Marinco

Marinco 37200 Waterproof Wiper Motor, 2.5in Shaft, 110 Degree

SKU: 1004907 · UPC: 035028372006 · MPN: 37200
★★★★★ 4.7 · 0 reviews
Authorized dealer48% off
$242.99
$470.13Save $227.14
or 4 payments of $60.74 with Affirm · See disclosures
In stock — Ships today Pickup Next-Day · Fort Lauderdale (FL)
SAME-DAY SHIPPING · 14:23 EST
Order in time, ships today
Ships from your nearest warehouse. UPS Ground 2–4 business days.
Free shipping
Orders $500 or more
Free returns
Within 30 days
Same day shipping
Order before 3 PM (EST)
Ask anything
We're here to help
$242.99
02 · Overview

Marinco 37200 Waterproof Wiper Motor, 2.5in Shaft, 110 Degree — Product description

The Marinco 37200 1000 Waterproof Wiper Motor is a 12V marine wiper motor with a 2.5 inch shaft and a 110 degree factory sweep. It's adjustable down to 50, 65, or 80 degrees, and the sealed housing is built to handle spray, sun, and hard use out on the water.

If you've ever had a wiper quit halfway across the glass in a chop, you know why the motor matters more than the blade. The Marinco 1000 Waterproof Wiper Motor is a 12V unit built to live on a boat, and this kit (part 37200) comes with a 2.5 inch shaft and a 110 degree sweep. It's a straightforward replacement or new install for a windshield that needs a wide, reliable arc.

Start with the housing. It's fully sealed and molded from UV stabilized, high-temperature, high-impact thermoplastic. That means spray, rain, and a hot summer sun on the dash aren't going to cook it or let water in. The drive shaft is knurled, with an anti-rotation design and a solid brass arm drive nut, so the arm stays put on the shaft instead of slipping when the glass gets dry or sticky.

Sweep is the part people ask about most. This kit is factory pre-set to 110 degrees, and the motor is adjustable to 50, 65, 80, or 110 degrees. So if your windshield is smaller, or you want a tighter arc, you can dial it down. Match your arm and blade to the sweep you set. At 110 degrees, the motor powers 16 inch Deluxe arm and blade combinations. At sweep settings of 80 degrees or less, it'll handle 18 inch Deluxe arm and blade combinations. One important note: it isn't compatible with pantograph arms.

Parking is handled with a coast to park feature. You can set it for right or left self parking, depending on where you want the blade to rest when you shut the wipers off. Handy if you've got a crowded windshield frame or a specific spot where the blade should tuck away.

Shaft length matters on this one. The 2.5 inch shaft in this kit includes a 0.5 inch length of knurled arm fitting. Marinco also makes the motor with a 1.5 inch shaft, so check the thickness of your mounting surface before you order. The shaft diameter is 0.625 inch (16 mm).

The electrical numbers are worth a look if you're sizing wire and a breaker. Stall current runs 9.8A to 10.0A. No load current is 0.8A to 1.2A. Stall torque is 55 in-lbs (63 kgf/cm, 6.2 Nm). The circuitry is RF shielded, which helps keep wiper noise out of your electronics. The retail version includes a 5A fuse and holder. An on/off switch isn't included, so plan on picking one up for your helm.

Size and weight are reasonable for tight spots behind a dash. The motor measures about 6.625 inches long by 3.375 inches wide by 2 inches deep and weighs 1.75 pounds. Marinco backs it with a 3 year warranty.

Who's it for? Boaters with a center console, a cuddy, or a pilothouse windshield who want a dependable wiper setup that won't corrode or seize after a season or two. It's also a good swap when an older motor has given up and you want a sealed unit to replace it. Check your arm type and sweep before you buy, and you're set.

Installing it is a matter of lining things up before you commit. Confirm your arm and blade are Deluxe style, pick the sweep that fits your glass, and choose the right or left park position. Then wire it through the supplied 5A fuse and holder and add your own on/off switch at the helm. Take a minute to check the shaft length against the thickness of your mounting surface, since the 2.5 inch version includes that 0.5 inch knurled arm fitting. That small bit of planning saves a second trip to the dock.

What's in the box is simple. You get the 1000 waterproof wiper motor with the 2.5 inch shaft and 110 degree sweep, plus the 5A fuse and holder. Arms and blades aren't part of this kit, and neither is the switch. Pair it with Deluxe arm and blade combinations sized to your sweep, and you've got a complete setup that's easy to live with season after season.

Key Features

  • 12V motor with a 110 degree factory sweep, so you get a wide arc across the windshield.
  • Adjustable to 50, 65, 80, or 110 degrees, which lets you tune the sweep to your glass.
  • Powers 16 inch Deluxe arm and blade combinations at 110 degrees, and 18 inch combinations at 80 degrees or less.
  • Fully sealed housing in UV stabilized, high-impact thermoplastic, so it stands up to spray and sun.
  • Knurled, anti-rotation drive shaft with a solid brass arm drive nut keeps the arm locked in place.
  • 2.5 inch shaft (includes a 0.5 inch knurled arm fitting) with a 0.625 inch (16 mm) diameter.
  • Coast to park with adjustable right or left self parking.
  • Stall torque of 55 in-lbs (6.2 Nm), with 0.8A to 1.2A draw at no load.
  • RF shielded circuitry to help keep wiper noise away from your electronics.
  • Retail version includes a 5A fuse and holder, and it's backed by a 3 year warranty.

Why Buy from NVN Marine

  • Authorized Marinco reseller, full manufacturer warranty
  • NMEA member and ABYC certified, advice from real boat techs
  • Same-day shipping before 3 PM ET on in-stock items
  • NY headquarters and Fort Lauderdale flagship retail store
NVN Marine — 11 W State Road 84, Fort Lauderdale, FL 33315 Available for pickup at our Fort Lauderdale store (Next-Day) $242.99
03 · The numbers

Technical specifications

Title Marinco 37200 1000 Waterproof Wiper Motor 2.5in Shaft Kit 110 Degree Sweep
Brand Marinco
Manufacturer Part Number 37200
UPC 035028372006
Voltage 12V
Sweep 110 degrees
Adjustable Sweep 50, 65, 80, or 110 degrees
Shaft Diameter 0.625" (16 mm)
Shaft Length 2.5" (includes 0.5" length of knurled arm fitting)
Dimensions 6.625" L x 3.375" W x 2" D
Weight 1.75 lbs
Stall Torque 55 in-lbs (63 kgf/cm, 6.2 Nm)
Stall Current 9.8A-10.0A
No Load Current 0.8A-1.2A
Housing UV stabilized, high-temperature, high-impact thermoplastic
Parking Coast to park, adjustable right or left self parking
Fuse 5A fuse and holder (retail version)
Warranty 3 Year
Included Wiper motor, 5A fuse and holder
04 · Before you buy

Frequently asked questions

What sweep does the Marinco 37200 wiper motor have?

This kit is factory pre-set to 110 degrees. The motor is adjustable to 50, 65, 80, or 110 degrees.

What size arm and blade will it power?

At a 110 degree sweep it powers 16 inch Deluxe arm and blade combinations. At sweep settings of 80 degrees or less, it powers 18 inch Deluxe arm and blade combinations.

Does it work with pantograph arms?

No. It isn't compatible with pantograph arms.

What voltage does it run on?

It's a 12V heavy-duty motor.

How much current does it draw?

Stall current is 9.8A to 10.0A, and no load current is 0.8A to 1.2A. Size your wire and fuse with the stall figure in mind.

Is a fuse included?

The retail version includes a 5A fuse and holder. An on/off switch isn't included.

How long is the shaft?

This kit has a 2.5 inch shaft, which includes a 0.5 inch length of knurled arm fitting. The shaft diameter is 0.625 inch (16 mm). A 1.5 inch shaft version is also available.

Can I choose where the blade parks?

Yes. The motor has coast to park with adjustable right or left self parking.

Is the motor waterproof?

The housing is fully sealed and made of UV stabilized, high-temperature, high-impact thermoplastic.

How big is it and what does it weigh?

It measures about 6.625 inches long by 3.375 inches wide by 2 inches deep and weighs 1.75 pounds.

What warranty does it have?

Marinco covers it with a 3 year warranty.

05 · Customer voices

Customer reviews