Hella Marine 500 Black Magic H3 Halogen Driving Lamp Kit, 6.4in
Hella Marine 500 Black Magic H3 Halogen Driving Lamp Kit, 6.4in — Product description
The Hella Marine 500 Black Magic kit is a set of 2 round, 6.4 inch halogen driving lamps with clear lenses and black housings. Each runs a 55 watt H3 bulb, and the harness, switch, and relay are in the box. If you want extra reach ahead of the boat at night, this kit gets you there.
If you've ever tried to find a channel marker or a dock piling on a dark night from a bigger boat, you know a little forward light goes a long way. This Hella Marine 500 Black Magic kit gives you a pair of 6.4 inch round driving lamps, each with a 55 watt H3 halogen bulb behind a clear lens. The housings are black, and each lamp sits on a universal stud mount with a pivoting bracket. It's a set of 2, so you're covered for both sides of an arch, a hardtop, or a bow rail.
Here's what's in the box, going by the distributor listing. You get 2 H3 halogen bulbs, 2 stone shields, a complete plug and play harness, a switch, a relay, and mounting instructions. That's the whole lighting circuit in one carton. You won't be hunting down a relay or a switch separately, and that's the part that trips up a lot of first-time light installs.
Let's talk about what a driving beam actually does. It's a focused beam meant to reach out ahead of the boat, not to flood the deck around you. That makes it a good fit for picking up a channel, a mooring field, or a ramp at a distance. It's a poor choice for a spreader light or for lighting up the work area at the stern. If you want to see your own deck, plan on a separate light for that. And on a small center console, aim these carefully. A beam pointed too flat can glare off the bow and bother other boats nearby.
The pivoting bracket is what makes aiming easy. Loosen the stud nut, tilt the lamp where you want it, snug it back down. Do that at dusk with the boat on the trailer or at the dock, because aiming in daylight is mostly guesswork. Whatever you mount to needs to be solid. Thin fiberglass around a single stud can crack or work loose over a season of vibration, so a backing plate behind the mounting surface is cheap insurance.
Wiring deserves a moment too. Two 55 watt bulbs pull roughly 9 amps together while they're lit. That's not huge, but on a long run from the battery to a bow rail or a tall arch, voltage drop will dim the lamps. Keep the run as short as you can and use heavier wire if the lights sit far from the power source. The relay in the kit is there so the switch only carries a small control current, and the heavy current goes through the relay instead. Mount the relay close to the battery, protect the circuit with a proper fuse, and seal your connections. Salt air eats bare copper and basic crimps quickly, so tinned wire, heat shrink, and a sealed fuse holder are worth the few extra dollars.
Heat is the other thing to plan for. Halogen housings get hot when they've been running a while. Keep them clear of vinyl, canvas, and gelcoat, and leave a few inches of breathing room. Don't tuck them under a cushion or a cover.
A word on the stone shields. They're included in the kit as listed, and they're a nod to the lamp's driving-lamp roots. They protect the lens from road debris, which is handy if you're using these on a tow vehicle or a trailer-bound boat. On the water they're mostly optional, and you'll decide whether you want them on or off based on how you mount the lamps.
Halogen H3 bulbs are simple and easy to find, which is a real plus when you're a long way from the dock. They do have limits. Hard pounding on a planing hull is tough on any filament, so it's smart to keep a spare bulb or two aboard. Replacement H3 bulbs are a common stock item, so you're not stuck with a proprietary part.
One more thing worth saying plainly. Forward-facing white lights are not a substitute for your required navigation lights. Treat these as extra visibility for slow, careful running and keep your nav lights on and working. Check the rules where you boat, and don't blind other captains.
Hardware matters on any boat, and black housings and pivot hardware can get tired in salt spray. A dab of dielectric grease on the electrical connections and a rinse after a salty day will help everything last longer. Check the lens seals and screws every so often, because water getting inside is the usual way lamps fail, not the bulb itself.
So who is this kit for? Cruisers and larger center consoles running at night with a bit of open water ahead. Anglers heading out before sunrise. Anyone adding a hardtop or arch who wants a matched pair with the wiring included. It's not meant for deck lighting, and it's not the kit for someone who wants a bright, low-draw LED setup. It's a straightforward halogen driving lamp kit from a name that's been lighting up boats and vehicles for a long time. Questions about fit or wiring? Give our crew a call. We're boat techs, and we're happy to talk it through.
Key Features
- 6.4 inch round housings, so you get a substantial driving beam without needing a huge mounting area.
- 55 watt H3 halogen bulbs, simple, common, and easy to replace.
- Driving beam pattern reaches out ahead of the boat for spotting channels, docks, and markers.
- Clear lens with a black housing for a clean look on a hardtop, arch, or rail.
- Universal stud mount with a pivoting bracket, so you can aim each lamp where you need it.
- Set of 2 lamps, matched for both sides of the boat.
- Complete plug and play harness, switch, and relay listed in the kit, so the circuit is covered.
- Includes 2 H3 halogen bulbs and 2 stone shields, with mounting instructions.
Why Buy from NVN Marine
- Authorized Hella Marine reseller, full manufacturer warranty
- NMEA member and ABYC certified, advice from real boat techs
- Same-day shipping before 3 PM ET on in-stock items
- NY headquarters and Fort Lauderdale flagship retail store
Technical specifications
| Title | Hella Marine 500 Black Magic Halogen Driving Lamp Kit, H3 55W, 6.4 Inch Round, Set of 2 |
|---|---|
| Brand | Hella Marine |
| Manufacturer Part Number | 005750991 |
| UPC | 760687120360 |
| Series | 500 Black Magic |
| Lamp Type | Halogen Driving Lamp |
| Bulb Type | H3 Halogen |
| Wattage | 55 Watt |
| Diameter | 6.4 Inch Round |
| Beam | Driving Beam |
| Lens | Clear |
| Housing | Black |
| Mounting | Universal Stud Mount With Pivoting Bracket |
| Quantity | Set of 2 |
| Included Bulbs | 2 H3 Halogen Bulbs |
| Included Shields | 2 Stone Shields |
| Included Wiring | Complete Plug and Play Harness |
| Included Controls | Switch and Relay |
| Included Documentation | Mounting Instructions |
Frequently asked questions
What size are these lamps?
Each lamp is 6.4 inches round. The kit is a set of 2.
What bulb do these use?
Each lamp uses an H3 halogen bulb rated at 55 watts. The kit includes 2 H3 halogen bulbs.
What comes in the kit?
The listing shows 2 H3 halogen bulbs, 2 stone shields, a complete plug and play harness, a switch, a relay, and mounting instructions, plus the two lamps.
Is the wiring harness included?
Yes. A complete plug and play harness, a switch, and a relay are listed with the kit.
What kind of beam pattern do they have?
They're driving beam lamps. That means a focused beam aimed ahead of the boat, not a wide flood. They aren't meant as deck or spreader lights.
How do I mount them?
Each lamp uses a universal stud mount with a pivoting bracket. Mount to a solid surface and use a backing plate on thin fiberglass. Loosen the stud nut to aim the lamp, then tighten it down.
How much current do they draw?
Two 55 watt bulbs add up to about 110 watts total, which works out to roughly 9 amps on a 12 volt system. Check the voltage rating on your kit's packaging before wiring, and fuse the circuit accordingly.
Can I use these as navigation lights?
No. They don't replace your required navigation lights. Use them as extra forward visibility and keep your nav lights on.
Do the lamps get hot?
Halogen lamps do run hot. Keep the housings clear of vinyl, canvas, and gelcoat and leave several inches of space around them.
What's the lens color?
Clear. The housings are black.
Are replacement bulbs easy to find?
H3 halogen bulbs are a common size. We carry H3 bulbs in other wattages, so check the 55 watt rating before you order a spare.
What's the manufacturer part number?
The manufacturer part number is 005750991 and the UPC is 760687120360.