 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101107602 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtend Your NMEA 2000 Backbone With Our Backbone\/Drop Cables\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ® CHIRP 52cv, 52dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101107602 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000® Backbone\/Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eExtend your NMEA 2000® backbone with Garmin's 30' (10M) backbone\/drop cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIS™ 300\/600 Blackbox Transceiver\u003c\/li\u003e\n\u003cli\u003eGBT™ 10\u003c\/li\u003e\n\u003cli\u003eGCL™ 20 Low-light Imaging Camera\u003c\/li\u003e\n\u003cli\u003eGDL™ 40\u003c\/li\u003e\n\u003cli\u003eGET™ 10\u003c\/li\u003e\n\u003cli\u003eGFL™ 10\u003c\/li\u003e\n\u003cli\u003eGFS™ 10\u003c\/li\u003e\n\u003cli\u003eGHP™ 12 Autopilot System\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System with SmartPump\u003c\/li\u003e\n\u003cli\u003eGMI™ 10\/20 Marine Instrument\u003c\/li\u003e\n\u003cli\u003eGPS 19x NMEA 2000®\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPSMAP® Series\u003c\/li\u003e\n\u003cli\u003eVHF 200\/300 Marine Radio\u003c\/li\u003e\n\u003cli\u003eVHF 300 AIS\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"Extend your NMEA 2000 backbone with this backbone\\\/drop cables. Wherever your marine adventures take you, this easy-to-understand, simple-to-use, and dependable electronics will help you get most out of your time on the water. Made to be tough as nails and durable, Garmin marine electronics will provide you maximum convenience, reliability and value. Built with avid boat and fishing enthusiasts in mind, innovative electronics by Garmin features a rugged construction and uses the latest technology to provide years of reliable, trouble-free performance under harshest marine conditions.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31893\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11076-02\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078126\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536069177437,"sku":"CWR-31893","price":37.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-backbone-1_fa88c77b-f1ab-4939-afed-31d2792f44fb.jpg?v=1673072590"},{"product_id":"43005-garmin-nmea-2000-t-connector","title":"Garmin NMEA 2000 T Connector","description":"NMEA 2000, Tee Connector\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"benefits-section\"\u003e\n    \u003ch2\u003eStreamline Your Marine Network with Seamless Connectivity\u003c\/h2\u003e\n    \u003cp\u003eBuilding a robust marine electronics setup demands reliable connections that withstand harsh saltwater environments. The Garmin NMEA 2000 T Connector steps in as a vital component, enabling you to branch out your backbone cable effortlessly. Imagine adding sensors, displays, or transducers without disrupting your main network line—this T-shaped design makes it possible, keeping data flowing smoothly between your Garmin chartplotters, autopilots, and multifunction displays.\u003c\/p\u003e\n    \u003cp\u003eBoat owners and installers rave about its plug-and-play simplicity, which cuts down on wiring headaches during upgrades or expansions. Whether you're outfitting a center console for weekend fishing trips or rigging a larger vessel for offshore adventures, this connector ensures your NMEA 2000 network remains organized and efficient.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"features-section\"\u003e\n    \u003ch2\u003eKey Features That Set It Apart\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSingle-Port Design:\u003c\/strong\u003e Perfect for adding one drop cable to your backbone, maintaining a clean, clutter-free setup.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Marine Build:\u003c\/strong\u003e Engineered to handle vibrations, moisture, and corrosion, ensuring long-term performance on the water.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStandards-Compliant:\u003c\/strong\u003e Fully adheres to NMEA 2000 protocols for interoperability with a wide range of marine electronics.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact Footprint:\u003c\/strong\u003e Its low-profile T shape fits snugly in tight console spaces, ideal for custom installations.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eUnlike basic inline couplers, this T connector promotes better network architecture by allowing strategic branching, which can improve signal integrity and reduce latency in data transmission—crucial for real-time sonar readings or GPS updates.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-section\"\u003e\n    \u003ch2\u003eUniversal Fit for Garmin Marine Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eDesigned specifically for Garmin's marine backbone cables, it integrates seamlessly with popular series like GPSMAP, ECHOMAP, and GMI 20 instruments. It's also backward-compatible with older NMEA 2000 setups, making it a go-to for retrofits. Pair it with Garmin transducers, engine data interfaces, or radar units to create a unified dashboard that delivers actionable insights at a glance.\u003c\/p\u003e\n    \u003cp\u003ePro tip: For multi-device networks, use multiple T connectors along the backbone to daisy-chain peripherals without exceeding drop length limits, optimizing power distribution and data speeds.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEasy Installation: Step-by-Step for DIY Enthusiasts\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePower down all connected devices and disconnect the backbone cable ends.\u003c\/li\u003e\n      \u003cli\u003eLocate your desired branching point on the backbone.\u003c\/li\u003e\n      \u003cli\u003eInsert the T connector: Align the backbone cable into the straight-through ports, and plug your drop cable into the perpendicular port.\u003c\/li\u003e\n      \u003cli\u003eSecure with the locking collars—hand-tighten until snug, avoiding overtightening.\u003c\/li\u003e\n      \u003cli\u003eRoute cables away from heat sources and sharp edges, using zip ties for strain relief.\u003c\/li\u003e\n      \u003cli\u003ePower up and verify connections via your Garmin display's network diagnostics.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eThis process typically takes under 5 minutes, empowering even novice installers to expand their systems confidently. Always test for continuity post-install to catch any pinched wires early.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLongevity Tips for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eTo maximize reliability, inspect connections seasonally for corrosion—especially in saltwater environments. A quick rinse with freshwater after every outing prevents buildup. If diagnosing network issues, swap the T connector first; it's often the culprit in intermittent dropouts. Storing spares aboard ensures you're never sidelined by a faulty link.\u003c\/p\u003e\n    \u003cp\u003eAdvanced users: Monitor backbone termination resistors when adding T connectors to avoid bus errors, maintaining the 120-ohm resistance at each end of the network.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"why-choose-section\"\u003e\n    \u003ch2\u003eWhy Boaters Trust This T Connector for Their Rigs\u003c\/h2\u003e\n    \u003cp\u003eIn the world of marine networking, reliability trumps all. This connector shines in real-world scenarios—from tournament bass boats chasing precise contours to bluewater cruisers relying on autopilot integration. It eliminates common pain points like signal loss or power drops, letting you focus on the horizon rather than troubleshooting.\u003c\/p\u003e\n    \u003cblockquote\u003e\"Switched to these T connectors for my full Garmin suite—night-and-day difference in stability during rough seas.\" – Experienced Offshore Captain\u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the purpose of the Garmin NMEA 2000 T Connector?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It allows you to branch a drop cable from your main NMEA 2000 backbone without cutting or splicing wires, enabling easy addition of devices like sensors or displays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this T connector waterproof and suitable for marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's built with marine-grade seals to resist water ingress, corrosion, and UV exposure, making it ideal for boats in saltwater or freshwater.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How many T connectors can I use in one NMEA 2000 network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"You can use multiple along the backbone, but limit drop cables to 6 meters each and ensure proper termination to prevent signal issues.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, as it complies with NMEA 2000 standards, it's compatible with devices from other brands like Lowrance or Simrad.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I install the T connector myself, or do I need a professional?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for straightforward plug-and-play installation, suitable for DIYers with basic tools. No soldering required.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if my network shows errors after adding the T connector?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check terminations, cable lengths, and power insertion points. Use your Garmin unit's diagnostics to isolate backbone faults.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is it compatible with Garmin's older marine products?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it works with legacy Garmin NMEA 2000 systems, facilitating seamless upgrades.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003c!-- FAQs rendered for accessibility and SEO --\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the purpose of the Garmin NMEA 2000 T Connector?\u003c\/summary\u003e\n        \u003cp\u003eIt allows you to branch a drop cable from your main NMEA 2000 backbone without cutting or splicing wires, enabling easy addition of devices like sensors or displays.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this T connector waterproof and suitable for marine use?\u003c\/summary\u003e\n        \u003cp\u003eYes, it's built with marine-grade seals to resist water ingress, corrosion, and UV exposure, making it ideal for boats in saltwater or freshwater.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow many T connectors can I use in one NMEA 2000 network?\u003c\/summary\u003e\n        \u003cp\u003eYou can use multiple along the backbone, but limit drop cables to 6 meters each and ensure proper termination to prevent signal issues.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it work with non-Garmin NMEA 2000 devices?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely, as it complies with NMEA 2000 standards, it's compatible with devices from other brands like Lowrance or Simrad.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I install the T connector myself, or do I need a professional?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for straightforward plug-and-play installation, suitable for DIYers with basic tools. No soldering required.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat if my network shows errors after adding the T connector?\u003c\/summary\u003e\n        \u003cp\u003eCheck terminations, cable lengths, and power insertion points. Use your Garmin unit's diagnostics to isolate backbone faults.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs it compatible with Garmin's older marine products?\u003c\/summary\u003e\n        \u003cp\u003eYes, it works with legacy Garmin NMEA 2000 systems, facilitating seamless upgrades.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA 2000 T Connector\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eNMEA 2000 T connector warning: This product can expose you to chemicals known to cause cancer, birth defects or other reproductive harm in California. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31894\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11078-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759076740\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536069275741,"sku":"CWR-31894","price":25.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-t-1.jpg?v=1673072599"},{"product_id":"43006-garmin-nmea-2000-terminator-male","title":"Garmin NMEA 2000 Terminator, Male","description":"NMEA 2000, Terminator, Male\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnsuring your marine electronics network runs smoothly starts with the basics—like proper termination. The Garmin male NMEA 2000 terminator steps in as that essential piece, designed specifically to cap off one end of your NMEA 2000 backbone. Without it, signal reflections can disrupt data flow between your chartplotters, sensors, and other devices, leading to unreliable readings or intermittent dropouts on the water.\u003c\/p\u003e\n\n  \u003cp\u003eBuilt tough for harsh marine environments, this black terminator features a rugged, waterproof male connector that snaps securely into place. It's the go-to choice for boaters upgrading their setups or troubleshooting network issues. Think of it as the guardrail that keeps your digital highway clear and efficient, preventing those frustrating glitches during critical moments like navigation or fishing.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Every NMEA 2000 Backbone Needs Terminators\u003c\/h2\u003e\n  \u003cp\u003eNMEA 2000 networks rely on a backbone cable as the central spine connecting all your devices. To maintain signal integrity, you must terminate both ends with resistors—typically 120 ohms each. Skip this, and you'll face:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eErratic sensor data from depth finders or wind instruments.\u003c\/li\u003e\n    \u003cli\u003eDelayed or lost GPS updates on multifunction displays.\u003c\/li\u003e\n    \u003cli\u003eCommunication failures between engines, autopilots, and radars.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eInstalling this male terminator at the appropriate end completes the circuit, ensuring low-loss, high-speed CAN bus communication across your vessel. It's a small component with a big impact on overall system reliability.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration in Your Garmin Ecosystem\u003c\/h2\u003e\n  \u003cp\u003ePerfectly matched for Garmin marine products, this terminator works hand-in-hand with chartplotters like the GPSMAP series, echoMAP units, and networked sensors. Whether you're expanding a basic setup with a single transducer or building a full-bridge system with multiple stations, it slots right in without adapters or compatibility headaches.\u003c\/p\u003e\n  \u003cp\u003ePro tip: Always pair it with a female terminator at the opposite end for balanced resistance. Double-check your backbone layout—keep drops under 6 meters and total backbone length below 100 meters to optimize performance.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Made Simple for DIY Boaters\u003c\/h2\u003e\n  \u003cp\u003eNo need for specialized tools. Here's a quick step-by-step:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003ePower down all devices and disconnect the network.\u003c\/li\u003e\n    \u003cli\u003eLocate the end of your backbone cable (the straight-run main line).\u003c\/li\u003e\n    \u003cli\u003ePush the male connector firmly into the backbone's female port until it clicks.\u003c\/li\u003e\n    \u003cli\u003eSecure with cable ties if needed to prevent vibration looseness.\u003c\/li\u003e\n    \u003cli\u003ePower up and verify network status lights on connected devices.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003eCommon pitfalls? Over-tightening (it’s a friction fit) or placing terminators in the middle of the backbone instead of the ends. Get it right, and your network will hum along quietly in the background.\u003c\/p\u003e\n\n  \u003ch2\u003eLong-Term Durability on the Water\u003c\/h2\u003e\n  \u003cp\u003eCrafted from high-grade, UV-resistant materials, this terminator withstands salt spray, constant submersion, and temperature swings from freezing decks to tropical suns. Unlike generic alternatives, its precision-engineered connector minimizes insertion force while maximizing seal integrity, reducing wear over seasons of use.\u003c\/p\u003e\n  \u003cp\u003eFor maintenance, inspect connections annually during winterization. A quick wipe-down keeps corrosion at bay, extending its life indefinitely.\u003c\/p\u003e\n\n  \u003ch2\u003eBoost Your Boat's Network Performance\u003c\/h2\u003e\n  \u003cp\u003eBoat owners rave about the stability this brings to complex setups—fewer false alarms from AIS or radar, smoother autopilot tracking, and real-time data sharing that feels effortless. If you're chasing peak performance without the complexity, this terminator is your foundation.\u003c\/p\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need two NMEA 2000 terminators for my network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, one at each end of the backbone. A male at one end pairs with a female at the other to provide the required 120-ohm resistance and prevent signal bounce.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this Garmin terminator compatible with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely. NMEA 2000 follows a universal standard, so it works seamlessly with devices from brands like Simrad, Lowrance, or Raymarine, as long as they adhere to the spec.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What happens if I forget to install a terminator?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Signal reflections occur, causing data corruption. Symptoms include flickering displays, dropped connections, or inaccurate readings from instruments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this terminator in a T-connector or drop line?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, terminators go only on the backbone ends. T-connectors are for branches; placing a terminator there disrupts the network.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot if my network still has issues after installing?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check backbone length (max 100m), power insertion point (middle ideal), and drop cable lengths (under 6m). Use a multimeter to verify 120-ohm resistance across the backbone.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this terminator waterproof for open-water boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it features an IP67-rated seal, protecting against immersion up to 1 meter for 30 minutes, plus resistance to salt and chemicals.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it come with any cables or accessories?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's a standalone terminator with a male connector ready to plug directly into your backbone—no extra cables needed.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDo I need two NMEA 2000 terminators for my network?\u003c\/summary\u003e\n        \u003cp\u003eYes, one at each end of the backbone. A male at one end pairs with a female at the other to provide the required 120-ohm resistance and prevent signal bounce.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this Garmin terminator compatible with non-Garmin NMEA 2000 devices?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely. NMEA 2000 follows a universal standard, so it works seamlessly with devices from brands like Simrad, Lowrance, or Raymarine, as long as they adhere to the spec.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat happens if I forget to install a terminator?\u003c\/summary\u003e\n        \u003cp\u003eSignal reflections occur, causing data corruption. Symptoms include flickering displays, dropped connections, or inaccurate readings from instruments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this terminator in a T-connector or drop line?\u003c\/summary\u003e\n        \u003cp\u003eNo, terminators go only on the backbone ends. T-connectors are for branches; placing a terminator there disrupts the network.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I troubleshoot if my network still has issues after installing?\u003c\/summary\u003e\n        \u003cp\u003eCheck backbone length (max 100m), power insertion point (middle ideal), and drop cable lengths (under 6m). Use a multimeter to verify 120-ohm resistance across the backbone.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this terminator waterproof for open-water boating?\u003c\/summary\u003e\n        \u003cp\u003eYes, it features an IP67-rated seal, protecting against immersion up to 1 meter for 30 minutes, plus resistance to salt and chemicals.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it come with any cables or accessories?\u003c\/summary\u003e\n        \u003cp\u003eIt's a standalone terminator with a male connector ready to plug directly into your backbone—no extra cables needed.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA 2000 terminator - male \u003cbr\u003e\u003cbr\u003e\"GarminThis standard male NMEA 2000 light cable connector provides termination resistance for one end of the backbone of the network. Each female NMEA 2000 terminator connector sold separately. This device is made with durable plastic construction for long-lasting use.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31895\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11080-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078164\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536069341277,"sku":"31895","price":17.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-terminator-1.jpg?v=1673072608"},{"product_id":"43007-garmin-nmea-2000-terminator-female","title":"Garmin NMEA 2000 Terminator, Female","description":"NMEA 2000, Terminator, Female\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eEnsuring your marine electronics network runs smoothly starts with the basics—like proper termination. This female NMEA 2000 terminator steps in as a reliable endpoint for your backbone cable, preventing signal reflections that can disrupt data flow across chartplotters, sensors, and multifunction displays. Built tough for harsh saltwater environments, it snaps into place with a standard light cable connector, delivering the resistance needed for stable communication in busy boating scenarios.\u003c\/p\u003e\n    \n    \u003cp\u003eWhether you're rigging a new setup on your center console or troubleshooting an existing network during a weekend cruise, this black female terminator keeps things clean and professional. It's a small component with a big impact, helping avid anglers, sailors, and commercial operators maintain crystal-clear GPS, sonar, and engine data without dropouts or errors.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"why-it-matters\"\u003e\n    \u003ch2\u003eWhy Proper NMEA 2000 Termination Keeps Your Boat Network Bulletproof\u003c\/h2\u003e\n    \u003cp\u003eNMEA 2000 networks thrive on a backbone-drop topology, where every branch and device connects reliably. Without terminators at both ends of the backbone, electrical signals bounce back like echoes in a canyon, causing intermittent faults, slow response times, or total blackouts. This female version caps off one end securely, matching the male counterpart for a complete setup.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Provides the exact 120-ohm resistance to absorb signals, ensuring low-noise operation even with multiple high-power devices like radar domes or digital switching.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeatherproof Design:\u003c\/strong\u003e Sealed against moisture, UV rays, and corrosion—essential for deck-mounted installations exposed to spray and sun.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Backbone Extension:\u003c\/strong\u003e Fits seamlessly into Garmin's ecosystem, supporting longer runs up to the protocol's limits without power insertion complications.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eBoat owners often overlook termination until the first glitch hits mid-fishing trip. Proactive installs mean fewer headaches and more time on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eStep-by-Step Installation for Flawless NMEA 2000 Integration\u003c\/h2\u003e\n    \u003cp\u003eSetting this up takes minutes and basic tools—no soldering required. Here's how to integrate it into your marine setup:\u003c\/p\u003e\n    \n    \u003col\u003e\n      \u003cli\u003ePlan your backbone: Measure from the central T-connector to the farthest drop, ensuring total length stays under guidelines.\u003c\/li\u003e\n      \u003cli\u003eIdentify ends: Place this female terminator at the open female end of your backbone cable.\u003c\/li\u003e\n      \u003cli\u003eTwist and lock: Align the pins, push firmly until it clicks, then secure any strain relief.\u003c\/li\u003e\n      \u003cli\u003eTest the network: Power up and scan for active terminators using compatible Garmin software—look for green status lights.\u003c\/li\u003e\n      \u003cli\u003eLabel for future: Use cable ties or tags to note \"Terminator - Female End\" for easy maintenance.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Always verify your network with two terminators (one male, one female). Stub drops shorter than 2 meters don't need extras, but backbone ends do.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"common-scenarios\"\u003e\n    \u003ch2\u003eReal-World Boat Applications and Troubleshooting Wins\u003c\/h2\u003e\n    \u003cp\u003eFrom coastal cruisers to offshore tournaments, this terminator shines in diverse setups:\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFishing Rigs:\u003c\/strong\u003e Pairs with transducers and fishfinders for uninterrupted sonar pings and waypoints.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSailboat Suites:\u003c\/strong\u003e Supports wind sensors, autopilots, and VHF integration without latency.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRetrofits:\u003c\/strong\u003e Revives older NMEA 0183-to-2000 gateways by stabilizing the bus.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eEncountering \"No Network\" errors? Double-check terminator seating—loose connections mimic open ends. In multi-vendor networks, it bridges Garmin gear with Lowrance or Simrad seamlessly, as long as everyone follows NMEA standards.\u003c\/p\u003e\n    \n    \u003cblockquote\u003e\n      \"Swapped out a faulty terminator mid-trip—network came alive instantly. Game-changer for reliability.\"\n      \u003ccite\u003e—Seasoned charter captain\u003c\/cite\u003e\n    \u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Care for Peak Network Performance\u003c\/h2\u003e\n    \u003cp\u003eTo maximize lifespan in salty conditions:\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003eInspect annually: Look for cracks or corrosion; rinse with fresh water after exposure.\u003c\/li\u003e\n      \u003cli\u003eAvoid overtightening: Hand-tight plus a quarter turn prevents damage.\u003c\/li\u003e\n      \u003cli\u003eSpare onboard: Carry extras for quick field swaps during long passages.\u003c\/li\u003e\n      \u003cli\u003eUpgrade path: Ready for future expansions like adding AIS or engine monitoring.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is the role of a female NMEA 2000 terminator?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It provides termination resistance at one end of the NMEA 2000 backbone, preventing signal reflections for reliable data transmission across marine devices.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need two NMEA 2000 terminators for my network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, standard setups require one at each backbone end—one female and one male—to fully terminate the bus and avoid communication issues.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I know if my NMEA 2000 network needs a terminator?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Signs include error messages, slow device response, or diagnostic scans showing 'open circuit.' Active networks confirm via status checks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this terminator compatible with other marine brands?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, as a standard NMEA 2000 component, it works across brands like Garmin, Raymarine, and Furuno, following the CAN bus protocol.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this on drop cables or only the backbone?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Exclusively for backbone ends. Drop cables to devices shouldn't be terminated unless over 2 meters and acting as backbone extensions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What happens if I install the terminator incorrectly?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Misalignment can cause partial connections, leading to data loss or power issues. Always ensure a firm click and verify pins.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How rugged is this for offshore use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed for marine extremes—waterproof, UV-resistant, and vibration-proof—to handle spray, sun, and rough seas reliably.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101108100 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eProperly Terminate An NMEA 2000 Network\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eType: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFemale Terminator\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eQuantity: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eSingle\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101108100 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eStandard Female NMEA 2000 Light Cable Connector Provides Termination Resistance For One End Of The Backbone Of The Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ™ CHIRP 52cv, 52dv, 53cv, 53dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101108100 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eNMEA 2000 terminator -  female \u003cbr\u003e\u003cbr\u003eThis is the NMEA 2000 network cable connector you are looking for. This standard NMEA 2000 female cable connector can provide termination resistance for one end of the cable.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31896\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11081-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078171\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536070258781,"sku":"31896","price":17.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-terminator-1_05ed0962-1ccf-45db-921d-3c00577e3847.jpg?v=1673072617"},{"product_id":"43008-garmin-nmea-2000-field-installable-connector-male","title":"Garmin NMEA 2000 Field Installable Connector, Male","description":"NMEA 2000, Connector, Field-Installable, Male\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eCustomizing your marine network setup just got easier with this rugged male field-installable connector designed specifically for Garmin NMEA 2000 systems. Whether you're extending a backbone cable across a wide deck, crafting a precise drop line to a chartplotter, or trimming excess length from existing wiring, this connector delivers reliable, waterproof connections that stand up to harsh saltwater environments.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose a Field-Installable Connector for Your Boat's Network?\u003c\/h2\u003e\n  \u003cp\u003eStandard NMEA 2000 cables often fall short—or run too long—for unique vessel layouts. This male connector lets you build exactly what you need on-site, saving time and reducing clutter. No more wrestling with pre-made lengths that don't fit your helm station or transducer mounts. It's a game-changer for DIY boaters, professional installers, and anyone optimizing radar, autopilot, or sonar integrations.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Applications:\u003c\/strong\u003e Perfect for creating drop cables to individual devices like multifunction displays (MFDs), sensors, or engines.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBackbone Extensions:\u003c\/strong\u003e Seamlessly lengthen your main network trunk without signal loss.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Shortening:\u003c\/strong\u003e Neatly terminate and reconnect Garmin NMEA 2000 cables for a cleaner install.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eKey Features Tailored for Marine Reliability\u003c\/h2\u003e\n  \u003cp\u003eBuilt to NMEA 2000 standards, this connector ensures plug-and-play compatibility across Garmin's marine ecosystem. Its field-installable design means straightforward crimping with common tools—no special factory equipment required. The robust housing resists corrosion, UV exposure, and vibration from rough seas, maintaining data integrity for critical navigation data like GPS, depth, and speed.\u003c\/p\u003e\n  \n  \u003cfigure\u003e\n    \u003cimg src=\"placeholder-image.jpg\" alt=\"Close-up of Garmin NMEA 2000 male field installable connector showing pins and waterproof seal\" width=\"600\" height=\"400\"\u003e\n    \u003cfigcaption\u003ePrecision-engineered pins for secure, low-resistance connections.\u003c\/figcaption\u003e\n  \u003c\/figure\u003e\n\n  \u003ch2\u003eStep-by-Step Installation Guide for Flawless Results\u003c\/h2\u003e\n  \u003cp\u003eGetting this connector up and running takes minutes with basic prep:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStrip the Cable:\u003c\/strong\u003e Carefully remove 2-3 inches of outer jacket from your NMEA 2000 wire, exposing the twisted pairs without nicking conductors.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInsert and Crimp:\u003c\/strong\u003e Slide the cable into the connector body, align pins to color-coded wires, and crimp firmly using an NMEA-approved tool for a gas-tight seal.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSeal It Up:\u003c\/strong\u003e Apply the integrated O-ring and screw the backshell tight for IP67 waterproofing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTest the Network:\u003c\/strong\u003e Power up your Garmin devices and verify bus communication—no dropouts or errors.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Always route cables away from high-voltage lines and secure with zip ties to prevent chafing. For multi-drop networks, maintain terminators at each end to avoid reflections.\u003c\/p\u003e\n\n  \u003ch2\u003eEnhance Your Garmin Marine Network Performance\u003c\/h2\u003e\n  \u003cp\u003ePair this with Garmin's backbone and drop cables to create a star or daisy-chain topology optimized for your boat size. On larger vessels, it supports high-data-rate devices like premium sounders or cameras without bandwidth bottlenecks. Users report fewer troubleshooting headaches and faster network speeds after custom wiring swaps.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat tools do I need to install this NMEA 2000 male connector?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYou'll need a wire stripper, NMEA 2000 crimping tool, and possibly a pin insertion\/extraction tool. No soldering required—crimping ensures reliable contacts.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this connector compatible with all Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it's fully compatible with Garmin marine products that use the NMEA 2000 backbone, including chartplotters, radars, autopilots, and sensors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this to connect to non-Garmin NMEA 2000 equipment?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—NMEA 2000 is an open standard, so it works with devices from other brands like engines, thrusters, or third-party MFDs, as long as they follow the protocol.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow waterproof is the field-installed connection?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt achieves an IP67 rating when properly assembled, protecting against immersion up to 1 meter for 30 minutes—ideal for deck washes and splashes.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the maximum cable length I can create with this connector?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNMEA 2000 networks support up to 100 meters total backbone length with drops under 6 meters each. Custom cables should stay within these limits for optimal performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it support power insertion or T-junctions?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThis is a straight male connector for end-to-end or drop connections. For power tees or junctions, pair it with Garmin's inline T-connectors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What tools do I need to install this NMEA 2000 male connector?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"You'll need a wire stripper, NMEA 2000 crimping tool, and possibly a pin insertion\/extraction tool. No soldering required—crimping ensures reliable contacts.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this connector compatible with all Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's fully compatible with Garmin marine products that use the NMEA 2000 backbone, including chartplotters, radars, autopilots, and sensors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this to connect to non-Garmin NMEA 2000 equipment?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—NMEA 2000 is an open standard, so it works with devices from other brands like engines, thrusters, or third-party MFDs, as long as they follow the protocol.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How waterproof is the field-installed connection?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It achieves an IP67 rating when properly assembled, protecting against immersion up to 1 meter for 30 minutes—ideal for deck washes and splashes.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum cable length I can create with this connector?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"NMEA 2000 networks support up to 100 meters total backbone length with drops under 6 meters each. Custom cables should stay within these limits for optimal performance.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it support power insertion or T-junctions?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This is a straight male connector for end-to-end or drop connections. For power tees or junctions, pair it with Garmin's inline T-connectors.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eEquip your vessel with network flexibility that lasts—ready to tackle any wiring challenge on the water.\u003c\/p\u003e\n\u003c\/div\u003eNMEA 2000 field installable connector - male \u003cbr\u003e\u003cbr\u003eWe love outdoor sports and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31897\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11094-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078362\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536070324317,"sku":"CWR-31897","price":45.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-field-1.jpg?v=1673072626"},{"product_id":"43009-garmin-nmea-2000-field-installable-connector-female","title":"Garmin NMEA 2000 Field Installable Connector, Female","description":"NMEA 2000, Connector, Field-Installable, Female\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"product-benefits\"\u003e\n    \u003ch2\u003eSimplify Your Marine Network Setup with Precision Connectivity\u003c\/h2\u003e\n    \u003cp\u003eBoat owners and marine enthusiasts know the frustration of mismatched cable lengths on deck. This field-installable female connector steps in as a game-changer, letting you tailor NMEA 2000 drop cables and backbone extensions to fit your vessel perfectly. No more excess wiring cluttering tight spaces or risking snags—craft solutions that hug your boat's layout like they were factory-made.\u003c\/p\u003e\n    \u003cp\u003eBuilt tough for harsh saltwater environments, it seals out moisture and corrosion while ensuring rock-solid data flow between chartplotters, sensors, and transducers. Whether you're upgrading an existing setup or piecing together a new one, this connector empowers hands-on customization without specialized tools beyond basic crimpers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-uses\"\u003e\n    \u003ch2\u003eVersatile Applications for Everyday Boating Needs\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCustom Drop Cables:\u003c\/strong\u003e Extend reach to out-of-the-way transducers or instruments, keeping your helm clean and organized.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBackbone Extensions:\u003c\/strong\u003e Bridge gaps in your marine network backbone for larger boats or multi-station layouts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCable Shortening:\u003c\/strong\u003e Trim oversized stock cables to reduce weight and drag, optimizing performance on smaller crafts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eQuick Repairs:\u003c\/strong\u003e Replace damaged ends on the water or dockside, minimizing downtime during crucial outings.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eIts plug-and-play design aligns seamlessly with the NMEA 2000 standard, the backbone of modern marine electronics. This plug enables real-time sharing of GPS, depth, speed, and engine data across compatible devices, turning your boat into a smart, interconnected system.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eEffortless Field Installation for DIY Confidence\u003c\/h2\u003e\n    \u003cp\u003eGetting started is straightforward for anyone comfortable with marine wiring. Strip the cable jacket carefully, insert wires into the terminals, and crimp securely—following color-coded pins for foolproof polarity. A heat gun activates the waterproof seal, locking out the elements in seconds. Pro tip: Test continuity with a multimeter before finalizing to catch any issues early.\u003c\/p\u003e\n    \u003cp\u003eIdeal for weekend warriors maintaining personal vessels or pros servicing fleets. It pairs effortlessly with standard Garmin backbone cables, enhancing networks on everything from center consoles to offshore cruisers.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility-insights\"\u003e\n    \u003ch2\u003eBroad Compatibility Across Garmin Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eEngineered for Garmin's marine backbone cables, this connector shines in setups featuring popular chartplotters like those in the EchoMAP CHIRP series. It supports seamless integration with fishfinders, autopilots, and multifunction displays, ensuring your gear communicates flawlessly.\u003c\/p\u003e\n    \u003cp\u003eBeyond Garmin, its adherence to NMEA 2000 specs means potential cross-brand synergy—check device manuals for T-connector or terminator pairings to build robust networks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"why-garmin-connector\"\u003e\n    \u003ch2\u003eEngineered Reliability for the Long Haul\u003c\/h2\u003e\n    \u003cp\u003eGarmin's commitment to marine innovation shines through in components like this: rugged construction withstands UV exposure, vibration, and submersion. Users rave about its durability in real-world abuse—from rough tournament fishing to extended bluewater passages. Backed by Garmin's reputation for intuitive tech, it delivers peace of mind so you focus on the water, not the wiring.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is a field-installable NMEA 2000 connector used for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's designed for creating custom-length drop cables, extending backbones, or shortening existing NMEA 2000 cables in marine networks, offering flexibility for unique boat layouts.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this connector waterproof for marine use?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, once properly installed and sealed, it provides a watertight connection resistant to saltwater, moisture, and corrosion common in boating environments.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What tools do I need to install it?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Basic tools like wire strippers, a crimping tool matched to NMEA 2000 pins, and a heat source for the seal suffice. No soldering required for most setups.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with non-Garmin NMEA 2000 devices?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"As a standard NMEA 2000 component, it should integrate with compliant devices from various brands, though always verify pinouts and network requirements.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use multiple connectors on one backbone?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, NMEA 2000 networks support multiple drop cables and tees, but adhere to backbone length limits (up to 100 meters total) and power insertion guidelines for stability.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does it improve my boating experience?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"By enabling precise cable management, it reduces clutter, enhances safety by securing wires, and ensures reliable data sharing for better navigation and fishing outcomes.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is it suitable for beginners in marine electronics?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—its straightforward design makes it accessible, with color-coded wires and simple crimping minimizing errors for entry-level installers.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is a field-installable NMEA 2000 connector used for?\u003c\/summary\u003e\n        \u003cp\u003eIt's designed for creating custom-length drop cables, extending backbones, or shortening existing NMEA 2000 cables in marine networks, offering flexibility for unique boat layouts.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this connector waterproof for marine use?\u003c\/summary\u003e\n        \u003cp\u003eYes, once properly installed and sealed, it provides a watertight connection resistant to saltwater, moisture, and corrosion common in boating environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat tools do I need to install it?\u003c\/summary\u003e\n        \u003cp\u003eBasic tools like wire strippers, a crimping tool matched to NMEA 2000 pins, and a heat source for the seal suffice. No soldering required for most setups.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it work with non-Garmin NMEA 2000 devices?\u003c\/summary\u003e\n        \u003cp\u003eAs a standard NMEA 2000 component, it should integrate with compliant devices from various brands, though always verify pinouts and network requirements.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use multiple connectors on one backbone?\u003c\/summary\u003e\n        \u003cp\u003eYes, NMEA 2000 networks support multiple drop cables and tees, but adhere to backbone length limits (up to 100 meters total) and power insertion guidelines for stability.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow does it improve my boating experience?\u003c\/summary\u003e\n        \u003cp\u003eBy enabling precise cable management, it reduces clutter, enhances safety by securing wires, and ensures reliable data sharing for better navigation and fishing outcomes.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs it suitable for beginners in marine electronics?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—its straightforward design makes it accessible, with color-coded wires and simple crimping minimizing errors for entry-level installers.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101109500 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eGarmin Marine Network Backbone Cables\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eType: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFemale NMEA 2000 Field-Installable Connector\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eQuantity: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eSingle\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101109500 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFemale NMEA 2000 Field-Installable Connectors To Create Custom-Length Drop Cables And Backbone Extension Cables\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eConnectors Also Can Be Used To Shorten Any NMEA 2000 Drop\/Backbone Cable\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ™ CHIRP 52cv, 52dv, 53cv, 53dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003eNMEA 2000 field installable connector - female \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31898\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11095-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078379\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536070389853,"sku":"CWR-31898","price":49.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-field-1_51d94211-22c4-4fed-b66b-2d9e058bd1b3.jpg?v=1673072634"},{"product_id":"43010-garmin-nmea-2000-in-line-terminator","title":"Garmin NMEA 2000 In-Line Terminator","description":"NMEA 2000, Terminator, In-Line\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description-content\"\u003e\n  \u003ch2\u003eEssential Network Termination for Seamless Marine Connectivity\u003c\/h2\u003e\n  \u003cp\u003eEvery serious boater knows that a reliable marine electronics setup starts with a solid foundation. The Garmin NMEA 2000 In-Line Terminator plays that critical role, ensuring your network runs smoothly without pesky signal issues. Designed for boaters who demand precision, this compact black terminator connects right between your backbone cable and compatible devices, preventing reflections that can disrupt data flow across your chartplotters, sensors, and multifunction displays.\u003c\/p\u003e\n  \n  \u003cp\u003eUnlike basic connectors, this in-line model slips effortlessly into place, maintaining the integrity of your NMEA 2000 backbone. It's a small piece that delivers big results—think crystal-clear sonar readings, accurate GPS tracking, and uninterrupted engine data, all without the headaches of intermittent dropouts.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Proper Termination Matters on the Water\u003c\/h2\u003e\n  \u003cp\u003eNMEA 2000 networks rely on a backbone cable where devices drop in like branches on a tree trunk. But without terminators at both ends, signals bounce back like echoes in a canyon, causing errors, corrupted data, or total network failure. This Garmin terminator acts as the \"stop sign\" for those signals, absorbing them cleanly so your system communicates flawlessly.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrevents Data Corruption:\u003c\/strong\u003e Say goodbye to erratic depth readings or lost waypoints.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBoosts Reliability:\u003c\/strong\u003e Ideal for rough seas where vibrations could loosen connections.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSimplifies Expansion:\u003c\/strong\u003e Add more devices without rewiring the entire setup.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eBoaters upgrading from older NMEA 0183 systems appreciate how this terminator future-proofs their network, handling high-speed data from modern transducers and radars alike.\u003c\/p\u003e\n\n  \u003ch2\u003eStep-by-Step Installation Guide\u003c\/h2\u003e\n  \u003cp\u003eSetting it up is straightforward—no special tools required beyond what's in your standard marine toolkit:\u003c\/p\u003e\n  \u003col\u003e\n    \u003cli\u003ePower down your entire NMEA 2000 network to avoid shorts.\u003c\/li\u003e\n    \u003cli\u003eLocate the end of your backbone cable (the main T-connector or drop cable).\u003c\/li\u003e\n    \u003cli\u003ePlug the terminator directly into the open female socket, twisting until secure.\u003c\/li\u003e\n    \u003cli\u003eRoute any excess cable neatly to prevent snags, using zip ties for strain relief.\u003c\/li\u003e\n    \u003cli\u003ePower up and verify the network status light on your Garmin devices glows steady green.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \n  \u003cp\u003ePro tip: Always install matching terminators at \u003cem\u003eboth\u003c\/em\u003e ends of the backbone—one inline like this, and another at the opposite termination point—for optimal performance up to 100 meters of cable length.\u003c\/p\u003e\n\n  \u003ch2\u003eBroad Compatibility with Garmin Marine Gear\u003c\/h2\u003e\n  \u003cp\u003eThis terminator integrates seamlessly with a range of Garmin chartplotters and fishfinders, including popular EchoMAP CHIRP models. It's engineered to work hand-in-hand with Garmin's ecosystem, supporting everything from compact combo units to full helm stations. Whether you're pairing it with GPSMAP series or autopilot sensors, it ensures plug-and-play reliability that keeps you focused on the horizon, not troubleshooting.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt to Withstand Marine Demands\u003c\/h2\u003e\n  \u003cp\u003eCrafted from durable, weather-resistant materials, this black in-line terminator shrugs off saltwater spray, UV exposure, and constant submersion. It's rated for the harsh marine environment, with secure Micro-C connectors that lock in place against waves and engine vibrations. Backed by Garmin's commitment to quality, it delivers years of trouble-free service.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need two NMEA 2000 terminators for my network?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, NMEA 2000 standards require terminators at both ends of the backbone cable to properly manage signal reflection. Use this in-line version at one end and a standard terminator at the other for full coverage.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWill this terminator work with non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—it's fully compliant with the NMEA 2000 protocol, so it pairs with any certified brand like Lowrance, Simrad, or Raymarine, as long as they use standard Micro-C connectors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat happens if I forget to install a terminator?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eWithout it, your network may experience intermittent errors, slow data rates, or complete dropouts. Symptoms include flashing status lights on devices or inaccurate sensor readings.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this on longer backbone runs?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it's suitable for backbones up to the NMEA 2000 max of 100 meters (328 feet), provided you use quality cabling and power insertion every 10-20 devices.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I troubleshoot if the network isn't recognizing the terminator?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCheck for secure connections, ensure power is supplied correctly (9-16V DC), and verify no bent pins. Use Garmin's NMEA 2000 diagnostic tools in your display for deeper insights.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this terminator waterproof?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it features IP67-rated protection, making it fully submersible and resistant to corrosion in marine conditions.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need two NMEA 2000 terminators for my network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, NMEA 2000 standards require terminators at both ends of the backbone cable to properly manage signal reflection. Use this in-line version at one end and a standard terminator at the other for full coverage.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will this terminator work with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it's fully compliant with the NMEA 2000 protocol, so it pairs with any certified brand like Lowrance, Simrad, or Raymarine, as long as they use standard Micro-C connectors.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What happens if I forget to install a terminator?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Without it, your network may experience intermittent errors, slow data rates, or complete dropouts. Symptoms include flashing status lights on devices or inaccurate sensor readings.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this on longer backbone runs?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's suitable for backbones up to the NMEA 2000 max of 100 meters (328 feet), provided you use quality cabling and power insertion every 10-20 devices.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot if the network isn't recognizing the terminator?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check for secure connections, ensure power is supplied correctly (9-16V DC), and verify no bent pins. Use Garmin's NMEA 2000 diagnostic tools in your display for deeper insights.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this terminator waterproof?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it features IP67-rated protection, making it fully submersible and resistant to corrosion in marine conditions.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101109600 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eProperly Terminate An NMEA 2000 Network\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eType: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eIn-Line Terminator\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eQuantity: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eSingle\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101109600 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eUse Our Inline Terminator Between The Backbone Cable And Your Compatible Device To Correctly Terminate The Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ™ CHIRP 52cv, 52dv, 53cv, 53dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101109600 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eNMEA 2000 in-line terminator \u003cbr\u003e\u003cbr\u003eUse this serial terminator between the backbone cable and compatible equipment to correctly terminate the network. No matter where you take ocean adventures, you can easily achieve...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31899\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11096-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078430\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536070848605,"sku":"31899","price":21.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-in-1.jpg?v=1673072642"},{"product_id":"43011-garmin-nmea-0183-power-data-cable","title":"Garmin NMEA 0183 Power\/Data Cable","description":"Veh Power Cable, GPS45\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Reliable Connectivity for Your Garmin GPS 17x\u003c\/h2\u003e\n    \u003cp\u003eNavigating open waters demands precision and dependability, and the right cabling makes all the difference. Designed specifically for the Garmin GPS 17x series, this NMEA 0183 power and data cable ensures seamless power delivery and data transmission between your GPS antenna and chartplotter or multifunction display. Whether you're outfitting a fishing boat, yacht, or patrol vessel, this cable bridges the gap for uninterrupted positioning data, helping you stay on course even in rough seas.\u003c\/p\u003e\n    \u003cp\u003eUnlike generic wiring solutions, this cable meets Garmin's rigorous standards for marine environments, resisting corrosion from saltwater exposure and vibration from engine hum. It's the essential link that turns raw GPS signals into actionable navigation intelligence.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Stand Out\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRobust NMEA 0183 Protocol Support:\u003c\/strong\u003e Handles standard marine data exchange for position, speed, course, and time—perfect for integrating with legacy and modern chartplotters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower and Data in One:\u003c\/strong\u003e Single-cable setup simplifies installation, reducing clutter on deck and minimizing failure points.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Durability:\u003c\/strong\u003e Tinned copper conductors and UV-resistant jacket withstand harsh conditions, from tropical humidity to freezing spray.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Connectors:\u003c\/strong\u003e Garmin-specific fittings ensure a secure, watertight connection without soldering or custom adapters.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Flexible:\u003c\/strong\u003e Easy to route through tight spaces in consoles or bulkheads, with strain relief to prevent kinking.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese features aren't just specs—they translate to peace of mind when you're miles from shore, relying on your electronics for safe return.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility with GPS 17x Series\u003c\/h2\u003e\n    \u003cp\u003eTailored for Garmin's GPS 17x HVS antennas, including models like the 17x HVS and 17x NVS, this cable supports high-visibility satellite tracking. It pairs effortlessly with popular Garmin marine displays such as the GPSMAP series, echoMAP, and ECHOMAP UHD units. For hybrid setups, it integrates NMEA 0183 data into networks alongside NMEA 2000 devices via gateways, broadening your system's versatility.\u003c\/p\u003e\n    \u003cp\u003eUsers upgrading from older GPS 15 or 16 antennas appreciate the drop-in replacement, maintaining familiar wiring schemes while gaining enhanced signal performance.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eStep-by-Step Installation Guide\u003c\/h2\u003e\n    \u003cp\u003eSetting up this cable takes under 30 minutes with basic tools. Here's how to get it right the first time:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Down:\u003c\/strong\u003e Disconnect your boat's battery to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMount the Antenna:\u003c\/strong\u003e Secure your GPS 17x in a clear-sky view spot, away from metal obstructions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRoute the Cable:\u003c\/strong\u003e Run from antenna through a deck gland or existing conduit to your chartplotter's NMEA port, avoiding heat sources and sharp edges.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eConnect Power\/Data:\u003c\/strong\u003e Attach the cable's power leads to a switched 12V DC source (10-32V tolerant) and data wires to RX\/TX ports on your display.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSecure and Test:\u003c\/strong\u003e Use zip ties for strain relief, seal connections with dielectric grease, then power up and verify GPS fix on your screen.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003e\u003cem\u003ePro Tip:\u003c\/em\u003e Label wires at both ends for future maintenance, and test in calm conditions before heading offshore.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Choose This Cable Over Alternatives\u003c\/h2\u003e\n    \u003cp\u003eIn a sea of off-brand cables, Garmin's original stands tall. Third-party options often skimp on shielding, leading to data glitches from RF interference near VHF radios or engines. This cable's twisted-pair design rejects noise, delivering clean signals for accurate waypoints and autopilot feeds.\u003c\/p\u003e\n    \u003cp\u003eReal-world benefits include faster satellite locks during gray-sky passages and stable performance in crowded marinas with overlapping signals. Anglers report tighter trolling motor tracks, while cruisers enjoy flawless AIS overlays—proving its value in diverse scenarios.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eTips for Long-Term Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eInspect connections seasonally for corrosion; rinse with fresh water after saltwater exposure.\u003c\/li\u003e\n      \u003cli\u003eAvoid coiling excess cable tightly to prevent signal attenuation.\u003c\/li\u003e\n      \u003cli\u003ePair with a dedicated GPS fuse (1-2A) for protection against surges.\u003c\/li\u003e\n      \u003cli\u003eFor multi-station setups, use a Garmin NMEA buffer to split signals without loss.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWith proper care, this cable outlasts seasonal gear, becoming a fixture in your marine toolkit.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this cable compatible with all Garmin GPS 17x models?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it works with GPS 17x HVS, 17x NVS, and similar variants, providing both power and NMEA 0183 data connectivity.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I use this cable for NMEA 2000 systems?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's NMEA 0183 specific but can interface via a Garmin NMEA 2000 gateway for hybrid networks.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What length is the cable?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Standard length suits most installations, with flexibility for common deck-to-console runs.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it support high-voltage power sources?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It handles 10-32V DC, ideal for various marine 12V and 24V systems.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I troubleshoot no GPS signal after installation?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Check power polarity, verify RX\/TX wiring, ensure antenna has sky view, and confirm baud rate matches (typically 4800).\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this cable waterproof?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Connectors are IPX7 rated for submersion; apply marine sealant for extra protection in exposed areas.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can it replace cables on older Garmin antennas?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It fits GPS 17x directly; for older models like GPS 19x, confirm pinouts match.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this cable compatible with all Garmin GPS 17x models?\u003c\/summary\u003e\n        \u003cp\u003eYes, it works with GPS 17x HVS, 17x NVS, and similar variants, providing both power and NMEA 0183 data connectivity.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this cable for NMEA 2000 systems?\u003c\/summary\u003e\n        \u003cp\u003eIt's NMEA 0183 specific but can interface via a Garmin NMEA 2000 gateway for hybrid networks.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat length is the cable?\u003c\/summary\u003e\n        \u003cp\u003eStandard length suits most installations, with flexibility for common deck-to-console runs.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it support high-voltage power sources?\u003c\/summary\u003e\n        \u003cp\u003eIt handles 10-32V DC, ideal for various marine 12V and 24V systems.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow do I troubleshoot no GPS signal after installation?\u003c\/summary\u003e\n        \u003cp\u003eCheck power polarity, verify RX\/TX wiring, ensure antenna has sky view, and confirm baud rate matches (typically 4800).\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this cable waterproof?\u003c\/summary\u003e\n        \u003cp\u003eConnectors are IPX7 rated for submersion; apply marine sealant for extra protection in exposed areas.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan it replace cables on older Garmin antennas?\u003c\/summary\u003e\n        \u003cp\u003eIt fits GPS 17x directly; for older models like GPS 19x, confirm pinouts match.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA 0183 power\/data cable for GPS 17x \u003cbr\u003e\u003cbr\u003e\"Use this NMEA0183 power cable to provide power to your NMEA0183 network. Connects to the network with an 8-pin female connector. Wherever your marine adventures take you, this easy-to-understand, simple-to-use, and dependable electronics will help you get most out of your time on the water. Made to be tough as nails and durable, Garmin marine electronics will provide you maximum convenience, reliability and value. Built with avid boat and fishing enthusiasts in mind, innovative electronics by Garmin features a rugged construction and uses the latest technology to provide years of reliable, trouble-free performance under harshest marine conditions.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31900\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11085-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078218\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536070914141,"sku":"CWR-31900","price":40.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-0183-power-1.jpg?v=1673072651"},{"product_id":"43013-garmin-gfs-153-10-fuel-sensor-for-gas","title":"Garmin GFS\u0026#153; 10 Fuel Sensor for Gas Engines Only","description":"GFS10 Marine Fuel Sensor\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Precise Fuel Management for Your Boating Adventures\u003c\/h2\u003e\n    \u003cp\u003eImagine heading out on the water with confidence, knowing exactly how much fuel you're using and how far you can go before refueling. The Garmin GFS 10 fuel sensor makes this a reality by integrating seamlessly with your Garmin chartplotter. Designed exclusively for gas engines, this sensor monitors fuel flow in real-time, helping you fine-tune throttle settings for better efficiency and longer trips. Boaters often report noticeable improvements in fuel economy after installation, turning guesswork into data-driven decisions.\u003c\/p\u003e\n    \u003cp\u003eWhat sets it apart? While many sensors only track flow, the GFS 10 also taps into your existing analog fuel gauge or resistive tank sensor for comprehensive level monitoring. Data streams effortlessly through Garmin's CANet or the widely used NMEA 2000 network, displaying fuel rate, economy, trip consumption, and remaining range right on your screen.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFitting Type:\u003c\/strong\u003e 3\/8-inch barbed for straightforward plumbing into your fuel line.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFlow Rate Range:\u003c\/strong\u003e Handles from 2 gallons per hour (GPH) minimum up to 50 GPH maximum—perfect for most outboard gas engines.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePressure Tolerance:\u003c\/strong\u003e Rated for 0.5 PSI at 20 GPH and 1.0 PSI at 40 GPH, ensuring reliability under typical operating conditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePower Requirements:\u003c\/strong\u003e Operates on 10-22 volts, compatible with standard marine 12V systems.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e Fire-resistant design that meets U.S. Coast Guard standards for safety on the water.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eEverything you need comes in the box: mounting hardware, a built-in fuel filter to protect your engine, reusable stainless steel hose clamps, and an NMEA 2000 to CANet adapter cable for easy connectivity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features That Deliver Real-World Value\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eReal-time fuel flow tracking optimizes your boat's performance and reduces waste.\u003c\/li\u003e\n      \u003cli\u003eFuel level integration provides a complete picture without extra hardware.\u003c\/li\u003e\n      \u003cli\u003eCompatible with Garmin CANet and NMEA 2000 networks for plug-and-play setup on supported chartplotters.\u003c\/li\u003e\n      \u003cli\u003eRugged, marine-grade construction withstands harsh saltwater environments.\u003c\/li\u003e\n      \u003cli\u003eBacked by a limited 1-year warranty for peace of mind.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eCompatibility and Important Considerations\u003c\/h2\u003e\n    \u003cp\u003eThis sensor shines with carbureted gas outboards but skips diesel engines entirely and isn't suited for fuel-injected gas setups with return lines. For older GPSMAP 4xx and 5xx series chartplotters, you'll need a separate CANet kit to finalize the connection. Always verify your engine type to ensure a smooth fit—it's tailored for straightforward installs on compatible systems.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Installation for DIY Boaters\u003c\/h2\u003e\n    \u003cp\u003eSetting up the GFS 10 is straightforward for those familiar with basic marine plumbing. Inline installation between your fuel tank and engine involves cutting the fuel line, inserting the sensor with its barbed fittings, and securing with the included clamps and filter. Wire it to power, connect via NMEA 2000 or CANet, and configure through your chartplotter's menu. Most users complete it in under an hour, gaining instant access to fuel insights that enhance every outing.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Position the sensor horizontally or slightly downward for accurate readings, and prime the system carefully to avoid air bubbles.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy Boaters Trust the GFS 10 for Superior Fuel Insights\u003c\/h2\u003e\n    \u003cp\u003eUnlike basic flow meters, this sensor delivers actionable data like gallons per hour, miles per gallon, and estimated range—vital for planning multi-day cruises or fishing trips. Integrate it with Garmin's ecosystem, and you'll unlock advanced features such as trip logging and engine sync. It's not just about saving fuel; it's about smarter boating that keeps you on the water longer.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is the Garmin GFS 10 compatible with diesel engines?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"No, the GFS 10 is designed exclusively for gas engines and does not support diesel applications.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can the GFS 10 monitor fuel tank levels?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it includes fuel level sensing when paired with an existing analog fuel gauge or resistive tank sensor.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is the fuel flow range for this sensor?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It supports a minimum of 2 gallons per hour up to a maximum of 50 gallons per hour, ideal for most recreational boats.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with NMEA 2000 chartplotters?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely, it connects via NMEA 2000 or Garmin CANet, with an adapter included for versatility.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What accessories are included with the GFS 10?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It comes complete with mounting hardware, a fuel filter, stainless steel hose clamps, and an NMEA 2000 to CANet adapter cable.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is installation complicated for beginners?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Not at all—it's a simple inline fuel line install with provided fittings and clamps, typically done in under an hour.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What chartplotters require extra parts for compatibility?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"GPSMAP 4xx and 5xx series units need a separate CANet kit for full connectivity.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the Garmin GFS 10 compatible with diesel engines?\u003c\/summary\u003e\n        \u003cp\u003eNo, the GFS 10 is designed exclusively for gas engines and does not support diesel applications.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan the GFS 10 monitor fuel tank levels?\u003c\/summary\u003e\n        \u003cp\u003eYes, it includes fuel level sensing when paired with an existing analog fuel gauge or resistive tank sensor.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat is the fuel flow range for this sensor?\u003c\/summary\u003e\n        \u003cp\u003eIt supports a minimum of 2 gallons per hour up to a maximum of 50 gallons per hour, ideal for most recreational boats.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it work with NMEA 2000 chartplotters?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely, it connects via NMEA 2000 or Garmin CANet, with an adapter included for versatility.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat accessories are included with the GFS 10?\u003c\/summary\u003e\n        \u003cp\u003eIt comes complete with mounting hardware, a fuel filter, stainless steel hose clamps, and an NMEA 2000 to CANet adapter cable.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation complicated for beginners?\u003c\/summary\u003e\n        \u003cp\u003eNot at all—it's a simple inline fuel line install with provided fittings and clamps, typically done in under an hour.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat chartplotters require extra parts for compatibility?\u003c\/summary\u003e\n        \u003cp\u003eGPSMAP 4xx and 5xx series units need a separate CANet kit for full connectivity.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eAdd fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet ® or NMEA 2000 ®. Unlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connected to an existing analog fuel gauge or resistive fuel tank sensor. Maximum fuel flow rate for the GFS 10 is 50 Gallon Per hour, and the minimum flow rate is 2 Gallon Per Hour.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 100067100 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTrack Fuel Flow And Sends The Data To Chart Plotters\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFitting Type: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3\/8 Inch Barbed\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFlow Rate: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e2 Gallons Per Hour\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePressure Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0.5 PSI At 20 Gallons Per Hour\/ 1.0 PSI At 40 Gallons Per Hour\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eInput Voltage: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e10 To 22 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCertified: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eU.S. Coast Guard Approved\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eMounting Hardware\/Fuel Filter\/Reusable Stainless Steel Hose Clamp\/NMEA2000 To CANet Adapter Cable\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 100067100 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eAdd Fuel Tracking Capabilities To Your Garmin Chartplotter And Optimize Your Boat's Fuel Economy\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGFS 10 Tracks Fuel Flow Use And Sends The Data To Your Chartplotter Via The Garmin CANet ® Or NMEA 2000\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDesign: 3\/8 Inch Barbed Fittings\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFire Resistant And Complies With U.S. Coast Guard Standards\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 100067100 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US%20(5).pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US (5).pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GFS10FuelSensor_QuickReferenceGuideMulti-lingual.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGFS10FuelSensor_QuickReferenceGuideMulti-lingual.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/ISPI_Marine_15.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eISPI_Marine_15.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GFS_10_Install_Multi.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGFS_10_Install_Multi.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GFS10FuelSensor_SensorConfiguration.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGFS10FuelSensor_SensorConfiguration.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100067100 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eGFS™ 10 Fuel Sensor\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAdd fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000.\u003cbr\u003e\u003cbr\u003eUnlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connected to an existing analog fuel gauge or resistive fuel tank sensor. Maximum fuel flow rate for the GFS 10 is 50 gallons per hour, and the minimum flow rate is two gallons per hour. \u003cbr\u003e\u003cbr\u003eNote:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eGPSMAP 4xx and 5xx series CANet compatible units require a CANet kit to complete the connection.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe GFS 10 does not work with diesel engines.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe GFS 10 does not work with fuel injected gas engines with a fuel return line.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003e\"GFS 10 Fuel SensorAdd fuel tracking capabilities to your Garmin chartplotter and optimize your boat's fuel economy. The GFS 10 tracks fuel flow use and sends the data to your chartplotter via the Garmin CANet or NMEA 2000. Unlike other fuel flow sensors, the GFS 10 will include fuel level sensing capability when connected to an existing analog fuel gauge or resistive fuel tank sensor.  Note: GPSMAP 4xx and 5xx series CANet compatible units require a CANet kit to complete the connection. The GFS 10 does not work with diesel engines. The GFS 10 does not work with fuel injected gas engines with a fuel return line.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31902\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-00671-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759076337\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071012445,"sku":"CWR-31902","price":167.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gfs-153-10-1.jpg?v=1673072659"},{"product_id":"43014-garmin-intelliducer-nmea-2000-thru-hull","title":"Garmin Intelliducer NMEA 2000 - Thru-hull - 0-12\u0026#176; Deadrise","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eUpgrade your vessel's sonar capabilities with the Garmin Intelliducer NMEA 2000 thru-hull transducer, designed specifically for hulls with 0-12° deadrise angles. This intelligent sensor seamlessly integrates into your Garmin marine network, delivering precise water depth and temperature readings directly to your chartplotter or digital display. Whether you're navigating shallow coastal waters, tracking fish in deep offshore zones up to 900 feet, or monitoring conditions during long cruises, this thru-hull mount provides reliable data without the clutter of traditional wiring.\u003c\/p\u003e\n    \n    \u003cp\u003eCrafted for boaters who demand accuracy and simplicity, the Intelliducer stands out by automatically detecting and transmitting essential sonar information over NMEA 2000. No more guesswork—get real-time insights that enhance safety, improve angling success, and optimize your time on the water.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters Choose the Garmin Intelliducer Thru-Hull Transducer\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCrystal-Clear Depth and Temp Data:\u003c\/strong\u003e Captures readings down to 900 feet with 150-watt power, perfect for everything from inland lakes to open ocean expeditions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless NMEA 2000 Integration:\u003c\/strong\u003e Plug into your existing Garmin ecosystem for instant compatibility with chartplotters like the GPSMAP series or multifunction displays.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eVersatile Hull Mounting:\u003c\/strong\u003e Tailored for 0-12° deadrise, ensuring optimal beam angle and minimal turbulence interference on common fiberglass hulls.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Durability:\u003c\/strong\u003e Built to withstand harsh marine environments, with a robust housing that resists corrosion and impact.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStreamlined Installation:\u003c\/strong\u003e Includes all necessary components for a clean, professional setup without extensive hull modifications.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"technical-specs\"\u003e\n    \u003ch2\u003ePerformance Specifications at a Glance\u003c\/h2\u003e\n    \u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 20px;\"\u003e\n      \u003cthead\u003e\n        \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n          \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #ddd;\"\u003eSpecification\u003c\/th\u003e\n          \u003cth style=\"padding: 12px; text-align: left; border: 1px solid #ddd;\"\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eMount Type\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eThru-Hull\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eMax Depth\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e900 feet\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003ePower Output\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e150 Watts\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eFrequency\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e160 kHz\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eDeadrise Range\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e0-12°\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003eCable Length\u003c\/td\u003e\n          \u003ctd style=\"padding: 12px; border: 1px solid #ddd;\"\u003e20 feet\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003cp\u003eThese specs make it ideal for mid-sized powerboats, sailboats, and fishing vessels where space and performance matter most.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eSimple Step-by-Step Installation Tips\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlan Your Location:\u003c\/strong\u003e Select a spot on the hull with 0-12° deadrise, forward of the propellers, and away from strakes for the cleanest water flow.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDrill and Mount:\u003c\/strong\u003e Use the included top and bottom housings, gasket, and locking ring for a watertight seal. Fair the housing to match your hull angle precisely.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eConnect to NMEA 2000:\u003c\/strong\u003e Route the 20-foot cable to your network backbone using the provided T-connector. Power it from your 12V system.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTest and Calibrate:\u003c\/strong\u003e Power up your Garmin display, verify depth and temperature readings, and adjust keel offset if needed for pinpoint accuracy.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSecure Everything:\u003c\/strong\u003e Apply marine sealant around the thru-hull fitting and double-check all connections for vibration resistance.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eMost installations take under an hour for experienced DIYers, turning your boat into a smarter navigator without professional help.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-applications\"\u003e\n    \u003ch2\u003eReal-World Scenarios Where It Shines\u003c\/h2\u003e\n    \u003cdiv class=\"scenario-grid\" style=\"display: grid; grid-template-columns: repeat(auto-fit, minmax(300px, 1fr)); gap: 20px; margin: 20px 0;\"\u003e\n      \u003cdiv class=\"scenario\"\u003e\n        \u003ch3\u003eFishing Enthusiasts\u003c\/h3\u003e\n        \u003cp\u003eSpot structure and bait balls with reliable depth data, while temperature readings help locate thermoclines for trophy catches.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"scenario\"\u003e\n        \u003ch3\u003eCruisers and Liveaboards\u003c\/h3\u003e\n        \u003cp\u003eMonitor depths in unfamiliar anchorages and track water temps for engine cooling or diver safety.\u003c\/p\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"scenario\"\u003e\n        \u003ch3\u003eRacers and Day Sailors\u003c\/h3\u003e\n        \u003cp\u003eGet instant feedback on draft and current shifts to fine-tune your course and avoid groundings.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"whats-included\"\u003e\n    \u003ch2\u003eComplete Kit Contents\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eThru-hull Intelliducer (top and bottom assemblies)\u003c\/li\u003e\n      \u003cli\u003eGasket and locking ring for secure sealing\u003c\/li\u003e\n      \u003cli\u003ePower\/data cable (NMEA 2000 compatible)\u003c\/li\u003e\n      \u003cli\u003eNMEA 2000 T-connector for easy network integration\u003c\/li\u003e\n      \u003cli\u003eDetailed installation instructions\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What hull deadrise angles does the Garmin Intelliducer support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This thru-hull transducer is optimized for hulls with 0-12° deadrise, ensuring accurate readings without signal distortion.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it provide both depth and temperature data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it intelligently measures water depth up to 900 feet and temperature, sending both via NMEA 2000 to compatible Garmin displays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this transducer compatible with all Garmin chartplotters?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works seamlessly with Garmin devices that support NMEA 2000 networks, such as GPSMAP and ECHOMAP series.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum depth capability?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It reliably performs down to 900 feet, suitable for most recreational and offshore boating needs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable included?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The kit includes a 20-foot cable, providing ample length for most boat installations.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I install this myself?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely— the kit includes everything needed, and basic tools suffice for a straightforward thru-hull setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What frequency does it operate on?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It uses a 160 kHz frequency for balanced resolution and depth penetration.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003c!-- FAQs rendered as accordion or list for UX; schema handles SEO --\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat hull deadrise angles does the Garmin Intelliducer support?\u003c\/summary\u003e\n        \u003cp\u003eThis thru-hull transducer is optimized for hulls with 0-12° deadrise, ensuring accurate readings without signal distortion.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes it provide both depth and temperature data?\u003c\/summary\u003e\n        \u003cp\u003eYes, it intelligently measures water depth up to 900 feet and temperature, sending both via NMEA 2000 to compatible Garmin displays.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs this transducer compatible with all Garmin chartplotters?\u003c\/summary\u003e\n        \u003cp\u003eIt works seamlessly with Garmin devices that support NMEA 2000 networks, such as GPSMAP and ECHOMAP series.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's the maximum depth capability?\u003c\/summary\u003e\n        \u003cp\u003eIt reliably performs down to 900 feet, suitable for most recreational and offshore boating needs.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the cable included?\u003c\/summary\u003e\n        \u003cp\u003eThe kit includes a 20-foot cable, providing ample length for most boat installations.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I install this myself?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—the kit includes everything needed, and basic tools suffice for a straightforward thru-hull setup.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat frequency does it operate on?\u003c\/summary\u003e\n        \u003cp\u003eIt uses a 160 kHz frequency for balanced resolution and depth penetration.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Maintenance for Peak Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003eWipe the transducer face regularly to remove marine growth.\u003c\/li\u003e\n      \u003cli\u003eInspect cable connections seasonally for wear.\u003c\/li\u003e\n      \u003cli\u003eStore your boat with the hull protected from extreme temperatures.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eWith proper care, this Intelliducer delivers years of dependable service, keeping you connected to the water's secrets.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 100070100 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e900 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e150 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e160 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e8 To 16 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 100070100 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIntelliducer Enhances Your Boat's Marine Instrumentation Capabilities By Providing Both Depth And Temperature Data To Your NMEA 2000 Garmin Digital Marine Display Or Chartplotter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e150 Watt Thru-Hull Mount Has A Maximum Depth Of 900 Feet\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMounts On A 8 To 16 Degree Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransducer Kit Features Installation Instructions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 100070100 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/2462_Thru-hullIntelliducerInstructions_Multilingual_.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2462_Thru-hullIntelliducerInstructions_Multilingual_.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070100 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070100 Technical Bulletins\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/TechnicalBulletins\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eIntelliducer, NMEA 2000, Thru-Hull\u003c\/b\u003e\u003cbr\u003e0-12° deadrise\u003cbr\u003e\u003cbr\u003eAdd sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 0-12° deadrise angle. \u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\"Enhance your boat's marine instrumentation capabilities. This versatile thru-hull sensor provides depth and water temperature data and sends it to your NMEA 2000 Garmin digital marine instrument display or chartplotter. This thru-hull version mounts on a 0-12\\u00b0 deadrise angle. Compatible with most 4xxx and 5xxx series Garmin chartplotters. Includes Intelliducer, gasket and locking ring, power and data cable, and NMEA 2000 T-connector and terminators. Can track a bottom depth of up to 600 feet.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31903\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-00701-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759076092\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071077981,"sku":"CWR-31903","price":191.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-intelliducer-nmea-2000-1.jpg?v=1673072667"},{"product_id":"43016-garmin-intelliducer-tm-nmea-2000-depth","title":"Garmin Intelliducer TM NMEA 2000 Depth \u0026 Temp","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eUnlock Precise Depth and Temperature Insights on the Water\u003c\/h2\u003e\n    \u003cp\u003eImagine gliding across open waters with real-time data that keeps you one step ahead of changing conditions. The Garmin Intelliducer transom-mount transducer delivers exactly that, seamlessly feeding accurate depth and water temperature readings directly into your NMEA 2000 network. Designed for boaters who demand reliability without complexity, this intelligent sensor transforms your Garmin marine display or chartplotter into a powerhouse of navigational intelligence.\u003c\/p\u003e\n    \u003cp\u003eWhether you're navigating shallow bays, tracking fish in deeper zones, or monitoring environmental shifts, this transducer stands out by combining rugged durability with plug-and-play simplicity. Its 150-watt power handles depths up to 900 feet, while the 160 kHz frequency ensures crisp returns even in turbulent conditions. Mount it on transoms angled from 0 to 22 degrees, and enjoy the freedom of a 20-foot cable that reaches where you need it.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eSeamless NMEA 2000 Integration for Smarter Boating\u003c\/h2\u003e\n    \u003cp\u003eWhat sets this Intelliducer apart is its native compatibility with the NMEA 2000 protocol, the marine industry's gold standard for data sharing. No more guesswork or manual inputs—depth and temp data flow effortlessly to compatible Garmin multifunction displays, allowing you to overlay sonar-like precision onto charts, autopilot systems, and even engine monitors.\u003c\/p\u003e\n    \u003cp\u003eBoaters report sharper situational awareness, especially during low-light dawn patrols or foggy approaches to unfamiliar harbors. The temperature sensing adds value for anglers, revealing thermoclines where baitfish school, or for safety-conscious skippers tracking hypothermia risks in cooler waters.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eEffortless Transom Mounting for Lasting Performance\u003c\/h2\u003e\n    \u003cp\u003eInstallation boils down to straightforward steps: select a clean, stable spot on your transom within the recommended angle range, drill precisely, and secure with provided hardware. The self-aligning design minimizes dead zones and cavitation, ensuring consistent readings from idle to planing speeds.\u003c\/p\u003e\n    \u003cp\u003ePro tip: Pair it with marine sealant around the mount to fend off corrosion in saltwater environments. Once connected to your NMEA 2000 backbone via the included drop cable, calibration takes seconds through your Garmin unit's intuitive menu—adjust for waterline height and you're set for seasons of trouble-free operation.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eReal-World Advantages Beyond the Specs\u003c\/h2\u003e\n    \u003cp\u003eOwners praise its sensitivity in varied bottoms—from muddy riverbeds to rocky coastlines—delivering reliable bottom-lock even at 30+ knots. The compact footprint avoids drag, preserving your boat's hull speed and fuel economy. In competitive fishing circuits, it's a quiet hero, piping data that helps dial in lure depths without constant rod checks.\u003c\/p\u003e\n    \u003cp\u003eFor weekend warriors, the peace of mind from knowing your exact clearance under the keel turns potential groundings into confident cruises. And with Garmin's reputation for marine toughness, it shrugs off vibrations, spray, and submersion like a seasoned pro.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eMaintenance and Longevity Tips\u003c\/h2\u003e\n    \u003cp\u003eKeep it thriving with simple routines: rinse after every saltwater outing to clear salt buildup, inspect the face for marine growth quarterly, and store dry during off-seasons. Avoid high-pressure washes directly on the ceramic element to prevent micro-cracks. Regular NMEA 2000 network checks ensure data integrity, catching loose connections early.\u003c\/p\u003e\n    \u003cp\u003eMany users see years of peak performance with minimal intervention, making it a smart investment for anyone serious about marine electronics.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility with Your Garmin Setup\u003c\/h2\u003e\n    \u003cp\u003eThis transducer shines brightest in Garmin ecosystems—think GPSMAP series, echoMAP chartplotters, or ECHOMAP UHD models with NMEA 2000 ports. It auto-populates as a depth\/temp source, integrating with existing sensors for a unified dashboard view. Even legacy NMEA 2000 gear from other brands plays nice, broadening its appeal for mixed-system boats.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What kind of boats is the Garmin Intelliducer best suited for?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"It's ideal for trailered powerboats, center consoles, and smaller offshore vessels with transoms angled 0-22 degrees. Perfect for freshwater lakes or coastal saltwater use where reliable depth and temp data enhance safety and fishing success.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How deep can this transducer accurately measure?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Up to 900 feet maximum, with strong performance down to 800 feet in optimal conditions. Factors like boat speed, water clarity, and bottom type influence real-world limits.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Does it work with non-Garmin NMEA 2000 devices?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, it outputs standard NMEA 2000 PGNs for depth (PGN 128267) and temperature (PGN 130311), compatible with most marine MFDs and black boxes from brands like Simrad, Lowrance, or Raymarine.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can I install it myself, or do I need a professional?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"DIY-friendly for handy boaters with basic tools. Key is precise hole placement and secure bedding. Pros recommend it for larger hulls or if you're unsure about transom integrity.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my transom angle is outside 0-22 degrees?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Use a wedge shim kit for steeper angles, or opt for thru-hull alternatives. Always verify deadrise compatibility to avoid erratic readings.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How does water temperature data help on the boat?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Spot baitfish concentrations via thermoclines, adjust engine trim for efficiency in varying densities, or monitor for diver safety. Integrates with Garmin's fish prediction features for smarter outings.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is it affected by boat wake or prop wash?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Minimal interference thanks to its position below the hull line and tuned frequency. Mount aft of props and trim tabs for cleanest signals at speed.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat kind of boats is the Garmin Intelliducer best suited for?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eIt's ideal for trailered powerboats, center consoles, and smaller offshore vessels with transoms angled 0-22 degrees. Perfect for freshwater lakes or coastal saltwater use where reliable depth and temp data enhance safety and fishing success.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow deep can this transducer accurately measure?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eUp to 900 feet maximum, with strong performance down to 800 feet in optimal conditions. Factors like boat speed, water clarity, and bottom type influence real-world limits.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it work with non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eYes, it outputs standard NMEA 2000 PGNs for depth (PGN 128267) and temperature (PGN 130311), compatible with most marine MFDs and black boxes from brands like Simrad, Lowrance, or Raymarine.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan I install it myself, or do I need a professional?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eDIY-friendly for handy boaters with basic tools. Key is precise hole placement and secure bedding. Pros recommend it for larger hulls or if you're unsure about transom integrity.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if my transom angle is outside 0-22 degrees?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eUse a wedge shim kit for steeper angles, or opt for thru-hull alternatives. Always verify deadrise compatibility to avoid erratic readings.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow does water temperature data help on the boat?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eSpot baitfish concentrations via thermoclines, adjust engine trim for efficiency in varying densities, or monitor for diver safety. Integrates with Garmin's fish prediction features for smarter outings.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it affected by boat wake or prop wash?\u003c\/h3\u003e\n        \u003cdiv itemprop=\"acceptedAnswer\"\u003e\n          \u003cp\u003eMinimal interference thanks to its position below the hull line and tuned frequency. Mount aft of props and trim tabs for cleanest signals at speed.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 100070300 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eTransom Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e900 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e150 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e160 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e0 To 22 Degree Transom Angle\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 100070300 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIntelliducer Enhances Your Boat's Marine Instrumentation Capabilities By Providing Both Depth And Temperature Data To Your NMEA 2000 Garmin Digital Marine Display Or Chartplotter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e150 Watt Thru-Hull Mount Has A Maximum Depth Of 900 Feet\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMounts On A 0 To 22 Degree Transom\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransducer Kit Features Installation Instructions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 100070300 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/MarineIntelliducers_TransomMountInstallation.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eMarineIntelliducers_TransomMountInstallation.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/ISPI_Marine_15.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eISPI_Marine_15.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070300 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070300 Technical Bulletins\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/TechnicalBulletins\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eIntelliducer, Transom, NMEA 2000\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAdd sonar to your boat's marine instrumentation capabilities. This transom-mount intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device.\u003cbr\u003e \u003cbr\u003e\u003cbr\u003eEnhance the functions of your marine marine instrumentation. This versatile tail-mounted sensor provides depth and water temperature data and sends this data to your NMEA 2000.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31905\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-00703-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759076139\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071143517,"sku":"CWR-31905","price":168.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-intelliducer-tm-nmea-1.jpg?v=1673072674"},{"product_id":"43017-garmin-intelliducer-nmea-2000-thru-hull","title":"Garmin Intelliducer NMEA 2000 - Thru-Hull - 13-24\u0026#176; Deadrise","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eUpgrade your boating experience with a reliable thru-hull transducer designed for seamless integration into your marine electronics setup. This intelligent sensor captures precise water depth and temperature readings, delivering them directly to your NMEA 2000 network for real-time display on compatible chartplotters and instruments. Perfect for vessels with hulls featuring a 13 to 24-degree deadrise, it ensures accurate performance without the guesswork of traditional sonar setups.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlock Superior On-Water Awareness\u003c\/h2\u003e\n  \u003cp\u003eImagine navigating shallow bays, tracking fish in deeper waters, or monitoring water conditions during long cruises—all with data that's automatically calibrated and network-ready. Unlike basic transducers that require manual configuration, this smart device self-adjusts to provide clean, dependable sonar returns. Boaters praise its ability to cut through clutter, offering clearer bottom contours and reliable temperature insights that help with everything from route planning to engine performance monitoring.\u003c\/p\u003e\n  \u003cp\u003eIn real-world scenarios, such as coastal fishing or weekend yachting, having instant access to depth up to 900 feet means avoiding hidden hazards and maximizing your time on the water. Its 150-watt power output punches through varying water conditions, while the 160 kHz frequency delivers focused beams ideal for most recreational and light commercial applications.\u003c\/p\u003e\n\n  \u003ch2\u003eTechnical Edge for Serious Boaters\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMounting Flexibility:\u003c\/strong\u003e Tailored for thru-hull installation on hulls with 13-24° deadrise angles, ensuring flush fitting and minimal drag.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRobust Reach:\u003c\/strong\u003e Tracks depths to 900 feet, suitable for offshore adventures.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower and Precision:\u003c\/strong\u003e 150-watt RMS power with a 20-foot cable for straightforward routing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDual Sensing:\u003c\/strong\u003e Combines depth and water temperature for comprehensive environmental data.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eThese specs aren't just numbers—they translate to fewer false readings and more confidence behind the helm, especially in choppy seas where hull angle matters most.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless NMEA 2000 Connectivity\u003c\/h2\u003e\n  \u003cp\u003ePlug into your existing Garmin marine network and watch the data flow. This transducer communicates via NMEA 2000, populating your multifunction displays with depth, temp, and even speed-over-ground overlays if networked with other sensors. It's a game-changer for upgrading older systems without ripping out wiring, keeping your cockpit clutter-free and information centralized.\u003c\/p\u003e\n  \u003cp\u003eFor those new to marine networks, NMEA 2000 acts like a digital backbone, sharing data across devices. This unit auto-identifies on the bus, simplifying setup and reducing troubleshooting time compared to analog alternatives.\u003c\/p\u003e\n\n  \u003ch2\u003eStreamlined Installation Tips\u003c\/h2\u003e\n  \u003cp\u003eInstalling a thru-hull transducer might sound intimidating, but this model's design prioritizes ease. Start by selecting a spot on the hull forward of the prop and keel, matching your deadrise angle for optimal beam projection. Drill precisely, bed with marine sealant, and secure using the provided hardware. Route the 20-foot cable away from electrical noise sources, then drop in the NMEA 2000 T-connector for instant network access.\u003c\/p\u003e\n  \u003cp\u003ePro tip: Test in shallow water post-install to verify bottom lock and calibrate if needed. Regular hull cleaning prevents marine growth from degrading performance, extending the sensor's lifespan in saltwater environments.\u003c\/p\u003e\n\n  \u003ch2\u003eComplete Kit for Quick Setup\u003c\/h2\u003e\n  \u003cp\u003eEverything you need arrives ready to mount:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eThru-hull Intelliducer assembly (top and bottom halves)\u003c\/li\u003e\n    \u003cli\u003eGasket and locking ring for watertight seals\u003c\/li\u003e\n    \u003cli\u003ePower\/data cable with NMEA 2000 compatibility\u003c\/li\u003e\n    \u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n    \u003cli\u003eStep-by-step mounting guide\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What data does the Garmin Intelliducer provide?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It delivers accurate water depth measurements up to 900 feet and real-time water temperature readings, transmitted over your NMEA 2000 network for display on compatible devices.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which hull deadrise angles are supported?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed for thru-hull mounting on hulls with 13 to 24-degree deadrise angles, ensuring proper sonar beam projection and minimal distortion.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the maximum depth capability?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This 150-watt transducer reliably measures depths down to 900 feet, making it suitable for both inshore and offshore boating.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does it integrate with Garmin chartplotters?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It connects via NMEA 2000, auto-detecting on the network to share depth and temperature data with Garmin chartplotters, instruments, and multifunction displays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is DIY installation feasible for this transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, with included hardware and instructions, most boaters can handle thru-hull installation. Focus on hull prep, sealant application, and clean cable routing for best results.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What cable length is included?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"A 20-foot power\/data cable provides ample length for routing from the hull to your helm station or network backbone.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work in saltwater environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, built with marine-grade materials to withstand corrosion and fouling in both fresh and saltwater conditions.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat data does the Garmin Intelliducer provide?\u003c\/h3\u003e\n      \u003cp\u003eIt delivers accurate water depth measurements up to 900 feet and real-time water temperature readings, transmitted over your NMEA 2000 network for display on compatible devices.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhich hull deadrise angles are supported?\u003c\/h3\u003e\n      \u003cp\u003eDesigned for thru-hull mounting on hulls with 13 to 24-degree deadrise angles, ensuring proper sonar beam projection and minimal distortion.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the maximum depth capability?\u003c\/h3\u003e\n      \u003cp\u003eThis 150-watt transducer reliably measures depths down to 900 feet, making it suitable for both inshore and offshore boating.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does it integrate with Garmin chartplotters?\u003c\/h3\u003e\n      \u003cp\u003eIt connects via NMEA 2000, auto-detecting on the network to share depth and temperature data with Garmin chartplotters, instruments, and multifunction displays.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs DIY installation feasible for this transducer?\u003c\/h3\u003e\n      \u003cp\u003eYes, with included hardware and instructions, most boaters can handle thru-hull installation. Focus on hull prep, sealant application, and clean cable routing for best results.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat cable length is included?\u003c\/h3\u003e\n      \u003cp\u003eA 20-foot power\/data cable provides ample length for routing from the hull to your helm station or network backbone.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes it work in saltwater environments?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely, built with marine-grade materials to withstand corrosion and fouling in both fresh and saltwater conditions.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eEquip your boat with this essential upgrade and gain the edge in navigation and safety. Its intelligent design means less maintenance and more enjoyment on every outing.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 100070101 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e900 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e150 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e160 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e13 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 100070101 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIntelliducer Enhances Your Boat's Marine Instrumentation Capabilities By Providing Both Depth And Temperature Data To Your NMEA 2000 Garmin Digital Marine Display Or Chartplotter\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e150 Watt Thru-Hull Mount Has A Maximum Depth Of 900 Feet\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eMounts On A 13 To 24 Degree Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransducer Kit Features Installation Instructions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 100070101 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/2462_Thru-hullIntelliducerInstructions_Multilingual_.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e2462_Thru-hullIntelliducerInstructions_Multilingual_.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070101 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 100070101 Technical Bulletins\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/TechnicalBulletins\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eIntelliducer, Thru-Hull, NMEA 2000\u003c\/b\u003e\u003cbr\u003e13-24° Deadrise\u003cbr\u003e\u003cbr\u003eAdd sonar to your boat's marine instrumentation capabilities. This intelligent transducer determines water depth and temperature and sends the data to your NMEA 2000 device. This thru-hull version mounts on a 13-24° deadrise angle. \u003cbr\u003e \u003cbr\u003e\u003cbr\u003eEnhance the functions of your marine marine instrumentation. This versatile hull sensor provides depth and water temperature data and sends it to your NMEA 2000 Garmin digital sensor.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31906\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-00701-01\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759076108\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071241821,"sku":"CWR-31906","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-intelliducer-nmea-2000-1_79c7766d-c68d-4b3d-afe3-2fa50b198213.jpg?v=1673072694"},{"product_id":"43025-garmin-nmea-0183-cable-right-angle","title":"Garmin NMEA 0183 Cable - Right Angle","description":"\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eUnlock Seamless Marine Connectivity with the Garmin Right-Angle NMEA 0183 Cable\u003c\/h2\u003e\n  \u003cp\u003eNavigating the open water demands reliable communication between your marine electronics. The Garmin right-angle NMEA 0183 cable steps in as a compact powerhouse, designed to link your Garmin chartplotter or multifunction display to other NMEA 0183-compatible devices like VHF radios, AIS transponders, or autopilots. Its clever right-angle design hugs tight spaces behind your helm, preventing cable clutter and reducing wear from constant flexing.\u003c\/p\u003e\n  \n  \u003cp\u003eUnlike straight cables that stick out awkwardly, this accessory keeps your setup tidy and professional-looking, whether you're on a sleek yacht or a rugged fishing boat. Built to Garmin's exacting standards, it ensures data flows uninterrupted—think precise GPS positions, speed logs, and depth readings shared effortlessly across your network.\u003c\/p\u003e\n\n  \u003ch2\u003eStandout Features for Everyday Boaters\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRight-Angle Connector:\u003c\/strong\u003e Fits flush in confined console areas, saving precious dash real estate.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Marine-grade materials resist corrosion, UV exposure, and saltwater splashes for years of dependable service.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e No soldering or custom wiring—just connect and configure via your Garmin unit's menu.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStandard NMEA 0183 Protocol:\u003c\/strong\u003e Supports talker\/listener setups for bi-directional data exchange.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact Length:\u003c\/strong\u003e Optimized for short runs, minimizing signal noise in high-vibration environments.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect Compatibility Across Garmin Lineup\u003c\/h2\u003e\n  \u003cp\u003eThis cable pairs seamlessly with a wide array of Garmin marine devices, from popular GPSMAP series chartplotters to echoMAP fishfinders and beyond. It's the go-to choice for expanding networks on models featuring dedicated NMEA ports. Boaters often use it to bridge Garmin units with third-party gear, creating a unified system that boosts situational awareness on the water.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: Double-check your device's I\/O manual for port labels—typically marked as \"NMEA In\/Out\" or serial data connectors—to ensure a flawless match.\u003c\/p\u003e\n\n  \u003ch3\u003eInstallation in Minutes: A Step-by-Step Guide\u003c\/h3\u003e\n  \u003col\u003e\n    \u003cli\u003ePower down all connected devices to avoid electrical glitches.\u003c\/li\u003e\n    \u003cli\u003eLocate the NMEA ports on your Garmin unit (usually on the rear panel).\u003c\/li\u003e\n    \u003cli\u003eAlign the right-angle plug with the port and gently push until secure—listen for the click.\u003c\/li\u003e\n    \u003cli\u003eRoute the cable neatly using zip ties or cable clips to prevent snags.\u003c\/li\u003e\n    \u003cli\u003eConnect the opposite end to your peripheral device (e.g., VHF's NMEA input).\u003c\/li\u003e\n    \u003cli\u003ePower up, then access your Garmin's communication settings to enable NMEA 0183 sentences like GGA, RMC, or VTG.\u003c\/li\u003e\n    \u003cli\u003eTest by verifying data appears on linked screens—position, SOG, COG should populate quickly.\u003c\/li\u003e\n  \u003c\/ol\u003e\n  \u003cp\u003eStuck on config? Garmin's intuitive interfaces make tweaking baud rates (typically 4800 bps) a breeze, ensuring compatibility with legacy and modern gear alike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Boaters Swear by This Cable\u003c\/h2\u003e\n  \u003cp\u003eIn the salty, sun-baked world of boating, connections fail when you need them most. This Garmin cable changes that with rock-solid reliability, eliminating dropouts during critical maneuvers. Anglers love sharing sonar data with plotters; cruisers integrate it for autopilot feeds; safety pros chain it into alarm systems. It's not just wire—it's your bridge to a smarter, safer voyage.\u003c\/p\u003e\n  \n  \u003cp\u003eCompared to generic cables, Garmin's version delivers cleaner signals and longer life, dodging issues like intermittent data or corrosion-induced shorts. Real-world feedback from offshore racers highlights its edge in rough conditions, where every byte counts.\u003c\/p\u003e\n\n  \u003ch2\u003ePro Tips for Peak Performance and Longevity\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eShield from Elements:\u003c\/strong\u003e Tuck connections inside weatherproof enclosures for extra protection.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAvoid Overloading:\u003c\/strong\u003e Limit to one listener per talker to prevent bus conflicts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eUpgrade Sentences:\u003c\/strong\u003e Enable HDG for better compass integration or DBT for depth sharing.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTroubleshoot Smartly:\u003c\/strong\u003e If data lags, swap baud rates or test with a multimeter for continuity.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFuture-Proof:\u003c\/strong\u003e Ready for NMEA 2000 gateways if you expand your network later.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices is the Garmin right-angle NMEA 0183 cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It works with most Garmin marine chartplotters, fishfinders, and MFDs featuring NMEA 0183 ports, including GPSMAP, echoMAP, and Striker series. Always verify your model's I\/O specs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Why choose a right-angle connector over a straight one?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Right-angle design saves space in tight helm areas, reduces cable strain, and prevents accidental pulls that could loosen connections.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable support bi-directional data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it handles both input (listener) and output (talker) for sharing GPS, speed, depth, and more between devices.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I configure NMEA 0183 on my Garmin device?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"From the home screen, go to Settings \u003e Communications \u003e NMEA 0183, select output sentences, and set baud rate to match your peripherals (usually 4800).\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this cable in saltwater environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it's built with corrosion-resistant materials to withstand marine conditions, but seal connections with dielectric grease for added durability.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What if my data isn't transferring after installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check baud rates, sentence selections, port wiring (TX to RX, etc.), and power cycle. Test with a loopback if needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable suitable for NMEA 2000 networks?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's NMEA 0183 specific but pairs well with gateways for hybrid setups, enabling legacy integration into modern N2K backbones.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat devices is the Garmin right-angle NMEA 0183 cable compatible with?\u003c\/h3\u003e\n      \u003cp\u003eIt works with most Garmin marine chartplotters, fishfinders, and MFDs featuring NMEA 0183 ports, including GPSMAP, echoMAP, and Striker series. Always verify your model's I\/O specs.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhy choose a right-angle connector over a straight one?\u003c\/h3\u003e\n      \u003cp\u003eRight-angle design saves space in tight helm areas, reduces cable strain, and prevents accidental pulls that could loosen connections.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes this cable support bi-directional data?\u003c\/h3\u003e\n      \u003cp\u003eYes, it handles both input (listener) and output (talker) for sharing GPS, speed, depth, and more between devices.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do I configure NMEA 0183 on my Garmin device?\u003c\/h3\u003e\n      \u003cp\u003eFrom the home screen, go to Settings \u0026gt; Communications \u0026gt; NMEA 0183, select output sentences, and set baud rate to match your peripherals (usually 4800).\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan I use this cable in saltwater environments?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—it's built with corrosion-resistant materials to withstand marine conditions, but seal connections with dielectric grease for added durability.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat if my data isn't transferring after installation?\u003c\/h3\u003e\n      \u003cp\u003eCheck baud rates, sentence selections, port wiring (TX to RX, etc.), and power cycle. Test with a loopback if needed.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs this cable suitable for NMEA 2000 networks?\u003c\/h3\u003e\n      \u003cp\u003eIt's NMEA 0183 specific but pairs well with gateways for hybrid setups, enabling legacy integration into modern N2K backbones.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\n\u003cstyle\u003e\n  .product-description { font-family: Arial, sans-serif; line-height: 1.6; color: #333; max-width: 800px; }\n  .faq-item { margin-bottom: 1.5em; padding: 1em; border-left: 4px solid #007cba; background: #f9f9f9; }\n  h2, h3 { color: #007cba; }\n  ul, ol { padding-left: 1.5em; }\n  li { margin-bottom: 0.5em; }\n\u003c\/style\u003eNMEA 0183 right angle cable \u003cbr\u003e\u003cbr\u003eThe NMEA 0183 right-angle cable warns that this product can expose you to chemicals known to cause cancer, birth defects, or other reproductive organ diseases in California.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31914\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11088-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078263\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071340125,"sku":"31914","price":38.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-0183-cable-1_65696b85-8c53-4674-8eba-889476a3c0a6.jpg?v=1673072697"},{"product_id":"43026-garmin-6-nmea-2000-cable-right","title":"Garmin 6' NMEA 2000 Cable - Right Angle","description":"NMEA 2000, Backbone\/Drop Right Angle\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnhance your marine electronics setup with a reliable backbone extension designed for tight spaces and seamless connectivity. This 6-foot NMEA 2000 cable features a right-angle plug that simplifies installations on crowded consoles, keeping wires organized and out of the way while ensuring robust data sharing across your boat's network.\u003c\/p\u003e\n\n  \u003ch2\u003eStreamline Your Boat's Network Backbone\u003c\/h2\u003e\n  \u003cp\u003eIn the world of marine navigation, a solid NMEA 2000 backbone is the highway for information between your chartplotter, sensors, transducers, and other devices. This cable extends that backbone effortlessly, supporting high-speed data transfer for real-time updates on depth, speed, wind, and GPS position. Whether you're upgrading an existing system or building from scratch, it integrates smoothly to minimize clutter and maximize performance during long days on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eThe Advantage of a Right-Angle Design\u003c\/h2\u003e\n  \u003cp\u003eStandard straight cables can create awkward bends and unnecessary strain in compact helm stations. The right-angle connector hugs surfaces flush, reducing wear from vibration and movement. This thoughtful engineering prevents signal loss and maintains peak reliability, even in rough seas. Boaters often praise how it frees up space for other gear, making your setup cleaner and more professional-looking.\u003c\/p\u003e\n\n  \u003ch2\u003eVersatile Compatibility for Garmin Systems\u003c\/h2\u003e\n  \u003cp\u003eBuilt to work hand-in-hand with popular Garmin marine displays like those in the GPSMAP 1000 series and ECHOMAP Plus lines, this cable ensures plug-and-play simplicity. It supports drop connections for adding peripherals without interrupting the main backbone, ideal for expanding radar, autopilot, or engine data feeds. Its black sheath blends discreetly with most boat aesthetics while offering water-resistant protection against splashes and salt exposure.\u003c\/p\u003e\n\n  \u003ch2\u003eSimple Installation Tips for Optimal Results\u003c\/h2\u003e\n  \u003cp\u003eGetting this cable up and running takes minutes:\n    \u003c\/p\u003e\n\u003col\u003e\n      \u003cli\u003ePower down your NMEA 2000 network.\u003c\/li\u003e\n      \u003cli\u003eDisconnect the existing backbone terminator or cable end.\u003c\/li\u003e\n      \u003cli\u003ePlug the right-angle end into your Garmin display or T-connector, routing neatly along bulkheads.\u003c\/li\u003e\n      \u003cli\u003eSecure with zip ties or cable clips to avoid chafing.\u003c\/li\u003e\n      \u003cli\u003eReconnect power and test device communication.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    Pro tip: Use a backbone extender if you need more than 6 feet, but keep total backbone length under 100 meters for best signal integrity.\n\n  \u003ch2\u003eBuilt Tough for Marine Demands\u003c\/h2\u003e\n  \u003cp\u003eGarmin's focus on durability shines through with tinned copper conductors that resist corrosion and flexible insulation that withstands extreme temperatures from -40°F to 185°F. Paired with a limited one-year warranty, it gives peace of mind for avid anglers, cruisers, and commercial operators alike. Regular inspections for frays ensure years of trouble-free service.\u003c\/p\u003e\n\n  \u003ch2\u003eElevate Your On-Water Experience\u003c\/h2\u003e\n  \u003cp\u003eImagine crisp sonar images, accurate heading data, and autopilot adjustments flowing without hiccups— all thanks to a well-extended NMEA 2000 network. This cable isn't just a connector; it's an investment in safer, smarter boating. Anglers get precise fishfinding, sailors monitor wind shifts instantly, and powerboaters track performance metrics effortlessly.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat does this cable connect in an NMEA 2000 system?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt extends the NMEA 2000 backbone, linking Garmin chartplotters, multifunction displays, and sensors for shared data like GPS, depth, and engine info.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhy choose a right-angle NMEA 2000 cable over a straight one?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe right-angle plug saves space, reduces cable strain in tight helm areas, and prevents kinks that could degrade connections over time.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the cable?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt measures 6 feet (1.82 meters), perfect for short extensions without exceeding network length limits.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs it compatible with my Garmin GPSMAP or ECHOMAP?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it pairs seamlessly with models like GPSMAP 1020\/1022 series and ECHOMAP Plus 72cv\/72sv, plus other NMEA 2000-certified Garmin marine devices.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this for drop cables too?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily a backbone extender, but it works in drop configurations via T-connectors for adding instruments without backbone disruption.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I maintain the cable for longevity?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRinse with fresh water after saltwater exposure, check for damage seasonally, and avoid sharp bends or direct sunlight when stored.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemprop=\"mainEntity\" itemscope itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the warranty coverage?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt comes with a limited one-year warranty against manufacturing defects, underscoring Garmin's commitment to quality marine gear.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101108900 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eNMEA 2000 Network Cable\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e6 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101108900 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtend Your NMEA 2000 Backbone With Our Backbone And Drop Cable\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With GPSMAP (R) 1020, 1020xs, 1022, 1022xsv And ECHOMAP ™ Plus 72cv, 72sv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eFeatures Right Angle Plug\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101108900 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eNMEA 2000 right angle cable \u003cbr\u003e\u003cbr\u003e\"GarminA 2 meter length of NMEA 2000 drop cable with a right-angle female connector at one end to plug into the back of a display. The other end has a male connector to plug into a T on the backbone.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-31915\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11089-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078270\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536071569501,"sku":"31915","price":29.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-6-nmea-2000-1.jpg?v=1673072701"},{"product_id":"55953-garmin-gps-19x-hvs-nmea-0183","title":"Garmin GPS 19x HVS NMEA 0183","description":"GPS19x HVS\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"key-features\"\u003e\n    \u003ch2\u003eUnlock Superior Navigation Precision on the Water\u003c\/h2\u003e\n    \u003cp\u003eEquip your vessel with the Garmin GPS 19x HVS NMEA 0183 receiver, a powerhouse designed for marine enthusiasts who demand unwavering accuracy in even the toughest conditions. This compact yet robust antenna delivers position, velocity, and time data at blistering 10 Hz update rates—ten times faster than standard units—ensuring your chartplotter or multifunction display (MFD) renders smooth, real-time tracking whether you're cruising at high speeds or maneuvering slowly through tight harbors.\u003c\/p\u003e\n    \u003cp\u003eWhat sets it apart? Its 32-channel architecture locks onto a broad array of satellites from GPS, GLONASS, Galileo, and QZSS networks. This multi-constellation support means fewer dropouts and pinpoint fixes, even under partial sky views like dense foliage or urban waterways. WAAS enhancement narrows your location down to within 3 meters, transforming guesswork into confidence-boosting navigation.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"performance-advantages\"\u003e\n    \u003ch2\u003eExperience Smoother Tracking and Heading at Any Speed\u003c\/h2\u003e\n    \u003cp\u003eTraditional GPS units often falter at low speeds, causing erratic jumps in position and course data below 1 mph—frustrating when anchoring or approaching waypoints. The GPS 19x HVS eliminates this jitter, providing a rock-steady heading that mirrors your boat's true orientation. Coming out of sharp turns? No more lag or skipping; it maintains fluid positioning through arcs, giving you the edge in precision docking or competitive racing.\u003c\/p\u003e\n    \u003cp\u003eAt higher velocities, the rapid 10 Hz refreshes paint your trail on the screen without blurring or gaps, ideal for offshore passages where every knot counts. Mariners report it revolutionizes autopilot performance, holding courses tighter and responding quicker to wind shifts or currents.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-flexibility\"\u003e\n    \u003ch2\u003eSeamless Integration for Any Boat Setup\u003c\/h2\u003e\n    \u003cp\u003eRugged IPX7 waterproofing laughs off saltwater spray, rain, and submersion, while flexible mounting options adapt to your deck design. Pole-mount for elevated views, flush-mount for sleek profiles, or tuck it under fiberglass hulls for a hidden install that preserves aesthetics and aerodynamics.\u003c\/p\u003e\n    \u003cp\u003eCustomization shines with selectable update rates (1 Hz, 5 Hz, or full 10 Hz), tailoring output to match your system's needs via the included select cable. The NMEA 0183 protocol ensures plug-and-play compatibility with Garmin's marine ecosystem, including instrument displays and autopilots from the 4000 through 7000 series and beyond. Power\/data cable simplifies wiring, minimizing clutter in tight console spaces.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePole mount:\u003c\/strong\u003e Optimal for open cockpits with clear sky access.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eSurface mount:\u003c\/strong\u003e Perfect for flat deck areas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUnder-deck mount:\u003c\/strong\u003e Discreet below fiberglass for radar-free zones.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-benefits\"\u003e\n    \u003ch2\u003eWhy Boaters Choose the GPS 19x HVS for Everyday Adventures\u003c\/h2\u003e\n    \u003cp\u003eWhether chasing trophy fish in coastal inlets, plotting multi-day cruises across open bays, or teaching new crew members to navigate safely, this receiver steps up. Its high-sensitivity tech punches through obstructions better than legacy antennas, while the enhanced heading data feeds accurate autopilot corrections—saving fuel and reducing skipper fatigue on long hauls.\u003c\/p\u003e\n    \u003cp\u003eFishermen love how it stabilizes marks over structure, preventing drift errors during drifts. Sailors appreciate the true wind-relative headings for tactical tacking. And for commercial ops, the reliability cuts downtime, keeping schedules on track.\u003c\/p\u003e\n    \u003cblockquote\u003e\"Switched to the 19x HVS and my plotter finally tracks like it's glued to the water—night and day difference in tight marinas.\"\u003c\/blockquote\u003e\n    \u003cp\u003e—Seasoned charter captain\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eKeep It Performing Like New\u003c\/h2\u003e\n    \u003cp\u003eA quick rinse with fresh water after salty outings prevents corrosion. Inspect cable connections seasonally for wear, and ensure firmware stays current for emerging satellite support. Avoid obstructing the hemispheric view with metal gear nearby to maximize satellite locks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003cdiv id=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the Garmin GPS 19x HVS superior for low-speed boating?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It delivers 10 Hz updates for ultra-smooth position and heading data, eliminating jitter and skipping common in slower GPS units below 1 mph—crucial for precise waypoint approaches and docking.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which satellite systems does the GPS 19x HVS support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This 32-channel receiver tracks GPS, GLONASS, Galileo, and QZSS for robust coverage and accurate fixes in challenging environments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How accurate is the position data from this receiver?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"WAAS-capable performance provides locations within 3 meters (9.84 feet), with enhanced stability at all speeds.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What mounting options are available for the GPS 19x HVS?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Includes pole, surface, and under-deck mounts, plus IPX7 waterproofing for versatile, durable installation on any vessel.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the GPS 19x HVS compatible with older Garmin chartplotters?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it integrates seamlessly via NMEA 0183 with Garmin marine displays and autopilots from the 4000, 5000, 6000, and 7000 series.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I adjust the update rate on this GPS antenna?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—configure for 1 Hz, 5 Hz, or 10 Hz using the included update rate select cable to match your setup.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's included in the package?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"GPS 19x HVS unit, pole mount, surface mount, under-deck mount, power\/data cable, update rate select cable, and documentation.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003c!-- FAQs rendered as accordion or list for UX, but schema handles SEO --\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat makes the Garmin GPS 19x HVS superior for low-speed boating?\u003c\/summary\u003e\n        \u003cp\u003eIt delivers 10 Hz updates for ultra-smooth position and heading data, eliminating jitter and skipping common in slower GPS units below 1 mph—crucial for precise waypoint approaches and docking.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhich satellite systems does the GPS 19x HVS support?\u003c\/summary\u003e\n        \u003cp\u003eThis 32-channel receiver tracks GPS, GLONASS, Galileo, and QZSS for robust coverage and accurate fixes in challenging environments.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow accurate is the position data from this receiver?\u003c\/summary\u003e\n        \u003cp\u003eWAAS-capable performance provides locations within 3 meters (9.84 feet), with enhanced stability at all speeds.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat mounting options are available for the GPS 19x HVS?\u003c\/summary\u003e\n        \u003cp\u003eIncludes pole, surface, and under-deck mounts, plus IPX7 waterproofing for versatile, durable installation on any vessel.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs the GPS 19x HVS compatible with older Garmin chartplotters?\u003c\/summary\u003e\n        \u003cp\u003eYes, it integrates seamlessly via NMEA 0183 with Garmin marine displays and autopilots from the 4000, 5000, 6000, and 7000 series.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I adjust the update rate on this GPS antenna?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—configure for 1 Hz, 5 Hz, or 10 Hz using the included update rate select cable to match your setup.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat's included in the package?\u003c\/summary\u003e\n        \u003cp\u003eGPS 19x HVS unit, pole mount, surface mount, under-deck mount, power\/data cable, update rate select cable, and documentation.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cb\u003eGPS 19x HVS\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe highly accurate GPS 19x HVS position receiver\/antenna provides up to 10 Hz update rates for position, velocity and time data. It offers high-sensitivity reception and enhanced position acquisition to the Garmin family of marine instruments, autopilots and multifunction displays.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDelivers Precise Location Data\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis 32-channel receiver is capable of tracking multiple global navigation satellite systems, including GPS, GLONASS, Galileo\u003csup\u003e1\u003c\/sup\u003eand QZSS\u003csup\u003e1\u003c\/sup\u003e. Since more satellites are visible, it can provide more accurate fixes in challenging conditions. With its enhanced position, heading and speed accuracy delivered up to 10 times more often than other receivers\/antennas, it provides smoother drawing of your position on the chartplotter\/MFD at higher speeds.\u003cbr\u003e\u003cbr\u003eWAAS-capable, it can determine your precise location to within 3 m (9.84 ft).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eObservable Advantages\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCompared to units with slower update rates, the GPS 19x offers dramatic improvement when used at low speeds. Position and course information from slower units can jitter and swing considerably at speeds below 1 mph. The GPS 19x provides a consistent and smooth heading which is especially important when trying to hit a specific waypoint or mark.\u003cbr\u003e\u003cbr\u003eThe GPS 19x also reflects the true boat heading smoothly and accurately. This is especially evident when coming out of turns. And, the GPS 19x eliminates position skipping that can occur at low speeds and when turning the boat in an arc. The GPS 19x maintains a smooth position throughout the turn\u003csup\u003e2\u003c\/sup\u003e.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt for Versatility\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePart of the Garmin marine instrument family, the GPS 19x HVS is built to withstand the elements. This waterproof (IPX7) sensor can be pole mounted or flush mounted. It also can be attached to the underside of many fiberglass decks for added ease of installation. In addition, it also can be configured to have 1 Hz or 5 Hz update rates to help support specific installation requirements.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003csup\u003e1\u003c\/sup\u003eSupported when available. A software update may be required.\u003cbr\u003e\u003cbr\u003e\u003csup\u003e2\u003c\/sup\u003eThe GPSMAP 6000 series, 7000 series and newer chartplotters have been optimized to fully use the 10 Hz information from the GPS 19x.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Devices:\u003c\/b\u003e\u003cbr\u003e4000,5000,6000,7000 series \u003cbr\u003e\u003cbr\u003eThe highly accurate GPS 19x HVS position receiver\/antenna provides an update rate of up to 10 Hz for position, speed and time data. It provides highly sensitive reception and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-44842\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-01010-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759982294\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536110399581,"sku":"CWR-44842","price":166.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gps-19x-hvs-1.jpg?v=1673073299"},{"product_id":"55954-garmin-gps-19x-nmea-2000","title":"Garmin GPS 19x NMEA 2000","description":"GPS19x NMEA 2000\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eUnlock Precision Navigation on the Water\u003c\/h2\u003e\n  \u003cp\u003eImagine gliding through choppy waters or navigating tight channels at dawn, where every meter counts. The Garmin GPS 19x NMEA 2000 steps in as your unwavering guide, delivering pinpoint accuracy with a blazing 10 Hz update rate for position, heading, and speed. This isn't just another antenna—it's engineered for marine environments, feeding rock-solid data to your chartplotters, multifunction displays (MFDs), and autopilots. Boaters from casual anglers to professional captains rely on its high-sensitivity reception to lock onto signals even under overcast skies or near urban interference.\u003c\/p\u003e\n  \n  \u003cp\u003eWhat sets it apart? A 32-channel powerhouse that juggles signals from GPS, GLONASS, Galileo, and QZSS simultaneously. More satellites mean fewer dropouts and tighter fixes, especially when you're weaving through no-wake zones or holding a course in fog. Pair it with WAAS for sub-3-meter precision, turning potential guesswork into confident maneuvers.\u003c\/p\u003e\n\n  \u003ch2\u003eSmooth Tracking for Real-World Boating\u003c\/h2\u003e\n  \u003cp\u003eAt highway speeds on the water, standard GPS units might lag, causing your plotter's cursor to stutter. Not here. The 10 Hz refresh paints your boat's path fluidly across the screen, ideal for high-speed pursuits or tournament fishing runs. But the magic shines at idle: below 1 mph, lesser receivers jitter like a shaky compass. The GPS 19x holds steady, serving up consistent headings to nail waypoints without the frustrating swing.\u003c\/p\u003e\n  \n  \u003cp\u003eExiting a sharp turn? It mirrors your vessel's true orientation without hesitation, banishing the \"position skipping\" that plagues slower setups. Sailors appreciate this during tacks, while powerboaters love the seamless handoff to autopilot—no erratic inputs disrupting your voyage.\u003c\/p\u003e\n\n  \u003ch2\u003eRugged Design Meets Flexible Installation\u003c\/h2\u003e\n  \u003cp\u003eCrafted for the harsh marine world, this IPX7-rated sensor shrugs off submersion and salt spray. Mount it on a pole for unobstructed sky views, flush on deck for a clean profile, or tuck it under fiberglass hulls to dodge damage from lines and gear. Its compact form integrates effortlessly into Garmin's ecosystem via NMEA 2000, sharing data across instruments without a tangle of wires.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip for installers: Position it high and forward, away from radar or engine heat, to maximize satellite visibility. Many users report quicker cold starts and fewer multipath errors this way, enhancing overall system reliability.\u003c\/p\u003e\n\n  \u003ch2\u003eWhat's Included for Hassle-Free Setup\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eGPS 19x NMEA 2000 receiver\/antenna\u003c\/li\u003e\n    \u003cli\u003ePole mount hardware\u003c\/li\u003e\n    \u003cli\u003eSurface mount kit\u003c\/li\u003e\n    \u003cli\u003eUnder-deck mounting option\u003c\/li\u003e\n    \u003cli\u003e6-meter NMEA 2000 backbone\/drop cable\u003c\/li\u003e\n    \u003cli\u003eNMEA 2000 T-connector\u003c\/li\u003e\n    \u003cli\u003eComprehensive documentation\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003cp\u003eEverything you need to get up and running, minimizing downtime on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration with Garmin Marine Gear\u003c\/h2\u003e\n  \u003cp\u003ePlays perfectly with Garmin's 4000, 5000, 6000, 7000, and 8000 series chartplotters and instruments. Newer models like the GPSMAP 6000\/7000+ fully leverage the 10 Hz data for buttery-smooth rendering and autopilot performance. Whether upgrading an older setup or building a networked helm, it elevates situational awareness across your entire system.\u003c\/p\u003e\n\n  \u003chr\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\" class=\"faq-section\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What update rate does the Garmin GPS 19x NMEA 2000 provide?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It delivers a 10 Hz update rate—10 times per second—for position, velocity, and time data, ensuring ultra-smooth tracking compared to standard 1 Hz units.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which satellite systems does the GPS 19x support?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This 32-channel receiver tracks GPS, GLONASS, Galileo, and QZSS, providing more satellites for superior accuracy in tough conditions.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the GPS 19x waterproof and durable for marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's IPX7 rated, capable of withstanding immersion in up to 1 meter of water for 30 minutes, and built to endure salt spray and harsh weather.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What mounting options are available for the GPS 19x?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Flexible choices include pole mounting, surface\/flush mounting, and under-deck installation on fiberglass hulls for versatile setups.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does the GPS 19x improve low-speed navigation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"At speeds under 1 mph, it eliminates jitter and position skipping, delivering steady headings crucial for precise waypoint approaches and tight maneuvers.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What accuracy can I expect with WAAS enabled?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"WAAS capability refines location to within 3 meters (9.84 feet), boosting reliability for anchoring, docking, and chartplotter overlays.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which Garmin devices is the GPS 19x compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for seamless NMEA 2000 integration with Garmin 4000, 5000, 6000, 7000, and 8000 series MFDs, instruments, and autopilots.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Why choose the GPS 19x over a standard marine GPS antenna?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The 10 Hz rate and multi-GNSS support offer dramatically smoother data at all speeds, reducing errors during turns and enhancing autopilot performance.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat update rate does the Garmin GPS 19x NMEA 2000 provide?\u003c\/h3\u003e\n      \u003cp\u003eIt delivers a 10 Hz update rate—10 times per second—for position, velocity, and time data, ensuring ultra-smooth tracking compared to standard 1 Hz units.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhich satellite systems does the GPS 19x support?\u003c\/h3\u003e\n      \u003cp\u003eThis 32-channel receiver tracks GPS, GLONASS, Galileo, and QZSS, providing more satellites for superior accuracy in tough conditions.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the GPS 19x waterproof and durable for marine use?\u003c\/h3\u003e\n      \u003cp\u003eYes, it's IPX7 rated, capable of withstanding immersion in up to 1 meter of water for 30 minutes, and built to endure salt spray and harsh weather.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat mounting options are available for the GPS 19x?\u003c\/h3\u003e\n      \u003cp\u003eFlexible choices include pole mounting, surface\/flush mounting, and under-deck installation on fiberglass hulls for versatile setups.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does the GPS 19x improve low-speed navigation?\u003c\/h3\u003e\n      \u003cp\u003eAt speeds under 1 mph, it eliminates jitter and position skipping, delivering steady headings crucial for precise waypoint approaches and tight maneuvers.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat accuracy can I expect with WAAS enabled?\u003c\/h3\u003e\n      \u003cp\u003eWAAS capability refines location to within 3 meters (9.84 feet), boosting reliability for anchoring, docking, and chartplotter overlays.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhich Garmin devices is the GPS 19x compatible with?\u003c\/h3\u003e\n      \u003cp\u003eIt's designed for seamless NMEA 2000 integration with Garmin 4000, 5000, 6000, 7000, and 8000 series MFDs, instruments, and autopilots.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhy choose the GPS 19x over a standard marine GPS antenna?\u003c\/h3\u003e\n      \u003cp\u003eThe 10 Hz rate and multi-GNSS support offer dramatically smoother data at all speeds, reducing errors during turns and enhancing autopilot performance.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\u003cb\u003eGPS 19x NMEA 2000\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe highly accurate GPS 19x NMEA 2000 position receiver\/antenna provides 10 Hz update rates for position, velocity and time data. It offers high-sensitivity reception and enhanced position acquisition to the Garmin family of marine multifunctional displays (MFD), instrument display and autopilots.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDelivers Reliable Location Data\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis 32-channel receiver is capable of tracking multiple global navigation satellite systems, including GPS, GLONASS, Galileo\u003csup\u003e1\u003c\/sup\u003e and QZSS\u003csup\u003e1\u003c\/sup\u003e. Since more satellites are visible, it can provide more accurate fixes in challenging conditions. With its enhanced position, heading and speed accuracy delivered 10 times more often than other receivers\/antennas, it provides smoother drawing of your position on the chartplotter\/MFD at higher speeds.\u003cbr\u003e\u003cbr\u003eWAAS-capable, it can determine your precise location to within 3 m (9.84 ft).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eObservable Advantages\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eCompared to units with slower update rates, the GPS 19x offers dramatic improvement when used at low speeds. Position and course information from slower units can jitter and swing considerably at speeds below 1 mph. The GPS 19x provides a consistent and smooth heading which is especially important when trying to hit a specific waypoint or mark.\u003cbr\u003e\u003cbr\u003eThe GPS 19x also reflects the true boat heading smoothly and accurately. This is especially evident when coming out of turns. And, the GPS 19x eliminates position skipping that can occur at low speeds and when turning the boat in an arc. The GPS 19x maintains a smooth position throughout the turn\u003csup\u003e2\u003c\/sup\u003e.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBuilt for Versatility\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003ePart of the Garmin marine instrument family, the GPS 19x NMEA 2000 is built to withstand the elements. This waterproof (IPX7) sensor can be pole mounted or flush mounted. It also can be attached to the underside of many fiberglass decks for added ease of installation.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003csup\u003e1\u003c\/sup\u003eSupported when available. A software update may be required.\u003cbr\u003e\u003cbr\u003e\u003csup\u003e2\u003c\/sup\u003eThe GPSMAP 6000 series, 7000 series and newer chartplotters have been optimized to fully use the 10 Hz information from the GPS 19x.\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompatible Units:\u003c\/b\u003e\u003cbr\u003e4000,5000,6000,7000,8000 series \u003cbr\u003e\u003cbr\u003eThe highly accurate GPS 19x NMEA 2000 position receiver\/antenna provides a 10 Hz update rate for position, speed and time data. It provides highly sensitive reception and...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-44843\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-01010-10\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759982300\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536110760029,"sku":"CWR-44843","price":203.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gps-19x-nmea-1.jpg?v=1673073305"},{"product_id":"43755-garmin-nmea-2000-power-cable","title":"Garmin NMEA 2000 Power Cable","description":"NMEA 2000, Power Cable\u003cbr\u003e\u003cbr\u003e\u003csection\u003e\n    \u003ch2\u003eWhy Your NMEA 2000 Network Needs Reliable Power\u003c\/h2\u003e\n    \u003cp\u003eOut on the water, every connection counts. Whether you're navigating choppy seas or plotting your next fishing spot, a stable power supply keeps your marine electronics humming without a hitch. This Garmin NMEA 2000 power cable steps in as the backbone for your network, delivering consistent voltage to devices like chartplotters and sensors. No more worrying about dropouts during critical moments—it's built tough for the marine environment, ensuring your Garmin EchoMap or GPSMAP series stays powered and responsive.\u003c\/p\u003e\n    \n    \u003ch2\u003eStandout Features That Marine Enthusiasts Rely On\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eGenerous 6-Foot Reach:\u003c\/strong\u003e At 2 meters long, it offers flexibility for clean routing in tight console spaces or across bulkheads.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eVibrant Yellow Sheathing:\u003c\/strong\u003e Easy to spot amid wiring clutter, reducing install time and helping with quick troubleshooting.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e T-connects seamlessly into the NMEA 2000 backbone—no splicing or special tools required.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eMarine-Tough Build:\u003c\/strong\u003e Resists corrosion, UV exposure, and vibration, holding up against saltwater splashes and rough rides.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch2\u003ePerfect Fit for Popular Garmin Systems\u003c\/h2\u003e\n    \u003cp\u003eDesigned specifically to energize Garmin's EchoMap CHIRP models like the 52cv, 52dv, 53cv, and 53dv, plus a wide range of GPSMAP series navigation units. It powers the entire NMEA 2000 network, letting transducers, autopilots, and multifunction displays share data effortlessly. Boaters upgrading their setups or replacing worn cables find it integrates flawlessly, maintaining peak performance across your Garmin ecosystem.\u003c\/p\u003e\n    \n    \u003ch2\u003eStep-by-Step Installation for Hassle-Free Setup\u003c\/h2\u003e\n    \u003cp\u003eGetting this cable online is straightforward, even for weekend warriors. Start by powering down your 12V DC system. Locate your NMEA 2000 backbone terminator, then snap one end of the cable into the drop cable port. Route the other end to a clean, fused 12V source—aim for at least 5 amps capacity. Secure with zip ties, avoiding sharp edges or heat sources. Test by firing up your chartplotter; green lights confirm success. Pro tip: Label terminations for future ease, and use dielectric grease on connectors to fend off moisture.\u003c\/p\u003e\n    \n    \u003ch2\u003eReal-World Benefits for Better Boating Adventures\u003c\/h2\u003e\n    \u003cp\u003eBeyond basic power delivery, this cable enhances reliability in demanding conditions. It minimizes voltage sag that plagues longer runs, keeping GPS signals sharp and sonar readings crystal clear. Anglers appreciate uninterrupted depth data during trolling, while cruisers enjoy stable engine monitoring feeds. Garmin's engineering shines through in its drop-resistant connectors and low-resistance conductors, outlasting generic alternatives in salt air. Pair it with backbone extenders for larger vessels, and you've got a network ready for expansion.\u003c\/p\u003e\n    \n    \u003ch2\u003eLongevity Tips to Maximize Performance\u003c\/h2\u003e\n    \u003cp\u003eKeep it performing like new with simple habits: Inspect connections seasonally for corrosion, especially after winter storage. Wipe down the yellow jacket with fresh water post-saltwater exposure. Avoid overloading the circuit—stick to Garmin's specs for network loads. If issues arise, like intermittent power, check fuses first; it's often the culprit over the cable itself. With proper care, it supports years of trouble-free operation on your boat.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat exactly does an NMEA 2000 power cable do?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eIt supplies dedicated 12V DC power to the entire NMEA 2000 network backbone, allowing multiple devices like chartplotters, sensors, and instruments to communicate and function without drawing from a single unit's supply.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this cable compatible with my EchoMap CHIRP 53cv?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eYes, it's fully compatible with EchoMap CHIRP models including the 52cv, 52dv, 53cv, and 53dv, as well as various GPSMAP series for powering the NMEA 2000 setup.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow long is the Garmin NMEA 2000 power cable?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eMeasuring 6 feet (2 meters), it provides ample length for most console installations while keeping wiring tidy.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDo I need any special tools to install it?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eNo special tools—just plug it into the backbone and a 12V fused source. Cable ties and a multimeter for testing are handy but optional.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhy choose yellow for the cable color?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eThe bright yellow makes it highly visible against dark wiring harnesses, speeding up identification during installs or maintenance.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle saltwater exposure?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eAbsolutely—it's engineered with marine-grade materials to resist corrosion, UV rays, and moisture common in boating environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat if my network already has power—do I still need this?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n            \u003cp itemprop=\"text\"\u003eFor optimal stability, especially with multiple devices, a dedicated power insertion point like this cable prevents voltage drops and network glitches.\u003c\/p\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n\u003c\/section\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101107900 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003ePower Garmin EchoMaps And GPSMAP Series Navigation Systems\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e6 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eYellow\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101107900 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eSupply Power To Your NMEA 2000 Network With Our 2 Meter Power Cable\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ™ CHIRP 52cv, 52dv, 53cv, 53dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101107900 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eNMEA 2000 power cable \u003cbr\u003e\u003cbr\u003eWe love outdoor sports and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32644\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11079-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759078157\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536112857181,"sku":"32644","price":25.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-power-1.jpg?v=1673073340"},{"product_id":"43883-garmin-airmar-smart-sensor-depth-temperature","title":"Garmin Airmar Smart Sensor Depth \u0026 temperature 20 Degree Tilted NMEA 2000 DT800","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your boating experience with precise underwater insights that keep you safe and informed on every voyage. This thru-hull transducer stands out by seamlessly delivering real-time depth and water temperature readings straight to your NMEA 2000 network, eliminating the clutter of extra wiring or displays. Designed for hulls with a 16 to 24-degree deadrise, its 20-degree tilt ensures optimal beam angle without compromising performance, making it a go-to choice for serious anglers, cruisers, and navigators who demand reliability in choppy waters or calm bays alike.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Boaters Rely on This Smart Transducer\u003c\/h2\u003e\n  \u003cp\u003eImagine gliding through shallow drafts or tracking fish in deeper waters with confidence. At the heart of this sensor is a powerful 100-watt element operating at 235 kHz, capable of penetrating up to 600 feet. The narrow 12-degree beamwidth sharpens focus on the bottom structure, helping you spot drop-offs, wrecks, or schools of fish with exceptional clarity. Paired with temperature sensing, it gives you the full picture—vital data for adjusting trolling speeds, selecting lures, or simply avoiding hazards during low-visibility conditions.\u003c\/p\u003e\n  \n  \u003cp\u003eWhat sets it apart? It's \"smart\" connectivity means plug-and-play integration with compatible chartplotters and multifunction displays. No more guesswork; your network receives calibrated data automatically, ready for overlays on your screens. With a sturdy 20-foot cable, installation reaches stern-mounted networks effortlessly, and the durable plastic housing withstands constant submersion without corrosion.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Installation for Lasting Performance\u003c\/h2\u003e\n  \u003cp\u003eGetting this transducer up and running doesn't require a marine yard overhaul. Select a spot forward of the propeller and away from strakes for the cleanest readings—typically 1\/3 of the hull length from the bow. Drill precisely, bed it in sealant, and secure with the included hardware. Pro tip: In colder climates, warm the hull surface first to prevent cracking, and always fair the mount to match your deadrise angle perfectly. Once connected to your NMEA 2000 backbone, it auto-configures, often within seconds. Follow best practices like routing cables away from engines to dodge interference, and you'll enjoy years of trouble-free operation.\u003c\/p\u003e\n  \n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePrep Step:\u003c\/strong\u003e Clean and sand the hull interior for a watertight seal.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAngle Check:\u003c\/strong\u003e Verify 20-degree tilt aligns with your hull's contour.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork Tie-In:\u003c\/strong\u003e Use T-connectors for easy drop-in to existing backbones.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTest Run:\u003c\/strong\u003e Calibrate in known depths post-install to fine-tune accuracy.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Performance Across Conditions\u003c\/h2\u003e\n  \u003cp\u003eBoat owners rave about its consistency—from coastal inlets where sudden shoals lurk, to offshore runs needing temp breaks for baitfish. The high-frequency design excels in shallower zones under 200 feet, minimizing clutter from suspended particles or thermoclines. In saltwater environments, its rugged build shrugs off barnacle buildup, while freshwater users appreciate the sensitivity for structure scanning. Whether you're chasing stripers in estuaries or cruising lakes, this sensor adapts, providing data that informs every decision on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eMaintenance That Keeps It Running Strong\u003c\/h2\u003e\n  \u003cp\u003eLongevity starts with simple habits. After each trip, inspect the face for marine growth— a soft brush and eco-friendly cleaner restore it quickly. Annually, haul out and check the O-ring seal; replace if worn. Avoid high-pressure washes that could damage the ceramic element. Storing your vessel on blocks? Protect the thru-hull with a winter plug to prevent freezing. These steps ensure pinpoint accuracy season after season, maximizing your investment in marine electronics.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \n  \u003cscript type=\"application\/ld+json\"\u003e\n  {\n    \"@context\": \"https:\/\/schema.org\",\n    \"@type\": \"FAQPage\",\n    \"mainEntity\": [\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What hull types is this 20-degree tilted transducer best suited for?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It's optimized for boats with 16 to 24-degree deadrise angles, ensuring the beam points straight down for accurate depth and temperature readings without distortion.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How deep can this sensor reliably measure?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It performs up to 600 feet, ideal for both inshore and moderate offshore use, with a focused beam that cuts through water column noise.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Does it require a separate display for data readout?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"No, it sends data directly to your NMEA 2000 network, viewable on any compatible chartplotter or MFD without additional hardware.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What's the cable length, and can it be extended?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It comes with a 20-foot cable, sufficient for most installations. Extensions are possible via NMEA 2000 drop cables, but keep total backbone length under spec limits.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"How does the temperature sensor perform in varying water conditions?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"It delivers fast, accurate readings across a wide range, helping detect thermal edges for fishing or navigation in stratified waters.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"Is professional installation recommended?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"DIY is feasible with basic tools and instructions, but pros ensure perfect alignment and sealing, especially on fiberglass hulls.\"\n        }\n      },\n      {\n        \"@type\": \"Question\",\n        \"name\": \"What frequency does it use, and why does it matter?\",\n        \"acceptedAnswer\": {\n          \"@type\": \"Answer\",\n          \"text\": \"235 kHz provides high-resolution imaging in shallower depths, balancing power and detail for bottom contouring and fish arches.\"\n        }\n      }\n    ]\n  }\n  \u003c\/script\u003e\n  \n  \u003cdiv class=\"faq-section\"\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat hull types is this 20-degree tilted transducer best suited for?\u003c\/summary\u003e\n      \u003cp\u003eIt's optimized for boats with 16 to 24-degree deadrise angles, ensuring the beam points straight down for accurate depth and temperature readings without distortion.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eHow deep can this sensor reliably measure?\u003c\/summary\u003e\n      \u003cp\u003eIt performs up to 600 feet, ideal for both inshore and moderate offshore use, with a focused beam that cuts through water column noise.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eDoes it require a separate display for data readout?\u003c\/summary\u003e\n      \u003cp\u003eNo, it sends data directly to your NMEA 2000 network, viewable on any compatible chartplotter or MFD without additional hardware.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat's the cable length, and can it be extended?\u003c\/summary\u003e\n      \u003cp\u003eIt comes with a 20-foot cable, sufficient for most installations. Extensions are possible via NMEA 2000 drop cables, but keep total backbone length under spec limits.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eHow does the temperature sensor perform in varying water conditions?\u003c\/summary\u003e\n      \u003cp\u003eIt delivers fast, accurate readings across a wide range, helping detect thermal edges for fishing or navigation in stratified waters.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eIs professional installation recommended?\u003c\/summary\u003e\n      \u003cp\u003eDIY is feasible with basic tools and instructions, but pros ensure perfect alignment and sealing, especially on fiberglass hulls.\u003c\/p\u003e\n    \u003c\/details\u003e\n    \u003cdetails\u003e\n      \u003csummary\u003eWhat frequency does it use, and why does it matter?\u003c\/summary\u003e\n      \u003cp\u003e235 kHz provides high-resolution imaging in shallower depths, balancing power and detail for bottom contouring and fish arches.\u003c\/p\u003e\n    \u003c\/details\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eEquip your vessel with technology that anticipates your needs, turning every outing into a smoother, safer adventure. Dive deeper into the water's secrets and navigate with unmatched precision.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 0101110500 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eThru-Hull Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDepth: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e600 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e100 Watt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFrequency Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e235 kHz\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eSupported Angle: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 To 24 Degree Deadrise\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e20 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 0101110500 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003ePlastic Smart Thru-Hull Mount Transducer Provides Depth And Temperature Data To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003e100 Watt Transducer Has A Depth Of 600 Feet\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransducer Kit Comes With Installation Instructions\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTransducer Supports A 16 To 24 Degree Deadrise\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 0101110500 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eSmart Thru-Hull Mount Transducer with Depth \u0026amp; Temperature (20°, NMEA 2000®) - Airmar DT800\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eOur plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network.\u003cbr\u003e\u003cbr\u003eThis 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz; a beamwidth of 12 degrees; and a 16 to 24 degree deadrise.\u003cbr\u003e\u003cbr\u003eTransducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. \u003cbr\u003e\u003cbr\u003eIt has a low, retractable through-hull sensor that allows us to accurately calculate and calculate depth and temperature. Its hull performance is not affected by low...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-32772\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11105-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759079239\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536114823261,"sku":"CWR-32772","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-airmar-smart-sensor-1.jpg?v=1673073377"},{"product_id":"56211-furuno-pg700-heading-sensor-nmea-2000","title":"Furuno PG700 Heading Sensor NMEA 2000","description":"\u003cmain itemscope itemtype=\"https:\/\/schema.org\/Product\"\u003e\n    \u003carticle\u003e\n        \u003cheader\u003e\n            \u003ch1 itemprop=\"name\"\u003eFuruno PG700 Heading Sensor - Professional NMEA 2000 Magnetic Compass for Marine Navigation\u003c\/h1\u003e\n            \u003cp class=\"product-tagline\"\u003eExperience unparalleled heading accuracy with Furuno's advanced rate-compensated magnetic sensor technology\u003c\/p\u003e\n        \u003c\/header\u003e\n\n        \u003csection class=\"product-overview\"\u003e\n            \u003cp itemprop=\"description\"\u003eThe \u003cstrong\u003eFuruno PG700 Heading Sensor\u003c\/strong\u003e revolutionizes marine navigation with its innovative combination of fluxgate magnetic sensing and solid-state rate gyroscope technology. Engineered for professional mariners and serious recreational boaters, this NMEA 2000-compatible heading sensor delivers exceptional ±1.0° accuracy and 0.1° resolution, making it essential equipment for radar systems, autopilots, and advanced navigation networks.\u003c\/p\u003e\n            \n            \u003cp\u003eThis rate-compensated heading sensor automatically corrects for magnetic field distortions while providing stable, reliable compass data to all connected NMEA 2000 devices. Whether you're running true radar echo trails, operating sophisticated autopilot systems, or integrating with video plotters and scanning sonars, the PG700 ensures your navigation system performs with professional-grade precision.\u003c\/p\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"key-features\"\u003e\n            \u003ch2\u003eAdvanced Navigation Technology Features\u003c\/h2\u003e\n            \u003cul class=\"features-list\" itemprop=\"additionalProperty\" itemscope itemtype=\"https:\/\/schema.org\/PropertyValue\"\u003e\n                \u003cli\u003e\n\u003cstrong\u003eDual-Sensor Technology:\u003c\/strong\u003e Combines fluxgate magnetic sensor with solid-state rate gyroscope for superior heading stability and accuracy\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eAutomatic Distortion Correction:\u003c\/strong\u003e Intelligent magnetic field distortion compensation eliminates manual calibration requirements\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eInstallation Site Diagnostics:\u003c\/strong\u003e Automatically determines installation location suitability for optimal performance\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eHigh-Precision Output:\u003c\/strong\u003e Delivers ±1.0° heading accuracy with 0.1° resolution and 45°\/second rate-of-turn capability\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eUniversal NMEA 2000 Compatibility:\u003c\/strong\u003e Seamlessly integrates with all NMEA 2000 marine electronics systems\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eMaintenance-Free Operation:\u003c\/strong\u003e Advanced design eliminates routine maintenance requirements\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eProfessional Installation System:\u003c\/strong\u003e Includes versatile L-bracket for flexible bulkhead or deck mounting\u003c\/li\u003e\n            \u003c\/ul\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"technical-specifications\"\u003e\n            \u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n            \u003cdiv class=\"specs-grid\"\u003e\n                \u003cdiv class=\"spec-category\"\u003e\n                    \u003ch3\u003ePerformance Specifications\u003c\/h3\u003e\n                    \u003cul itemprop=\"additionalProperty\" itemscope itemtype=\"https:\/\/schema.org\/PropertyValue\"\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eHeading Accuracy:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e±1.0° (horizontal)\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eHeading Resolution:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e0.1°\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eRate of Turn:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e45°\/second maximum\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eSensor Type:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003eFluxgate magnetic with rate gyroscope\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eData Output:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003eNMEA 2000 (CAN Bus)\u003c\/span\u003e\n\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv class=\"spec-category\"\u003e\n                    \u003ch3\u003ePower \u0026amp; Environmental\u003c\/h3\u003e\n                    \u003cul\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eOperating Voltage:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e12V DC\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eOperating Temperature:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e-15°C to +55°C (5°F to 131°F)\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eProtection Rating:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003eIP55 waterproof construction\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eMounting Options:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003eDeck or bulkhead with L-bracket\u003c\/span\u003e\n\u003c\/li\u003e\n                        \u003cli\u003e\n\u003cspan class=\"spec-label\"\u003eCable Length:\u003c\/span\u003e \u003cspan class=\"spec-value\"\u003e6 meters included\u003c\/span\u003e\n\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"marine-applications\"\u003e\n            \u003ch2\u003eProfessional Marine Navigation Applications\u003c\/h2\u003e\n            \u003cdiv class=\"applications-grid\"\u003e\n                \u003cdiv class=\"app-category\"\u003e\n                    \u003ch3\u003eRadar Integration\u003c\/h3\u003e\n                    \u003cul\u003e\n                        \u003cli\u003eTrue radar echo trail display\u003c\/li\u003e\n                        \u003cli\u003eTrue motion radar operation\u003c\/li\u003e\n                        \u003cli\u003eARPA target tracking enhancement\u003c\/li\u003e\n                        \u003cli\u003eCourse stabilized radar modes\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv class=\"app-category\"\u003e\n                    \u003ch3\u003eAutopilot Systems\u003c\/h3\u003e\n                    \u003cul\u003e\n                        \u003cli\u003eMagnetic compass steering\u003c\/li\u003e\n                        \u003cli\u003eCourse holding accuracy\u003c\/li\u003e\n                        \u003cli\u003eWind vane steering integration\u003c\/li\u003e\n                        \u003cli\u003eNavigation system waypoint following\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv class=\"app-category\"\u003e\n                    \u003ch3\u003eChart Plotter Integration\u003c\/h3\u003e\n                    \u003cul\u003e\n                        \u003cli\u003eAccurate vessel heading overlay\u003c\/li\u003e\n                        \u003cli\u003eCourse over ground calculations\u003c\/li\u003e\n                        \u003cli\u003eNavigation route planning\u003c\/li\u003e\n                        \u003cli\u003eMulti-function display integration\u003c\/li\u003e\n                    \u003c\/ul\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"installation-benefits\"\u003e\n            \u003ch2\u003eInstallation \u0026amp; Compliance Information\u003c\/h2\u003e\n            \u003cdiv class=\"install-info\"\u003e\n                \u003ch3\u003eProfessional Installation Features\u003c\/h3\u003e\n                \u003cul\u003e\n                    \u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e L-bracket system accommodates various installation configurations\u003c\/li\u003e\n                    \u003cli\u003e\n\u003cstrong\u003eSite Suitability Analysis:\u003c\/strong\u003e Built-in diagnostics verify optimal sensor placement\u003c\/li\u003e\n                    \u003cli\u003e\n\u003cstrong\u003eNMEA 2000 Integration:\u003c\/strong\u003e Simple plug-and-play connection to existing networks\u003c\/li\u003e\n                    \u003cli\u003e\n\u003cstrong\u003eMagnetic Interference Immunity:\u003c\/strong\u003e Advanced compensation algorithms minimize installation restrictions\u003c\/li\u003e\n                \u003c\/ul\u003e\n                \n                \u003ch3\u003eRegulatory Compliance\u003c\/h3\u003e\n                \u003cul\u003e\n                    \u003cli\u003eNMEA 2000 certified for universal compatibility\u003c\/li\u003e\n                    \u003cli\u003eMarine-grade IP55 waterproof construction\u003c\/li\u003e\n                    \u003cli\u003eProfessional marine electronics standards compliance\u003c\/li\u003e\n                    \u003cli\u003eFuruno quality assurance and 2-year limited warranty coverage\u003c\/li\u003e\n                \u003c\/ul\u003e\n            \u003c\/div\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"compatibility-systems\"\u003e\n            \u003ch2\u003eSystem Compatibility \u0026amp; Integration\u003c\/h2\u003e\n            \u003cp\u003eThe PG700 integrates seamlessly with comprehensive NMEA 2000 marine electronics networks, providing precision heading data to:\u003c\/p\u003e\n            \u003cul\u003e\n                \u003cli\u003e\n\u003cstrong\u003eFuruno Marine Electronics:\u003c\/strong\u003e Radar systems, chart plotters, fish finders, and multi-function displays\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eAutopilot Systems:\u003c\/strong\u003e All NMEA 2000-compatible steering and navigation control systems\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eNavigation Networks:\u003c\/strong\u003e GPS plotters, AIS systems, and integrated bridge systems\u003c\/li\u003e\n                \u003cli\u003e\n\u003cstrong\u003eSonar Equipment:\u003c\/strong\u003e Scanning sonars and advanced fish finder systems requiring heading data\u003c\/li\u003e\n            \u003c\/ul\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"faq-section\"\u003e\n            \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n            \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n                \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n                    \u003ch3 itemprop=\"name\"\u003eWhat is the accuracy of the Furuno PG700 heading sensor?\u003c\/h3\u003e\n                    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n                        \u003cp itemprop=\"text\"\u003eThe PG700 provides ±1.0° heading accuracy with 0.1° resolution, making it suitable for professional marine navigation applications including radar systems and autopilots.\u003c\/p\u003e\n                    \u003c\/div\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n                    \u003ch3 itemprop=\"name\"\u003eDoes the PG700 require regular calibration or maintenance?\u003c\/h3\u003e\n                    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n                        \u003cp itemprop=\"text\"\u003eNo, the PG700 features automatic magnetic field distortion correction and is designed to be virtually maintenance-free. The sensor automatically determines installation site suitability and compensates for magnetic interference.\u003c\/p\u003e\n                    \u003c\/div\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n                    \u003ch3 itemprop=\"name\"\u003eIs the PG700 compatible with non-Furuno NMEA 2000 equipment?\u003c\/h3\u003e\n                    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n                        \u003cp itemprop=\"text\"\u003eYes, the PG700 outputs standard NMEA 2000 data and is compatible with all NMEA 2000-certified marine electronics from any manufacturer, including autopilots, chart plotters, and radar systems.\u003c\/p\u003e\n                    \u003c\/div\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n                    \u003ch3 itemprop=\"name\"\u003eWhat installation considerations are important for optimal PG700 performance?\u003c\/h3\u003e\n                    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n                        \u003cp itemprop=\"text\"\u003eThe PG700 should be mounted away from magnetic interference sources using the included L-bracket. The sensor automatically analyzes installation site suitability and provides feedback for optimal placement.\u003c\/p\u003e\n                    \u003c\/div\u003e\n                \u003c\/div\u003e\n                \n                \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\"\u003e\n                    \u003ch3 itemprop=\"name\"\u003eWhat marine applications benefit most from the PG700 heading sensor?\u003c\/h3\u003e\n                    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\"\u003e\n                        \u003cp itemprop=\"text\"\u003eThe PG700 enhances radar echo trails, true motion displays, autopilot accuracy, chart plotter integration, and scanning sonar performance. Any NMEA 2000 system requiring precise heading data benefits from the PG700's accuracy.\u003c\/p\u003e\n                    \u003c\/div\u003e\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/section\u003e\n\n        \u003csection class=\"product-conclusion\"\u003e\n            \u003cp\u003eInvest in navigation precision with the Furuno PG700 Heading Sensor - the professional choice for accurate, reliable magnetic compass data in demanding marine environments. With automatic distortion correction, maintenance-free operation, and universal NMEA 2000 compatibility, the PG700 ensures your navigation systems perform with the precision that professional mariners demand.\u003c\/p\u003e\n        \u003c\/section\u003e\n    \u003c\/article\u003e\n\u003c\/main\u003e\n\u003cp\u003eFuruno is a fluxgate magnetic sensor with the enhanced stability of a solid-state rate gyroscope. Automatic magnetic field distortion correction provides highly accurate and stable readouts of your ship's heading. The sensor detects terrestrial magnetism and produces compass data to CAN bus devices. Typical applications include true radar echo trail and true motion, auto pilots, video plotters, scanning sonars and more. These sophisticated components are contained within a rugged, compact case. The supplied L-Bracket allows for flexible installation. Unique design elements make this virtually maintenance-free and easy to install.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno PG700 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFuruno CAN Bus Devices\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eType: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFluxgate Magnetic Sensor\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFloor\/ Bulkhead\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePrecision: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e+\/- 1 Degree Heading Accuracy\/ 0.1 Degree Heading Resolution\/ 45 Degree Per Second Rate-Of Turn\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eFunction: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eProvides Heading\/ Rate of Turn\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eOutput Format: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eNMEA 2000\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eOperating Voltage: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eOperating Temperature: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 To 131 Degree Fahrenheit\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eWaterproof Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eIP55 Rating Waterproof\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWith Heading Sensor\/ 6 Meter Cable\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFuruno PG700 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eAutomatic Magnetic Field Distortion Correction Provides Highly Accurate And Stable Readouts Of Your Ship's Heading\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSensor Detects Terrestrial Magnetism And Produces Compass Data To CAN Bus Devices\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eUnique Design Elements Make The Sensor Virtually Maintenance-Free\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eFuruno PG700 Technical Bulletins\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/FUR\/TechnicalBulletins\/pg700_brochure.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003epg700_brochure.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003ePG700 Integrated Heading Sensor, NMEA2000\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe PG-700 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAngular velocity sensor and magnetic bearing sensor incorporated\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic determination of installation site suitability\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eL-shaped mounting base for mounting on bulkhead\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput of magnetic bearing data to FURUNO CAN bus device\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003ePg700 integrated heading sensor, Nmea2000 Pg-700 is a rate-compensated heading sensor that uses innovative electromagnetic compass technology to achieve highly accurate heading.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-45100\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e PG700\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679329035\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536135041117,"sku":"CWR-45100","price":696.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-pg700-heading-sensor-1.jpg?v=1673073659"},{"product_id":"57630-furuno-nmea-0183-cable-10p-f-gp33","title":"Furuno NMEA 0183 Cable 10P f\/GP33","description":"NMEA 0183 GP33 Cable Assembly, 2m\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eEnsure seamless communication between your Furuno GP-33 GPS receiver and other marine electronics with this specialized NMEA 0183 cable. Designed specifically for the GP-33, this 10-pin cable assembly bridges the gap for reliable data sharing, whether you're integrating with chartplotters, radars, or autopilots. In the demanding marine environment, where every signal counts for safe navigation, this cable delivers consistent performance without the headaches of loose connections or signal dropouts.\u003c\/p\u003e\n  \n  \u003ch2\u003eWhy Choose This Cable for Your GP-33 Setup?\u003c\/h2\u003e\n  \u003cp\u003eMarine enthusiasts and professionals know that NMEA 0183 remains a cornerstone protocol for sharing GPS position, speed, depth, and heading data across devices. Unlike generic cables that might cause compatibility issues or intermittent failures, this Furuno-engineered 10P cable matches the GP-33's pinout precisely. It supports full-duplex communication, allowing bidirectional data flow for enhanced system integration. Built with rugged shielding and high-quality connectors, it withstands saltwater exposure, vibrations, and temperature swings common on board.\u003c\/p\u003e\n  \n  \u003cp\u003ePicture this: You're out on a long offshore passage, relying on your GP-33 for waypoint navigation. Without a dependable cable, overlaid data from your fishfinder or VHF could glitch, leading to confusion. This cable eliminates those risks, providing crystal-clear NMEA sentences like GGA, RMC, and VTG for pinpoint accuracy.\u003c\/p\u003e\n  \n  \u003ch2\u003eKey Benefits for Everyday Boaters and Pros\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e No soldering or adapters needed—direct fit for GP-33 rear panel.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRobust Construction:\u003c\/strong\u003e Tinned copper conductors resist corrosion, with strain relief to prevent wear from constant movement.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Connectivity:\u003c\/strong\u003e Links to a wide array of NMEA 0183-compliant gear, from older legacy systems to modern multifunction displays.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e Low capacitance ensures minimal data loss over distances up to the protocol's spec, keeping your nav data fresh.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSpace-Saving Design:\u003c\/strong\u003e Compact 10-pin layout optimizes your helm's wiring without bulky harnesses.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \n  \u003ch2\u003eInstallation Tips for Optimal Performance\u003c\/h2\u003e\n  \u003cp\u003eGetting this cable up and running is straightforward, but a few pro tips can make it foolproof. First, power down all devices before connecting to avoid shorts. Route the cable away from high-voltage lines and engines to dodge interference—use zip ties and conduit for clean, protected runs. On the GP-33, it slots into the dedicated NMEA port; match the keyed connector to prevent misalignment.\u003c\/p\u003e\n  \n  \u003cp\u003eOnce connected, verify output with a multimeter or NMEA test tool: check for 12V supply on pin 1 and ground on pin 5, then confirm TX\/RX lines are active. If integrating multiple devices, consider a dedicated NMEA multiplexer to handle listener overload, as the GP-33 outputs robust talker signals.\u003c\/p\u003e\n  \n  \u003ch2\u003eMaintenance and Troubleshooting Essentials\u003c\/h2\u003e\n  \u003cp\u003eLike any marine gear, periodic checks keep it reliable. Inspect connectors quarterly for oxidation—clean with electrical contact spray if needed. If data flow stutters, swap baud rates (typically 4800 bps for NMEA 0183) or test for pinched wires. Common fixes include reseating plugs or adding ferrite chokes for EMI suppression. With proper care, this cable outlasts seasonal use, saving you downtime and repair costs.\u003c\/p\u003e\n  \n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this NMEA 0183 cable compatible only with the Furuno GP-33?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, it's engineered specifically for the GP-33 GPS receiver's 10-pin port, ensuring a perfect match for Furuno's pin assignments. While NMEA 0183 is a standard protocol, the connector is model-specific.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat data does this cable transmit from the GP-33?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt carries essential NMEA 0183 sentences including GGA (position), GLL (lat\/long), RMC (recommended minimum), and more, enabling full GPS data sharing with compatible devices.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the cable, and can it be extended?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThe standard length suits most helm installations. For extensions, use shielded NMEA cable with proper terminators to maintain signal quality under 50 meters total run.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it support NMEA 0183HS (high-speed) mode?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, it's for standard NMEA 0183 at 4800 baud. The GP-33 doesn't output high-speed, so this matches perfectly without needing upgrades.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this cable for input to the GP-33 from other sensors?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily for output from GP-33, but bidirectional capable. Confirm your setup's wiring for RX\/TX to enable input like heading from a compass.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable waterproof or suitable for external mounting?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eConnectors are IPX-rated for splash resistance, but protect junctions with heat-shrink or enclosures for submersion or harsh exposure.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat if my device uses NMEA 2000—will this work?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo direct compatibility; NMEA 0183 to 2000 gateways are required for bridging these protocols in mixed networks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eUpgrade your GP-33's connectivity today and navigate with confidence. This cable isn't just a wire—it's the reliable link in your boating ecosystem.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this NMEA 0183 cable compatible only with the Furuno GP-33?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it's engineered specifically for the GP-33 GPS receiver's 10-pin port, ensuring a perfect match for Furuno's pin assignments. While NMEA 0183 is a standard protocol, the connector is model-specific.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What data does this cable transmit from the GP-33?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It carries essential NMEA 0183 sentences including GGA (position), GLL (lat\/long), RMC (recommended minimum), and more, enabling full GPS data sharing with compatible devices.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long is the cable, and can it be extended?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The standard length suits most helm installations. For extensions, use shielded NMEA cable with proper terminators to maintain signal quality under 50 meters total run.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it support NMEA 0183HS (high-speed) mode?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No, it's for standard NMEA 0183 at 4800 baud. The GP-33 doesn't output high-speed, so this matches perfectly without needing upgrades.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this cable for input to the GP-33 from other sensors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Primarily for output from GP-33, but bidirectional capable. Confirm your setup's wiring for RX\/TX to enable input like heading from a compass.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this cable waterproof or suitable for external mounting?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Connectors are IPX-rated for splash resistance, but protect junctions with heat-shrink or enclosures for submersion or harsh exposure.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What if my device uses NMEA 2000—will this work?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No direct compatibility; NMEA 0183 to 2000 gateways are required for bridging these protocols in mixed networks.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cb\u003eNMEA 0183 Cable 10P f\/GP33\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 0183\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCable 10P\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFor GP33\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe function of NMEA 0183 cable 10P f GP33 The use of NMEA 0183 cable 10P GP33 Warning This product can expose you to chemicals known to cause cancer in California,...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-46519\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 001-112-970\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679340078\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536243011677,"sku":"CWR-46519","price":120.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-nmea-0183-cable-1.jpg?v=1673076241"},{"product_id":"45562-furuno-gp330b-gps-waas-sensor-f-nmea2000","title":"Furuno GP330B GPS\/WAAS Sensor f\/NMEA2000","description":"GPS\/WAAS Sensor - NMEA 2000\/NMEA 0183\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eUpgrade your vessel's navigation with the Furuno GP330B, a compact powerhouse that delivers pinpoint accuracy even in demanding marine conditions. Mariners trust this GPS\/WAAS sensor for its reliability across fishing boats, yachts, and commercial crafts, ensuring you never lose your way when it matters most.\u003c\/p\u003e\n\n  \u003ch2\u003ePrecision Positioning for Confident Voyages\u003c\/h2\u003e\n  \u003cp\u003eAt the heart of the GP330B is its 14 parallel-channel receiver—12 dedicated GPS channels paired with 2 WAAS channels—delivering position accuracy down to 3 meters when WAAS is engaged. This isn't just about numbers; it's real-world performance that helps you anchor precisely in crowded bays or track schools of fish without drifting off course. Updates refresh every second, giving you smooth, responsive data feeds right to your chartplotter.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless NMEA2000 Integration\u003c\/h2\u003e\n  \u003cp\u003eDesigned as an NMEA2000-certified sensor, the GP330B plugs effortlessly into your network backbone or drop lines, thanks to its innovative \"pin-enabled\" termination resistor. No more fumbling with complex wiring—simply connect the included 6-meter cable and you're set. It's a perfect match for Furuno NavNet 3D systems or any NMEA2000-compatible setup, including direct links to Furuno DRS radar units. This plug-and-play simplicity saves hours during installation, letting you focus on the water ahead.\u003c\/p\u003e\n\n  \u003ch2\u003eRugged Build for Harsh Marine Environments\u003c\/h2\u003e\n  \u003cp\u003eBuilt tough with an IP56 waterproof rating, the GP330B shrugs off spray, rain, and rough seas. Its white deck-mount housing blends discreetly on most vessels, while included hardware supports flexible deck or mast installations. Low power draw— just 175mA at 12VDC (LEN=3)—means it won't strain your batteries during long outings. Proven in extreme conditions from coastal patrols to offshore adventures, this sensor stands up where others falter.\u003c\/p\u003e\n\n  \u003ch2\u003eQuick Startup and Everyday Reliability\u003c\/h2\u003e\n  \u003cp\u003eCold starts in under a minute get you fixing positions fast, ideal for those dawn launches or after storage. Space-saving design keeps your setup clutter-free, maximizing deck space for gear or crew. Whether you're navigating tight channels or plotting long-range routes, the GP330B provides the stable, high-speed data your systems crave.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Tips from Seasoned Mariners\u003c\/h2\u003e\n  \u003cp\u003eMount it high on the mast for unobstructed sky view, away from metal structures that could block signals. Secure the NMEA2000 cable along existing runs to avoid snags, and always test WAAS lock before heading out—stronger signals mean tighter accuracy. Pair it with a multifunction display for full NavNet synergy, turning raw GPS data into intuitive charts and overlays.\u003c\/p\u003e\n\n  \u003ch2\u003eVersatile for Every Vessel Type\u003c\/h2\u003e\n  \u003cp\u003eFrom compact center consoles chasing tuna to luxury cruisers crossing oceans, the GP330B adapts to your needs. Commercial operators appreciate its cost-effectiveness and warranty-backed durability, while recreational skippers love the hassle-free performance that enhances safety without complexity.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes the Furuno GP330B stand out for marine GPS needs?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIts 14-channel WAAS receiver delivers 3-meter accuracy with second-by-second updates, in a compact, NMEA2000-ready package built for tough seas.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the GP330B compatible with non-Furuno systems?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, as an NMEA2000-certified device, it works seamlessly with any compliant network, including chartplotters from various brands.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long does it take for the GP330B to get a first fix?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCold start time-to-first-fix is typically under 1 minute, with hot starts even faster for quick repositioning.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I mount the GP330B on a mast?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—hardware is included for both deck and mast mounting, ensuring optimal signal reception.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the power consumption of this GPS sensor?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt runs efficiently at 12VDC with 175mA draw, rated at LEN=3 for NMEA2000 networks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes WAAS improve accuracy on the GP330B?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, activating WAAS boosts precision to within 3 meters, crucial for precise navigation in busy waters.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes the Furuno GP330B stand out for marine GPS needs?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Its 14-channel WAAS receiver delivers 3-meter accuracy with second-by-second updates, in a compact, NMEA2000-ready package built for tough seas.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the GP330B compatible with non-Furuno systems?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, as an NMEA2000-certified device, it works seamlessly with any compliant network, including chartplotters from various brands.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long does it take for the GP330B to get a first fix?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Cold start time-to-first-fix is typically under 1 minute, with hot starts even faster for quick repositioning.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I mount the GP330B on a mast?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—hardware is included for both deck and mast mounting, ensuring optimal signal reception.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the power consumption of this GPS sensor?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It runs efficiently at 12VDC with 175mA draw, rated at LEN=3 for NMEA2000 networks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does WAAS improve accuracy on the GP330B?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, activating WAAS boosts precision to within 3 meters, crucial for precise navigation in busy waters.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eThis is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B is capable of data output in either NMEA2000 or NMEA0183 formats, making it an ideal GPS sensor for use with NavNet systems. The sensor comes with all of the hardware required for deck- or mast-mounting solutions. A 6 Meter cable with NMEA2000 connector is supplied as standard.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno GP330B Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMounting Location: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eDeck Mount\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWhite\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eWaterproof Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eIP56 Rating Waterproof\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eWith 6 Meter Cable\/ Hardware\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFuruno GP330B Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eHigh Performance GPS Receiver Designed For Any Type Of Vessel\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eOffers Extremely Accurate Position Fixes, Within 3 Meters With The WAAS Mode Activated\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eGP330B\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe GP-330B is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. \u003cbr\u003e\u003cbr\u003eThe GP330B is capable of data output in NMEA2000 format, making it an ideal GPS sensor for use with NavNet 3D systems. The sensor comes with all of the hardware required for deck- or mast-mounting solutions. A 6-meter cable with NMEA2000 connector is supplied as standard. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Features: \u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eHigh Accuracy, 14 Parallel Channel Receiver with Twelve Dedicated GPS Channels and Two Dedicated WAAS Channels \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNMEA2000 Certified GPS Antenna Sensor \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFast Start Up (1 minute Cold Start Time-to-First-Fix) \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePosition updated every second \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUnique \"Pin-Enabled\" Termination Resistor allows simple NMEA2000 Backbone or Drop Wiring configurations \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpace-saving installation \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIdeal position-fixing sensor for NavNet?3D series \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDirect connection to any Furuno DRS \u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Requirements: \u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003eLow Power Consumption - 12VDC, 175mA (NMEA2000 LEN=3) \u003c\/li\u003e\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\"The GP-330B is a high performance GPS receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B is capable of data output in either NMEA0183 or NMEA2000 formats, making it an ideal GPS sensor for use with NavNet 3D systems. The sensor comes with all of the hardware required for deck or mast-mounting solutions.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34451\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e GP330B\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679317070\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536246222941,"sku":"CWR-34451","price":360.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-gp330b-gps-waas-1.jpg?v=1673076362"},{"product_id":"45959-furuno-nmea-0183-antenna-cable-f-gp330b","title":"Furuno NMEA 0183 Antenna Cable f\/GP330B - 7 Pin - 15M","description":"Furuno 7-Pin Connector, 15m\/49'\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"overview\"\u003e\n    \u003ch2\u003eEnhance Your Marine Navigation Setup with Reliable Connectivity\u003c\/h2\u003e\n    \u003cp\u003eWhether you're out on the open water charting courses or monitoring weather patterns, seamless data flow between your devices is crucial for safe and efficient boating. This specialized Furuno NMEA 0183 antenna cable delivers that reliability, bridging your PB200 weatherfax receiver to Furuno NavNet systems and RD30 displays via a precise 7-pin NMEA 0183 connection. Stretching a full 15 meters, it offers the flexibility to position your antennas exactly where they're needed without signal compromise.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"features\"\u003e\n    \u003ch2\u003eKey Features for Peak Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePrecision 7-Pin Design:\u003c\/strong\u003e Engineered specifically for Furuno's NMEA 0183 protocols, ensuring plug-and-play compatibility with GP330B GPS\/WAAS plotters and related gear.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended 15-Meter Reach:\u003c\/strong\u003e Provides ample length for installations on larger vessels, from sailboats to fishing charters, without the need for extensions that could introduce noise.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eShielded Construction:\u003c\/strong\u003e High-quality shielding minimizes electromagnetic interference (EMI) from onboard electronics, maintaining clean data transmission for accurate positioning and nav data.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eDurable Marine-Grade Materials:\u003c\/strong\u003e Built to withstand harsh saltwater environments, UV exposure, and constant vibration, promising long-term dependability on deck.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow Signal Loss:\u003c\/strong\u003e Optimized for NMEA 0183 baud rates, supporting real-time sharing of GPS, depth, speed, and weatherfax info across your network.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"compatibility\"\u003e\n    \u003ch2\u003eSeamless Integration Across Furuno Ecosystems\u003c\/h2\u003e\n    \u003cp\u003eThis cable shines in Furuno-centric setups. Pair it effortlessly with the PB200 for feeding weatherfax images to your NavNet chartplotters or RD30 multi-data displays. It's a go-to for GP330B users upgrading their antenna connections, ensuring your plotter receives uninterrupted NMEA sentences like GGA, RMC, and more. Think of it as the backbone for integrating legacy NMEA gear with modern Furuno networks—perfect for retrofits on older vessels or expanding multi-station helm layouts.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits\"\u003e\n    \u003ch2\u003eWhy Mariners Trust This Cable for Mission-Critical Links\u003c\/h2\u003e\n    \u003cp\u003eIn the unpredictable marine world, a weak cable link can mean missed weather updates or faulty GPS handoffs. This 15m solution eliminates those risks, offering:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eUninterrupted Data Flow:\u003c\/strong\u003e Keeps your nav systems synchronized, so you stay ahead of squalls or traffic.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCost-Effective Reliability:\u003c\/strong\u003e Avoids frequent replacements common with generic cables that chafe or corrode prematurely.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEasy Routing:\u003c\/strong\u003e Flexible yet rugged build snakes through tight bulkheads and cable runs without kinking.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFuture-Proof Flexibility:\u003c\/strong\u003e Supports bidirectional NMEA 0183 traffic, ready for adding AIS, autopilot, or sonar feeds.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eBoaters report cleaner multifunction display readouts and fewer troubleshooting hours after swapping in this genuine Furuno connector—real-world proof of its edge over off-brand alternatives.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003ePro Tips for Hassle-Free Installation\u003c\/h2\u003e\n    \u003col\u003e\n      \u003cli\u003ePlan your route: Measure from PB200 output to the 7-pin input on your NavNet or RD30, accounting for strain relief loops.\u003c\/li\u003e\n      \u003cli\u003eSecure connections: Use dielectric grease on pins to fend off corrosion in humid cabins.\u003c\/li\u003e\n      \u003cli\u003eTest thoroughly: Power up and verify NMEA sentences via your plotter's diagnostics—look for steady GPS lock and weather data refresh.\u003c\/li\u003e\n      \u003cli\u003eProtect runs: Zip-tie along existing harnesses, avoiding heat sources like engines or exhausts.\u003c\/li\u003e\n      \u003cli\u003eLabel ends: Mark \"PB200 to NavNet\" for quick future access during maintenance seasons.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003eMost installs wrap up in under an hour, even for DIYers, thanks to the intuitive Furuno pinout matching industry standards.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices is this Furuno NMEA 0183 cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's designed for connecting the PB200 weatherfax receiver to Furuno GP330B, NavNet chartplotters, and RD30 displays using a 7-pin NMEA 0183 port.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable and what's its build quality like?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"At 15 meters, it provides generous reach for most boat layouts. Marine-grade shielding and materials ensure resistance to water, UV, and vibration.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this cable support bidirectional NMEA data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it handles standard NMEA 0183 bidirectional communication, allowing GPS positions, weatherfax, and other sentences to flow both ways.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this with non-Furuno NMEA 0183 equipment?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"While optimized for Furuno systems, it works with any standard 7-pin NMEA 0183 devices, but verify pinouts match to avoid issues.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is shielding important for this type of cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—onboard RF noise from VHF radios or engines can corrupt signals. The built-in shielding keeps data crisp and reliable.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I troubleshoot if data isn't flowing after installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Check connections for tightness, confirm baud rate matches (typically 4800), and use your display's NMEA monitor to scan incoming sentences.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the part number for ordering replacements?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Look for Furuno AIR-339-101 to ensure you get the exact 7-pin, 15m NMEA 0183 antenna cable spec.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003eNMEA 0183 Antenna Cable, 7 Pin, 15 Meters \u003cbr\u003e\u003cbr\u003eNMEA 0183 antenna cable, 7-pin, 15 meters Warning: This product can expose you to chemicals known to cause cancer, birth defects or other diseases in California.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34848\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e AIR-339-101\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 801769003925\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536264966237,"sku":"CWR-34848","price":144.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-nmea-0183-antenna-1.jpg?v=1673077041"},{"product_id":"45960-furuno-nmea-0183-antenna-cable-f-gp330b","title":"Furuno NMEA 0183 Antenna Cable f\/GP330B - 7 Pin - 25M","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your marine navigation setup with a reliable connection that stands up to the demands of the open water. This specialized NMEA 0183 antenna cable delivers seamless data transmission between your Furuno GP330B receiver antenna and display unit, ensuring accurate positioning even during extended voyages. At 25 meters long with a robust 7-pin design, it offers the flexibility to position your antenna exactly where it performs best—far from obstructions and interference—while keeping your cockpit clutter-free.\u003c\/p\u003e\n\n  \u003ch2\u003eBuilt for Marine Endurance\u003c\/h2\u003e\n  \u003cp\u003eIn the harsh marine environment, where saltwater spray, relentless UV exposure, and constant vibration are daily realities, ordinary cables fail quickly. This Furuno cable is engineered with premium materials that resist corrosion, flex fatigue, and signal degradation. The black sheathing not only blends discreetly with most boat hardware but also provides extra protection against abrasion from deck gear and rigging. Mariners trust it for its proven track record in commercial fishing fleets and recreational yachts alike, where downtime isn't an option.\u003c\/p\u003e\n\n  \u003ch2\u003eSeamless Integration with GP330B Systems\u003c\/h2\u003e\n  \u003cp\u003eDesigned specifically for the Furuno GP330B GPS\/WAAS receiver antenna, this cable plugs in effortlessly with its precision-machined 7-pin connectors. NMEA 0183 compatibility means it handles standard marine data protocols flawlessly, supporting position, speed, course, and time outputs to your chartplotter or multifunction display. Whether you're upgrading an older setup or extending reach on a larger vessel, the 25-meter length strikes the perfect balance—long enough for transom or arch mounts without introducing excessive signal loss.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Technical Advantages\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eShielded construction minimizes electromagnetic interference from engines, radios, and other onboard electronics.\u003c\/li\u003e\n    \u003cli\u003eLow-loss conductors maintain signal integrity over the full 25-meter run, critical for WAAS-enhanced accuracy down to sub-meter levels.\u003c\/li\u003e\n    \u003cli\u003eFlexible yet durable jacket allows easy routing through tight spaces like bulkheads and cable runs.\u003c\/li\u003e\n    \u003cli\u003eWeatherproof connectors seal out moisture, preventing the common pitfalls of intermittent connections.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eEffortless Installation for DIY Boaters\u003c\/h2\u003e\n  \u003cp\u003eNo need for specialized tools or marine electricians. Simply connect one end to the GP330B antenna base and the other to your receiver unit—color-coded wiring and secure locking pins make it foolproof. For optimal performance, route the cable away from high-power sources and use zip ties or conduit for strain relief. Many users report completing installs in under an hour, getting back to what matters: smooth sailing. Pro tip: Test continuity with a multimeter before finalizing to catch any shipping kinks.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose Furuno for Your Cabling Needs?\u003c\/h2\u003e\n  \u003cp\u003eFuruno's legacy in marine electronics spans decades, with innovations that prioritize real-world reliability over flashy specs. This cable embodies that philosophy—high-performance without complexity. It's not just about connecting wires; it's about linking you reliably to the sea's vast data network. Backed by a solid warranty, it gives peace of mind whether you're chasing fish, cruising coastlines, or crossing oceans.\u003c\/p\u003e\n\n  \u003ch2\u003eReal-World Applications\u003c\/h2\u003e\n  \u003cp\u003eFrom sportfishing boats needing precise trolling motor integration to sailboats relying on autopilot feeds, this cable elevates your GPS system's potential. Pair it with Furuno's ecosystem for layered features like AIS overlays or radar fusion, all dependent on rock-solid antenna links. Offshore racers appreciate the extended length for masthead placements, while liveaboard cruisers value the low-maintenance design that shrugs off tropical storms.\u003c\/p\u003e\n\n  \u003ch2\u003eCaring for Your Investment\u003c\/h2\u003e\n  \u003cp\u003eTo maximize lifespan, inspect connections seasonally for wear and rinse with fresh water after saltwater exposure. Avoid sharp bends (minimum radius 10x cable diameter) and store excess length coiled loosely. With proper care, it outlasts multiple antenna upgrades, proving its value trip after trip.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat is the exact length and connector type of this Furuno antenna cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eThis is a 25-meter NMEA 0183 cable featuring 7-pin connectors, tailored for straightforward Furuno GP330B antenna connections.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable compatible only with the GP330B, or other Furuno models?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily designed for the Furuno GP330B receiver antenna, it aligns perfectly with NMEA 0183 protocols used in many Furuno GPS systems—always verify pinouts for cross-compatibility.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow does the cable handle marine conditions like saltwater and UV light?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eCrafted with corrosion-resistant materials and UV-stabilized sheathing, it's built to endure prolonged exposure, vibration, and flexing typical in boating environments.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes the 25-meter length affect GPS signal quality?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo, thanks to low-loss conductors and shielding, signal integrity remains strong over the full length, supporting high-accuracy WAAS positioning.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation straightforward for non-professionals?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, plug-and-play design with secure pins requires no soldering or crimping—just route carefully and secure for a quick setup.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat warranty comes with this Furuno cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt includes a limited 2-year warranty, reflecting Furuno's confidence in its durability and performance.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this cable be used for weather station antennas?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eWhile optimized for GP330B GPS antennas, similar 7-pin NMEA 0183 extensions work with compatible weather stations—check specific model requirements.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eEquip your vessel with connectivity that matches the sea's challenges. This Furuno NMEA 0183 antenna cable isn't just a wire—it's your lifeline to precise navigation.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eFor over 70 years, Furuno has been continuously imagining and creating new solutions, making new marine electronic equipment with the goal of offering both performance and simplicity for everyone. Not only for men and women who make a living on the seas, but also for those who simply want to enjoy the boating lifestyle. For them, Furuno has become synonymous with quality, performance, and reliability.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno AIR339102 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFuruno GP330B Receiver Antenna\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFuruno AIR339102 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFuruno Products Are Provides Performance And Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eOffering Quality Design\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003eNMEA 0183 Antenna Cable, 7 Pin, 25 Meters \u003cbr\u003e\u003cbr\u003eNMEA 0183 Antenna Cable, 7-pin, 25m Warning This product can expose you to chemicals known to cause cancer, birth defects or other diseases in California.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-34849\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e AIR-339-102\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679309976\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536265031773,"sku":"34849","price":166.69,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-nmea-0183-antenna-1_75f894ee-c918-44ba-9eba-e98164ca9904.jpg?v=1673077047"},{"product_id":"58545-furuno-if-nmea2k2-converter","title":"Furuno IF-NMEA2K2 Converter","description":"Interface Converter NMEA 2000-NMEA 0183\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description\"\u003e\n  \u003cdiv class=\"overview\"\u003e\n    \u003cp\u003eBridge the gap between legacy and modern marine electronics effortlessly with a reliable interface designed for seamless data translation. This compact converter handles bidirectional communication, ensuring your boat's systems talk the same language whether you're upgrading gear or mixing equipment from different eras. Perfect for sailors, anglers, and offshore adventurers who demand precision without the hassle of mismatched protocols.\u003c\/p\u003e\n  \u003c\/div\u003e\n\n  \u003csection class=\"key-benefits\"\u003e\n    \u003ch2\u003eWhy Boat Owners Choose This Converter\u003c\/h2\u003e\n    \u003cp\u003eIn the demanding world of marine navigation, compatibility issues can disrupt your voyage. This device solves that by translating data between older serial standards and today's networked setups, keeping critical info like position, speed, and heading flowing smoothly across your dashboard.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eRugged Marine Protection:\u003c\/strong\u003e Built to withstand spray and splashes with an IP55 waterproof rating, it thrives in rough seas and humid cockpits.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eProven Durability:\u003c\/strong\u003e Engineered for extreme conditions, from pounding waves to salty air, delivering unflinching performance mile after mile.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEffortless Setup:\u003c\/strong\u003e Plug-and-play design minimizes wiring headaches, getting you back on the water faster.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCompact and Versatile:\u003c\/strong\u003e Small footprint fits anywhere, powering up on standard 12-volt systems without fuss.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"conversion-modes\"\u003e\n    \u003ch2\u003eSmart Modes for Every Scenario\u003c\/h2\u003e\n    \u003cp\u003eTailor data speed to your needs with three intelligent operating modes:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eStandard Mode:\u003c\/strong\u003e Handles everyday conversions between serial and network formats for GPS, depth sounders, and instruments.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eHigh-Speed Mode:\u003c\/strong\u003e Accelerates heading and sensor data for autopilot systems, ensuring responsive steering even in tight maneuvers or autopilot reliance.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAIS Mode:\u003c\/strong\u003e Optimized for Automatic Identification System traffic, prioritizing collision avoidance data without lag.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eSwitch modes as conditions change—from casual cruising to high-stakes racing—maximizing efficiency and reducing network clutter.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-use\"\u003e\n    \u003ch2\u003eReal-World Applications on the Water\u003c\/h2\u003e\n    \u003cp\u003eImagine integrating that trusty old chartplotter with a new multifunction display, or linking legacy radar to a CAN-based network. This converter shines in mixed fleets:\u003c\/p\u003e\n    \u003cfigure\u003e\n      \u003cimg src=\"placeholder-image.jpg\" alt=\"Marine electronics setup with data converter bridging NMEA systems\" loading=\"lazy\"\u003e\n      \u003cfigcaption\u003eTypical integration: Old GPS feeds into modern network for unified displays.\u003c\/figcaption\u003e\n    \u003c\/figure\u003e\n    \u003cp\u003eWhether retrofitting a classic vessel or expanding a cutting-edge setup, it supports smooth data sharing for safer, smarter boating. Users report fewer dropouts and crisper autopilot responses after installation.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-tips\"\u003e\n    \u003ch2\u003eQuick Installation Guide\u003c\/h2\u003e\n    \u003cp\u003eGetting started is straightforward:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003ePower off all devices and disconnect batteries.\u003c\/li\u003e\n      \u003cli\u003eMount in a dry, accessible spot using included hardware.\u003c\/li\u003e\n      \u003cli\u003eConnect NMEA0183 wires to serial ports (RX\/TX\/GND).\u003c\/li\u003e\n      \u003cli\u003eLink NMEA2000 drop cable to your backbone.\u003c\/li\u003e\n      \u003cli\u003eSupply 12V DC power and select your mode via switches.\u003c\/li\u003e\n      \u003cli\u003eTest data flow on displays—watch headings update in real-time.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \u003cp\u003ePro tip: Use terminators on network ends and keep cable runs under 6 meters for best results. Always double-check polarity to avoid gremlins.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat formats does this converter support?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt translates bidirectionally between NMEA0183 serial data and NMEA2000\/CAN bus networks, covering common marine sentences like GGA, RMC, HDG, and more.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs it suitable for autopilot integration?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, the high-speed mode boosts sensor data transmission, ideal for responsive autopilot control in dynamic conditions.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow waterproof is the unit?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eRated IP55, it resists water jets and dust, making it reliable for exposed deck mounts or engine room use.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat power does it require?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eOperates on 12-volt DC systems common in boats, drawing minimal current for efficient runtime.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan it handle AIS data specifically?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—the dedicated AIS mode ensures fast, prioritized handling of target tracks and safety messages.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it support multiple devices?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt facilitates network sharing, allowing one converter to feed data to multiple NMEA2000 displays or vice versa.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat's the best mode for general cruising?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eStandard mode works great for routine nav data like position and depth across mixed systems.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\u003cp\u003eFor over 70 years, Furuno has been continuously imagining and creating new solutions, making new marine electronic equipment with the goal of offering both performance and simplicity for everyone. Not only for men and women who make a living on the seas, but also for those who simply want to enjoy the boating lifestyle. For them, Furuno has become synonymous with quality, performance, and reliability.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFuruno IFNMEA2K2 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eConvert CAN Bus Format Data To NMEA0183 Format Data And NMEA0183 Format Data To CAN Bus Format Data\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eVoltage: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e12 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFuruno IFNMEA2K2 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eIP55 Rating Waterproof\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eHigh-Performance Products Proven In The Harshest Of Environments\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eOffering Quality Design\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy To Install\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eIF-NMEA2K2\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 \/ CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode dedicated to AIS data are available in one compact unit. With these three modes, you can optimize the conversion speed depending on the situational requirements. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eIn addition to the regular conversion mode, the high-speed mode (used to convert sensor data for the autopilot) and the AIS mode dedicated to AIS data can also be used in a compact model.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-47434\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e IF-NMEA2K2\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 611679345332\u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536280662109,"sku":"CWR-47434","price":312.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-if-nmea2k2-converter-1.jpg?v=1673077943"},{"product_id":"58697-garmin-gnt-153-10-nmea-tranceiver-f-quatix-153","title":"Garmin GNT\u0026#153;10 NMEA Tranceiver f\/quatix\u0026#153;","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eImagine you're out on the water, skippering a yacht through choppy seas or fine-tuning your sail trim during a regatta. Your Garmin quatix watch is strapped to your wrist, but how do you get critical boat data like wind speed, water depth, or GPS position streaming directly to it without a tangle of cables? That's where the Garmin GNT 10 NMEA Transceiver steps in, bridging your vessel's NMEA 2000 network to the reliable ANT wireless protocol for seamless, real-time connectivity.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlocking Wireless Boat Data for On-Wrist Insights\u003c\/h2\u003e\n  \u003cp\u003eThis compact transceiver acts as a gateway, pulling essential NMEA 2000 information from your marine electronics and beaming it over ANT to compatible devices like the quatix series. No more glancing back at the helm display or relying on bulky portables—keep your eyes on the horizon while staying informed.\u003c\/p\u003e\n  \n  \u003cp\u003eKey data streams include:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eGPS essentials:\u003c\/strong\u003e Precise position, speed over ground (SOG), course over ground (COG), and heading for navigation confidence.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnvironmental reads:\u003c\/strong\u003e Air temperature to gauge conditions, plus water depth, speed through water (STW), and temperature for depth sounder integration.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWind intelligence:\u003c\/strong\u003e Apparent wind angle\/speed (AWA\/AWS), true wind over ground, and velocity made good (VMG) to optimize your sails or motor efficiency.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNav data fusion:\u003c\/strong\u003e Waypoints, routes, and next waypoint info when paired with your multifunction display (MFD).\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eSafety First: Automatic Man Overboard (MOB) Alerts\u003c\/h2\u003e\n  \u003cp\u003eOne standout capability is automatic MOB detection. If a crew member goes overboard, the GNT 10 relays the precise position and activation signal to your quatix watch instantly. This wrist-based alert can be a lifesaver, enabling quick response without diverting attention from steering. Pair it with your MFD for full-system MOB activation, creating a layered safety net for family cruises or competitive racing.\u003c\/p\u003e\n\n  \u003ch2\u003eEasy Setup for Real-World Boating\u003c\/h2\u003e\n  \u003cp\u003eInstallation is straightforward for most setups: connect the GNT 10 directly to your NMEA 2000 backbone via a drop cable. It draws power from the network, keeping things tidy. Once powered, it auto-discovers compatible ANT devices like quatix watches. In the quatix app or device menu, enable the data fields you want—GPS, wind, or depth—and you're broadcasting live.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip for sailors: During upwind legs, monitor VMG to wind on your watch to make micro-adjustments without crew calls. Anglers benefit from water temp overlays on GPS tracks to spot bait balls. Cruisers love the freedom of checking depth alarms discreetly while at the wheel.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Go Wireless with ANT and NMEA 2000?\u003c\/h2\u003e\n  \u003cp\u003eTraditional wired connections limit mobility, but ANT's low-power, long-range wireless (up to 30 meters line-of-sight) lets you roam the deck. It's robust against interference in salty, humid marine environments, and since it's Garmin's ecosystem, expect rock-solid pairing with quatix 5, 6, or 7 models. This setup elevates your boating from reactive to proactive, blending smartwatch convenience with pro-grade marine data.\u003c\/p\u003e\n\n  \u003ch2\u003eBoost Performance Across Your Fleet\u003c\/h2\u003e\n  \u003cp\u003eBeyond watches, the GNT 10 enhances connectivity for other ANT-enabled Garmin gear, like some bike computers repurposed for coastal tours or fitness trackers on longer passages. It's a versatile add-on for anyone serious about data-driven decisions on the water, whether chasing personal bests or ensuring crew safety.\u003c\/p\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What does the Garmin GNT 10 NMEA Transceiver do?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It transmits select NMEA 2000 data wirelessly via ANT to devices like quatix watches, enabling on-wrist access to GPS, wind, water, and navigation info without cables.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the GNT 10 compatible with all quatix models?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it works with ANT-enabled quatix series watches, such as quatix 5, 6, and 7, for data sharing from your NMEA 2000 network.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How does automatic MOB detection work with this transceiver?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"When MOB is triggered on the NMEA 2000 network, the GNT 10 sends the position and alert to your paired quatix watch for immediate wrist notification.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What kind of installation is required for the GNT 10?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Connect it to your NMEA 2000 backbone with a drop cable; it powers itself from the network and pairs wirelessly with ANT devices—no complex wiring needed.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can the GNT 10 share wind data from my instruments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—it relays apparent wind, true wind over ground, and VMG to wind from compatible NMEA 2000 sensors to your watch.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the wireless range of the ANT connection?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"ANT provides reliable connectivity up to about 30 meters (100 feet) in typical marine conditions, ideal for deck mobility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with non-Garmin MFDs?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, as long as your MFD outputs standard NMEA 2000 data, the GNT 10 will transmit compatible PGNs over ANT to Garmin wearables.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat does the Garmin GNT 10 NMEA Transceiver do?\u003c\/h3\u003e\n      \u003cp\u003eIt transmits select NMEA 2000 data wirelessly via ANT to devices like quatix watches, enabling on-wrist access to GPS, wind, water, and navigation info without cables.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the GNT 10 compatible with all quatix models?\u003c\/h3\u003e\n      \u003cp\u003eYes, it works with ANT-enabled quatix series watches, such as quatix 5, 6, and 7, for data sharing from your NMEA 2000 network.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow does automatic MOB detection work with this transceiver?\u003c\/h3\u003e\n      \u003cp\u003eWhen MOB is triggered on the NMEA 2000 network, the GNT 10 sends the position and alert to your paired quatix watch for immediate wrist notification.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat kind of installation is required for the GNT 10?\u003c\/h3\u003e\n      \u003cp\u003eConnect it to your NMEA 2000 backbone with a drop cable; it powers itself from the network and pairs wirelessly with ANT devices—no complex wiring needed.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan the GNT 10 share wind data from my instruments?\u003c\/h3\u003e\n      \u003cp\u003eAbsolutely—it relays apparent wind, true wind over ground, and VMG to wind from compatible NMEA 2000 sensors to your watch.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the wireless range of the ANT connection?\u003c\/h3\u003e\n      \u003cp\u003eANT provides reliable connectivity up to about 30 meters (100 feet) in typical marine conditions, ideal for deck mobility.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes it work with non-Garmin MFDs?\u003c\/h3\u003e\n      \u003cp\u003eYes, as long as your MFD outputs standard NMEA 2000 data, the GNT 10 will transmit compatible PGNs over ANT to Garmin wearables.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cb\u003eGNT™ 10 NMEA Transceiver\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe GNT 10 provides the ability to transmit NMEA 2000® data over the wireless ANT network to devices such as quatix™ GPS-enabled marine navigation watch.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConnectivity\u003c\/b\u003e\u003cbr\u003eEnables mobile connectivity and advanced features for devices such as quatix, including:\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 data monitoring\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic MOB detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003eTransmit select NMEA 2000 data over ANT wireless\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eGPS position, velocity and heading\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNavigation data through pairing with MFD\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir temperature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWater (depth, speed, temperature)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWind (apparent, over ground, VMG to wind)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomatic MOB detection\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe GNT 10 NMEA transceiver MFG 010-01134-00 can transmit NMEA 2000 data to devices such as quatix GPS marine watches via a wireless ANT network. ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-47586\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-01134-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759106904\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536282693725,"sku":"CWR-47586","price":129.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gnt-153-10-1.jpg?v=1673078067"},{"product_id":"59137-furuno-10m-nmea200-backbone-cable-f-pb200","title":"Furuno 10M NMEA200 Backbone Cable f\/PB200 \u0026 200WX","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003csection\u003e\n    \u003ch2\u003eEnhance Your Marine Network with Reliable Connectivity\u003c\/h2\u003e\n    \u003cp\u003eBuilding a robust NMEA2000 network on your vessel starts with the right backbone components. This 10-meter backbone cable delivers seamless integration for Furuno's precision instruments like the PB200 barometer and 200WX weather station. Crafted for harsh marine conditions, it ensures stable data transmission across your onboard electronics, from GPS to autopilot systems.\u003c\/p\u003e\n    \u003cp\u003eUnlike shorter cables that limit layout flexibility, this extended length allows for optimal routing around bulkheads and equipment bays, minimizing signal loss and maximizing network efficiency. Boat owners and installers appreciate its plug-and-play design, which cuts down setup time while upholding Furuno's reputation for durability in saltwater environments.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eKey Features for Superior Performance\u003c\/h2\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eExtended Reach:\u003c\/strong\u003e 10 meters of backbone provides ample length for complex installations without the need for multiple junctions.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eNMEA2000 Compliant:\u003c\/strong\u003e Fully adheres to the standard, supporting drop cables and T-connectors for easy expansion.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMarine-Grade Build:\u003c\/strong\u003e Double-shielded construction resists electromagnetic interference from engines and radios.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eWeatherproof Connectors:\u003c\/strong\u003e Self-sealing Micro-C fittings lock out moisture, ensuring long-term reliability even in pounding seas.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eLow Power Draw:\u003c\/strong\u003e Efficient cabling supports power distribution across the backbone, reducing voltage drop over distance.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \u003cp\u003eThese features make it a go-to choice for upgrading legacy NMEA0183 setups to modern, high-speed networking.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003ePerfect Compatibility for Furuno Systems\u003c\/h2\u003e\n    \u003cp\u003eDesigned specifically for the PB200 precision barometer and 200WX all-in-one weather sensor, this cable slots effortlessly into Furuno's ecosystem. It pairs with multifunction displays, chartplotters, and radars, creating a unified dashboard for real-time barometric pressure, wind data, and more.\u003c\/p\u003e\n    \u003cp\u003eExpand your network confidently—compatible with other NMEA2000 devices from leading brands, it future-proofs your setup for upcoming upgrades. Installers note its straightforward integration reduces troubleshooting, letting you focus on what matters: smooth sailing.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eInstallation Tips for Flawless Setup\u003c\/h2\u003e\n    \u003cp\u003eStart by planning your backbone route away from high-heat sources and heavy machinery. Secure the cable with non-abrasive clips every 30-50 cm to prevent chafing. Use a backbone terminator at each end to maintain signal integrity—essential for networks longer than 10 meters.\u003c\/p\u003e\n    \u003cp\u003eFor the PB200 or 200WX, connect via drop cables to tee into the backbone at convenient access points. Test the network post-install using diagnostic tools to verify data flow. Pro tip: Label all connections for quick maintenance during offshore voyages.\u003c\/p\u003e\n    \u003cblockquote\u003e\"This cable transformed our weather monitoring—accurate readings every time, no glitches.\" – Experienced offshore sailor\u003c\/blockquote\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eWhy It Outshines Standard Alternatives\u003c\/h2\u003e\n    \u003cp\u003eIn a sea of generic cables, Furuno's engineering shines through with superior shielding and flexibility. It handles the twists and turns of real-world boat layouts better than stiff competitors, while its UV-resistant jacket withstands years of sun exposure on deck runs.\u003c\/p\u003e\n    \u003cp\u003eOwners report fewer network dropouts compared to off-brand options, translating to safer navigation with dependable instrument data. Invest in quality that matches Furuno's precision sensors for a network you can trust mile after mile.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection\u003e\n    \u003ch2\u003eLong-Term Maintenance and Care\u003c\/h2\u003e\n    \u003cp\u003eInspect connectors annually for corrosion—wipe with fresh water and dielectric grease if needed. Avoid sharp bends (minimum radius 50mm) to preserve internal conductors. In multi-vessel fleets, standardize on this cable for consistent performance across your operation.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What devices is this NMEA2000 backbone cable designed for?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It's optimized for Furuno PB200 barometer and 200WX weather station, but works with any NMEA2000 compatible marine electronics.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How long is the Furuno 10M NMEA2000 backbone cable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Precisely 10 meters, ideal for mid-sized vessels needing extended backbone runs without excess splicing.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is this cable suitable for outdoor marine use?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, featuring marine-grade shielding, waterproof connectors, and UV resistance for reliable exposure to saltwater, sun, and vibration.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use this cable to expand my existing NMEA2000 network?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—add drop cables and T-connectors to integrate more sensors while maintaining backbone integrity.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What makes this backbone cable different from drop cables?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Backbone cables form the main highway for power and data; drop cables are shorter spurs connecting individual devices to it.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I need terminators with this cable?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, install 120-ohm terminators at both ends of the backbone to prevent signal reflections and ensure stable communication.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I troubleshoot connection issues?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Check for secure Micro-C connections, verify terminators, and use NMEA2000 diagnostic software to scan for errors.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e10M NMEA2000 Backbone Cable for PB200  \u003cbr\u003e\u003cbr\u003eThe product is made of high-quality materials and can provide you with many years of service. Use the most advanced technology to design and consider the customer. It will meet your needs...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48026\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e AIR-331-104-01\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e \u003cbr\u003e\n            ","brand":"Furuno","offers":[{"title":"Default Title","offer_id":32536306319453,"sku":"48026","price":146.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/furuno-10m-nmea200-backbone-1.jpg?v=1673078718"},{"product_id":"59663-fusion-nmea-2000-60-39-extension-cable","title":"FUSION NMEA 2000 60\u0026#39; Extension Cable","description":"\u003cp\u003eFusion Electronics make products that are engineered on the inside for life on the outside. We do this so our customers can make the most of the time they spend pursuing their passions. With over 19,000 associates in 35 countries around the world, we bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We think every day is an opportunity to innovate and a chance to beat yesterday.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eFusion Electronics AB00085320 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eFusion Stereos\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e66 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eFusion Electronics AB00085320 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eFor Use With Fusion Stereos\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eNMEA 2000 Certified\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompelling Design, Superior Quality\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eDesigned And Engineered For The Marine Environment\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000 60' Extension Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCable measures 60' (20 Meters)\u003c\/p\u003e\u003cp\u003eFUSION's NMEA 2000 60' Extension Cable \u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eTo extend the length of the NMEA 2000 or FUSION network to accommodate more wired remote devices, you need to use the CAB-000853-20 20 Mtr (65 ft) NMEA 2000 extension cable.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48552\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e CAB000853-20\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9419523302286\u003cbr\u003e\n            ","brand":"FUSION","offers":[{"title":"Default Title","offer_id":32536358355037,"sku":"48552","price":48.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/fusion-nmea-2000-60-1.jpg?v=1673080310"},{"product_id":"59769-garmin-nmea-2000-power-isolator","title":"Garmin NMEA 2000 Power Isolator","description":"NMEA 2000, Power Isolator\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003csection class=\"introduction\"\u003e\n    \u003cp\u003eSetting up a reliable NMEA 2000 network on your vessel requires careful attention to power management. The Garmin NMEA 2000 Power Isolator steps in as a crucial component, preventing potential conflicts that arise when multiple devices try to supply power to the bus. Designed specifically for marine environments, this compact yellow plastic accessory ensures your network runs smoothly, avoiding ground loops and voltage irregularities that could disrupt chartplotters, sensors, and other connected gear.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"why-it-matters\"\u003e\n    \u003ch2\u003eWhy Power Isolation is Essential for Your NMEA 2000 Setup\u003c\/h2\u003e\n    \u003cp\u003eIn a typical NMEA 2000 backbone, devices like multifunction displays, transducers, and engines can inadvertently backfeed power into the network. Without proper isolation, this leads to erratic behavior—think flickering screens, false sensor readings, or total system shutdowns. By electrically separating the power from individual devices and the main system supply, this isolator maintains a single, stable power source, promoting longevity and peak performance across your marine electronics ecosystem.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eEliminates risks from devices that act as power suppliers\u003c\/li\u003e\n      \u003cli\u003ePrevents interference in multi-drop networks\u003c\/li\u003e\n      \u003cli\u003eSimplifies troubleshooting during commissioning\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eEffortless Integration into Your Marine Network\u003c\/h2\u003e\n    \u003cp\u003eIntegrating the power isolator is straightforward, fitting seamlessly into standard NMEA 2000 drop cables or T-connectors. Position it near potential power-injecting devices, such as Garmin chartplotters or third-party sensors. Connect the input from your primary 12V power source to one side, and the network backbone to the other—its drop-in design means no special tools or modifications are needed.\u003c\/p\u003e\n    \u003cp\u003ePro tip: During initial setup, power down the entire network, insert the isolator, then test segment by segment. This methodical approach catches issues early, saving hours on the water. It's particularly handy in complex setups with engines, autopilots, and VHF radios all sharing the bus.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-expanded\"\u003e\n    \u003ch2\u003eKey Advantages for Boaters and Installers\u003c\/h2\u003e\n    \u003cp\u003eBeyond basic separation, this isolator enhances overall system reliability. It supports the plug-and-play nature of NMEA 2000 while safeguarding against real-world marine challenges like corrosion-prone connections and power surges from alternators. Boaters report fewer intermittent faults, especially in rough seas where vibrations exacerbate poor wiring.\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eRugged plastic construction withstands harsh saltwater exposure\u003c\/li\u003e\n      \u003cli\u003eCompact footprint for tight console spaces\u003c\/li\u003e\n      \u003cli\u003eCompatible with Garmin's full suite of marine networking products\u003c\/li\u003e\n      \u003cli\u003eBoosts network uptime for safer navigation\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"troubleshooting-tips\"\u003e\n    \u003ch2\u003eCommon NMEA 2000 Power Problems and How This Solves Them\u003c\/h2\u003e\n    \u003cp\u003eEver dealt with a \"no data\" error despite solid wiring? Often, it's power-related. Symptoms include devices dropping offline randomly or inconsistent GPS fixes. Installing the isolator isolates these culprits, ensuring clean 12V delivery. For retrofits on older boats, it's a quick upgrade that modernizes your setup without rewiring the backbone.\u003c\/p\u003e\n    \u003cp\u003ePair it with proper fusing and backbone termination for a bulletproof network—certified installers swear by this combo for professional-grade results.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faq-section\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhat exactly does the Garmin NMEA 2000 Power Isolator do?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eIt electrically isolates power sources on the NMEA 2000 bus, preventing devices from backfeeding power and causing conflicts with the main supply.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhen should I install an NMEA 2000 Power Isolator?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eUse it during any NMEA 2000 network installation or expansion where multiple devices might supply power, such as chartplotters or engines.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eIs this isolator compatible with non-Garmin devices?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eYes, it's designed for standard NMEA 2000 networks, working with any compliant devices from various manufacturers.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eHow do I know if my network needs power isolation?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eSigns include intermittent device communication, voltage fluctuations on the bus, or errors when adding new sensors—common in unisolated setups.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eCan this isolator handle marine conditions?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eAbsolutely—its durable plastic housing resists corrosion and moisture, ideal for saltwater boating environments.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eDoes it affect network speed or data transmission?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003eNo, it only manages power; data flows unimpeded at full NMEA 2000 speeds (250 kbps).\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n      \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n        \u003ch3 itemprop=\"name\"\u003eWhere does the isolator go in the network layout?\u003c\/h3\u003e\n        \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n          \u003cp itemprop=\"text\"\u003ePlace it between the primary power insertion point (like a fuse block) and the backbone, especially near power-providing devices.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"final-thoughts\"\u003e\n    \u003cp\u003eInvesting in the Garmin NMEA 2000 Power Isolator isn't just about fixing problems—it's about building a resilient foundation for your marine electronics. Whether you're outfitting a new center console or upgrading a cruiser, this small device delivers big reliability, letting you focus on the horizon ahead.\u003c\/p\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101158000 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eEnsure Sources That Could Power The Bus Separated Properly During Installation Of NMEA2000 Network\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eYellow\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eMaterial: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003ePlastic\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101158000 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eUse Our Power Isolator To Ensure Sources That Could Power The Bus Are Separated Properly During Installation Of The NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSome NMEA 2000 Devices Can Potentially Provide Power To The NMEA 2000 Bus\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eNMEA 2000 Power Isolator Makes Sure The NMEA 2000 Power From The Device And The System Power Are Kept Separate\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101158000 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eNMEA 2000 Power Isolator\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eUse our NMEA 2000 power isolator to ensure sources that could power the bus are separated properly during installation of the NMEA 2000 network. \u003cbr\u003e\u003cbr\u003eGarmin 010-11580-00 is a NMEA 2000 power isolator. It ensures that the power source that can supply power properly isolates the bus during the installation of the NMEA 2000 network.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-48658\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11580-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759904463\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536363630685,"sku":"48658","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-power-1_cd0e139a-14ba-41b0-bcc8-e3396c21e425.jpg?v=1673080423"},{"product_id":"48013-garmin-marine-heading-sensor-nmea-2000","title":"Garmin Marine Heading Sensor NMEA 2000 - 6M Cable","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eImagine navigating choppy waters with crystal-clear radar images that don't jitter or drift, giving you confidence whether you're dodging obstacles at dusk or tracking distant targets during a fishing expedition. The Garmin Marine Heading Sensor NMEA 2000 cable with a 6-meter length steps in as the unsung hero, bridging your heading sensor to the NMEA 2000 network for precise, stabilized marine electronics performance.\u003c\/p\u003e\n\n  \u003cp\u003eThis sleek black cable isn't just a wire—it's engineered to deliver uninterrupted data flow, ensuring your Garmin radar systems like the GMR 18 HD+ or 24 xHD series capture accurate boat orientation. Boaters know that even slight heading inaccuracies can throw off autopilot paths or radar overlays, but with this connection, you lock in reliability for safer, smoother voyages.\u003c\/p\u003e\n\n  \u003ch2\u003eUnlocking Precision in Dynamic Marine Conditions\u003c\/h2\u003e\n  \u003cp\u003eOn the water, where wind shifts and waves play tricks on compasses, a solid heading sensor link becomes essential. This 19.7-foot (6m) cable transmits real-time heading data across your NMEA 2000 backbone, stabilizing radar returns and enabling features like Motion Reference Unit (MRU) compensation. Picture overlaying radar echoes perfectly on your chartplotter—no more guesswork when maneuvering in fog or heavy traffic.\u003c\/p\u003e\n\n  \u003cp\u003eUnlike basic extensions, this Garmin-specific cable minimizes signal loss over distance, supporting high-speed data rates vital for open-array radars such as the GMR 406. It's the difference between frustrating ghosting on your display and razor-sharp target acquisition that helps you spot buoys, debris, or other vessels from afar.\u003c\/p\u003e\n\n  \u003ch2\u003eTechnical Edge for Seamless Integration\u003c\/h2\u003e\n  \u003cp\u003eCrafted with marine-grade materials, the cable withstands saltwater spray, UV exposure, and constant flexing from boat motion. Its NMEA 2000 connectors snap into place with drop-in ease, certified for plug-and-play across Garmin's ecosystem. Key specs include a robust 6-meter reach—long enough for flexible routing from helm to sensor without excess slack—and a compact profile that tucks neatly into tight console spaces.\u003c\/p\u003e\n\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 19.7 feet (6 meters) for versatile installations\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Discreet black to blend with onboard gear\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e Full NMEA 2000 compliance for backbone connectivity\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003ePerfect Pairing with Garmin Radar Pedestals\u003c\/h2\u003e\n  \u003cp\u003eDesigned shoulder-to-shoulder with Garmin's radar lineup, this cable shines with GMR 18 HD+, GMR 24 xHD series, GMR 404\/406 pedestals, and GMR 406 open arrays. It feeds heading data directly to the pedestal, activating advanced stabilization that counters heel, pitch, and yaw—critical for sailboats or planing hulls pushing speed limits.\u003c\/p\u003e\n\n  \u003cp\u003eExpand your setup effortlessly: Link it to compatible chartplotters, autopilots, or multifunction displays for a unified network where heading info powers everything from route following to collision avoidance. Boaters upgrading from magnetic compasses report dramatically improved radar MARPA tracking, turning potential near-misses into non-events.\u003c\/p\u003e\n\n  \u003ch2\u003eInstallation Insights from Seasoned Skippers\u003c\/h2\u003e\n  \u003cp\u003eSetting it up is straightforward, even for weekend warriors. Route the cable along existing NMEA 2000 dropships or T-connectors, secure with zip ties away from heat sources like engines, and power cycle your network. Pro tip: Position the heading sensor low and forward, away from ferrous metals, for optimal fluxgate accuracy—this cable ensures that data reaches your displays uncompromised.\u003c\/p\u003e\n\n  \u003cp\u003eCommon pitfalls? Over-tightening connectors or running parallel to AC power lines, which introduce noise. With this shielded cable, interference drops to negligible levels, letting you focus on the horizon instead of troubleshooting.\u003c\/p\u003e\n\n  \u003ch2\u003eElevate Safety and Performance Onboard\u003c\/h2\u003e\n  \u003cp\u003eHeading stability translates to tangible wins: Smoother autopilot corrections in crosswinds, pinpoint accurate chart radar fusion, and enhanced situational awareness during night runs. Anglers benefit from steady sonar overlays, while cruisers gain peace of mind with reliable obstacle detection.\u003c\/p\u003e\n\n  \u003cp\u003eGarmin's commitment to innovation shines here—products like this embody rugged utility without fluff, helping you outpace yesterday's setups. Whether trailering to new waters or living aboard, this cable fortifies your electronics against the elements, promising years of dependable service.\u003c\/p\u003e\n\n  \u003ch2\u003eMaintenance for Long-Term Reliability\u003c\/h2\u003e\n  \u003cp\u003eKeep it performing like new with simple habits: Rinse with fresh water after saltwater exposure, inspect connectors for corrosion quarterly, and store excess length coiled loosely. Avoid sharp bends under 2-inch radius to preserve internal conductors. Most users find it thrives with minimal intervention, underscoring Garmin's marine-grade toughness.\u003c\/p\u003e\n\n  \u003csection itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What does the Garmin Marine Heading Sensor NMEA 2000 cable do?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It connects your heading sensor to the NMEA 2000 network, transmitting precise boat orientation data to stabilize radar and other marine electronics.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Which Garmin radars is this 6m cable compatible with?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's fully compatible with GMR 18 HD+, GMR 24 xHD series, GMR 404\/406 radar pedestals, and GMR 406 open arrays, enabling heading-based stabilization.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable and why that length?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"At 19.7 feet (6 meters), it offers ample reach for most helm-to-sensor runs without needing extensions, reducing signal degradation risks.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation difficult for beginners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No—NMEA 2000 plug-and-play design makes it simple. Just connect to existing backbone points and power up your system.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can this cable improve radar performance in rough seas?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, by delivering accurate heading data, it stabilizes radar images against boat motion, sharpening target detection in waves or wind.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What makes this cable suitable for harsh marine environments?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Marine-grade shielding, UV resistance, and flexible construction handle saltwater, sun, and vibration without failing.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Primarily optimized for Garmin systems, but as a standard NMEA 2000 cable, it shares heading data network-wide with compatible third-party gear.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat does the Garmin Marine Heading Sensor NMEA 2000 cable do?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt connects your heading sensor to the NMEA 2000 network, transmitting precise boat orientation data to stabilize radar and other marine electronics.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhich Garmin radars is this 6m cable compatible with?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's fully compatible with GMR 18 HD+, GMR 24 xHD series, GMR 404\/406 radar pedestals, and GMR 406 open arrays, enabling heading-based stabilization.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the cable and why that length?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAt 19.7 feet (6 meters), it offers ample reach for most helm-to-sensor runs without needing extensions, reducing signal degradation risks.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs installation difficult for beginners?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo—NMEA 2000 plug-and-play design makes it simple. Just connect to existing backbone points and power up your system.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan this cable improve radar performance in rough seas?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, by delivering accurate heading data, it stabilizes radar images against boat motion, sharpening target detection in waves or wind.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat makes this cable suitable for harsh marine environments?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMarine-grade shielding, UV resistance, and flexible construction handle saltwater, sun, and vibration without failing.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemprop=\"acceptedAnswer\" itemscope itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003ePrimarily optimized for Garmin systems, but as a standard NMEA 2000 cable, it shares heading data network-wide with compatible third-party gear.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101141900 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eGMR ™ 18 HD+\/ GMR ™ 24 xHD Series\/ GMR ™ 404\/406 Radar Pedestal\/ GMR ™ 406 Open Array\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e19.7 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101141900 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eConnects Heading Sensor To NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With GMR ™ 18 HD, 18 XHD\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101141900 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eMarine Heading Sensor NMEA 2000 - 6M Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnect a heading sensor to a NMEA 2000 network with this 19.7 ft (6 m) cable.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eWe love outdoor activities and know that having the best equipment is essential for any new adventure. Our selected collection focuses on top brands from the marine, leisure and outdoor markets...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-36902\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11419-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759099244\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536388403293,"sku":"CWR-36902","price":88.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-marine-heading-sensor-1.jpg?v=1673081155"},{"product_id":"60278-fusion-non-powered-nmea-2000-drop-cable","title":"FUSION Non Powered NMEA 2000 Drop Cable f\/MS-RA205 \u0026amp; MS-BB300 to NMEA 2000 T-Connector","description":"\u003cp\u003e\u003cstrong\u003eNon Powered NMEA 2000 Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCable measures 36\"\u003c\/p\u003e\u003cp\u003eFUSION's Non Powered NMEA 2000 Drop Cable connects from the MS-RA205 \u0026amp; MS-BB300 to the NMEA 2000 T-Connector.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eWarning: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, please visit.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-49167\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e CAB000863\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9419523302224\u003cbr\u003e\n            ","brand":"FUSION","offers":[{"title":"Default Title","offer_id":32536433229917,"sku":"CWR-49167","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/fusion-non-powered-nmea-1.jpg?v=1673081777"},{"product_id":"60279-fusion-powered-drop-cable-f-ms-av700-or-ms-ip700","title":"FUSION Powered Drop Cable f\/MS-AV700 or MS-IP700 to NMEA 2000 T-Connector","description":"\u003cp\u003e\u003cstrong\u003ePowered Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThree (3) feet in length.\u003c\/p\u003e\u003cp\u003eFUSION's Powered Drop Cable connects a MS-AV700 or MS-IP700 Stereo to a NMEA 2000 backbone via T-Connector.  Will also connect a MS-AV700 or MS-IP700 to a MS-RX200o or MS-RX300 remote.\u003c\/p\u003e \u003cbr\u003e\u003cbr\u003eElectric floor-standing cables FUSIONs electric floor-standing cables connect from MSAV700 or MSIP700 to NMEA 2000 TConnector.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-49168\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e CAB000859\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 9419523302231\u003cbr\u003e\n            ","brand":"FUSION","offers":[{"title":"Default Title","offer_id":32536433295453,"sku":"49168","price":17.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/fusion-powered-drop-cable-1.jpg?v=1673081782"},{"product_id":"48876-garmin-nmea-2000-starter-kit","title":"Garmin NMEA 2000 Starter Kit","description":"NMEA 2000 Starter Kit\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description-content\"\u003e\n  \u003csection class=\"kit-overview\"\u003e\n    \u003cp\u003eSetting up a reliable communication network on your boat just got simpler with this essential starter kit designed for marine enthusiasts. Whether you're upgrading your chartplotter setup or linking multiple sensors for seamless data sharing, this bundle provides the foundational pieces to get your NMEA 2000 system up and running without the hassle of sourcing parts individually.\u003c\/p\u003e\n    \n    \u003cp\u003eImagine effortlessly connecting your fishfinder, GPS, and engine data displays—all talking to each other in real-time. That's the power of a well-built NMEA 2000 backbone, and this kit delivers everything needed for a basic installation on smaller vessels or as the core of a larger expansion.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"whats-included\"\u003e\n    \u003ch2\u003eComplete Kit Components for Easy Setup\u003c\/h2\u003e\n    \u003cp\u003eThis thoughtfully curated package equips you with all the cables and connectors required for a plug-and-play network. Here's a breakdown:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003e2-meter Drop Cable:\u003c\/strong\u003e Perfect for short runs from the backbone to individual devices like transducers or multifunction displays.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e10-meter Backbone Cable:\u003c\/strong\u003e Forms the main highway for data transmission across your boat's deck, long enough for most setups.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003e2-meter Power Cable:\u003c\/strong\u003e Ensures stable 12V power distribution to keep your network energized.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eT-Connectors (x2):\u003c\/strong\u003e Allow branching off the backbone to multiple devices without complex wiring.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMale and Female Terminators:\u003c\/strong\u003e Critical for preventing signal reflections and maintaining network integrity—essential endpoints for any NMEA 2000 chain.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eThese high-quality, weather-resistant components withstand harsh marine environments, from saltwater spray to vibrations during rough seas.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"benefits-section\"\u003e\n    \u003ch2\u003eWhy Boaters Rely on This Starter Kit\u003c\/h2\u003e\n    \u003cp\u003eBeyond the basics, this kit shines in practicality. NMEA 2000 networks enable shared data like speed, depth, wind, and AIS info across compatible devices, reducing clutter and improving decision-making on the water. For instance, pair it with echoMAP series units to overlay sonar readings directly on charts.\u003c\/p\u003e\n    \n    \u003cul\u003e\n      \u003cli\u003e\n\u003cstrong\u003eCost-Effective Foundation:\u003c\/strong\u003e Avoid piecemeal purchases; start strong and expand as needed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eQuick Installation:\u003c\/strong\u003e No soldering or custom crimping—just snap into place with Micro-C connectors.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eFuture-Proof Design:\u003c\/strong\u003e Supports up to 50 devices on a single backbone, ideal for growing setups.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eEnhanced Safety:\u003c\/strong\u003e Real-time engine monitoring and navigation data can prevent mishaps.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003cp\u003eBoat owners report smoother fishing trips and safer passages, with fewer wiring headaches. It's particularly handy for weekend warriors retrofitting older boats without tearing up decks.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"installation-guide\"\u003e\n    \u003ch2\u003eStep-by-Step Installation Tips for Success\u003c\/h2\u003e\n    \u003cp\u003eGetting started is straightforward, but a few pro tips ensure reliability:\u003c\/p\u003e\n    \u003col\u003e\n      \u003cli\u003e\n\u003cstrong\u003ePlan Your Layout:\u003c\/strong\u003e Sketch the backbone route along bulkheads, keeping runs under 100 meters total for optimal speed.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eMount the Power T:\u003c\/strong\u003e Insert the power cable's T-connector near your battery switch, adding an inline fuse for protection.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eBuild the Backbone:\u003c\/strong\u003e Connect T-connectors end-to-end with the 10m cable, terminating both ends.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eAdd Drops:\u003c\/strong\u003e Plug devices into drop cables from T-connectors; power off everything first to avoid shorts.\u003c\/li\u003e\n      \u003cli\u003e\n\u003cstrong\u003eTest and Troubleshoot:\u003c\/strong\u003e Power up and check device recognition. Use a network analyzer if signals drop—common fixes include reseating terminators or checking cable bends.\u003c\/li\u003e\n    \u003c\/ol\u003e\n    \n    \u003cp\u003ePro Tip: Route cables away from high-current lines to minimize interference, and secure with zip ties for longevity.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"real-world-applications\"\u003e\n    \u003ch2\u003eReal-World Applications on the Water\u003c\/h2\u003e\n    \u003cp\u003eFrom coastal cruisers to offshore anglers, this kit powers diverse setups. Connect a GPS antenna to auto-chartplotting, integrate radar for collision avoidance, or link autopilot for hands-free steering. One captain shared how it transformed their center console, syncing live weather data with fuel flow for precise range calculations.\u003c\/p\u003e\n    \n    \u003cp\u003eIt's versatile for kayaks with portable sonar or full sportfishers expanding sensor arrays, always prioritizing rugged durability.\u003c\/p\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"maintenance-tips\"\u003e\n    \u003ch2\u003eLong-Term Maintenance for Peak Performance\u003c\/h2\u003e\n    \u003cp\u003eTo keep your network humming season after season:\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eInspect connections annually for corrosion—clean with dielectric grease.\u003c\/li\u003e\n      \u003cli\u003eAvoid exceeding drop lengths (6m max per device).\u003c\/li\u003e\n      \u003cli\u003eUpdate device firmware for compatibility.\u003c\/li\u003e\n      \u003cli\u003eStore spares: Extra terminators save downtime.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/section\u003e\n\n  \u003csection class=\"faqs\"\u003e\n    \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n      \u003cscript type=\"application\/ld+json\"\u003e\n      {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n        \"mainEntity\": [\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What is an NMEA 2000 network used for on a boat?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"NMEA 2000 is a marine data bus standard that lets compatible devices like chartplotters, sensors, and instruments share information such as GPS position, depth, speed, and engine stats in real-time.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Do I need anything else besides this starter kit?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"For a basic single-device setup, no. For multi-device networks, add more drop cables or extenders as your system grows.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Is this kit compatible with other brands?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, NMEA 2000 is a universal standard, so it works with most marine electronics from various manufacturers, as long as they support the protocol.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"How do I power the NMEA 2000 backbone?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Use the included 2m power cable connected to a 12V DC source, like your boat's battery or distribution panel, through a fused T-connector.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"What if my network isn't communicating properly?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Check terminators at both ends, ensure no excess cable slack, verify power, and confirm device baud rates match (typically 250 kbps).\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Can this kit handle a larger boat network?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Absolutely—it's a scalable starting point. Add backbone extensions and more T-connectors for bigger vessels.\"\n            }\n          },\n          {\n            \"@type\": \"Question\",\n            \"name\": \"Are the cables waterproof and UV resistant?\",\n            \"acceptedAnswer\": {\n              \"@type\": \"Answer\",\n              \"text\": \"Yes, constructed with marine-grade materials to resist saltwater, sun exposure, and abrasion for reliable outdoor use.\"\n            }\n          }\n        ]\n      }\n      \u003c\/script\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat is an NMEA 2000 network used for on a boat?\u003c\/h3\u003e\n        \u003cp\u003eNMEA 2000 is a marine data bus standard that lets compatible devices like chartplotters, sensors, and instruments share information such as GPS position, depth, speed, and engine stats in real-time.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eDo I need anything else besides this starter kit?\u003c\/h3\u003e\n        \u003cp\u003eFor a basic single-device setup, no. For multi-device networks, add more drop cables or extenders as your system grows.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eIs this kit compatible with other brands?\u003c\/h3\u003e\n        \u003cp\u003eYes, NMEA 2000 is a universal standard, so it works with most marine electronics from various manufacturers, as long as they support the protocol.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eHow do I power the NMEA 2000 backbone?\u003c\/h3\u003e\n        \u003cp\u003eUse the included 2m power cable connected to a 12V DC source, like your boat's battery or distribution panel, through a fused T-connector.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eWhat if my network isn't communicating properly?\u003c\/h3\u003e\n        \u003cp\u003eCheck terminators at both ends, ensure no excess cable slack, verify power, and confirm device baud rates match (typically 250 kbps).\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eCan this kit handle a larger boat network?\u003c\/h3\u003e\n        \u003cp\u003eAbsolutely—it's a scalable starting point. Add backbone extensions and more T-connectors for bigger vessels.\u003c\/p\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"faq-item\"\u003e\n        \u003ch3\u003eAre the cables waterproof and UV resistant?\u003c\/h3\u003e\n        \u003cp\u003eYes, constructed with marine-grade materials to resist saltwater, sun exposure, and abrasion for reliable outdoor use.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101144200 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eUsed To: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBuild A Basic NMEA 2000 Network On Boat\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eIncludes: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eNMEA 2000 Drop Cable\/Backbone Cable\/T-Connector And Terminator Kit\/Power Cable With T-Connector Kit\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101144200 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eStarter Kit Has Everything You Need To Build A Basic NMEA 2000 Network On Your Boat\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eKit Features 2 Meter Drop Cable, 10 Meter Backbone Cable, 2 Meter Power Cable\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ® CHIRP 52cv, 52dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101144200 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000 starter kit includes:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDo you need to build a basic NMEA 2000 network? Look no further than our NMEA 2000 starter kit. This kit includes an NMEA 2000 drop cable (2 m), NMEA 2000 backbone cable (6 m), NMEA 2000 power cable (2 m), two NMEA 2000 T-connectors, NMEA 2000 male terminator and NMEA 2000 female terminator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 drop cable (2M)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 backbone cable (6M)\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 T-connector and terminator kit\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 power cable with T-connector kit\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eThe NMEA 2000 starter kit includes: Do you need to build a basic NMEA 2000 network? Nothing but our NMEA 2000 starter kit. The kit includes NMEA 2000 drop cable (2 m),...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37765\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11442-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759100766\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536455512157,"sku":"37765","price":96.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-starter-1.jpg?v=1673082184"},{"product_id":"48886-garmin-gra-10-rudder-angle-nmea-2000","title":"Garmin GRA 10 Rudder Angle NMEA 2000 Analog Adapter","description":"GRA10, Rudder Angle Adapter\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eImagine breathing new life into your boat's aging helm setup without ripping out every gauge or sensor. The Garmin GRA 10 Rudder Angle NMEA 2000 Analog Adapter does just that, bridging the gap between trusty old analog rudder feedback and the crisp, network-driven world of modern marine electronics. Boaters who've been sailing with traditional potentiometer-style rudder sensors for years know the frustration of incompatible displays and missed data integration. This compact adapter steps in as the hero, seamlessly converting those analog signals into reliable NMEA 2000 data packets ready for your Garmin chartplotters, multifunction displays, or autopilot systems.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Your Vessel Needs the GRA 10 Adapter\u003c\/h2\u003e\n  \u003cp\u003eIn the marine world, rudder position data isn't just nice to have—it's essential for precise autopilot control, safety maneuvers, and performance monitoring. Without it on your NMEA 2000 backbone, you're flying half-blind during long passages or tight docking. The GRA 10 changes that by plugging directly into your existing rudder angle sensor (typically a simple pot wired to your helm). It then broadcasts the info across the network, letting you glance at real-time rudder angles on devices like the Garmin GMI 20, GPSMAP series, or GHC autopilots. No more guesswork; just accurate feedback that enhances every voyage.\u003c\/p\u003e\n  \n  \u003cp\u003eBoat owners upgrading from legacy systems rave about the simplicity. One offshore cruiser shared how it revived a 15-year-old setup, syncing rudder data with wind instruments and engine telemetry for a fully unified dashboard. It's not about replacing gear—it's about smart evolution that saves time, money, and frustration.\u003c\/p\u003e\n\n  \u003ch2\u003eHow the Adapter Transforms Analog to Digital\u003c\/h2\u003e\n  \u003cp\u003eAt its core, the GRA 10 is a plug-and-play signal conditioner. Connect your analog rudder sensor's output wires to the adapter's terminals, hook it to your NMEA 2000 drop cable (included at 16 feet for flexible routing), and power draws straight from the bus—no extra batteries or fuss. The device samples the varying voltage from the sensor as the rudder turns, digitizes it, and pushes PGN 127245 (Rudder) messages onto the network.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip for installers: Calibrate during setup by swinging the rudder full port to starboard via your Garmin display's configuration menu. This ensures zero-point accuracy, critical for autopilot gains. Waterproof pigtails and rugged construction mean it thrives in engine rooms or lazarettes, shrugging off spray and vibration.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Technical Specs at a Glance\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Ultra-compact at 31\/32\" W x 43\/64\" H x 3 3\/32\" L (24.7 x 17.0 x 78.6 mm)—fits anywhere.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 16 ft. (4.9 m) for easy backbone integration.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -15°C to 70°C (5°F to 158°F)—handles extremes from tropics to tundras.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompass Safety:\u003c\/strong\u003e Just 2 inches (5 cm) minimum distance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePower Draw:\u003c\/strong\u003e 9-16 VDC from NMEA 2000 bus, 1.1W max, LEN 2 (100 mA)—network-friendly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e Pure NMEA 2000—no proprietary headaches.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Benefits for Boaters\u003c\/h2\u003e\n  \u003cp\u003eBeyond specs, the GRA 10 delivers tangible wins. Autopilot users gain tighter tracking with true rudder feedback, reducing wear on hydraulic rams. Race teams monitor helm response for tactical edges, while cruisers enjoy peace of mind with networked alerts if the rudder hangs up. It's a low-cost entry to \"glass cockpit\" bliss, compatible with most analog sensors outputting 0-5V or 0-30V ranges—check your pot's specs for a perfect match.\u003c\/p\u003e\n  \n  \u003cp\u003eFor multi-station helms, it shines: One adapter per sensor keeps data consistent across flybridge and salon displays. Pair it with Garmin's ecosystem, and you've got a scalable network that grows with your boat.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat types of analog rudder sensors work with the Garmin GRA 10?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt supports most standard marine potentiometer sensors outputting linear voltage (like 0-5VDC or similar). Verify your sensor's voltage range matches the 9-16V input tolerance for best results.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need to replace my existing rudder feedback pot?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo! The GRA 10 reuses your current analog pot, converting its signal without any mechanical changes.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I integrate it with my Garmin autopilot?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eConnect to your NMEA 2000 network, then use the autopilot's setup wizard to detect and calibrate the rudder feedback PGN. It auto-populates on compatible GHC units.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the GRA 10 waterproof for open installations?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, with an IPX7-equivalent rating on connectors and housing, it's built for harsh marine environments but mount it away from constant immersion.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it share data with non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely—standard NMEA 2000 PGNs mean compatibility with Raymarine, Simrad, Lowrance, and others on the bus.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the power consumption impact on my network?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eMinimal at 100mA (LEN 2), it won't strain even basic 3-amp backbones.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the included cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003e16 feet (4.9 meters), plenty for most routing from sensor to drop.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n  \n  \u003cp\u003eReady to digitize your helm? The Garmin GRA 10 isn't just an adapter—it's your ticket to smarter sailing.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101132400 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eInterface: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eNMEA 2000\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eVoltage Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 To 16 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eWith Cable: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eYes\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101132400 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eWith The GRA 10 Rudder Angle Analog Adapter Aboard Your Vessel, You Can Give New Life To Your Old Gauges By Making The Transition From Analog To Digital\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSimple-To-Install Adapter Takes The Data Generated By Traditional Analog Gauges And Converts The Data Into A NMEA 2000® Signal\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eWith The Garmin GRA 10 Adapter, You Can Convert Analog Information Provided Via The Rudder-Angle Sensor On Your Boat To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGRA 10 Allows You To Observe Rudder-Angle Information On Compatible Garmin Display Devices Connected To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101132400 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GRA10RudderAngleAdapter_InstallationandConfigurationInsturctions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGRA10RudderAngleAdapter_InstallationandConfigurationInsturctions.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132400 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eThe new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age.  Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format.  The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display.  The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. \u003cbr\u003e\u003cbr\u003eWith the help of the ship's GRA 10 rudder angle analog adapter, you can extend the life of your old instruments by transitioning from analog to digital. This simple...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37775\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11324-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759098469\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536456069213,"sku":"CWR-37775","price":227.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gra-10-rudder-1.jpg?v=1673082204"},{"product_id":"48887-garmin-get-10-engine-tilt-nmea-2000","title":"Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter","description":"\u003csection\u003e\n    \u003ch2\u003eUnlock Modern Boat Instrumentation with the Garmin GET 10 Adapter\u003c\/h2\u003e\n    \u003cp\u003eImagine glancing at your helm and seeing precise engine tilt data alongside your GPS charts and fuel levels—all without ripping out your trusty old gauges. The Garmin GET 10 Engine Tilt NMEA 2000 Analog Adapter bridges that gap, transforming analog signals from your boat's tilt sensor into crisp digital NMEA 2000 data. Boat owners upgrading to Garmin's ecosystem swear by this compact powerhouse for keeping costs down while boosting functionality.\u003c\/p\u003e\n    \n    \u003ch2\u003eHow the GET 10 Simplifies Your Helm Upgrade\u003c\/h2\u003e\n    \u003cp\u003eTraditional analog gauges served us well, but today's multifunction displays demand digital feeds. The GET 10 taps into your existing engine tilt sensor—think those from popular outboards like Mercury or Yamaha—and outputs reliable NMEA 2000 signals. Connect it to your network, and suddenly your Garmin chartplotter or instrument display shows real-time trim position, helping you optimize performance on the water.\u003c\/p\u003e\n    \n    \u003cp\u003eWhy does this matter? Proper trim adjustment can shave knots off your top speed or improve fuel efficiency during long cruises. No more guesswork; get data-driven insights that feel like having a pro tuner aboard.\u003c\/p\u003e\n    \n    \u003ch2\u003eStandout Features Tailored for Marine Use\u003c\/h2\u003e\n    \u003cul\u003e\n        \u003cli\u003e\n\u003cstrong\u003eNMEA 2000 Ready:\u003c\/strong\u003e Plugs seamlessly into any compatible network, broadcasting tilt data to devices like the GMI series or GPSMAP chartplotters.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eRugged Build:\u003c\/strong\u003e Handles harsh marine environments with a temperature range from 5°F to 158°F (-15°C to 70°C), plus 9-16V operation for battery-powered boats.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eIncludes Cable:\u003c\/strong\u003e Drop-in installation with everything you need, minimizing wiring hassles.\u003c\/li\u003e\n        \u003cli\u003e\n\u003cstrong\u003eBacked Reliability:\u003c\/strong\u003e Garmin's limited 2-year warranty ensures peace of mind on extended voyages.\u003c\/li\u003e\n    \u003c\/ul\u003e\n    \n    \u003ch2\u003eReal Benefits for Everyday Boaters\u003c\/h2\u003e\n    \u003cp\u003eRetrofitting a boat's dash can be a nightmare—expensive and labor-intensive. The GET 10 changes that. Saltwater anglers use it to monitor trim while trolling lures at perfect depths. Offshore cruisers integrate it for better engine management during rough seas. Even weekend warriors appreciate the clean, clutter-free helm that blends old-school reliability with new-school smarts.\u003c\/p\u003e\n    \n    \u003cp\u003ePro tip: Pair it with other Garmin analog adapters for a full digital overhaul. Your network grows smarter, feeding data to apps via Garmin Marine Network for on-shore planning too.\u003c\/p\u003e\n    \n    \u003ch2\u003eEffortless Installation for DIY Enthusiasts\u003c\/h2\u003e\n    \u003cp\u003eMost installs take under an hour. Locate your engine's tilt sender (usually near the transom), splice the GET 10's wires per color code, and T-connector into your NMEA backbone. Power it from the same 12V circuit as your gauges. Calibrate via your Garmin display's menu—trim fully up\/down to set endpoints. Test on the water: watch the digital readout mirror your physical trim tab movements. Common pitfalls? Double-check polarity to avoid reversed readings.\u003c\/p\u003e\n    \n    \u003cp\u003eFor multi-engine setups, one GET 10 per tilt sensor keeps everything synced across displays.\u003c\/p\u003e\n    \n    \u003ch2\u003eCompatibility That Expands Your Options\u003c\/h2\u003e\n    \u003cp\u003eWorks with virtually any analog tilt sensor outputting resistance-based signals. Garmin verifies it with their GMI 10\/20, GPSMAP, and ECHOMAP lines. Extend to third-party NMEA displays too—universal protocol means broader integration. If your boat runs CAN bus engines, it complements without conflicts.\u003c\/p\u003e\n    \n    \u003ch2\u003eTips to Maximize Performance and Longevity\u003c\/h2\u003e\n    \u003cp\u003eSecure the unit away from bilge spray. During winterization, disconnect to prevent corrosion. Regularly inspect connections for saltwater buildup. Firmware updates via Garmin's tools keep it cutting-edge. Users report years of flawless service, even in commercial fishing ops.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What exactly does the Garmin GET 10 adapter convert?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"It converts analog resistance signals from your boat's engine tilt\/trim sensor into NMEA 2000 digital data, letting you display trim position on modern Garmin instruments.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the GET 10 compatible with my existing Garmin displays?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, it integrates smoothly with GMI series instruments, GPSMAP chartplotters, and other NMEA 2000-equipped Garmin marine devices.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What power requirements does it have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Operates on 9-16V DC, perfect for standard 12V boat electrical systems.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use it with non-Garmin tilt sensors?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Absolutely—works with most analog tilt senders from brands like Mercury, Yamaha, and Suzuki, as long as they provide variable resistance output.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"How do I install the Garmin GET 10?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Connect to your tilt sensor wires, add power\/ground, and join your NMEA 2000 backbone with the included T-connector. Calibrate trim positions on your display.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What environmental conditions can it handle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Rated from 5°F to 158°F (-15°C to 70°C), making it suitable for extreme marine weather.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does it come with a warranty?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, backed by Garmin's limited 2-year warranty for marine products.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can it support multi-engine boats?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"One unit per engine tilt sensor—one for port, one for starboard—ensures accurate data from each.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\u003cp\u003eWith the GET 10 Engine Tilt and Trim Analog Adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 (R) signal so you can create or expand your network without replacing all of the equipment on your boat. With the Garmin GET 10 adapter, you can convert analog information provided via the engine-tilt sensor (not included) on your boat to your NMEA 2000 network. The GET 10 allows you to observe engine-tilt information on compatible Garmin display devices connected to your NMEA 2000 network. The NMEA 2000 analog adapters from Garmin are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the GMI ™ 10 Marine Instrument Display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101132500 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eInterface: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eNMEA 2000\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eVoltage Rating: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 To 16 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eWith Cable: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eYes\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101132500 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eNMEA 2000 Analog Adapters From Garmin Are Easy To Add To Any Existing Marine Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eEasy-To-Use Set-Up Will Help You Bring Your Older Dashboard Into The Digital Age\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGET 10 Allows You To Observe Engine-Tilt Information On Compatible Garmin Display Devices Connected To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eTemperature Range: From 5 Degree Fahrenheit To 158 Degree Fahrenheit\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 2 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101132500 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GET10EngineTiltAdapter_InstallationandConfigurationInsturctions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGET10EngineTiltAdapter_InstallationandConfigurationInsturctions.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132500 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eThe new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age.  Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format.  The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display.  The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. \u003cbr\u003e\u003cbr\u003eWith the help of the on-board GET 10 engine tilt\/fine-tuning analog adapter, you can achieve the transition from analog to digital, so that your old gauges have a new look. This simple...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37776\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11325-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759098476\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536456298589,"sku":"CWR-37776","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-get-10-engine-1.jpg?v=1673082212"},{"product_id":"48888-garmin-gfl-10-fluid-level-nmea-2000","title":"Garmin GFL 10 Fluid Level NMEA 2000 Analog Adapter","description":"GFL10, Fluid Level Adapter\u003cbr\u003e\u003cbr\u003e\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your boat's monitoring system without the hassle of ripping out old equipment. The Garmin GFL 10 Fluid Level NMEA 2000 Analog Adapter bridges the gap between legacy analog fluid sensors and modern digital networks, letting you track tank levels like fuel or water right on your Garmin displays. Boaters love how this compact device revitalizes dashboards, turning outdated gauges into seamless data feeds across your NMEA 2000 backbone.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose the Garmin GFL 10 for Your Vessel?\u003c\/h2\u003e\n  \u003cp\u003eImagine glancing at your multifunction display to see precise fluid levels instead of squinting at faded analog dials. This adapter captures signals from existing tank sensors—those resistive types common on most boats—and translates them into reliable NMEA 2000 data. No more guesswork on long offshore runs; get real-time insights that integrate perfectly with Garmin's ecosystem, enhancing safety and efficiency on the water.\u003c\/p\u003e\n  \u003cp\u003ePerfect for retrofitting older boats, it saves you thousands by preserving your current sensors. Saltwater corrosion and vibration? This rugged unit handles it, operating smoothly from chilly 5°F mornings to scorching 158°F afternoons. Its black housing blends into any helm, and the 16-foot cable reaches tricky installations without extensions.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Features That Make a Difference\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAnalog-to-Digital Magic:\u003c\/strong\u003e Converts fluid-level sensor outputs (0-5V or 0-250 ohms) into NMEA 2000 PGN 127505 for fluid level monitoring.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Drop it into your NMEA 2000 network powered by the bus itself (9-16VDC), drawing just 1W max—no extra wiring headaches.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eVersatile Compatibility:\u003c\/strong\u003e Works with Garmin chartplotters like ECHOMAP UHD and Ultra series, GPSMAP models, GMI 20 instruments, and more. View data on high-res screens for customizable dashboards.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact and Tough:\u003c\/strong\u003e Measures a slim 3-3\/32\" x 31\/32\" x 43\/64\", mounting anywhere from bulkheads to consoles.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBacked by Garmin Reliability:\u003c\/strong\u003e Built for marine environments with a limited 1-year warranty, ensuring peace of mind.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eReal-World Benefits for Boaters\u003c\/h2\u003e\n  \u003cp\u003eWhether you're a weekend cruiser or serious offshore angler, accurate fluid monitoring prevents surprises. Pair it with Garmin's GMI 10 or 20 for dedicated analog-style readouts with digital precision—fuel remaining as a percentage, low-level alarms, and trend graphs. It shines in multi-tank setups, distinguishing between port\/starboard fuel or freshwater\/holding tanks via simple configuration.\u003c\/p\u003e\n  \u003cp\u003eExpert tip: Calibrate during install for spot-on accuracy. Fill tanks to full\/empty and quarter marks, then use your Garmin display's setup menu to match readings. This beats factory defaults, especially if your sensors have aged unevenly from ethanol fuels or bio-diesel.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Installation Guide\u003c\/h2\u003e\n  \u003cp\u003eGetting started takes under an hour for most setups. Disconnect power, connect your analog sensor leads (typically black to ground, colored to signal), then T-connector into the NMEA 2000 drop cable. Power cycles automatically. Use Garmin's intuitive software—no PC needed—to assign tank instances and set units (US gallons, liters, etc.).\u003c\/p\u003e\n  \u003cp\u003eCommon pitfalls? Double-check polarity and resistance range; most boat sensors are 240-33 ohms full-to-empty (US standard) or 10-180k ohms (Euro). Test continuity to avoid false empties mid-trip. Secure with zip ties against engine vibes for longevity.\u003c\/p\u003e\n\n  \u003ch2\u003eSpecifications at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 20px;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f2f2f2;\"\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Input\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9-16 VDC from NMEA 2000 bus\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Draw\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e1W maximum\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e16 feet (4.9 m)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eDimensions (L x W x H)\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e3-3\/32\" x 31\/32\" x 43\/64\" (78.6 x 24.7 x 17.0 mm)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eOperating Temperature\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e5°F to 158°F (-15°C to 70°C)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eColor\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat types of fluid sensors work with the Garmin GFL 10?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt supports common marine resistive sensors (e.g., 0-250 ohms, 240-33 ohms) and voltage-output types (0-5V). Check your sensor's specs—most boat fuel, water, and waste tanks are compatible.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDo I need to replace my existing tank sensors?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eNo! The GFL 10 reads directly from your analog sensors, saving you the labor and cost of new digital ones.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow do I configure tank levels on my Garmin display?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eVia the display's NMEA 2000 menu: Select fluid instance, calibrate at empty\/full, and assign tank type\/location. It's straightforward with on-screen prompts.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan it monitor multiple tanks?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eYes, one GFL 10 per tank. Daisy-chain on the NMEA 2000 bus and label instances (e.g., Fuel Port, Water) for organized views.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs the GFL 10 waterproof?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eIt's rated for harsh marine conditions but mount it in a dry area away from direct spray. IPX7-like protection keeps it reliable.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat if my readings are inaccurate after install?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eRecalibrate: Drain\/refill to known levels and adjust points. Clean sensor probes if fouled by sediment or fuel varnish.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with non-Garmin NMEA 2000 displays?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cp itemprop=\"text\"\u003eAbsolutely, as it outputs standard PGNs readable by any compliant MFD from Raymarine, Simrad, Lowrance, etc.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eTransform your helm today—reliable fluid tracking starts with the Garmin GFL 10, the smart choice for savvy skippers.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eThe NMEA 2000 analog adapters from Garmin are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the GMI™ 10 Marine Instrument Display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101132600 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eECHOMAP™ UHD, ECHOMAP™ Ultra, GMI™ 20, GPSMAP(R)\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Input: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 To 16 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDimensions: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3-3\/32 Inch Length X 31\/32 Inch Width X 43\/64 Inch Height\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eTemperature Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Degree To 158 Degree Fahrenheit\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101132600 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eGive New Life To Your Old Gauges By Making The Transition From Analog To Digital\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSimple-To-Install Adapter Takes The Data Generated By Traditional Analog Gauges And Converts The Data Into A NMEA 2000® Signal\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eWith The GFL 10 Adapter, You Can Convert Analog Information Provided Via The Fluid-Level Sensor On Your Boat To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGFL 10 Allows You To Observe Fluid-Level Information On Compatible Garmin Display Devices Connected To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101132600 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GFL10FluidLevelAdapter_InstallationandConfigurationInsturctions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGFL10FluidLevelAdapter_InstallationandConfigurationInsturctions.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132600 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132600 Technical Bulletins\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/TechnicalBulletins\/Technical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eTechnical_Reference_for_Garmin_NMEA_2000_Products_EN-US.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eThe new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age.  Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format.  The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display.  The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. \u003cbr\u003e\u003cbr\u003e\"With the GFL 10 fluid level analog adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat. With the GFL 10 adapter, you can convert analog information provided via the fluid-level sensor on your boat to your NMEA 2000 network. The GFL 10 allows you to observe fluid-level information on compatible Garmin display devices connected to your NMEA 2000 network.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37777\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11326-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759098483\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536456429661,"sku":"CWR-37777","price":198.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gfl-10-fluid-1.jpg?v=1673082219"},{"product_id":"48889-garmin-gbt-10-bennett-trim-tab-nmea","title":"Garmin GBT 10 Bennett Trim Tab NMEA 2000 Analog Adapter","description":"GBT10, Bennett Trim Tab Adapter\u003cbr\u003e\u003cbr\u003e\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eTransform Your Boat's Helm with Seamless Analog-to-Digital Integration\u003c\/h2\u003e\n  \u003cp\u003eImagine gliding across open waters with precise control over your vessel's trim tabs, all displayed crisply on modern Garmin screens—without the hassle of ripping out your trusted Bennett setup. The Garmin GBT 10 Bennett Trim Tab NMEA 2000 Analog Adapter bridges that gap effortlessly, breathing new life into legacy analog gauges. Boaters upgrading to digital networks love how this compact black device with its generous 16-foot cable lets you monitor trim tab positions right alongside engine data, depth readings, and GPS charts on compatible Garmin displays.\u003c\/p\u003e\n  \n  \u003cp\u003eWhether you're chasing trophy fish on a weekend charter or navigating coastal cruises, maintaining optimal trim enhances fuel efficiency, speed, and handling. This adapter captures signals from your Bennett Trim Tab Position Indicator or sensors, digitizes them, and broadcasts via NMEA 2000—unlocking a unified dashboard that feels custom-built for performance boating.\u003c\/p\u003e\n\n  \u003ch2\u003eKey Advantages for Serious Mariners\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Network Expansion:\u003c\/strong\u003e Plug into your existing NMEA 2000 backbone to share trim data with Garmin GMI series instruments, GPSMAP multifunction displays, and more—no full overhaul required.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePreserve Your Investment:\u003c\/strong\u003e Keep reliable Bennett hardware while embracing digital precision; ideal for older vessels getting a tech refresh.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReal-Time Visibility:\u003c\/strong\u003e Watch port and starboard tab positions live, aiding quick adjustments for smoother rides in choppy seas or heavy loads.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Marine Build:\u003c\/strong\u003e Handles harsh conditions from chilly mornings to sweltering afternoons, powered directly from the NMEA bus for simple wiring.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBoosted Situational Awareness:\u003c\/strong\u003e Integrate with other sensors for a holistic view, improving safety during docking, trolling, or high-speed runs.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eStreamlined Setup for Quick Wins on the Water\u003c\/h2\u003e\n  \u003cp\u003eInstallation boils down to connecting three wires: power and ground from your NMEA 2000 drop cable, plus the signal from your Bennett indicator. Mount it discreetly near the helm or tabs, configure via your Garmin display's network settings, and you're broadcasting data in minutes. No specialized tools needed beyond basic marine connectors—perfect for DIY enthusiasts or weekend warriors. Test in calm waters first to verify readings match physical tab movement, then fine-tune for peak accuracy.\u003c\/p\u003e\n  \n  \u003cp\u003ePro tip: Pair it with Garmin's ecosystem for layered insights, like correlating trim adjustments with speed logs or autopilot commands, elevating your boating from good to exceptional.\u003c\/p\u003e\n\n  \u003ch2\u003eTechnical Specifications at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"border-collapse: collapse; width: 100%; margin-bottom: 2em;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f4f4f4;\"\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"border: 1px solid #ddd; padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e16 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eOperating Temperature\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eFrom 5°F to 158°F (from -15°C to 70°C)\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003eInput Voltage\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e9–16 Vdc from NMEA 2000 bus\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003ePower Consumption\u003c\/td\u003e\n        \u003ctd style=\"border: 1px solid #ddd; padding: 12px;\"\u003e0.9 W maximum\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eWhy This Adapter Stands Out in Marine Electronics\u003c\/h2\u003e\n  \u003cp\u003eIn a sea of adapters, the GBT 10 shines for its Garmin-optimized reliability—drawing minimal power to avoid draining batteries during long outings. Saltwater pros swear by it for reducing wiring clutter and enabling over-the-air updates through networked chartplotters. It's not just a converter; it's a gateway to smarter boating, where every data point informs better decisions, from trimming for planing efficiency to stabilizing in beam seas.\u003c\/p\u003e\n\n  \u003csection class=\"faq-section\" aria-labelledby=\"faq-heading\"\u003e\n    \u003ch2 id=\"faq-heading\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n    \n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What devices work with the Garmin GBT 10 Bennett Trim Tab Adapter?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It integrates seamlessly with Garmin GMI series instruments and GPSMAP fish finders via NMEA 2000, displaying trim tab data alongside other network info.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does this adapter replace my Bennett trim tab sensors?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, it reads signals from existing Bennett Trim Tab Position Indicators or sensors, converting them for digital use without hardware swaps.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the cable on the GBT 10?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The included cable measures 16 feet, offering flexible routing from tabs to helm in most setups.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is installation DIY-friendly for boat owners?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely—simple three-wire hookup to NMEA 2000, with configuration through Garmin menus. Basic tools suffice for most installs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What power does the Garmin GBT 10 require?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It draws 9–16 Vdc directly from the NMEA 2000 network, with max consumption under 1W for efficient operation.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this with non-Bennett trim tabs?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Designed specifically for Bennett systems via their position indicators or sensors; check Garmin docs for other analog compatibility.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Will extreme weather affect the adapter's performance?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Built tough for marine life, it operates reliably from 5°F to 158°F, shrugging off typical boating conditions.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-list\"\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat devices work with the Garmin GBT 10 Bennett Trim Tab Adapter?\u003c\/summary\u003e\n        \u003cp\u003eIt integrates seamlessly with Garmin GMI series instruments and GPSMAP fish finders via NMEA 2000, displaying trim tab data alongside other network info.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eDoes this adapter replace my Bennett trim tab sensors?\u003c\/summary\u003e\n        \u003cp\u003eNo, it reads signals from existing Bennett Trim Tab Position Indicators or sensors, converting them for digital use without hardware swaps.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eHow long is the cable on the GBT 10?\u003c\/summary\u003e\n        \u003cp\u003eThe included cable measures 16 feet, offering flexible routing from tabs to helm in most setups.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eIs installation DIY-friendly for boat owners?\u003c\/summary\u003e\n        \u003cp\u003eAbsolutely—simple three-wire hookup to NMEA 2000, with configuration through Garmin menus. Basic tools suffice for most installs.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWhat power does the Garmin GBT 10 require?\u003c\/summary\u003e\n        \u003cp\u003eIt draws 9–16 Vdc directly from the NMEA 2000 network, with max consumption under 1W for efficient operation.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eCan I use this with non-Bennett trim tabs?\u003c\/summary\u003e\n        \u003cp\u003eDesigned specifically for Bennett systems via their position indicators or sensors; check Garmin docs for other analog compatibility.\u003c\/p\u003e\n      \u003c\/details\u003e\n      \u003cdetails\u003e\n        \u003csummary\u003eWill extreme weather affect the adapter's performance?\u003c\/summary\u003e\n        \u003cp\u003eBuilt tough for marine life, it operates reliably from 5°F to 158°F, shrugging off typical boating conditions.\u003c\/p\u003e\n      \u003c\/details\u003e\n    \u003c\/div\u003e\n  \u003c\/section\u003e\n\u003c\/section\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101132700 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eGMI\/ GPSMAP Series Fish Finders\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101132700 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eWith The GBT 10 Trim Tab Analog Adapter Aboard Your Vessel, You Can Give New Life To Your Old Gauges By Making The Transition From Analog To Digital\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSimple-To-Install Adapter Takes The Data Generated By Traditional Analog Gauges And Converts The Data Into A NMEA 2000® Signal So You Can Create Or Expand Your Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eWith The GBT 10 Bennett Trim Tab Adapter, You Can Convert Analog Information Provided Via The Bennett Trim Tab Position Indicator\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGBT 10 Allows You To Observe Trim Tab Information On Compatible Garmin Display Devices Connected To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101132700 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GBT10BennettTrimTabAdapter_InstallationandConfigurationInsturctions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGBT10BennettTrimTabAdapter_InstallationandConfigurationInsturctions.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132700 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eThe new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age.  Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format.  The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display.  The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. \u003cbr\u003e\u003cbr\u003e\"With the GBT 10 Trim Tab analog adapter aboard your vessel, you can give new life to your old gauges by making the transition from analog to digital. This simple-to-install adapter takes the data generated by traditional analog gauges and converts the data into a NMEA 2000 signal so you can create or expand your network without replacing all of the equipment on your boat. With the GBT 10 Bennett Trim Tab adapter, you can convert analog information provided via the Bennett Trim Tab Position Indicator (Bennett TPI) or by the Bennett trim tab sensors on your boat, to your NMEA 2000 network. The GBT 10 allows you to observe trim tab information on compatible Garmin display devices connected to your NMEA 2000 network.\"\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37778\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11327-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759098490\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536456560733,"sku":"CWR-37778","price":160.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gbt-10-bennett-1.jpg?v=1673082227"},{"product_id":"48890-garmin-gst-10-water-speed-temp-nmea","title":"Garmin GST 10 Water Speed Temp NMEA 2000 Analog Adapter","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003cp\u003eUpgrade your boat's aging analog gauges without a full overhaul. The Garmin GST 10 steps in as a smart bridge, transforming traditional water speed and temperature sensor signals into crisp NMEA 2000 digital data. Imagine viewing precise boat speed through choppy waves or monitoring water temps for optimal engine performance—all streamed seamlessly to your Garmin chartplotter or instrument display. Boaters love how this compact adapter breathes new life into legacy setups, saving time and hassle on the water.\u003c\/p\u003e\n\n  \u003ch2\u003eHow the Garmin GST 10 Simplifies Your Marine Network Upgrade\u003c\/h2\u003e\n  \u003cp\u003eTraditional analog sensors have served faithfully for years, but integrating them into modern NMEA 2000 networks often means costly replacements. Enter the GST 10: it plugs directly into your existing paddlewheel speed and temperature sensors, converting their outputs into reliable digital signals at a smooth 5 Hz update rate. This means no more guesswork—your Garmin displays like the GMI 20 or GPSMAP series pull in accurate readings for better navigation decisions, whether you're trolling for fish or pushing through rough seas.\u003c\/p\u003e\n  \n  \u003cp\u003eReal-world perks shine during long outings. Picture calibrating your speed log once and forgetting it, with data flowing network-wide to multiple screens. It's a game-changer for weekend warriors and serious anglers alike, keeping your helm clutter-free and info-rich.\u003c\/p\u003e\n\n  \u003ch2\u003eStandout Features That Deliver On-Water Reliability\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAnalog-to-Digital Magic:\u003c\/strong\u003e Captures signals from standard water speed and temp sensors, outputting NMEA 2000 data ready for your Garmin ecosystem.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Simplicity:\u003c\/strong\u003e Minimal wiring needed; the 16-foot cable reaches most helm locations effortlessly.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eRugged Marine Build:\u003c\/strong\u003e Withstands 5°F to 158°F extremes, powered by 9-16V DC—perfect for harsh saltwater environments.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCompact Footprint:\u003c\/strong\u003e Measures just 3-3\/32\" long, 31\/32\" wide, and 43\/64\" high, tucking neatly behind panels.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNetwork Broadcasting:\u003c\/strong\u003e Shares speed and temp across compatible devices for unified boat monitoring.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eCompatibility That Fits Your Setup\u003c\/h2\u003e\n  \u003cp\u003eDesigned for Garmin loyalists, the GST 10 plays nice with ECHOMAP UHD and Ultra series, GMI 20 instruments, and GPSMAP multifunction displays. It integrates into any NMEA 2000 backbone, letting you layer water data alongside GPS, sonar, and engine info. Check your sensor's output—most legacy paddlewheels pair perfectly, unlocking digital potential without swaps.\u003c\/p\u003e\n\n  \u003ch2\u003eEffortless Installation for DIY Boaters\u003c\/h2\u003e\n  \u003cp\u003eGetting the GST 10 online takes under an hour. Start by powering down your boat's systems. Connect the adapter's leads to your speed sensor (typically red to positive, black to ground, white\/green for speed signal) and temp probe (yellow for signal). Drop the NMEA 2000 drop cable into your network backbone, add T-connectors if needed, and secure with zip ties. Power up, then use your Garmin display's setup menu to calibrate speed over a known distance and verify temp against a thermometer. Pro tip: Test in calm water first to dial in offset for hull speed inaccuracies. No special tools required beyond basic crimpers.\u003c\/p\u003e\n\n  \u003ch2\u003eTechnical Specs at a Glance\u003c\/h2\u003e\n  \u003ctable style=\"width:100%; border-collapse: collapse; border: 1px solid #ddd;\"\u003e\n    \u003cthead\u003e\n      \u003ctr style=\"background-color: #f2f2f2;\"\u003e\n        \u003cth style=\"padding: 12px; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n        \u003cth style=\"padding: 12px; text-align: left;\"\u003eDetails\u003c\/th\u003e\n      \u003c\/tr\u003e\n    \u003c\/thead\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003ePower Input\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e9 to 16 VDC\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eDimensions (L x W x H)\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e3-3\/32\" x 31\/32\" x 43\/64\"\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eCable Length\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003e16 feet\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eOperating Temp Range\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px;\"\u003e5°F to 158°F\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eColor\u003c\/td\u003e\n        \u003ctd style=\"padding: 12px; border-bottom: 1px solid #ddd;\"\u003eBlack\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch2\u003eTips for Long-Term Performance and Troubleshooting\u003c\/h2\u003e\n  \u003cp\u003eKeep your GST 10 humming by rinsing connections after saltwater exposure and inspecting cables for chafe. Common hiccups? Erratic speed often traces to fouled paddlewheels—clean with a soft brush. Temp drifts? Verify probe immersion depth. For network issues, ensure proper termination resistors on your NMEA 2000 bus. This adapter's one-year coverage adds peace of mind, but proactive care extends its life seasons beyond.\u003c\/p\u003e\n\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What sensors work with the Garmin GST 10?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It connects to most standard analog paddlewheel water speed sensors and resistance-based temperature probes, converting their signals for NMEA 2000 use.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Do I need to replace my old sensors to use this adapter?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"No, that's the beauty—keep your existing analog sensors and upgrade to digital displays affordably.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How do I calibrate speed and temperature after installation?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Use your Garmin display's configuration menu: run a known GPS distance for speed offset, and cross-check temp with a reference thermometer.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is the GST 10 waterproof for mounting near the transducer?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It's built for marine environments with a wide temp range, but mount it in a dry helm area away from constant spray for best longevity.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can it share data with non-Garmin NMEA 2000 devices?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, as standard NMEA 2000, it broadcasts to any compliant device on the network, like Lowrance or Simrad.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the update rate for speed and temp data?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It outputs at 5 Hz, providing smooth, responsive readings ideal for real-time boating.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it draw much power from my boat's battery?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Minimal draw on 9-16V systems—won't strain your house battery during extended trips.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat sensors work with the Garmin GST 10?\u003c\/h3\u003e\n      \u003cp\u003eIt connects to most standard analog paddlewheel water speed sensors and resistance-based temperature probes, converting their signals for NMEA 2000 use.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDo I need to replace my old sensors to use this adapter?\u003c\/h3\u003e\n      \u003cp\u003eNo, that's the beauty—keep your existing analog sensors and upgrade to digital displays affordably.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eHow do I calibrate speed and temperature after installation?\u003c\/h3\u003e\n      \u003cp\u003eUse your Garmin display's configuration menu: run a known GPS distance for speed offset, and cross-check temp with a reference thermometer.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eIs the GST 10 waterproof for mounting near the transducer?\u003c\/h3\u003e\n      \u003cp\u003eIt's built for marine environments with a wide temp range, but mount it in a dry helm area away from constant spray for best longevity.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eCan it share data with non-Garmin NMEA 2000 devices?\u003c\/h3\u003e\n      \u003cp\u003eYes, as standard NMEA 2000, it broadcasts to any compliant device on the network, like Lowrance or Simrad.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eWhat's the update rate for speed and temp data?\u003c\/h3\u003e\n      \u003cp\u003eIt outputs at 5 Hz, providing smooth, responsive readings ideal for real-time boating.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"faq-item\"\u003e\n      \u003ch3\u003eDoes it draw much power from my boat's battery?\u003c\/h3\u003e\n      \u003cp\u003eMinimal draw on 9-16V systems—won't strain your house battery during extended trips.\u003c\/p\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\n  \u003cp\u003eReady to modernize your marine electronics? The Garmin GST 10 delivers the reliable data upgrade every captain craves, blending old-school reliability with cutting-edge networking.\u003c\/p\u003e\n\u003c\/div\u003e\u003cp\u003eThe NMEA 2000 analog adapters from Garmin are easy to add to any existing marine network. Once installed, the data from the adapters can be viewed via the GMI™ 20 Marine Instrument Display and other compatible Garmin devices. This easy-to-use set-up will help you bring your older dashboard into the digital age.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101132800 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eECHOMAP™ UHD, ECHOMAP™ Ultra, GMI™ 20, GPSMAP(R)\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003ePower Input: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e9 To 16 Volt\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eDimensions: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e3-3\/32 Inch Length X 31\/32 Inch Width X 43\/64 Inch Height\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCable Length: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e16 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eTemperature Range: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e5 Degree To 158 Degree Fahrenheit\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101132800 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eWith The GST 10 Water Speed And Temperature Analog Adapter Aboard Your Vessel, You Can Give New Life To Your Old Gauges By Making The Transition From Analog To Digital\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eSimple-To-Install Adapter Takes The Data Generated By Traditional Analog Gauges And Converts The Data Into A NMEA 2000® (5 Hurts) Signal\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eWith The Garmin GST 10 Adapter, You Can Convert Analog Information Provided Via The Compatible Water-Speed Sensor, Water-Temperature Sensor\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAllows You To Observe Water-Speed And Water-Temperature Information On Compatible Garmin Display Devices Connected To Your NMEA 2000 Network\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101132800 Installation Instructions\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/InstallationInstructions\/GST10WaterSpeedandTemperatureAdapter_InstallationandConfigurationInsturctions.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGST10WaterSpeedandTemperatureAdapter_InstallationandConfigurationInsturctions.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\n\n            \u003ch3\u003eGarmin 101132800 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003eThe new NMEA 2000 analog adapters are the perfect accessories to bring any helm into the digital age.  Simple to install and easy to set up, the NMEA 2000 adapters take signals generated by traditional analog gauges and sensors and convert that data into NMEA 2000 format.  The data can then be broadcast over NMEA 2000 protocol to the Garmin GMI 10 multifunction instrument display.  The combination of these adapters with a Garmin GMI 10 will transform even the most out-of-date dashboard into a glass, digital helm. \u003cbr\u003e\u003cbr\u003eWith the help of the GST 10 water speed and temperature analog adapter on board, you can give new life to the old water meter by transitioning from analog to digital. This ...\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-37779\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11328-00\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759098506\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536456691805,"sku":"37779","price":199.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-gst-10-water-1.jpg?v=1673082232"},{"product_id":"50510-digital-yacht-nmea-adapter-f-pc","title":"Digital Yacht NMEA Adapter f\/PC","description":"\u003cp\u003eThe NMEA to USB adaptor works on PCs, Macs and Linux computers. It converts NMEA 0183 data, used by many marine systems, into a USB format that can be plugged into most modern computers. The adaptor is a bi-directional device. Therefore, data can be sent to and from systems and supports traditional 4800 baud data or the higher speed 38400 baud rate used by AIS systems. LEDs show data being received and transmitted. Thus helping with interfacing issues and encapsulating all the electronics into the connector. \u003c\/p\u003e\u003cp\u003eThe device creates a virtual COM port on the PC which navigation and charting software can use to read NMEA data. If necessary, multiple adaptors can be connected . This effectively allows the creation of any number of NMEA ports on your PC. Drivers for this device can be downloaded from our website. It's Windows XP\/7\/8\/10 compatible. MAC and Linux\/Raspberry Pie drivers are also available.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNMEA Adapter f\/PC\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe USB to NMEA Serial Adaptor cable is a simple and effective method for connecting NMEA 0183 compatible marine equipment to a PC. Each cable contains a small internal electronic circuit board, housed in the USB connector. This circuitry provides full bi-directional conversion of the serial data and also includes Tx and Rx LEDs which give a visual indication of data traffic on the cable.\u003cbr\u003e\u003cbr\u003e The other end of the cable is bare, tinned wire ended connections which can be quickly connected to the NMEA 0183 compatible equipment with suitable connector block or terminals. The cable is FCC, CE and RoHS compliant.\u003cbr\u003e \u003cbr\u003eThe USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 1 Mbaud. Drivers are available for WinXP, Vista, Win7, LINUX and Mac OS X. \u003cbr\u003e\u003cbr\u003eNmea adapter f\/PC USB to Nmea serial adapter cable is a simple and effective way to connect Nmea 0183 compatible marine equipment to PC. Each cable contains a...\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eConverts NMEA to USB so that your computer can read the data\u003c\/li\u003e\n\u003cli\u003eBidirectional data conversion\u003c\/li\u003e\n\u003cli\u003eUse with our \u003ca href=\"https:\/\/digitalyachtamerica.com\/product\/gps160-nmea0183\/\" target=\"_blank\" style=\"color: rgb(236, 121, 39); font-size: inherit;\"\u003eGPS160\u003c\/a\u003e\u003cspan style=\"color: rgb(236, 121, 39); font-size: inherit;\"\u003e for PC integration\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow cost simple solution\u003c\/li\u003e\n\u003cli\u003eThe computer is able to fit more that one adaptor\u003c\/li\u003e\n\u003cli\u003e4800, 9600, 38400 and 115200 baud compatible\u003c\/li\u003e\n\u003cli\u003eBuilt-in indicator lights flash to show data is receiving and transmitting\u003c\/li\u003e\n\u003cli\u003eEasy plug and play connection to most computers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-39399\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e ZDIGUSBNMEA\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 5013719020035\u003cbr\u003e\n            ","brand":"Digital Yacht","offers":[{"title":"Default Title","offer_id":32536517115997,"sku":"CWR-39399","price":61.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/digital-yacht-nmea-adapter-1.jpg?v=1673084543"},{"product_id":"61579-garmin-nmea-2000-backbone-drop-cable-4m","title":"Garmin NMEA 2000\u0026reg; Backbone\/Drop Cable (4M)","description":"\u003cdiv class=\"product-description-content\"\u003e\n  \u003cp\u003eEnhance your marine electronics setup with the Garmin NMEA 2000 backbone\/drop cable, a reliable 13-foot (4-meter) extension designed for seamless network expansion on the water. Boaters and marine enthusiasts rely on this black cable to connect additional devices or extend the backbone of their NMEA 2000 network, ensuring smooth data sharing across instruments like autopilots, radars, and multifunction displays.\u003c\/p\u003e\n\n  \u003ch2\u003eWhy Choose This Backbone\/Drop Cable for Your Vessel?\u003c\/h2\u003e\n  \u003cp\u003eIn the demanding marine environment, a stable network connection is crucial for safety and performance. This cable simplifies expanding your NMEA 2000 system without signal loss or complexity. Its rugged construction withstands saltwater exposure, vibration, and temperature swings common on boats, delivering consistent connectivity for real-time data like heading, speed, and AIS positions.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEffortless Expansion:\u003c\/strong\u003e Easily add drops for new sensors or instruments, keeping your setup tidy and efficient.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSuperior Build Quality:\u003c\/strong\u003e Engineered with marine-grade materials for durability and long-term reliability.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e Standard NMEA 2000 connectors ensure quick integration into existing Garmin networks.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch2\u003eKey Compatibility for Garmin Marine Systems\u003c\/h2\u003e\n  \u003cp\u003eThis cable works seamlessly with a wide array of Garmin marine products, making it a versatile choice for upgrades. It's perfect for integrating devices such as:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eAIS 300\/600 Blackbox Transceivers for enhanced collision avoidance.\u003c\/li\u003e\n    \u003cli\u003eGBT 10 audio servers and GCL 20 cameras for multimedia and surveillance.\u003c\/li\u003e\n    \u003cli\u003eGHP 12, GHP 20 autopilots, including those for steer-by-wire systems.\u003c\/li\u003e\n    \u003cli\u003eGMI 10\/20 instruments, GPS 19x, GPSMAP series chartplotters, and VHF 200\/300 radios.\u003c\/li\u003e\n    \u003cli\u003eAdditional gear like GDL 40 weather receivers, GET 10 engine transducers, and more.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eWhether you're outfitting a fishing boat, yacht, or sailboat, this cable supports EchoMAP CHIRP models like 52cv and 52dv, helping you build a fully interconnected helm station.\u003c\/p\u003e\n\n  \u003ch2\u003ePractical Tips for Optimizing Your NMEA 2000 Network\u003c\/h2\u003e\n  \u003cp\u003eTo get the most from your marine network, plan your backbone layout thoughtfully—keep total backbone length under recommended limits and use T-connectors for drops. This cable's 13-foot reach is ideal for mid-sized vessels, bridging gaps between power tees and devices without excess slack. Pair it with Garmin's ecosystem for features like autopilot integration, where precise data flow improves steering accuracy and fuel efficiency.\u003c\/p\u003e\n  \u003cp\u003eMarine pros appreciate how Garmin's NMEA 2000 solutions reduce wiring clutter, minimize troubleshooting, and future-proof installations against evolving tech like wireless sensors or app controls.\u003c\/p\u003e\n\n  \u003ch2\u003eThe Garmin Difference in Marine Networking\u003c\/h2\u003e\n  \u003cp\u003eGarmin stands out by combining innovative engineering with user-focused design. This isn't just a cable; it's part of a proven system trusted by captains worldwide for its precision and ease. Backed by responsive support and a commitment to quality, it ensures your time on the water focuses on adventure, not electronics hassles.\u003c\/p\u003e\n\n  \u003cdiv itemscope itemtype=\"https:\/\/schema.org\/FAQPage\"\u003e\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat is an NMEA 2000 backbone\/drop cable used for?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eThis type of cable extends the main backbone of your NMEA 2000 network or creates drop lines to connect individual devices, enabling plug-and-play data sharing across marine electronics like chartplotters, sensors, and radios.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eHow long is the Garmin NMEA 2000 backbone\/drop cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eIt measures 13 feet (4 meters), providing ample length for most boat layouts without creating unnecessary cable runs.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eIs this cable compatible with EchoMAP chartplotters?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eYes, it's fully compatible with models like EchoMAP CHIRP 52cv and 52dv, as well as many other Garmin marine displays and instruments.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat color is the cable, and is it suitable for marine use?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eThe cable is black, blending discreetly on most vessels, and built with marine-grade durability to handle harsh conditions like UV exposure and moisture.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eDoes it work with Garmin autopilots?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eAbsolutely, it supports GHP 12 and GHP 20 autopilot systems, including advanced setups for Viking and Yamaha Helm Master.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eCan I use this to add AIS to my network?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eYes, it's designed for AIS 300\/600 blackbox transceivers, allowing easy integration for real-time vessel tracking and safety.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cdiv itemscope itemprop=\"mainEntity\" itemtype=\"https:\/\/schema.org\/Question\"\u003e\n      \u003ch3 itemprop=\"name\"\u003eWhat's the warranty on this Garmin cable?\u003c\/h3\u003e\n      \u003cdiv itemscope itemprop=\"acceptedAnswer\" itemtype=\"https:\/\/schema.org\/Answer\"\u003e\n        \u003cdiv itemprop=\"text\"\u003eIt comes with a limited 1-year warranty, reflecting Garmin's confidence in its marine-grade construction.\u003c\/div\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cscript type=\"application\/ld+json\"\u003e\n    {\n      \"@context\": \"https:\/\/schema.org\",\n      \"@type\": \"FAQPage\",\n      \"mainEntity\": [\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What is an NMEA 2000 backbone\/drop cable used for?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"This type of cable extends the main backbone of your NMEA 2000 network or creates drop lines to connect individual devices, enabling plug-and-play data sharing across marine electronics like chartplotters, sensors, and radios.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"How long is the Garmin NMEA 2000 backbone\/drop cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It measures 13 feet (4 meters), providing ample length for most boat layouts without creating unnecessary cable runs.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Is this cable compatible with EchoMAP chartplotters?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's fully compatible with models like EchoMAP CHIRP 52cv and 52dv, as well as many other Garmin marine displays and instruments.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What color is the cable, and is it suitable for marine use?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"The cable is black, blending discreetly on most vessels, and built with marine-grade durability to handle harsh conditions like UV exposure and moisture.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Does it work with Garmin autopilots?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Absolutely, it supports GHP 12 and GHP 20 autopilot systems, including advanced setups for Viking and Yamaha Helm Master.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"Can I use this to add AIS to my network?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"Yes, it's designed for AIS 300\/600 blackbox transceivers, allowing easy integration for real-time vessel tracking and safety.\"\n          }\n        },\n        {\n          \"@type\": \"Question\",\n          \"name\": \"What's the warranty on this Garmin cable?\",\n          \"acceptedAnswer\": {\n            \"@type\": \"Answer\",\n            \"text\": \"It comes with a limited 1-year warranty, reflecting Garmin's confidence in its marine-grade construction.\"\n          }\n        }\n      ]\n    }\n    \u003c\/script\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e\u003cp\u003eGarmin make products that are engineered on the inside for life on the outside. We bring GPS navigation and wearable technology to the automotive, aviation, marine, outdoor and fitness markets. We believe every day is an opportunity to innovate and a chance to beat yesterday. We offer products with essential utility, leading-edge technologies, compelling features, and exceptional ease-of-use to create clear differentiators our customers appreciate and desire.\u003cspan id=\"ktxbreaker\"\u003e\u003c\/span\u003e\u003c\/p\u003e\u003ch3\u003eGarmin 101107604 Attributes\u003c\/h3\u003e\n        \u003cul\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eCompatibility: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eAIS™ 300\/600 Blackbox Transceiver GBT™ 10\/ GBT\/GCL\/GDL\/GET\/GFL\/GFS\/GHP 12 Autopilot System\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eLength: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003e13 Feet\u003c\/span\u003e\n\u003c\/li\u003e\n            \u003cli\u003e\n\u003cspan class=\"attribute-name\"\u003eColor: \u003c\/span\u003e\u003cspan class=\"attribute-value\"\u003eBlack\u003c\/span\u003e\n\u003c\/li\u003e\n\n        \u003c\/ul\u003e\u003ch3\u003eGarmin 101107604 Features \u0026amp; Benefits\u003c\/h3\u003e\n          \u003cul\u003e\n              \u003cli class=\"feature\"\u003eExtend Your NMEA 2000 Backbone With Our Backbone\/Drop Cables\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eCompatible With EchoMAP ® CHIRP 52cv, 52dv\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eGarmin Offer Products With Essential Utility\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eAwe-Inspiring Designs, Impeccable Quality, And Superior Reliability\u003c\/li\u003e\n              \u003cli class=\"feature\"\u003eLimited 1 Year Warranty\u003c\/li\u003e\n          \u003c\/ul\u003e\u003ch3\u003eGarmin 101107604 Warranties\u003c\/h3\u003e\n            \u003cul\u003e\n                \u003cli\u003e\u003ca href=\"https:\/\/vehiclepartimages.com\/PMDT\/GAR\/Warranty\/garmin-marine-warranty-policy.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003egarmin-marine-warranty-policy.pdf\u003c\/a\u003e\u003c\/li\u003e\n            \u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eNMEA 2000® Backbone\/Drop Cable\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eExtend your NMEA 2000® backbone with Garmin's 13' (4M) backbone\/drop cable.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompatible Devices:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAIS™ 300\/600 Blackbox Transceiver\u003c\/li\u003e\n\u003cli\u003eGBT™ 10\u003c\/li\u003e\n\u003cli\u003eGCL™ 20 Low-light Imaging Camera\u003c\/li\u003e\n\u003cli\u003eGDL™ 40\u003c\/li\u003e\n\u003cli\u003eGET™ 10\u003c\/li\u003e\n\u003cli\u003eGFL™ 10\u003c\/li\u003e\n\u003cli\u003eGFS™ 10\u003c\/li\u003e\n\u003cli\u003eGHP™ 12 Autopilot System\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™\u003c\/li\u003e\n\u003cli\u003eGHP™ 20 Marine Autopilot System with SmartPump\u003c\/li\u003e\n\u003cli\u003eGMI™ 10\/20 Marine Instrument\u003c\/li\u003e\n\u003cli\u003eGPS 19x NMEA 2000®\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGPSMAP® Series\u003c\/li\u003e\n\u003cli\u003eVHF 200\/300 Marine Radio\u003c\/li\u003e\n\u003cli\u003eVHF 300 AIS\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003cbr\u003eUse our 13' backbone\/branch cables to extend your NMEA 2000 backbone network. Use this cable to extend and customize the NMEA 2000 network on board.\n\n            \u003cbr\u003e\n            \u003cb\u003eSKU:\u003c\/b\u003e NVN-50468\u003cbr\u003e\n            \u003cb\u003eMPN:\u003c\/b\u003e 010-11076-04\u003cbr\u003e\n            \u003cb\u003eUPC:\u003c\/b\u003e 753759978198\u003cbr\u003e\n            ","brand":"Garmin","offers":[{"title":"Default Title","offer_id":32536571215965,"sku":"50468","price":29.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0299\/7266\/0317\/products\/garmin-nmea-2000-backbone-1_28628ab8-460f-47b9-9ac6-7786c8d53cb2.jpg?v=1673085824"}],"url":"https:\/\/nvnmarine.com\/collections\/nmea-2000-networking.oembed?page=8","provider":"NVN Marine","version":"1.0","type":"link"}