Sea-Dog 1 AWG Red Battery Cable, 25 Foot Tinned Copper
Sea-Dog 1 AWG Red Battery Cable, 25 Foot Tinned Copper — Product description
The Sea-Dog 1 AWG Red Battery Cable gives you 25 feet of tinned copper stranded wire for the heavy DC runs on your boat. It's a UL Listed boat cable rated 600V and 105°C dry, with oil resistant insulation, made in the U.S.A.
If you've ever tried to start an engine on a cable that's too thin, you know the symptoms. Slow cranking, warm lugs, a voltage drop you can see on the meter. The Sea-Dog 1 AWG Red Battery Cable is a 25 foot length of heavy tinned copper cable built for the high-current runs on a boat, the ones where you can't afford to skimp on conductor size.
It's tinned copper stranded wire, and both of those details matter out there. Stranding keeps the cable flexible enough to route through a bilge or around an engine bed without fighting you. Tinning helps the copper stand up to the damp, salty air that gets into every corner of a boat. The insulation is rated 600V and 105°C dry (75°C wet), and it's oil resistant, which is exactly what you want when the cable lives near an engine. Sea-Dog lists it as a UL Listed Boat Cable made in the U.S.A.
The red jacket isn't just for looks. Battery cable is offered in all colors in accordance with ABYC standard, and red is the color most boaters expect on the positive side. Pick up the matching black in the same gauge for the negative run and you've got a pair that's easy to trace months or years later when you're troubleshooting at the dock.
Where does a 1 AWG cable earn its keep? Think battery to starter on a larger engine, battery to a battery switch, and the feeds that connect house banks and charging sources. It's also a common choice for the heavy leg between a battery and a windlass or an inverter, depending on the load and the distance. We don't list an amp rating for this cable, so size it the way you'd size any high-current run. Check the current your equipment draws, measure your run length, and follow the equipment maker's wire size chart or the ABYC guidance for allowable voltage drop.
A 25 foot length gives you a lot of room to work. For many boats that's enough to build a main run with some left over for a second cable. It ships in a box that measures 5 inches high by 7 inches wide by 7 inches long and weighs about 9 pounds, which tells you right away this is serious copper, not hookup wire. Sold as one 25 foot length, so you'll cut it to size for your run.
Cutting and terminating it takes the right tools. A cable this size needs a proper hydraulic or heavy-duty hammer crimper and lugs sized for 1 AWG, not the little hand crimper in the drawer. Good crimps matter more than most people think. A loose or half-crushed lug is the usual reason a big cable runs hot. Seal the ends with adhesive-lined heat shrink so moisture stays out of the strands, and keep the cable supported so it doesn't chafe on edges or sit in standing water.
A few install habits will pay off. Keep the positive run as short and direct as you can, because every extra foot adds resistance. Put a fuse or circuit protection close to the battery on the positive side, sized for the cable and the load. Use clamps or clips along the route so the cable can't swing around when the boat's pounding through chop. And label both ends, because you'll thank yourself later.
Whether you're rewiring a tired starting circuit on an older outboard cruiser, building out a battery bank on a center console, or replacing a cable that's finally corroded through, this is a straightforward, no-frills heavy cable from a name boaters know. It's not a fancy product. It's the kind of gear that does its job quietly and keeps the boat starting. That's what you want from battery cable.
Key Features
- 1 AWG conductor size for high-current battery, starter, and switch runs
- Tinned copper stranded wire for flexibility and better corrosion resistance in damp conditions
- Rated 600V, 105°C dry (75°C wet) so it holds up in warm engine spaces
- Oil resistant insulation for use around engines and bilges
- UL Listed Boat Cable, made in the U.S.A.
- Red jacket for the positive side, with other colors available for the negative run
- 25 foot length gives you room to build a full run and cut to fit
Why Buy from NVN Marine
- Authorized Sea-Dog reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Sea-Dog 1 AWG Red Battery Cable - 25' |
|---|---|
| Brand | Sea-Dog |
| Manufacturer Part Number | 8001020 |
| UPC | 035514800570 |
| Color | Red |
| Gauge | 1 AWG |
| Length | 25 ft |
| Conductor | Tinned Copper Stranded Wire |
| Voltage Rating | 600V |
| Temperature Rating | 105°C Dry (75°C Wet) |
| Insulation | Oil Resistant |
| Listing | UL Listed Boat Cable |
| Weight | 9 lbs |
| Package Dimensions (L x W x H) | 7" x 7" x 5" |
| Country of Origin | United States |
Frequently asked questions
What size is the Sea-Dog 1 AWG battery cable?
It's 1 AWG gauge and sold as a 25 foot length in red.
What is the conductor made of?
It's tinned copper stranded wire. Tinning helps protect the copper in damp, salty conditions, and stranding keeps the cable flexible.
What temperature and voltage is it rated for?
Sea-Dog lists it at 600V and 105°C dry (75°C wet). It's also oil resistant.
Is this cable UL Listed?
Yes. It's listed by Sea-Dog as a UL Listed Boat Cable made in the U.S.A.
Does it come in other colors?
Sea-Dog offers battery cable in all colors in accordance with ABYC standard. Red is typically used for positive and black for negative, so many boaters buy a matching pair.
Is the cable sold by the foot or as a single length?
This listing is a single 25 foot length. You'll cut it to the length your run needs.
Does it come with lugs or terminals?
No. The listing is for the cable only. You'll need lugs sized for 1 AWG, a suitable crimper, and heat shrink to finish your connections.
What can I use 1 AWG battery cable for?
It's a common size for heavy DC runs such as battery to starter, battery to battery switch, and connections between battery banks. Always size the cable to your load and run length using your equipment's wire chart or ABYC guidance.
How much does it weigh?
The boxed cable weighs about 9 pounds. The box measures 5 inches high by 7 inches wide by 7 inches long.
What is the Sea-Dog part number?
The manufacturer part number is 8001020.